On 6/8/21 4:40 AM, Andrea Mayer wrote:
this selftest is designed for evaluating the new SRv6 End.DT46 Behavior used, in this example, for implementing IPv4/IPv6 L3 VPN use cases.
Signed-off-by: Andrea Mayer andrea.mayer@uniroma2.it Signed-off-by: Paolo Lungaroni paolo.lungaroni@uniroma2.it
.../selftests/net/srv6_end_dt46_l3vpn_test.sh | 573 ++++++++++++++++++ 1 file changed, 573 insertions(+) create mode 100755 tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
diff --git a/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh new file mode 100755 index 000000000000..d1e156433b98 --- /dev/null +++ b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh @@ -0,0 +1,573 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# author: Andrea Mayer andrea.mayer@uniroma2.it +# author: Paolo Lungaroni paolo.lungaroni@uniroma2.it
+# This test is designed for evaluating the new SRv6 End.DT46 Behavior used for +# implementing IPv4/IPv6 L3 VPN use cases. +# +# The current SRv6 code in the Linux kernel only implements SRv6 End.DT4 and +# End.DT6 Behaviors which can be used respectively to support IPv4-in-IPv6 and +# IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a +# single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic. +# The SRv6 End.DT46 Behavior implementation is meant to support the +# decapsulation of IPv4 and IPv6 traffic coming from a single SRv6 tunnel. +# Therefore, the SRv6 End.DT46 Behavior in the Linux kernel greatly simplifies +# the setup and operations of SRv6 VPNs. +# +# Hereafter a network diagram is shown, where two different tenants (named 100 +# and 200) offer IPv4/IPv6 L3 VPN services allowing hosts to communicate with +# each other across an IPv6 network. +# +# Only hosts belonging to the same tenant (and to the same VPN) can communicate +# with each other. Instead, the communication among hosts of different tenants +# is forbidden. +# In other words, hosts hs-t100-1 and hs-t100-2 are connected through the +# IPv4/IPv6 L3 VPN of tenant 100 while hs-t200-3 and hs-t200-4 are connected +# using the IPv4/IPv6 L3 VPN of tenant 200. Cross connection between tenant 100 +# and tenant 200 is forbidden and thus, for example, hs-t100-1 cannot reach +# hs-t200-3 and vice versa. +# +# Routers rt-1 and rt-2 implement IPv4/IPv6 L3 VPN services leveraging the SRv6 +# architecture. The key components for such VPNs are: a) SRv6 Encap behavior, +# b) SRv6 End.DT46 Behavior and c) VRF. +# +# To explain how an IPv4/IPv6 L3 VPN based on SRv6 works, let us briefly +# consider an example where, within the same domain of tenant 100, the host +# hs-t100-1 pings the host hs-t100-2. +# +# First of all, L2 reachability of the host hs-t100-2 is taken into account by +# the router rt-1 which acts as a arp/ndp proxy. +# +# When the host hs-t100-1 sends an IPv6 or IPv4 packet destined to hs-t100-2, +# the router rt-1 receives the packet on the internal veth-t100 interface. Such +# interface is enslaved to the VRF vrf-100 whose associated table contains the +# SRv6 Encap route for encapsulating any IPv6 or IPv4 packet in a IPv6 plus the +# Segment Routing Header (SRH) packet. This packet is sent through the (IPv6) +# core network up to the router rt-2 that receives it on veth0 interface. +# +# The rt-2 router uses the 'localsid' routing table to process incoming +# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these +# packets, the SRv6 End.DT46 Behavior removes the outer IPv6+SRH headers and +# performs the lookup on the vrf-100 table using the destination address of +# the decapsulated IPv6 or IPv4 packet. Afterwards, the packet is sent to the +# host hs-t100-2 through the veth-t100 interface. +# +# The ping response follows the same processing but this time the role of rt-1 +# and rt-2 are swapped. +# +# Of course, the IPv4/IPv6 L3 VPN for tenant 200 works exactly as the IPv4/IPv6 +# L3 VPN for tenant 100. In this case, only hosts hs-t200-3 and hs-t200-4 are +# able to connect with each other. +# +# +# +-------------------+ +-------------------+ +# | | | | +# | hs-t100-1 netns | | hs-t100-2 netns | +# | | | | +# | +-------------+ | | +-------------+ | +# | | veth0 | | | | veth0 | | +# | | cafe::1/64 | | | | cafe::2/64 | | +# | | 10.0.0.1/24 | | | | 10.0.0.2/24 | | +# | +-------------+ | | +-------------+ | +# | . | | . | +# +-------------------+ +-------------------+ +# . . +# . . +# . . +# +-----------------------------------+ +-----------------------------------+ +# | . | | . | +# | +---------------+ | | +---------------- | +# | | veth-t100 | | | | veth-t100 | | +# | | cafe::254/64 | | | | cafe::254/64 | | +# | | 10.0.0.254/24 | +----------+ | | +----------+ | 10.0.0.254/24 | | +# | +-------+-------+ | localsid | | | | localsid | +-------+-------- | +# | | | table | | | | table | | | +# | +----+----+ +----------+ | | +----------+ +----+----+ | +# | | vrf-100 | | | | vrf-100 | | +# | +---------+ +------------+ | | +------------+ +---------+ | +# | | veth0 | | | | veth0 | | +# | | fd00::1/64 |.|...|.| fd00::2/64 | | +# | +---------+ +------------+ | | +------------+ +---------+ | +# | | vrf-200 | | | | vrf-200 | | +# | +----+----+ | | +----+----+ | +# | | | | | | +# | +-------+-------+ | | +-------+-------- | +# | | veth-t200 | | | | veth-t200 | | +# | | cafe::254/64 | | | | cafe::254/64 | | +# | | 10.0.0.254/24 | | | | 10.0.0.254/24 | | +# | +---------------+ rt-1 netns | | rt-2 netns +---------------- | +# | . | | . | +# +-----------------------------------+ +-----------------------------------+ +# . . +# . . +# . . +# . . +# +-------------------+ +-------------------+ +# | . | | . | +# | +-------------+ | | +-------------+ | +# | | veth0 | | | | veth0 | | +# | | cafe::3/64 | | | | cafe::4/64 | | +# | | 10.0.0.3/24 | | | | 10.0.0.4/24 | | +# | +-------------+ | | +-------------+ | +# | | | | +# | hs-t200-3 netns | | hs-t200-4 netns | +# | | | | +# +-------------------+ +-------------------+ +# +# +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# | Network configuration | +# ~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# rt-1: localsid table (table 90) +# +--------------------------------------------------+ +# |SID |Action | +# +--------------------------------------------------+ +# |fc00:21:100::6046|apply SRv6 End.DT46 vrftable 100| +# +--------------------------------------------------+ +# |fc00:21:200::6046|apply SRv6 End.DT46 vrftable 200| +# +--------------------------------------------------+ +# +# rt-1: VRF tenant 100 (table 100) +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::2 |apply seg6 encap segs fc00:12:100::6046| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth-t100 | +# +---------------------------------------------------+ +# |10.0.0.2 |apply seg6 encap segs fc00:12:100::6046| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth-t100 | +# +---------------------------------------------------+ +# +# rt-1: VRF tenant 200 (table 200) +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::4 |apply seg6 encap segs fc00:12:200::6046| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth-t200 | +# +---------------------------------------------------+ +# |10.0.0.4 |apply seg6 encap segs fc00:12:200::6046| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth-t200 | +# +---------------------------------------------------+ +# +# +# rt-2: localsid table (table 90) +# +--------------------------------------------------+ +# |SID |Action | +# +--------------------------------------------------+ +# |fc00:12:100::6046|apply SRv6 End.DT46 vrftable 100| +# +--------------------------------------------------+ +# |fc00:12:200::6046|apply SRv6 End.DT46 vrftable 200| +# +--------------------------------------------------+ +# +# rt-2: VRF tenant 100 (table 100) +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::1 |apply seg6 encap segs fc00:21:100::6046| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth-t100 | +# +---------------------------------------------------+ +# |10.0.0.1 |apply seg6 encap segs fc00:21:100::6046| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth-t100 | +# +---------------------------------------------------+ +# +# rt-2: VRF tenant 200 (table 200) +# +---------------------------------------------------+ +# |host |Action | +# +---------------------------------------------------+ +# |cafe::3 |apply seg6 encap segs fc00:21:200::6046| +# +---------------------------------------------------+ +# |cafe::/64 |forward to dev veth-t200 | +# +---------------------------------------------------+ +# |10.0.0.3 |apply seg6 encap segs fc00:21:200::6046| +# +---------------------------------------------------+ +# |10.0.0.0/24|forward to dev veth-t200 | +# +---------------------------------------------------+ +#
Great description of the test; thanks for adding that documentation.
Acked-by: David Ahern dsahern@kernel.org