Implemented the functionality to run all KUnit tests through kunit_tool by specifying an --alltests flag, which builds UML with allyesconfig enabled, and consequently runs every KUnit test. A new function was added to kunit_kernel: make_allyesconfig. Firstly, if --alltests is specified, kunit.py triggers build_um_kernel which call make_allyesconfig. This function calls the make command, disables the broken configs that would otherwise prevent UML from building, then starts the kernel with all possible configurations enabled. All stdout and stderr is sent to test.log and read from there then fed through kunit_parser to parse the tests to the user. Also added a signal_handler in case kunit is interrupted while running. Tested: Run under different conditions such as testing with --raw_output, testing program interrupt then immediately running kunit again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim heidifahim@google.com --- Changelog: v3: - Minor change since v2 in message for program interruption. Changed "Cleaning config." to "Cleaning console."
.../kunit/configs/broken_on_uml.config | 41 ++++++++++++ tools/testing/kunit/kunit.py | 30 +++++---- tools/testing/kunit/kunit_kernel.py | 62 ++++++++++++++----- tools/testing/kunit/kunit_parser.py | 1 + tools/testing/kunit/kunit_tool_test.py | 17 ++--- 5 files changed, 115 insertions(+), 36 deletions(-) create mode 100644 tools/testing/kunit/configs/broken_on_uml.config
diff --git a/tools/testing/kunit/configs/broken_on_uml.config b/tools/testing/kunit/configs/broken_on_uml.config new file mode 100644 index 000000000000..239b9f03da2c --- /dev/null +++ b/tools/testing/kunit/configs/broken_on_uml.config @@ -0,0 +1,41 @@ +# These are currently broken on UML and prevent allyesconfig from building +# CONFIG_STATIC_LINK is not set +# CONFIG_UML_NET_VECTOR is not set +# CONFIG_UML_NET_VDE is not set +# CONFIG_UML_NET_PCAP is not set +# CONFIG_NET_PTP_CLASSIFY is not set +# CONFIG_IP_VS is not set +# CONFIG_BRIDGE_EBT_BROUTE is not set +# CONFIG_BRIDGE_EBT_T_FILTER is not set +# CONFIG_BRIDGE_EBT_T_NAT is not set +# CONFIG_MTD_NAND_CADENCE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_NET_VENDOR_XILINX is not set +# CONFIG_NULL_TTY is not set +# CONFIG_PTP_1588_CLOCK is not set +# CONFIG_PINCTRL_EQUILIBRIUM is not set +# CONFIG_DMABUF_SELFTESTS is not set +# CONFIG_COMEDI is not set +# CONFIG_XIL_AXIS_FIFO is not set +# CONFIG_EXFAT_FS is not set +# CONFIG_STM_DUMMY is not set +# CONFIG_FSI_MASTER_ASPEED is not set +# CONFIG_JFS_FS is not set +# CONFIG_UBIFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set +# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set +# CONFIG_KCOV is not set +# CONFIG_LKDTM is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_MEMINIT is not set +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +# CONFIG_DEBUG_INFO_BTF is not set +# CONFIG_PTP_1588_CLOCK_INES is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_RESET_BRCMSTB_RESCAL is not set +# CONFIG_RESET_INTEL_GW is not set diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 180ad1e1b04f..650bb4cfc544 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -22,7 +22,9 @@ import kunit_parser
KunitResult = namedtuple('KunitResult', ['status','result'])
-KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', 'build_dir', 'defconfig']) +KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', + 'build_dir', 'defconfig', + 'alltests'])
KernelDirectoryPath = sys.argv[0].split('tools/testing/kunit/')[0]
@@ -55,24 +57,23 @@ def run_tests(linux: kunit_kernel.LinuxSourceTree, kunit_parser.print_with_timestamp('Building KUnit Kernel ...')
build_start = time.time() - success = linux.build_um_kernel(request.jobs, request.build_dir) + success = linux.build_um_kernel(request.alltests, + request.jobs, + request.build_dir) build_end = time.time() if not success: return KunitResult(KunitStatus.BUILD_FAILURE, 'could not build kernel')
kunit_parser.print_with_timestamp('Starting KUnit Kernel ...') test_start = time.time() - - test_result = kunit_parser.TestResult(kunit_parser.TestStatus.SUCCESS, - [], - 'Tests not Parsed.') + kunit_output = linux.run_kernel( + timeout=None if request.alltests else request.timeout, + build_dir=request.build_dir) if request.raw_output: - kunit_parser.raw_output( - linux.run_kernel(timeout=request.timeout, - build_dir=request.build_dir)) + raw_output = kunit_parser.raw_output(kunit_output) + isolated = list(kunit_parser.isolate_kunit_output(raw_output)) + test_result = kunit_parser.parse_test_result(isolated) else: - kunit_output = linux.run_kernel(timeout=request.timeout, - build_dir=request.build_dir) test_result = kunit_parser.parse_run_tests(kunit_output) test_end = time.time()
@@ -120,6 +121,10 @@ def main(argv, linux=None): help='Uses a default .kunitconfig.', action='store_true')
+ run_parser.add_argument('--alltests', + help='Run all KUnit tests through allyesconfig', + action='store_true') + cli_args = parser.parse_args(argv)
if cli_args.subcommand == 'run': @@ -143,7 +148,8 @@ def main(argv, linux=None): cli_args.timeout, cli_args.jobs, cli_args.build_dir, - cli_args.defconfig) + cli_args.defconfig, + cli_args.alltests) result = run_tests(linux, request) if result.status != KunitStatus.SUCCESS: sys.exit(1) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index d99ae75ef72f..415d8f3c4fe4 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -10,11 +10,16 @@ import logging import subprocess import os +import signal + +from contextlib import ExitStack
import kunit_config +import kunit_parser
KCONFIG_PATH = '.config' kunitconfig_path = '.kunitconfig' +BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config'
class ConfigError(Exception): """Represents an error trying to configure the Linux kernel.""" @@ -40,12 +45,29 @@ class LinuxSourceTreeOperations(object): if build_dir: command += ['O=' + build_dir] try: - subprocess.check_output(command) + subprocess.check_output(command, stderr=subprocess.PIPE) except OSError as e: raise ConfigError('Could not call make command: ' + e) except subprocess.CalledProcessError as e: raise ConfigError(e.output)
+ def make_allyesconfig(self): + kunit_parser.print_with_timestamp( + 'Enabling all CONFIGs for UML...') + process = subprocess.Popen( + ['make', 'ARCH=um', 'allyesconfig'], + stdout=subprocess.DEVNULL, + stderr=subprocess.STDOUT) + process.wait() + kunit_parser.print_with_timestamp( + 'Disabling broken configs to run KUnit tests...') + with ExitStack() as es: + config = open(KCONFIG_PATH, 'a') + disable = open(BROKEN_ALLCONFIG_PATH, 'r').read() + config.write(disable) + kunit_parser.print_with_timestamp( + 'Starting Kernel with all configs takes a few minutes...') + def make(self, jobs, build_dir): command = ['make', 'ARCH=um', '--jobs=' + str(jobs)] if build_dir: @@ -57,18 +79,16 @@ class LinuxSourceTreeOperations(object): except subprocess.CalledProcessError as e: raise BuildError(e.output)
- def linux_bin(self, params, timeout, build_dir): + def linux_bin(self, params, timeout, build_dir, outfile): """Runs the Linux UML binary. Must be named 'linux'.""" linux_bin = './linux' if build_dir: linux_bin = os.path.join(build_dir, 'linux') - process = subprocess.Popen( - [linux_bin] + params, - stdin=subprocess.PIPE, - stdout=subprocess.PIPE, - stderr=subprocess.PIPE) - process.wait(timeout=timeout) - return process + with open(outfile, 'w') as output: + process = subprocess.Popen([linux_bin] + params, + stdout=output, + stderr=subprocess.STDOUT) + process.wait(timeout)
def get_kconfig_path(build_dir): @@ -84,6 +104,7 @@ class LinuxSourceTree(object): self._kconfig = kunit_config.Kconfig() self._kconfig.read_from_file(kunitconfig_path) self._ops = LinuxSourceTreeOperations() + signal.signal(signal.SIGINT, self.signal_handler)
def clean(self): try: @@ -135,7 +156,9 @@ class LinuxSourceTree(object): print('Generating .config ...') return self.build_config(build_dir)
- def build_um_kernel(self, jobs, build_dir): + def build_um_kernel(self, alltests, jobs, build_dir): + if alltests: + self._ops.make_allyesconfig() try: self._ops.make_olddefconfig(build_dir) self._ops.make(jobs, build_dir) @@ -144,10 +167,15 @@ class LinuxSourceTree(object): return False return self.validate_config(build_dir)
- def run_kernel(self, args=[], timeout=None, build_dir=''): - args.extend(['mem=256M']) - process = self._ops.linux_bin(args, timeout, build_dir) - with open(os.path.join(build_dir, 'test.log'), 'w') as f: - for line in process.stdout: - f.write(line.rstrip().decode('ascii') + '\n') - yield line.rstrip().decode('ascii') + def run_kernel(self, args=[], build_dir='', timeout=None): + args.extend(['mem=1G']) + outfile = 'test.log' + self._ops.linux_bin(args, timeout, build_dir, outfile) + subprocess.call(['stty', 'sane']) + with open(outfile, 'r') as file: + for line in file: + yield line + + def signal_handler(self, sig, frame): + logging.error('Build interruption occurred. Cleaning console.') + subprocess.call(['stty', 'sane']) diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index adf86747b07f..02815062d5a6 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -65,6 +65,7 @@ def isolate_kunit_output(kernel_output): def raw_output(kernel_output): for line in kernel_output: print(line) + yield line
DIVIDER = '=' * 60
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 0efae697f396..ce47e87b633a 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -243,7 +243,8 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['run'], self.linux_source_mock) assert self.linux_source_mock.build_reconfig.call_count == 1 assert self.linux_source_mock.run_kernel.call_count == 1 - self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=300) + self.linux_source_mock.run_kernel.assert_called_once_with( + build_dir='', timeout=300) self.print_mock.assert_any_call(StrContains('Testing complete.'))
def test_run_passes_args_fail(self): @@ -258,25 +259,27 @@ class KUnitMainTest(unittest.TestCase):
def test_run_raw_output(self): self.linux_source_mock.run_kernel = mock.Mock(return_value=[]) - kunit.main(['run', '--raw_output'], self.linux_source_mock) + with self.assertRaises(SystemExit) as e: + kunit.main(['run', '--raw_output'], self.linux_source_mock) + assert type(e.exception) == SystemExit + assert e.exception.code == 1 assert self.linux_source_mock.build_reconfig.call_count == 1 assert self.linux_source_mock.run_kernel.call_count == 1 - for kall in self.print_mock.call_args_list: - assert kall != mock.call(StrContains('Testing complete.')) - assert kall != mock.call(StrContains(' 0 tests run'))
def test_run_timeout(self): timeout = 3453 kunit.main(['run', '--timeout', str(timeout)], self.linux_source_mock) assert self.linux_source_mock.build_reconfig.call_count == 1 - self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=timeout) + self.linux_source_mock.run_kernel.assert_called_once_with( + build_dir='', timeout=timeout) self.print_mock.assert_any_call(StrContains('Testing complete.'))
def test_run_builddir(self): build_dir = '.kunit' kunit.main(['run', '--build_dir', build_dir], self.linux_source_mock) assert self.linux_source_mock.build_reconfig.call_count == 1 - self.linux_source_mock.run_kernel.assert_called_once_with(build_dir=build_dir, timeout=300) + self.linux_source_mock.run_kernel.assert_called_once_with( + build_dir=build_dir, timeout=300) self.print_mock.assert_any_call(StrContains('Testing complete.'))
if __name__ == '__main__':