Adamos found the issue with the cached XFD state [1]. Although the XFD state is reset on the CPU hotplug, the per-CPU XFD cache is missing the reset. Then, running an AMX thread there, the staled value causes the kernel crash to kill the thread.
This is reproducible when moving an AMX thread to the hot-plugged CPU. So, add a test case to ensure no issue with that.
It repeats the test due to possible inconsistencies. Then, along with the hotplug cost, it will bring a noticeable runtime increase. But, the overall test has a quick turnaround time.
Link: https://lore.kernel.org/lkml/20230519112315.30616-1-attofari@amazon.de/ [1] Signed-off-by: Chang S. Bae chang.seok.bae@intel.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Dave Hansen dave.hansen@linux.intel.com Cc: Adamos Ttofari attofari@amazon.de Cc: Shuah Khan shuah@kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- The overall x86 selftest via "$ make TARGETS='x86' kselftest" takes about 3.5 -> 5.5 seconds. 'amx_64' itself took about 1.5 more seconds over 0.x seconds.
But, this overall runtime still takes in a matter of some seconds, which should be fine I thought. --- tools/testing/selftests/x86/amx.c | 133 ++++++++++++++++++++++++++++-- 1 file changed, 126 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/x86/amx.c b/tools/testing/selftests/x86/amx.c index d884fd69dd51..6f2f0598c706 100644 --- a/tools/testing/selftests/x86/amx.c +++ b/tools/testing/selftests/x86/amx.c @@ -3,6 +3,7 @@ #define _GNU_SOURCE #include <err.h> #include <errno.h> +#include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <stdio.h> @@ -25,6 +26,8 @@ # error This test is 64-bit only #endif
+#define BUF_LEN 1000 + #define XSAVE_HDR_OFFSET 512 #define XSAVE_HDR_SIZE 64
@@ -239,11 +242,10 @@ static inline uint64_t get_fpx_sw_bytes_features(void *buffer) }
/* Work around printf() being unsafe in signals: */ -#define SIGNAL_BUF_LEN 1000 -char signal_message_buffer[SIGNAL_BUF_LEN]; +char signal_message_buffer[BUF_LEN]; void sig_print(char *msg) { - int left = SIGNAL_BUF_LEN - strlen(signal_message_buffer) - 1; + int left = BUF_LEN - strlen(signal_message_buffer) - 1;
strncat(signal_message_buffer, msg, left); } @@ -767,15 +769,15 @@ static int create_threads(int num, struct futex_info *finfo) return 0; }
-static void affinitize_cpu0(void) +static inline void affinitize_cpu(int cpu) { cpu_set_t cpuset;
CPU_ZERO(&cpuset); - CPU_SET(0, &cpuset); + CPU_SET(cpu, &cpuset);
if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) - fatal_error("sched_setaffinity to CPU 0"); + fatal_error("sched_setaffinity to CPU %d", cpu); }
static void test_context_switch(void) @@ -784,7 +786,7 @@ static void test_context_switch(void) int i;
/* Affinitize to one CPU to force context switches */ - affinitize_cpu0(); + affinitize_cpu(0);
req_xtiledata_perm();
@@ -926,6 +928,121 @@ static void test_ptrace(void) err(1, "ptrace test"); }
+/* CPU Hotplug test */ + +static void __hotplug_cpu(int online, int cpu) +{ + char buf[BUF_LEN] = {}; + int fd, rc; + + strncat(buf, "/sys/devices/system/cpu/cpu", BUF_LEN); + snprintf(buf + strlen(buf), BUF_LEN - strlen(buf), "%d", cpu); + strncat(buf, "/online", BUF_LEN - strlen(buf)); + + fd = open(buf, O_RDWR); + if (fd == -1) + fatal_error("open()"); + + snprintf(buf, BUF_LEN, "%d", online); + rc = write(fd, buf, strlen(buf)); + if (rc == -1) + fatal_error("write()"); + + rc = close(fd); + if (rc == -1) + fatal_error("close()"); +} + +static void offline_cpu(int cpu) +{ + __hotplug_cpu(0, cpu); +} + +static void online_cpu(int cpu) +{ + __hotplug_cpu(1, cpu); +} + +static jmp_buf jmpbuf; + +static void handle_sigsegv(int sig, siginfo_t *si, void *ctx_void) +{ + siglongjmp(jmpbuf, 1); +} + +#define RETRY 5 + +/* + * Sanity-check the hotplug CPU for its (re-)initialization. + * + * Create an AMX thread on a CPU, while the hotplug CPU went offline. + * Then, plug the offlined back, and move the thread to run on it. + * + * Repeat this multiple times to ensure no inconsistent failure. + * If something goes wrong, the thread will get a signal or killed. + */ +static void *switch_cpus(void *arg) +{ + int *result = (int *)arg; + int i = 0; + + affinitize_cpu(0); + offline_cpu(1); + load_rand_tiledata(stashed_xsave); + + sethandler(SIGSEGV, handle_sigsegv, SA_ONSTACK); + for (i = 0; i < RETRY; i++) { + if (i > 0) { + affinitize_cpu(0); + offline_cpu(1); + } + if (sigsetjmp(jmpbuf, 1) == 0) { + online_cpu(1); + affinitize_cpu(1); + } else { + *result = 1; + goto out; + } + } + *result = 0; +out: + clearhandler(SIGSEGV); + return result; +} + +static void test_cpuhp(void) +{ + int max_cpu_num = sysconf(_SC_NPROCESSORS_ONLN) - 1; + void *thread_retval; + pthread_t thread; + int result, rc; + + if (!max_cpu_num) { + printf("[SKIP]\tThe running system has no more CPU for the hotplug test.\n"); + return; + } + + printf("[RUN]\tTest AMX use with the CPU hotplug.\n"); + + if (pthread_create(&thread, NULL, switch_cpus, &result)) + fatal_error("pthread_create()"); + + rc = pthread_join(thread, &thread_retval); + + if (rc) + fatal_error("pthread_join()"); + + /* + * Either an invalid retval or a failed result indicates + * the test failure. + */ + if (thread_retval != &result || result != 0) + printf("[FAIL]\tThe AMX thread had an issue (%s).\n", + thread_retval != &result ? "killed" : "signaled"); + else + printf("[OK]\tThe AMX thread had no issue.\n"); +} + int main(void) { /* Check hardware availability at first */ @@ -948,6 +1065,8 @@ int main(void)
test_ptrace();
+ test_cpuhp(); + clearhandler(SIGILL); free_stashed_xsave();
base-commit: 7877cb91f1081754a1487c144d85dc0d2e2e7fc4