test_lwt_ip_encap.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by test_lwt_ip_encap.sh. It uses the same network topology and the same BPF programs located in progs/test_lwt_ip_encap.c. Rework the GSO part to avoid using nc and dd.
Remove test_lwt_ip_encap.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) bastien.curutchet@bootlin.com --- tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/lwt_ip_encap.c | 540 +++++++++++++++++++++ tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 476 ------------------ 3 files changed, 541 insertions(+), 478 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index e6a02d5b87d123cef7e6b41bfbc96d34083f38e1..df4814b5200a5a0e732b19ab3a5975957fb7cbc9 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -95,7 +95,7 @@ TEST_GEN_PROGS += test_progs-cpuv4 TEST_INST_SUBDIRS += cpuv4 endif
-TEST_GEN_FILES = test_lwt_ip_encap.bpf.o test_tc_edt.bpf.o +TEST_GEN_FILES = test_tc_edt.bpf.o TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c)
# Order correspond to 'make run_tests' order @@ -104,7 +104,6 @@ TEST_PROGS := test_kmod.sh \ test_lirc_mode2.sh \ test_xdp_vlan_mode_generic.sh \ test_xdp_vlan_mode_native.sh \ - test_lwt_ip_encap.sh \ test_tc_tunnel.sh \ test_tc_edt.sh \ test_xdping.sh \ diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c new file mode 100644 index 0000000000000000000000000000000000000000..61fcded43b46cab7775237c6d85de07b5df7d87e --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <netinet/in.h> + +#include "network_helpers.h" +#include "test_progs.h" + +#define BPF_FILE "test_lwt_ip_encap.bpf.o" + +#define NETNS_NAME_SIZE 32 +#define NETNS_BASE "ns-lwt-ip-encap" + +#define IP4_ADDR_1 "172.16.1.100" +#define IP4_ADDR_2 "172.16.2.100" +#define IP4_ADDR_3 "172.16.3.100" +#define IP4_ADDR_4 "172.16.4.100" +#define IP4_ADDR_5 "172.16.5.100" +#define IP4_ADDR_6 "172.16.6.100" +#define IP4_ADDR_7 "172.16.7.100" +#define IP4_ADDR_8 "172.16.8.100" +#define IP4_ADDR_GRE "172.16.16.100" + +#define IP4_ADDR_SRC IP4_ADDR_1 +#define IP4_ADDR_DST IP4_ADDR_4 + +#define IP6_ADDR_1 "fb01::1" +#define IP6_ADDR_2 "fb02::1" +#define IP6_ADDR_3 "fb03::1" +#define IP6_ADDR_4 "fb04::1" +#define IP6_ADDR_5 "fb05::1" +#define IP6_ADDR_6 "fb06::1" +#define IP6_ADDR_7 "fb07::1" +#define IP6_ADDR_8 "fb08::1" +#define IP6_ADDR_GRE "fb10::1" + +#define IP6_ADDR_SRC IP6_ADDR_1 +#define IP6_ADDR_DST IP6_ADDR_4 + +/* Setup/topology: + * + * NS1 NS2 NS3 + * veth1 <---> veth2 veth3 <---> veth4 (the top route) + * veth5 <---> veth6 veth7 <---> veth8 (the bottom route) + * + * Each vethN gets IP[4|6]_ADDR_N address. + * + * IP*_ADDR_SRC = IP*_ADDR_1 + * IP*_ADDR_DST = IP*_ADDR_4 + * + * All tests test pings from IP*_ADDR__SRC to IP*_ADDR_DST. + * + * By default, routes are configured to allow packets to go + * IP*_ADDR_1 <=> IP*_ADDR_2 <=> IP*_ADDR_3 <=> IP*_ADDR_4 (the top route). + * + * A GRE device is installed in NS3 with IP*_ADDR_GRE, and + * NS1/NS2 are configured to route packets to IP*_ADDR_GRE via IP*_ADDR_8 + * (the bottom route). + * + * Tests: + * + * 1. Routes NS2->IP*_ADDR_DST are brought down, so the only way a ping + * from IP*_ADDR_SRC to IP*_ADDR_DST can work is via IP*_ADDR_GRE. + * + * 2a. In an egress test, a bpf LWT_XMIT program is installed on veth1 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth1:egress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2b. In an ingress test, a bpf LWT_IN program is installed on veth2 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST + * ping replies go DST->SRC directly + */ + +static int create_ns(char *name, size_t name_sz) +{ + if (!name) + goto fail; + + if (!ASSERT_OK(append_tid(name, name_sz), "append TID")) + goto fail; + + SYS(fail, "ip netns add %s", name); + + /* rp_filter gets confused by what these tests are doing, so disable it */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.all.rp_filter=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.default.rp_filter=0", name); + /* Disable IPv6 DAD because it sometimes takes too long and fails tests */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.accept_dad=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.default.accept_dad=0", name); + + return 0; +fail: + return -1; +} + +static int set_top_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth1", ns1, IP4_ADDR_1); + SYS(fail, "ip -n %s a add %s/24 dev veth2", ns2, IP4_ADDR_2); + SYS(fail, "ip -n %s a add %s/24 dev veth3", ns2, IP4_ADDR_3); + SYS(fail, "ip -n %s a add %s/24 dev veth4", ns3, IP4_ADDR_4); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth1", ns1, IP6_ADDR_1); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth2", ns2, IP6_ADDR_2); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth3", ns2, IP6_ADDR_3); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth4", ns3, IP6_ADDR_4); + + SYS(fail, "ip -n %s link set dev veth1 up", ns1); + SYS(fail, "ip -n %s link set dev veth2 up", ns2); + SYS(fail, "ip -n %s link set dev veth3 up", ns2); + SYS(fail, "ip -n %s link set dev veth4 up", ns3); + + return 0; +fail: + return 1; +} + +static int set_bottom_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth5", ns1, IP4_ADDR_5); + SYS(fail, "ip -n %s a add %s/24 dev veth6", ns2, IP4_ADDR_6); + SYS(fail, "ip -n %s a add %s/24 dev veth7", ns2, IP4_ADDR_7); + SYS(fail, "ip -n %s a add %s/24 dev veth8", ns3, IP4_ADDR_8); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth5", ns1, IP6_ADDR_5); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth6", ns2, IP6_ADDR_6); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth7", ns2, IP6_ADDR_7); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth8", ns3, IP6_ADDR_8); + + SYS(fail, "ip -n %s link set dev veth5 up", ns1); + SYS(fail, "ip -n %s link set dev veth6 up", ns2); + SYS(fail, "ip -n %s link set dev veth7 up", ns2); + SYS(fail, "ip -n %s link set dev veth8 up", ns3); + + return 0; +fail: + return 1; +} + +static int configure_vrf(const char *ns1, const char *ns2) +{ + if (!ns1 || !ns2) + goto fail; + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns1); + SYS(fail, "ip -n %s link set red up", ns1); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s link set veth1 vrf red", ns1); + SYS(fail, "ip -n %s link set veth5 vrf red", ns1); + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns2); + SYS(fail, "ip -n %s link set red up", ns2); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s link set veth2 vrf red", ns2); + SYS(fail, "ip -n %s link set veth3 vrf red", ns2); + SYS(fail, "ip -n %s link set veth6 vrf red", ns2); + SYS(fail, "ip -n %s link set veth7 vrf red", ns2); + + return 0; +fail: + return -1; +} + +static int configure_ns1(const char *ns1, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns1 || !vrf) + goto fail; + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth1 %s", IP4_ADDR_2, vrf); + SYS(fail, "ip route add default dev veth1 via %s %s", IP4_ADDR_2, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth1 %s", IP6_ADDR_2, vrf); + SYS(fail, "ip -6 route add default dev veth1 via %s %s", IP6_ADDR_2, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth5 %s", IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_7, IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_8, IP4_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 %s", IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_7, IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_8, IP6_ADDR_6, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns2(const char *ns2, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns2 || !vrf) + goto fail; + + nstoken = open_netns(ns2); + if (!ASSERT_OK_PTR(nstoken, "open ns2")) + goto fail; + + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.ip_forward=1", ns2); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.forwarding=1", ns2); + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth2 %s", IP4_ADDR_1, vrf); + SYS(fail, "ip route add %s/32 dev veth3 %s", IP4_ADDR_4, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth2 %s", IP6_ADDR_1, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth3 %s", IP6_ADDR_4, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth6 %s", IP4_ADDR_5, vrf); + SYS(fail, "ip route add %s/32 dev veth7 %s", IP4_ADDR_8, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth6 %s", IP6_ADDR_5, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth7 %s", IP6_ADDR_8, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns3(const char *ns3) +{ + struct nstoken *nstoken = NULL; + + if (!ns3) + goto fail; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth4", IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_1, IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_2, IP4_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4", IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_1, IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_2, IP6_ADDR_3); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth8", IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_5, IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_6, IP4_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8", IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_5, IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_6, IP6_ADDR_7); + + /* Configure IPv4 GRE device */ + SYS(fail, "ip tunnel add gre_dev mode gre remote %s local %s ttl 255", + IP4_ADDR_1, IP4_ADDR_GRE); + SYS(fail, "ip link set gre_dev up"); + SYS(fail, "ip a add %s dev gre_dev", IP4_ADDR_GRE); + + /* Configure IPv6 GRE device */ + SYS(fail, "ip tunnel add gre6_dev mode ip6gre remote %s local %s ttl 255", + IP6_ADDR_1, IP6_ADDR_GRE); + SYS(fail, "ip link set gre6_dev up"); + SYS(fail, "ip a add %s dev gre6_dev", IP6_ADDR_GRE); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int setup_network(char *ns1, char *ns2, char *ns3, const char *vrf) +{ + if (!ns1 || !ns2 || !ns3 || !vrf) + goto fail; + + SYS(fail, "ip -n %s link add veth1 type veth peer name veth2 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth3 type veth peer name veth4 netns %s", ns2, ns3); + SYS(fail, "ip -n %s link add veth5 type veth peer name veth6 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth7 type veth peer name veth8 netns %s", ns2, ns3); + + if (vrf[0]) { + if (!ASSERT_OK(configure_vrf(ns1, ns2), "configure vrf")) + goto fail; + } + if (!ASSERT_OK(set_top_addr(ns1, ns2, ns3), "set top addresses")) + goto fail; + + if (!ASSERT_OK(set_bottom_addr(ns1, ns2, ns3), "set bottom addresses")) + goto fail; + + if (!ASSERT_OK(configure_ns1(ns1, vrf), "configure ns1 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns2(ns2, vrf), "configure ns2 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns3(ns3), "configure ns3 routes")) + goto fail; + + /* Link bottom route to the GRE tunnels */ + SYS(fail, "ip -n %s route add %s/32 dev veth5 via %s %s", + ns1, IP4_ADDR_GRE, IP4_ADDR_6, vrf); + SYS(fail, "ip -n %s route add %s/32 dev veth7 via %s %s", + ns2, IP4_ADDR_GRE, IP4_ADDR_8, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth5 via %s %s", + ns1, IP6_ADDR_GRE, IP6_ADDR_6, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth7 via %s %s", + ns2, IP6_ADDR_GRE, IP6_ADDR_8, vrf); + + return 0; +fail: + return -1; +} + +int remove_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route del %s dev veth5 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route del %s dev veth7 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth5 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth7 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +int add_unreachable_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +#define GSO_SIZE 5000 +#define GSO_TCP_PORT 9000 +/* This tests the fix from commit ea0371f78799 ("net: fix GSO in bpf_lwt_push_ip_encap") */ +static int test_gso_fix(const char *ns1, const char *ns3, int family) +{ + const char *ip_addr = family == AF_INET ? IP4_ADDR_DST : IP6_ADDR_DST; + char gso_packet[GSO_SIZE] = {}; + struct nstoken *nstoken = NULL; + int sfd, cfd, afd; + ssize_t bytes; + int ret = -1; + + if (!ns1 || !ns3) + return ret; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + return ret; + + sfd = start_server_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(sfd, "start server")) + goto close_netns; + + close_netns(nstoken); + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto close_server; + + cfd = connect_to_addr_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(cfd, "connect to server")) + goto close_server; + + close_netns(nstoken); + nstoken = NULL; + + afd = accept(sfd, NULL, NULL); + if (!ASSERT_OK_FD(afd, "accept")) + goto close_client; + + /* Send a packet larger than MTU */ + bytes = send(cfd, gso_packet, GSO_SIZE, 0); + if (!ASSERT_EQ(bytes, GSO_SIZE, "send packet")) + goto close_accept; + + /* Verify we received all expected bytes */ + bytes = read(afd, gso_packet, GSO_SIZE); + if (!ASSERT_EQ(bytes, GSO_SIZE, "receive packet")) + goto close_accept; + + ret = 0; + +close_accept: + close(afd); +close_client: + close(cfd); +close_server: + close(sfd); +close_netns: + close_netns(nstoken); + + return ret; +} + +static int check_ping_ok(const char *ns1) +{ + SYS(fail, "ip netns exec %s ping -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP4_ADDR_DST); + SYS(fail, "ip netns exec %s ping6 -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP6_ADDR_DST); + return 0; +fail: + return -1; +} + +static int check_ping_fails(const char *ns1) +{ + int ret; + + ret = SYS_NOFAIL("ip netns exec %s ping -c 1 -W1 -I veth1 %s", ns1, IP4_ADDR_DST); + if (!ret) + return -1; + + ret = SYS_NOFAIL("ip netns exec %s ping6 -c 1 -W1 -I veth1 %s", ns1, IP6_ADDR_DST); + if (!ret) + return -1; + + return 0; +} + +#define EGRESS true +#define INGRESS false +#define IPV4_ENCAP true +#define IPV6_ENCAP false +static void lwt_ip_encap(bool ipv4_encap, bool egress, const char *vrf) +{ + char ns1[NETNS_NAME_SIZE] = NETNS_BASE "-1-"; + char ns2[NETNS_NAME_SIZE] = NETNS_BASE "-2-"; + char ns3[NETNS_NAME_SIZE] = NETNS_BASE "-3-"; + char *sec = ipv4_encap ? "encap_gre" : "encap_gre6"; + + if (!vrf) + return; + + if (!ASSERT_OK(create_ns(ns1, NETNS_NAME_SIZE), "create ns1")) + goto out; + if (!ASSERT_OK(create_ns(ns2, NETNS_NAME_SIZE), "create ns2")) + goto out; + if (!ASSERT_OK(create_ns(ns3, NETNS_NAME_SIZE), "create ns3")) + goto out; + + if (!ASSERT_OK(setup_network(ns1, ns2, ns3, vrf), "setup network")) + goto out; + + /* By default, pings work */ + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Remove NS2->DST routes, ping fails */ + SYS(out, "ip -n %s route del %s/32 dev veth3 %s", ns2, IP4_ADDR_DST, vrf); + SYS(out, "ip -n %s -6 route del %s/128 dev veth3 %s", ns2, IP6_ADDR_DST, vrf); + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Install replacement routes (LWT/eBPF), pings succeed */ + if (egress) { + SYS(out, "ip -n %s route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } else { + SYS(out, "ip -n %s route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } + + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Skip GSO tests with VRF: VRF routing needs properly assigned + * source IP/device, which is easy to do with ping but hard with TCP. + */ + if (egress && !vrf[0]) { + if (!ASSERT_OK(test_gso_fix(ns1, ns3, AF_INET), "test GSO")) + goto out; + } + + /* Negative test: remove routes to GRE devices: ping fails */ + if (!ASSERT_OK(remove_routes_to_gredev(ns1, ns2, vrf), "remove routes to gredev")) + goto out; + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Another negative test */ + if (!ASSERT_OK(add_unreachable_routes_to_gredev(ns1, ns2, vrf), + "add unreachable routes")) + goto out; + ASSERT_OK(check_ping_fails(ns1), "ping expected fail"); + +out: + SYS_NOFAIL("ip netns del %s", ns1); + SYS_NOFAIL("ip netns del %s", ns2); + SYS_NOFAIL("ip netns del %s", ns3); +} + +void test_lwt_ip_encap_vrf_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_vrf_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, ""); +} + +void test_lwt_ip_encap_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, ""); +} diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh deleted file mode 100755 index 1e565f47aca940d8dc7235d823c48537d7a708b8..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ /dev/null @@ -1,476 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Setup/topology: -# -# NS1 NS2 NS3 -# veth1 <---> veth2 veth3 <---> veth4 (the top route) -# veth5 <---> veth6 veth7 <---> veth8 (the bottom route) -# -# each vethN gets IPv[4|6]_N address -# -# IPv*_SRC = IPv*_1 -# IPv*_DST = IPv*_4 -# -# all tests test pings from IPv*_SRC to IPv*_DST -# -# by default, routes are configured to allow packets to go -# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) -# -# a GRE device is installed in NS3 with IPv*_GRE, and -# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 -# (the bottom route) -# -# Tests: -# -# 1. routes NS2->IPv*_DST are brought down, so the only way a ping -# from IP*_SRC to IP*_DST can work is via IPv*_GRE -# -# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth1:egress]->GRE:decap->DST -# ping replies go DST->SRC directly -# -# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST -# ping replies go DST->SRC directly - -BPF_FILE="test_lwt_ip_encap.bpf.o" -if [[ $EUID -ne 0 ]]; then - echo "This script must be run as root" - echo "FAIL" - exit 1 -fi - -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" - -readonly IPv4_1="172.16.1.100" -readonly IPv4_2="172.16.2.100" -readonly IPv4_3="172.16.3.100" -readonly IPv4_4="172.16.4.100" -readonly IPv4_5="172.16.5.100" -readonly IPv4_6="172.16.6.100" -readonly IPv4_7="172.16.7.100" -readonly IPv4_8="172.16.8.100" -readonly IPv4_GRE="172.16.16.100" - -readonly IPv4_SRC=$IPv4_1 -readonly IPv4_DST=$IPv4_4 - -readonly IPv6_1="fb01::1" -readonly IPv6_2="fb02::1" -readonly IPv6_3="fb03::1" -readonly IPv6_4="fb04::1" -readonly IPv6_5="fb05::1" -readonly IPv6_6="fb06::1" -readonly IPv6_7="fb07::1" -readonly IPv6_8="fb08::1" -readonly IPv6_GRE="fb10::1" - -readonly IPv6_SRC=$IPv6_1 -readonly IPv6_DST=$IPv6_4 - -TEST_STATUS=0 -TESTS_SUCCEEDED=0 -TESTS_FAILED=0 - -TMPFILE="" - -process_test_results() -{ - if [[ "${TEST_STATUS}" -eq 0 ]] ; then - echo "PASS" - TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) - else - echo "FAIL" - TESTS_FAILED=$((TESTS_FAILED+1)) - fi -} - -print_test_summary_and_exit() -{ - echo "passed tests: ${TESTS_SUCCEEDED}" - echo "failed tests: ${TESTS_FAILED}" - if [ "${TESTS_FAILED}" -eq "0" ] ; then - exit 0 - else - exit 1 - fi -} - -setup() -{ - set -e # exit on error - TEST_STATUS=0 - - # create devices and namespaces - ip netns add "${NS1}" - ip netns add "${NS2}" - ip netns add "${NS3}" - - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 - - # disable IPv6 DAD because it sometimes takes too long and fails tests - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0 - - ip link add veth1 type veth peer name veth2 - ip link add veth3 type veth peer name veth4 - ip link add veth5 type veth peer name veth6 - ip link add veth7 type veth peer name veth8 - - ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 - - ip link set veth1 netns ${NS1} - ip link set veth2 netns ${NS2} - ip link set veth3 netns ${NS2} - ip link set veth4 netns ${NS3} - ip link set veth5 netns ${NS1} - ip link set veth6 netns ${NS2} - ip link set veth7 netns ${NS2} - ip link set veth8 netns ${NS3} - - if [ ! -z "${VRF}" ] ; then - ip -netns ${NS1} link add red type vrf table 1001 - ip -netns ${NS1} link set red up - ip -netns ${NS1} route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} link set veth1 vrf red - ip -netns ${NS1} link set veth5 vrf red - - ip -netns ${NS2} link add red type vrf table 1001 - ip -netns ${NS2} link set red up - ip -netns ${NS2} route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} link set veth2 vrf red - ip -netns ${NS2} link set veth3 vrf red - ip -netns ${NS2} link set veth6 vrf red - ip -netns ${NS2} link set veth7 vrf red - fi - - # configure addesses: the top route (1-2-3-4) - ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 - ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 - ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 - ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 - ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 - ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 - ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 - ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 - - # configure addresses: the bottom route (5-6-7-8) - ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 - ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 - ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 - ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 - ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 - ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 - ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 - ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 - - ip -netns ${NS1} link set dev veth1 up - ip -netns ${NS2} link set dev veth2 up - ip -netns ${NS2} link set dev veth3 up - ip -netns ${NS3} link set dev veth4 up - ip -netns ${NS1} link set dev veth5 up - ip -netns ${NS2} link set dev veth6 up - ip -netns ${NS2} link set dev veth7 up - ip -netns ${NS3} link set dev veth8 up - - # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; - # the bottom route to specific bottom addresses - - # NS1 - # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default - # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} - - # NS2 - # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} - # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} - - # NS3 - # top route - ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 - ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 - ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} - ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} - # bottom route - ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 - ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 - ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} - ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} - - # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 - ip -netns ${NS3} link set gre_dev up - ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} - - - # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 - ip -netns ${NS3} link set gre6_dev up - ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) - - sleep 1 # reduce flakiness - set +e -} - -cleanup() -{ - if [ -f ${TMPFILE} ] ; then - rm ${TMPFILE} - fi - - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null -} - -trap cleanup EXIT - -remove_routes_to_gredev() -{ - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} -} - -add_unreachable_routes_to_gredev() -{ - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} -} - -test_ping() -{ - local readonly PROTO=$1 - local readonly EXPECTED=$2 - local RET=0 - - if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null - RET=$? - elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null - RET=$? - else - echo " test_ping: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - - if [ "0" != "${RET}" ]; then - RET=1 - fi - - if [ "${EXPECTED}" != "${RET}" ] ; then - echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" - TEST_STATUS=1 - fi -} - -test_gso() -{ - local readonly PROTO=$1 - local readonly PKT_SZ=5000 - local IP_DST="" - : > ${TMPFILE} # trim the capture file - - # check that nc is present - command -v nc >/dev/null 2>&1 || \ - { echo >&2 "nc is not available: skipping TSO tests"; return; } - - # listen on port 9000, capture TCP into $TMPFILE - if [ "${PROTO}" == "IPv4" ] ; then - IP_DST=${IPv4_DST} - ip netns exec ${NS3} bash -c \ - "nc -4 -l -p 9000 > ${TMPFILE} &" - elif [ "${PROTO}" == "IPv6" ] ; then - IP_DST=${IPv6_DST} - ip netns exec ${NS3} bash -c \ - "nc -6 -l -p 9000 > ${TMPFILE} &" - RET=$? - else - echo " test_gso: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - sleep 1 # let nc start listening - - # send a packet larger than MTU - ip netns exec ${NS1} bash -c \ - "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" - sleep 2 # let the packet get delivered - - # verify we received all expected bytes - SZ=$(stat -c %s ${TMPFILE}) - if [ "$SZ" != "$PKT_SZ" ] ; then - echo " test_gso failed: ${PROTO}" - TEST_STATUS=1 - fi -} - -test_egress() -{ - local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test ${VRF}" - setup - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - else - echo " unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # skip GSO tests with VRF: VRF routing needs properly assigned - # source IP/device, which is easy to do with ping and hard with dd/nc. - if [ -z "${VRF}" ] ; then - test_gso IPv4 - test_gso IPv6 - fi - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -test_ingress() -{ - local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test ${VRF}" - setup - - # need to wait a bit for IPv6 to autoconf, otherwise - # ping6 sometimes fails with "unable to bind to address" - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - else - echo "FAIL: unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -VRF="" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -VRF="vrf red" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -print_test_summary_and_exit
--- base-commit: 5fd21aaac37919abc5c5d0df1eb06a9f02518f27 change-id: 20250206-lwt_ip-b6a91d2787bf
Best regards,