Add a more complete HID-BPF example.
Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com
---
changes in v11: - use samples/hid instead of samples/bpf
no changes in v10
changes in v9: - extend the usage section - add sleep while waiting - changed the title of the commit
no changes in v8
changes in v7: - remove unnecessary __must_check definition
new in v6 --- samples/hid/.gitignore | 1 + samples/hid/Makefile | 5 +- samples/hid/hid_surface_dial.bpf.c | 161 ++++++++++++++++++++ samples/hid/hid_surface_dial.c | 231 +++++++++++++++++++++++++++++ 4 files changed, 397 insertions(+), 1 deletion(-) create mode 100644 samples/hid/hid_surface_dial.bpf.c create mode 100644 samples/hid/hid_surface_dial.c
diff --git a/samples/hid/.gitignore b/samples/hid/.gitignore index 8cb45592e29a..3ea0fed3bbad 100644 --- a/samples/hid/.gitignore +++ b/samples/hid/.gitignore @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only hid_mouse +hid_surface_dial *.out *.skel.h /vmlinux.h diff --git a/samples/hid/Makefile b/samples/hid/Makefile index f52b2d811976..e8d9f1451b9e 100644 --- a/samples/hid/Makefile +++ b/samples/hid/Makefile @@ -7,6 +7,7 @@ pound := #
# List of programs to build tprogs-y += hid_mouse +tprogs-y += hid_surface_dial
# Libbpf dependencies LIBBPF_SRC = $(TOOLS_PATH)/lib/bpf @@ -16,6 +17,7 @@ LIBBPF_INCLUDE = $(LIBBPF_DESTDIR)/include LIBBPF = $(LIBBPF_OUTPUT)/libbpf.a
hid_mouse-objs := hid_mouse.o +hid_surface_dial-objs := hid_surface_dial.o
# Tell kbuild to always build the programs always-y := $(tprogs-y) @@ -153,6 +155,7 @@ libbpf_hdrs: $(LIBBPF) .PHONY: libbpf_hdrs
$(obj)/hid_mouse.o: $(obj)/hid_mouse.skel.h +$(obj)/hid_surface_dial.o: $(obj)/hid_surface_dial.skel.h
-include $(HID_SAMPLES_PATH)/Makefile.target
@@ -197,7 +200,7 @@ $(obj)/%.bpf.o: $(src)/%.bpf.c $(obj)/vmlinux.h -I$(LIBBPF_INCLUDE) $(CLANG_SYS_INCLUDES) \ -c $(filter %.bpf.c,$^) -o $@
-LINKED_SKELS := hid_mouse.skel.h +LINKED_SKELS := hid_mouse.skel.h hid_surface_dial.skel.h clean-files += $(LINKED_SKELS)
hid_mouse.skel.h-deps := hid_mouse.bpf.o diff --git a/samples/hid/hid_surface_dial.bpf.c b/samples/hid/hid_surface_dial.bpf.c new file mode 100644 index 000000000000..16c821d3decf --- /dev/null +++ b/samples/hid/hid_surface_dial.bpf.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2022 Benjamin Tissoires + */ + +#include "vmlinux.h" +#include <bpf/bpf_helpers.h> +#include <bpf/bpf_tracing.h> + +#define HID_UP_BUTTON 0x0009 +#define HID_GD_WHEEL 0x0038 + +/* following are kfuncs exported by HID for HID-BPF */ +extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, + unsigned int offset, + const size_t __sz) __ksym; +extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, + __u8 *data, + size_t buf__sz, + enum hid_report_type type, + enum hid_class_request reqtype) __ksym; + +struct attach_prog_args { + int prog_fd; + unsigned int hid; + int retval; +}; + +SEC("syscall") +int attach_prog(struct attach_prog_args *ctx) +{ + ctx->retval = hid_bpf_attach_prog(ctx->hid, + ctx->prog_fd, + 0); + return 0; +} + +SEC("fmod_ret/hid_bpf_device_event") +int BPF_PROG(hid_event, struct hid_bpf_ctx *hctx) +{ + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 9 /* size */); + + if (!data) + return 0; /* EPERM check */ + + /* Touch */ + data[1] &= 0xfd; + + /* X */ + data[4] = 0; + data[5] = 0; + + /* Y */ + data[6] = 0; + data[7] = 0; + + return 0; +} + +/* 72 == 360 / 5 -> 1 report every 5 degrees */ +int resolution = 72; +int physical = 5; + +struct haptic_syscall_args { + unsigned int hid; + int retval; +}; + +static __u8 haptic_data[8]; + +SEC("syscall") +int set_haptic(struct haptic_syscall_args *args) +{ + struct hid_bpf_ctx *ctx; + const size_t size = sizeof(haptic_data); + u16 *res; + int ret; + + if (size > sizeof(haptic_data)) + return -7; /* -E2BIG */ + + ctx = hid_bpf_allocate_context(args->hid); + if (!ctx) + return -1; /* EPERM check */ + + haptic_data[0] = 1; /* report ID */ + + ret = hid_bpf_hw_request(ctx, haptic_data, size, HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + + bpf_printk("probed/remove event ret value: %d", ret); + bpf_printk("buf: %02x %02x %02x", + haptic_data[0], + haptic_data[1], + haptic_data[2]); + bpf_printk(" %02x %02x %02x", + haptic_data[3], + haptic_data[4], + haptic_data[5]); + bpf_printk(" %02x %02x", + haptic_data[6], + haptic_data[7]); + + /* whenever resolution multiplier is not 3600, we have the fixed report descriptor */ + res = (u16 *)&haptic_data[1]; + if (*res != 3600) { +// haptic_data[1] = 72; /* resolution multiplier */ +// haptic_data[2] = 0; /* resolution multiplier */ +// haptic_data[3] = 0; /* Repeat Count */ + haptic_data[4] = 3; /* haptic Auto Trigger */ +// haptic_data[5] = 5; /* Waveform Cutoff Time */ +// haptic_data[6] = 80; /* Retrigger Period */ +// haptic_data[7] = 0; /* Retrigger Period */ + } else { + haptic_data[4] = 0; + } + + ret = hid_bpf_hw_request(ctx, haptic_data, size, HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + + bpf_printk("set haptic ret value: %d -> %d", ret, haptic_data[4]); + + args->retval = ret; + + hid_bpf_release_context(ctx); + + return 0; +} + +/* Convert REL_DIAL into REL_WHEEL */ +SEC("fmod_ret/hid_bpf_rdesc_fixup") +int BPF_PROG(hid_rdesc_fixup, struct hid_bpf_ctx *hctx) +{ + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */); + __u16 *res, *phys; + + if (!data) + return 0; /* EPERM check */ + + /* Convert TOUCH into a button */ + data[31] = HID_UP_BUTTON; + data[33] = 2; + + /* Convert REL_DIAL into REL_WHEEL */ + data[45] = HID_GD_WHEEL; + + /* Change Resolution Multiplier */ + phys = (__u16 *)&data[61]; + *phys = physical; + res = (__u16 *)&data[66]; + *res = resolution; + + /* Convert X,Y from Abs to Rel */ + data[88] = 0x06; + data[98] = 0x06; + + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = 1; diff --git a/samples/hid/hid_surface_dial.c b/samples/hid/hid_surface_dial.c new file mode 100644 index 000000000000..fda6964e3adc --- /dev/null +++ b/samples/hid/hid_surface_dial.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2022 Benjamin Tissoires + * + * This program will morph the Microsoft Surface Dial into a mouse, + * and depending on the chosen resolution enable or not the haptic feedback: + * - a resolution (-r) of 3600 will report 3600 "ticks" in one full rotation + * wihout haptic feedback + * - any other resolution will report N "ticks" in a full rotation with haptic + * feedback + * + * A good default for low resolution haptic scrolling is 72 (1 "tick" every 5 + * degrees), and set to 3600 for smooth scrolling. + */ + +#include <assert.h> +#include <errno.h> +#include <fcntl.h> +#include <libgen.h> +#include <signal.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/resource.h> +#include <unistd.h> + +#include <linux/bpf.h> +#include <linux/errno.h> + +#include <bpf/bpf.h> +#include <bpf/libbpf.h> + +#include "hid_surface_dial.skel.h" + +static bool running = true; + +struct attach_prog_args { + int prog_fd; + unsigned int hid; + int retval; +}; + +struct haptic_syscall_args { + unsigned int hid; + int retval; +}; + +static void int_exit(int sig) +{ + running = false; + exit(0); +} + +static void usage(const char *prog) +{ + fprintf(stderr, + "%s: %s [OPTIONS] /sys/bus/hid/devices/0BUS:0VID:0PID:00ID\n\n" + " OPTIONS:\n" + " -r N\t set the given resolution to the device (number of ticks per 360°)\n\n", + __func__, prog); + fprintf(stderr, + "This program will morph the Microsoft Surface Dial into a mouse,\n" + "and depending on the chosen resolution enable or not the haptic feedback:\n" + "- a resolution (-r) of 3600 will report 3600 'ticks' in one full rotation\n" + " wihout haptic feedback\n" + "- any other resolution will report N 'ticks' in a full rotation with haptic\n" + " feedback\n" + "\n" + "A good default for low resolution haptic scrolling is 72 (1 'tick' every 5\n" + "degrees), and set to 3600 for smooth scrolling.\n"); +} + +static int get_hid_id(const char *path) +{ + const char *str_id, *dir; + char uevent[1024]; + int fd; + + memset(uevent, 0, sizeof(uevent)); + snprintf(uevent, sizeof(uevent) - 1, "%s/uevent", path); + + fd = open(uevent, O_RDONLY | O_NONBLOCK); + if (fd < 0) + return -ENOENT; + + close(fd); + + dir = basename((char *)path); + + str_id = dir + sizeof("0003:0001:0A37."); + return (int)strtol(str_id, NULL, 16); +} + +static int attach_prog(struct hid_surface_dial *skel, struct bpf_program *prog, int hid_id) +{ + struct attach_prog_args args = { + .hid = hid_id, + .retval = -1, + }; + int attach_fd, err; + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattr, + .ctx_in = &args, + .ctx_size_in = sizeof(args), + ); + + attach_fd = bpf_program__fd(skel->progs.attach_prog); + if (attach_fd < 0) { + fprintf(stderr, "can't locate attach prog: %m\n"); + return 1; + } + + args.prog_fd = bpf_program__fd(prog); + err = bpf_prog_test_run_opts(attach_fd, &tattr); + if (err) { + fprintf(stderr, "can't attach prog to hid device %d: %m (err: %d)\n", + hid_id, err); + return 1; + } + return 0; +} + +static int set_haptic(struct hid_surface_dial *skel, int hid_id) +{ + struct haptic_syscall_args args = { + .hid = hid_id, + .retval = -1, + }; + int haptic_fd, err; + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattr, + .ctx_in = &args, + .ctx_size_in = sizeof(args), + ); + + haptic_fd = bpf_program__fd(skel->progs.set_haptic); + if (haptic_fd < 0) { + fprintf(stderr, "can't locate haptic prog: %m\n"); + return 1; + } + + err = bpf_prog_test_run_opts(haptic_fd, &tattr); + if (err) { + fprintf(stderr, "can't set haptic configuration to hid device %d: %m (err: %d)\n", + hid_id, err); + return 1; + } + return 0; +} + +int main(int argc, char **argv) +{ + struct hid_surface_dial *skel; + struct bpf_program *prog; + const char *optstr = "r:"; + const char *sysfs_path; + int opt, hid_id, resolution = 72; + + while ((opt = getopt(argc, argv, optstr)) != -1) { + switch (opt) { + case 'r': + { + char *endp = NULL; + long l = -1; + + if (optarg) { + l = strtol(optarg, &endp, 10); + if (endp && *endp) + l = -1; + } + + if (l < 0) { + fprintf(stderr, + "invalid r option %s - expecting a number\n", + optarg ? optarg : ""); + exit(EXIT_FAILURE); + }; + + resolution = (int) l; + break; + } + default: + usage(basename(argv[0])); + return 1; + } + } + + if (optind == argc) { + usage(basename(argv[0])); + return 1; + } + + sysfs_path = argv[optind]; + if (!sysfs_path) { + perror("sysfs"); + return 1; + } + + skel = hid_surface_dial__open_and_load(); + if (!skel) { + fprintf(stderr, "%s %s:%d", __func__, __FILE__, __LINE__); + return -1; + } + + hid_id = get_hid_id(sysfs_path); + if (hid_id < 0) { + fprintf(stderr, "can not open HID device: %m\n"); + return 1; + } + + skel->data->resolution = resolution; + skel->data->physical = (int)(resolution / 72); + + bpf_object__for_each_program(prog, *skel->skeleton->obj) { + /* ignore syscalls */ + if (bpf_program__get_type(prog) != BPF_PROG_TYPE_TRACING) + continue; + + attach_prog(skel, prog, hid_id); + } + + signal(SIGINT, int_exit); + signal(SIGTERM, int_exit); + + set_haptic(skel, hid_id); + + while (running) + sleep(1); + + hid_surface_dial__destroy(skel); + + return 0; +}