Adding documentation on landing pad aka indirect branch tracking on riscv and kernel interfaces exposed so that user tasks can enable it.
Signed-off-by: Deepak Gupta debug@rivosinc.com --- Documentation/arch/riscv/index.rst | 1 + Documentation/arch/riscv/zicfilp.rst | 115 +++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+)
diff --git a/Documentation/arch/riscv/index.rst b/Documentation/arch/riscv/index.rst index eecf347ce849..be7237b69682 100644 --- a/Documentation/arch/riscv/index.rst +++ b/Documentation/arch/riscv/index.rst @@ -14,6 +14,7 @@ RISC-V architecture uabi vector cmodx + zicfilp
features
diff --git a/Documentation/arch/riscv/zicfilp.rst b/Documentation/arch/riscv/zicfilp.rst new file mode 100644 index 000000000000..a188d78fcde6 --- /dev/null +++ b/Documentation/arch/riscv/zicfilp.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0 + +:Author: Deepak Gupta debug@rivosinc.com +:Date: 12 January 2024 + +==================================================== +Tracking indirect control transfers on RISC-V Linux +==================================================== + +This document briefly describes the interface provided to userspace by Linux +to enable indirect branch tracking for user mode applications on RISV-V + +1. Feature Overview +-------------------- + +Memory corruption issues usually result in to crashes, however when in hands of +an adversary and if used creatively can result into variety security issues. + +One of those security issues can be code re-use attacks on program where adversary +can use corrupt function pointers and chain them together to perform jump oriented +programming (JOP) or call oriented programming (COP) and thus compromising control +flow integrity (CFI) of the program. + +Function pointers live in read-write memory and thus are susceptible to corruption +and allows an adversary to reach any program counter (PC) in address space. On +RISC-V zicfilp extension enforces a restriction on such indirect control +transfers: + +- indirect control transfers must land on a landing pad instruction ``lpad``. + There are two exception to this rule: + + - rs1 = x1 or rs1 = x5, i.e. a return from a function and returns are + protected using shadow stack (see zicfiss.rst) + + - rs1 = x7. On RISC-V compiler usually does below to reach function + which is beyond the offset possible J-type instruction:: + + auipc x7, <imm> + jalr (x7) + + Such form of indirect control transfer are still immutable and don't rely + on memory and thus rs1=x7 is exempted from tracking and considered software + guarded jumps. + +``lpad`` instruction is pseudo of ``auipc rd, <imm_20bit>`` with ``rd=x0`` and +is a HINT nop. ``lpad`` instruction must be aligned on 4 byte boundary and +compares 20 bit immediate withx7. If ``imm_20bit`` == 0, CPU don't perform any +comparision with ``x7``. If ``imm_20bit`` != 0, then ``imm_20bit`` must match +``x7`` else CPU will raise ``software check exception`` (``cause=18``) with +``*tval = 2``. + +Compiler can generate a hash over function signatures and setup them (truncated +to 20bit) in x7 at callsites and function prologues can have ``lpad`` with same +function hash. This further reduces number of program counters a call site can +reach. + +2. ELF and psABI +----------------- + +Toolchain sets up :c:macro:`GNU_PROPERTY_RISCV_FEATURE_1_FCFI` for property +:c:macro:`GNU_PROPERTY_RISCV_FEATURE_1_AND` in notes section of the object file. + +3. Linux enabling +------------------ + +User space programs can have multiple shared objects loaded in its address space +and it's a difficult task to make sure all the dependencies have been compiled +with support of indirect branch. Thus it's left to dynamic loader to enable +indirect branch tracking for the program. + +4. prctl() enabling +-------------------- + +:c:macro:`PR_SET_INDIR_BR_LP_STATUS` / :c:macro:`PR_GET_INDIR_BR_LP_STATUS` / +:c:macro:`PR_LOCK_INDIR_BR_LP_STATUS` are three prctls added to manage indirect +branch tracking. prctls are arch agnostic and returns -EINVAL on other arches. + +* prctl(PR_SET_INDIR_BR_LP_STATUS, unsigned long arg) + +If arg1 is :c:macro:`PR_INDIR_BR_LP_ENABLE` and if CPU supports ``zicfilp`` +then kernel will enabled indirect branch tracking for the task. Dynamic loader +can issue this :c:macro:`prctl` once it has determined that all the objects +loaded in address space support indirect branch tracking. Additionally if there +is a `dlopen` to an object which wasn't compiled with ``zicfilp``, dynamic +loader can issue this prctl with arg1 set to 0 (i.e. +:c:macro:`PR_INDIR_BR_LP_ENABLE` being clear) + +* prctl(PR_GET_INDIR_BR_LP_STATUS, unsigned long arg) + +Returns current status of indirect branch tracking. If enabled it'll return +:c:macro:`PR_INDIR_BR_LP_ENABLE` + +* prctl(PR_LOCK_INDIR_BR_LP_STATUS, unsigned long arg) + +Locks current status of indirect branch tracking on the task. User space may +want to run with strict security posture and wouldn't want loading of objects +without ``zicfilp`` support in it and thus would want to disallow disabling of +indirect branch tracking. In that case user space can use this prctl to lock +current settings. + +5. violations related to indirect branch tracking +-------------------------------------------------- + +Pertaining to indirect branch tracking, CPU raises software check exception in +following conditions: + +- missing ``lpad`` after indirect call / jmp +- ``lpad`` not on 4 byte boundary +- ``imm_20bit`` embedded in ``lpad`` instruction doesn't match with ``x7`` + +In all 3 cases, ``*tval = 2`` is captured and software check exception is +raised (``cause=18``) + +Linux kernel will treat this as :c:macro:`SIGSEV`` with code = +:c:macro:`SEGV_CPERR` and follow normal course of signal delivery.