Use nft by default if it's supported, as nft is the replacement for iptables, which is used by default in some releases. Additionally, iptables is dropped in some releases.
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- CC nft developers to see if there are any easier configurations, as I'm not very familiar with nft commands. --- tools/testing/selftests/wireguard/netns.sh | 63 ++++++++++++++++++---- 1 file changed, 53 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index 405ff262ca93..4e29c1a7003c 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -44,6 +44,7 @@ sleep() { read -t "$1" -N 1 || true; } waitiperf() { pretty "${1//*-}" "wait for iperf:${3:-5201} pid $2"; while [[ $(ss -N "$1" -tlpH "sport = ${3:-5201}") != *"iperf3",pid=$2,fd=* ]]; do sleep 0.1; done; } waitncatudp() { pretty "${1//*-}" "wait for udp:1111 pid $2"; while [[ $(ss -N "$1" -ulpH 'sport = 1111') != *"ncat",pid=$2,fd=* ]]; do sleep 0.1; done; } waitiface() { pretty "${1//*-}" "wait for $2 to come up"; ip netns exec "$1" bash -c "while [[ $(< "/sys/class/net/$2/operstate") != up ]]; do read -t .1 -N 0 || true; done;"; } +use_nft() { nft --version &> /dev/null; }
cleanup() { set +e @@ -196,13 +197,23 @@ ip1 link set wg0 mtu 1300 ip2 link set wg0 mtu 1300 n1 wg set wg0 peer "$pub2" endpoint 127.0.0.1:2 n2 wg set wg0 peer "$pub1" endpoint 127.0.0.1:1 -n0 iptables -A INPUT -m length --length 1360 -j DROP +if use_nft; then + n0 nft add table inet filter + n0 nft add chain inet filter INPUT { type filter hook input priority filter ; policy accept ; } + n0 nft add rule inet filter INPUT meta length 1360 counter drop +else + n0 iptables -A INPUT -m length --length 1360 -j DROP +fi n1 ip route add 192.168.241.2/32 dev wg0 mtu 1299 n2 ip route add 192.168.241.1/32 dev wg0 mtu 1299 n2 ping -c 1 -W 1 -s 1269 192.168.241.1 n2 ip route delete 192.168.241.1/32 dev wg0 mtu 1299 n1 ip route delete 192.168.241.2/32 dev wg0 mtu 1299 -n0 iptables -F INPUT +if use_nft; then + n0 nft delete table inet filter +else + n0 iptables -F INPUT +fi
ip1 link set wg0 mtu $orig_mtu ip2 link set wg0 mtu $orig_mtu @@ -334,7 +345,13 @@ waitiface $netns2 veths n0 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward' n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout' n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout_stream' -n0 iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d 10.0.0.0/24 -j SNAT --to 10.0.0.1 +if use_nft; then + n0 nft add table inet nat + n0 nft add chain inet nat POSTROUTING { type nat hook postrouting priority srcnat; policy accept ; } + n0 nft add rule inet nat POSTROUTING ip saddr 192.168.1.0/24 ip daddr 10.0.0.0/24 counter snat to 10.0.0.1 +else + n0 iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d 10.0.0.0/24 -j SNAT --to 10.0.0.1 +fi
n1 wg set wg0 peer "$pub2" endpoint 10.0.0.100:2 persistent-keepalive 1 n1 ping -W 1 -c 1 192.168.241.2 @@ -348,10 +365,20 @@ n1 wg set wg0 peer "$pub2" persistent-keepalive 0 # Test that sk_bound_dev_if works n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # What about when the mark changes and the packet must be rerouted? -n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1 +if use_nft; then + n1 nft add table inet mangle + n1 nft add chain inet mangle OUTPUT { type route hook output priority mangle; policy accept ; } + n1 nft add rule inet mangle OUTPUT counter meta mark set 0x1 +else + n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1 +fi n1 ping -c 1 -W 1 192.168.241.2 # First the boring case n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # Then the sk_bound_dev_if case -n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1 +if use_nft; then + n1 nft delete table inet mangle +else + n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1 +fi
# Test that onion routing works, even when it loops n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5 @@ -385,16 +412,32 @@ n1 ping -W 1 -c 100 -f 192.168.99.7 n1 ping -W 1 -c 100 -f abab::1111
# Have ns2 NAT into wg0 packets from ns0, but return an icmp error along the right route. -n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2 -n0 iptables -t filter -A INPUT ! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit. +if use_nft; then + n2 nft add table inet nat + n2 nft add chain inet nat POSTROUTING { type nat hook postrouting priority srcnat; policy accept ; } + n2 nft add rule inet nat POSTROUTING ip saddr 10.0.0.0/24 ip daddr 192.168.241.0/24 counter snat to 192.168.241.2 + + n0 nft add table inet filter + n0 nft add chain inet filter INPUT { type filter hook input priority filter ; policy accept ; } + n0 nft add rule inet filter INPUT iifname "vethrs" ip saddr != 10.0.0.0/24 counter drop +else + n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2 + n0 iptables -t filter -A INPUT ! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit. +fi n2 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward' ip0 -4 route add 192.168.241.1 via 10.0.0.100 n2 wg set wg0 peer "$pub1" remove [[ $(! n0 ping -W 1 -c 1 192.168.241.1 || false) == *"From 10.0.0.100 icmp_seq=1 Destination Host Unreachable"* ]]
-n0 iptables -t nat -F -n0 iptables -t filter -F -n2 iptables -t nat -F +if use_nft; then + n0 nft delete table inet nat + n0 nft delete table inet filter + n2 nft delete table inet nat +else + n0 iptables -t nat -F + n0 iptables -t filter -F + n2 iptables -t nat -F +fi ip0 link del vethrc ip0 link del vethrs ip1 link del wg0