amd-pstate driver utilizes the functions and data structures provided by the ITMT architecture to enable the scheduler to favor scheduling on cores which can be get a higher frequency with lower voltage. We call it amd-pstate preferrred core.
Here sched_set_itmt_core_prio() is called to set priorities and sched_set_itmt_support() is called to enable ITMT feature. amd-pstate driver uses the highest performance value to indicate the priority of CPU. The higher value has a higher priority.
The initial core rankings are set up by amd-pstate when the system boots.
Add device attribute for hardware preferred core. It will check if the processor and power firmware support preferred core feature.
Add device attribute for preferred core. Only when hardware supports preferred core and user set `enabled` in early parameter, it can be set to enabled.
Add one new early parameter `disable` to allow user to disable the preferred core.
Reviewed-by: Mario Limonciello mario.limonciello@amd.com Co-developed-by: Perry Yuan Perry.Yuan@amd.com Signed-off-by: Perry Yuan Perry.Yuan@amd.com Signed-off-by: Meng Li li.meng@amd.com --- drivers/cpufreq/amd-pstate.c | 163 +++++++++++++++++++++++++++++++---- 1 file changed, 147 insertions(+), 16 deletions(-)
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 9a1e194d5cf8..050e23594057 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -37,6 +37,7 @@ #include <linux/uaccess.h> #include <linux/static_call.h> #include <linux/amd-pstate.h> +#include <linux/topology.h>
#include <acpi/processor.h> #include <acpi/cppc_acpi.h> @@ -49,6 +50,8 @@
#define AMD_PSTATE_TRANSITION_LATENCY 20000 #define AMD_PSTATE_TRANSITION_DELAY 1000 +#define AMD_PSTATE_PREFCORE_THRESHOLD 166 +#define AMD_PSTATE_MAX_CPPC_PERF 255
/* * TODO: We need more time to fine tune processors with shared memory solution @@ -65,6 +68,12 @@ static struct cpufreq_driver amd_pstate_epp_driver; static int cppc_state = AMD_PSTATE_UNDEFINED; static bool cppc_enabled;
+/*HW preferred Core featue is supported*/ +static bool hw_prefcore = true; + +/*Preferred Core featue is supported*/ +static bool prefcore = true; + /* * AMD Energy Preference Performance (EPP) * The EPP is used in the CCLK DPM controller to drive @@ -290,23 +299,21 @@ static inline int amd_pstate_enable(bool enable) static int pstate_init_perf(struct amd_cpudata *cpudata) { u64 cap1; - u32 highest_perf;
int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1, &cap1); if (ret) return ret;
- /* - * TODO: Introduce AMD specific power feature. - * - * CPPC entry doesn't indicate the highest performance in some ASICs. + /* For platforms that do not support the preferred core feature, the + * highest_pef may be configured with 166 or 255, to avoid max frequency + * calculated wrongly. we take the AMD_CPPC_HIGHEST_PERF(cap1) value as + * the default max perf. */ - highest_perf = amd_get_highest_perf(); - if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1)) - highest_perf = AMD_CPPC_HIGHEST_PERF(cap1); - - WRITE_ONCE(cpudata->highest_perf, highest_perf); + if (hw_prefcore) + WRITE_ONCE(cpudata->highest_perf, AMD_PSTATE_PREFCORE_THRESHOLD); + else + WRITE_ONCE(cpudata->highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1)); WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1)); @@ -318,17 +325,15 @@ static int pstate_init_perf(struct amd_cpudata *cpudata) static int cppc_init_perf(struct amd_cpudata *cpudata) { struct cppc_perf_caps cppc_perf; - u32 highest_perf;
int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); if (ret) return ret;
- highest_perf = amd_get_highest_perf(); - if (highest_perf > cppc_perf.highest_perf) - highest_perf = cppc_perf.highest_perf; - - WRITE_ONCE(cpudata->highest_perf, highest_perf); + if (hw_prefcore) + WRITE_ONCE(cpudata->highest_perf, AMD_PSTATE_PREFCORE_THRESHOLD); + else + WRITE_ONCE(cpudata->highest_perf, cppc_perf.highest_perf);
WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf); WRITE_ONCE(cpudata->lowest_nonlinear_perf, @@ -676,6 +681,90 @@ static void amd_perf_ctl_reset(unsigned int cpu) wrmsrl_on_cpu(cpu, MSR_AMD_PERF_CTL, 0); }
+/* + * Set amd-pstate preferred core enable can't be done directly from cpufreq callbacks + * due to locking, so queue the work for later. + */ +static void amd_pstste_sched_prefcore_workfn(struct work_struct *work) +{ + sched_set_itmt_support(); +} +static DECLARE_WORK(sched_prefcore_work, amd_pstste_sched_prefcore_workfn); + +/* + * Get the highest performance register value. + * @cpu: CPU from which to get highest performance. + * @highest_perf: Return address. + * + * Return: 0 for success, -EIO otherwise. + */ +static int amd_pstate_get_highest_perf(int cpu, u32 *highest_perf) +{ + int ret; + u64 cppc_highest_perf; + + if (boot_cpu_has(X86_FEATURE_CPPC)) { + u64 cap1; + + ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1); + if (ret) + return ret; + WRITE_ONCE(*highest_perf, AMD_CPPC_HIGHEST_PERF(cap1)); + } else { + ret = cppc_get_highest_perf(cpu, &cppc_highest_perf); + *highest_perf = (u32)(cppc_highest_perf & 0xFFFF); + } + + return (ret); +} + +static void amd_pstate_init_prefcore(unsigned int cpu) +{ + int ret; + u32 highest_perf; + static u32 max_highest_perf = 0, min_highest_perf = U32_MAX; + + if (!prefcore) + return; + + ret = amd_pstate_get_highest_perf(cpu, &highest_perf); + if (ret) + return; + + /* + * The priorities can be set regardless of whether or not + * sched_set_itmt_support(true) has been called and it is valid to + * update them at any time after it has been called. + */ + sched_set_itmt_core_prio(highest_perf, cpu); + + /* check if CPPC preferred core feature is enabled*/ + if (highest_perf == AMD_PSTATE_MAX_CPPC_PERF) { + pr_debug("AMD CPPC preferred core is unsupported!\n"); + hw_prefcore = false; + prefcore = false; + return; + } + + if (max_highest_perf <= min_highest_perf) { + if (highest_perf > max_highest_perf) + max_highest_perf = highest_perf; + + if (highest_perf < min_highest_perf) + min_highest_perf = highest_perf; + + if (max_highest_perf > min_highest_perf) { + /* + * This code can be run during CPU online under the + * CPU hotplug locks, so sched_set_itmt_support() + * cannot be called from here. Queue up a work item + * to invoke it. + */ + schedule_work(&sched_prefcore_work); + } + } +} + static int amd_pstate_cpu_init(struct cpufreq_policy *policy) { int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret; @@ -697,6 +786,8 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
cpudata->cpu = policy->cpu;
+ amd_pstate_init_prefcore(policy->cpu); + ret = amd_pstate_init_perf(cpudata); if (ret) goto free_cpudata1; @@ -763,6 +854,22 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy) return ret; }
+static int amd_pstate_cpu_online(struct cpufreq_policy *policy) +{ + struct amd_cpudata *cpudata = policy->driver_data; + + pr_debug("CPU %d going online\n", cpudata->cpu); + + amd_pstate_init_prefcore(cpudata->cpu); + + return 0; +} + +static int amd_pstate_cpu_offline(struct cpufreq_policy *policy) +{ + return 0; +} + static int amd_pstate_cpu_exit(struct cpufreq_policy *policy) { struct amd_cpudata *cpudata = policy->driver_data; @@ -1037,6 +1144,12 @@ static ssize_t status_store(struct device *a, struct device_attribute *b, return ret < 0 ? ret : count; }
+static ssize_t prefcore_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%s\n", prefcore ? "enabled" : "disabled"); +} + cpufreq_freq_attr_ro(amd_pstate_max_freq); cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq);
@@ -1044,6 +1157,7 @@ cpufreq_freq_attr_ro(amd_pstate_highest_perf); cpufreq_freq_attr_rw(energy_performance_preference); cpufreq_freq_attr_ro(energy_performance_available_preferences); static DEVICE_ATTR_RW(status); +static DEVICE_ATTR_RO(prefcore);
static struct freq_attr *amd_pstate_attr[] = { &amd_pstate_max_freq, @@ -1063,6 +1177,7 @@ static struct freq_attr *amd_pstate_epp_attr[] = {
static struct attribute *pstate_global_attributes[] = { &dev_attr_status.attr, + &dev_attr_prefcore.attr, NULL };
@@ -1114,6 +1229,8 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy) cpudata->cpu = policy->cpu; cpudata->epp_policy = 0;
+ amd_pstate_init_prefcore(policy->cpu); + ret = amd_pstate_init_perf(cpudata); if (ret) goto free_cpudata1; @@ -1285,6 +1402,8 @@ static int amd_pstate_epp_cpu_online(struct cpufreq_policy *policy)
pr_debug("AMD CPU Core %d going online\n", cpudata->cpu);
+ amd_pstate_init_prefcore(cpudata->cpu); + if (cppc_state == AMD_PSTATE_ACTIVE) { amd_pstate_epp_reenable(cpudata); cpudata->suspended = false; @@ -1389,6 +1508,8 @@ static struct cpufreq_driver amd_pstate_driver = { .fast_switch = amd_pstate_fast_switch, .init = amd_pstate_cpu_init, .exit = amd_pstate_cpu_exit, + .offline = amd_pstate_cpu_offline, + .online = amd_pstate_cpu_online, .suspend = amd_pstate_cpu_suspend, .resume = amd_pstate_cpu_resume, .set_boost = amd_pstate_set_boost, @@ -1527,7 +1648,17 @@ static int __init amd_pstate_param(char *str)
return amd_pstate_set_driver(mode_idx); } + +static int __init amd_prefcore_param(char *str) +{ + if (!strcmp(str, "disable")) + prefcore = false; + + return 0; +} + early_param("amd_pstate", amd_pstate_param); +early_param("amd_prefcore", amd_prefcore_param);
MODULE_AUTHOR("Huang Rui ray.huang@amd.com"); MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver");