Hi Paolo, please see my answers inline, thanks.
On Tue, 05 Jul 2022 09:33:16 +0200 Paolo Abeni pabeni@redhat.com wrote:
On Fri, 2022-07-01 at 17:01 +0200, Andrea Mayer wrote:
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of the SRv6 H.Encaps behavior [2].
H.Encaps.Red reduces the length of the SRH by excluding the first segment (SID) in the SRH of the pushed IPv6 header. The first SID is only placed in the IPv6 Destination Address field of the pushed IPv6 header. When the SRv6 Policy only contains one SID the SRH is omitted, unless there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2 [2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1
Signed-off-by: Andrea Mayer andrea.mayer@uniroma2.it Signed-off-by: Anton Makarov anton.makarov11235@gmail.com
include/uapi/linux/seg6_iptunnel.h | 1 + net/ipv6/seg6_iptunnel.c | 126 ++++++++++++++++++++++++++++- 2 files changed, 126 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/seg6_iptunnel.h b/include/uapi/linux/seg6_iptunnel.h index eb815e0d0ac3..538152a7b2c3 100644 --- a/include/uapi/linux/seg6_iptunnel.h +++ b/include/uapi/linux/seg6_iptunnel.h @@ -35,6 +35,7 @@ enum { SEG6_IPTUN_MODE_INLINE, SEG6_IPTUN_MODE_ENCAP, SEG6_IPTUN_MODE_L2ENCAP,
- SEG6_IPTUN_MODE_ENCAP_RED,
}; #endif diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c index d64855010948..4942073650d3 100644 --- a/net/ipv6/seg6_iptunnel.c +++ b/net/ipv6/seg6_iptunnel.c @@ -36,6 +36,7 @@ static size_t seg6_lwt_headroom(struct seg6_iptunnel_encap *tuninfo) case SEG6_IPTUN_MODE_INLINE: break; case SEG6_IPTUN_MODE_ENCAP:
- case SEG6_IPTUN_MODE_ENCAP_RED: head = sizeof(struct ipv6hdr); break; case SEG6_IPTUN_MODE_L2ENCAP:
@@ -195,6 +196,122 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto) } EXPORT_SYMBOL_GPL(seg6_do_srh_encap); +/* encapsulate an IPv6 packet within an outer IPv6 header with reduced SRH */ +static int seg6_do_srh_encap_red(struct sk_buff *skb,
struct ipv6_sr_hdr *osrh, int proto)+{
- __u8 first_seg = osrh->first_segment;
- struct dst_entry *dst = skb_dst(skb);
- struct net *net = dev_net(dst->dev);
- struct ipv6hdr *hdr, *inner_hdr;
- int hdrlen = ipv6_optlen(osrh);
- int red_tlv_offset, tlv_offset;
- struct ipv6_sr_hdr *isrh;
- bool skip_srh = false;
- __be32 flowlabel;
- int tot_len, err;
- int red_hdrlen;
- int tlvs_len;
- if (first_seg > 0) {
red_hdrlen = hdrlen - sizeof(struct in6_addr);- } else {
/* NOTE: if tag/flags and/or other TLVs are introduced in the* seg6_iptunnel infrastructure, they should be considered when* deciding to skip the SRH.*/skip_srh = !sr_has_hmac(osrh);red_hdrlen = skip_srh ? 0 : hdrlen;- }
- tot_len = red_hdrlen + sizeof(struct ipv6hdr);
- err = skb_cow_head(skb, tot_len + skb->mac_len);
- if (unlikely(err))
return err;- inner_hdr = ipv6_hdr(skb);
- flowlabel = seg6_make_flowlabel(net, skb, inner_hdr);
- skb_push(skb, tot_len);
- skb_reset_network_header(skb);
- skb_mac_header_rebuild(skb);
- hdr = ipv6_hdr(skb);
- /* based on seg6_do_srh_encap() */
- if (skb->protocol == htons(ETH_P_IPV6)) {
ip6_flow_hdr(hdr, ip6_tclass(ip6_flowinfo(inner_hdr)),flowlabel);hdr->hop_limit = inner_hdr->hop_limit;- } else {
ip6_flow_hdr(hdr, 0, flowlabel);hdr->hop_limit = ip6_dst_hoplimit(skb_dst(skb));memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));IP6CB(skb)->iif = skb->skb_iif;- }
- /* no matter if we have to skip the SRH or not, the first segment
* always comes in the pushed IPv6 header.*/- hdr->daddr = osrh->segments[first_seg];
- if (skip_srh) {
hdr->nexthdr = proto;set_tun_src(net, dst->dev, &hdr->daddr, &hdr->saddr);goto out;- }
- /* we cannot skip the SRH, slow path */
- hdr->nexthdr = NEXTHDR_ROUTING;
- isrh = (void *)hdr + sizeof(struct ipv6hdr);
- if (unlikely(!first_seg)) {
/* this is a very rare case; we have only one SID but* we cannot skip the SRH since we are carrying some* other info.*/memcpy(isrh, osrh, hdrlen);goto srcaddr;- }
- tlv_offset = sizeof(*osrh) + (first_seg + 1) * sizeof(struct in6_addr);
- red_tlv_offset = tlv_offset - sizeof(struct in6_addr);
- memcpy(isrh, osrh, red_tlv_offset);
- tlvs_len = hdrlen - tlv_offset;
- if (unlikely(tlvs_len > 0)) {
const void *s = (const void *)osrh + tlv_offset;void *d = (void *)isrh + red_tlv_offset;memcpy(d, s, tlvs_len);- }
- --isrh->first_segment;
- isrh->hdrlen -= 2;
+srcaddr:
- isrh->nexthdr = proto;
- set_tun_src(net, dst->dev, &hdr->daddr, &hdr->saddr);
+#ifdef CONFIG_IPV6_SEG6_HMAC
- if (unlikely(!skip_srh && sr_has_hmac(isrh))) {
err = seg6_push_hmac(net, &hdr->saddr, isrh);if (unlikely(err))return err;- }
+#endif
+out:
- skb_postpush_rcsum(skb, hdr, tot_len);
It looks like, at this point hdr->payload_len is not initialized yet - it will be set later by the caller. So the above will corrupt the checksum complete.
very good catch, thanks.
I think the solution is moving 'payload_len' initialization before the csum update. Note that 'seg6_do_srh_encap' has a similar issue.
Yes, but for doing this, we need to fix an issue which is pre-existing to my patch.
Taking a look at the code, I saw that the function 'seg6_do_srh_inline()' is also affected by the same problem. Specifically, it looks like this issue is present from the beginning, i.e.: commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels").
Therefore in a different patch, I will fix the 'seg6_do_srh()' code by moving the 'payload_len' initialization inside both seg6_do_srh_{encap,inline} functions (and before updating the csum, as you suggested). Since these functions are exported globally, we should also take care of the callers that will no longer have to initialize the 'payload_len' on their own.
In the new patch, I will credit you for having caught this bug (i.e. Reported-by tag) as well as I will add the link to this thread (i.e. Link tag) for documentation purposes.
Once we have fixed this issue, I will send an up-to-date v5; do you agree with this plan?
Ciao, Andrea