On Mon, Apr 15, 2024 at 11:32 AM Muhammad Usama Anjum usama.anjum@collabora.com wrote:
Please fix following for this and fifth patch as well:
--> checkpatch.pl --codespell tools/testing/selftests/mm/mseal_test.c
WARNING: Macros with flow control statements should be avoided #42: FILE: tools/testing/selftests/mm/mseal_test.c:42: +#define FAIL_TEST_IF_FALSE(c) do {\
if (!(c)) {\
ksft_test_result_fail("%s, line:%d\n", __func__,
__LINE__);\
goto test_end;\
} \
} \
while (0)
WARNING: Macros with flow control statements should be avoided #50: FILE: tools/testing/selftests/mm/mseal_test.c:50: +#define SKIP_TEST_IF_FALSE(c) do {\
if (!(c)) {\
ksft_test_result_skip("%s, line:%d\n", __func__,
__LINE__);\
goto test_end;\
} \
} \
while (0)
WARNING: Macros with flow control statements should be avoided #59: FILE: tools/testing/selftests/mm/mseal_test.c:59: +#define TEST_END_CHECK() {\
ksft_test_result_pass("%s\n", __func__);\
return;\
+test_end:\
return;\
+}
I tried to fix those warnings of checkpatch in the past, but no good solution. If I put the condition check in the test, the code will have too many "if" and decrease readability. If there is a better solution, I'm happy to do that, suggestions are welcome.
On 4/15/24 9:35 PM, jeffxu@chromium.org wrote:
From: Jeff Xu jeffxu@chromium.org
selftest for memory sealing change in mmap() and mseal().
Signed-off-by: Jeff Xu jeffxu@chromium.org
tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/mseal_test.c | 1836 +++++++++++++++++++++++ 3 files changed, 1838 insertions(+) create mode 100644 tools/testing/selftests/mm/mseal_test.c
diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index d26e962f2ac4..98eaa4590f11 100644 --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -47,3 +47,4 @@ mkdirty va_high_addr_switch hugetlb_fault_after_madv hugetlb_madv_vs_map +mseal_test diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index eb5f39a2668b..95d10fe1b3c1 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -59,6 +59,7 @@ TEST_GEN_FILES += mlock2-tests TEST_GEN_FILES += mrelease_test TEST_GEN_FILES += mremap_dontunmap TEST_GEN_FILES += mremap_test +TEST_GEN_FILES += mseal_test TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += pagemap_ioctl TEST_GEN_FILES += thuge-gen diff --git a/tools/testing/selftests/mm/mseal_test.c b/tools/testing/selftests/mm/mseal_test.c new file mode 100644 index 000000000000..06c780d1d8e5 --- /dev/null +++ b/tools/testing/selftests/mm/mseal_test. +static void __write_pkey_reg(u64 pkey_reg) +{ +#if defined(__i386__) || defined(__x86_64__) /* arch */
unsigned int eax = pkey_reg;
unsigned int ecx = 0;
unsigned int edx = 0;
asm volatile(".byte 0x0f,0x01,0xef\n\t"
: : "a" (eax), "c" (ecx), "d" (edx));
assert(pkey_reg == __read_pkey_reg());
Use ksft_exit_fail_msg instead of assert to stay inside TAP format if condition is false and error is generated.
I can remove the usage of assert() from the test.
+int main(int argc, char **argv) +{
bool test_seal = seal_support();
ksft_print_header();
if (!test_seal)
ksft_exit_skip("sealing not supported, check CONFIG_64BIT\n");
if (!pkey_supported())
ksft_print_msg("PKEY not supported\n");
ksft_set_plan(80);
test_seal_addseal();
test_seal_unmapped_start();
test_seal_unmapped_middle();
test_seal_unmapped_end();
test_seal_multiple_vmas();
test_seal_split_start();
test_seal_split_end();
test_seal_invalid_input();
test_seal_zero_length();
test_seal_twice();
test_seal_mprotect(false);
test_seal_mprotect(true);
test_seal_start_mprotect(false);
test_seal_start_mprotect(true);
test_seal_end_mprotect(false);
test_seal_end_mprotect(true);
test_seal_mprotect_unalign_len(false);
test_seal_mprotect_unalign_len(true);
test_seal_mprotect_unalign_len_variant_2(false);
test_seal_mprotect_unalign_len_variant_2(true);
test_seal_mprotect_two_vma(false);
test_seal_mprotect_two_vma(true);
test_seal_mprotect_two_vma_with_split(false);
test_seal_mprotect_two_vma_with_split(true);
test_seal_mprotect_partial_mprotect(false);
test_seal_mprotect_partial_mprotect(true);
test_seal_mprotect_two_vma_with_gap(false);
test_seal_mprotect_two_vma_with_gap(true);
test_seal_mprotect_merge(false);
test_seal_mprotect_merge(true);
test_seal_mprotect_split(false);
test_seal_mprotect_split(true);
test_seal_munmap(false);
test_seal_munmap(true);
test_seal_munmap_two_vma(false);
test_seal_munmap_two_vma(true);
test_seal_munmap_vma_with_gap(false);
test_seal_munmap_vma_with_gap(true);
test_munmap_start_freed(false);
test_munmap_start_freed(true);
test_munmap_middle_freed(false);
test_munmap_middle_freed(true);
test_munmap_end_freed(false);
test_munmap_end_freed(true);
test_seal_mremap_shrink(false);
test_seal_mremap_shrink(true);
test_seal_mremap_expand(false);
test_seal_mremap_expand(true);
test_seal_mremap_move(false);
test_seal_mremap_move(true);
test_seal_mremap_shrink_fixed(false);
test_seal_mremap_shrink_fixed(true);
test_seal_mremap_expand_fixed(false);
test_seal_mremap_expand_fixed(true);
test_seal_mremap_move_fixed(false);
test_seal_mremap_move_fixed(true);
test_seal_mremap_move_dontunmap(false);
test_seal_mremap_move_dontunmap(true);
test_seal_mremap_move_fixed_zero(false);
test_seal_mremap_move_fixed_zero(true);
test_seal_mremap_move_dontunmap_anyaddr(false);
test_seal_mremap_move_dontunmap_anyaddr(true);
test_seal_discard_ro_anon(false);
test_seal_discard_ro_anon(true);
test_seal_discard_ro_anon_on_rw(false);
test_seal_discard_ro_anon_on_rw(true);
test_seal_discard_ro_anon_on_shared(false);
test_seal_discard_ro_anon_on_shared(true);
test_seal_discard_ro_anon_on_filebacked(false);
test_seal_discard_ro_anon_on_filebacked(true);
test_seal_mmap_overwrite_prot(false);
test_seal_mmap_overwrite_prot(true);
test_seal_mmap_expand(false);
test_seal_mmap_expand(true);
test_seal_mmap_shrink(false);
test_seal_mmap_shrink(true);
test_seal_merge_and_split();
test_seal_zero_address();
test_seal_discard_ro_anon_on_pkey(false);
test_seal_discard_ro_anon_on_pkey(true);
ksft_finished();
return 0;
The return isn't needed as ksft_finished() calls exit() with right exit code.
Sure. I can remove "return 0"
Thanks -Jeff
- Jeff
+}
-- BR, Muhammad Usama Anjum