Migrate the PCI endpoint test to Kselftest framework. All the tests that were part of the previous pcitest.sh file were migrated.
Below is the exclusive list of tests:
1. BAR0 Test 2. BAR1 Test 3. BAR2 Test 4. BAR3 Test 5. BAR4 Test 6. BAR5 Test 7. Consecutive BAR Tests 8. Legacy IRQ Tests 9. MSI Interrupt Tests (MSI1 to MSI32) 10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048) 11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) 15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) 16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
BAR, DMA and MEMCPY tests are added as fixture variants and can be executed separately as below:
$ pci_endpoint_test -v BAR0 $ pci_endpoint_test -v dma $ pci_endpoint_test -v memcpy
Co-developed-by: Aman Gupta aman1.gupta@samsung.com Signed-off-by: Aman Gupta aman1.gupta@samsung.com Co-developed-by: Padmanabhan Rajanbabu p.rajanbabu@samsung.com Signed-off-by: Padmanabhan Rajanbabu p.rajanbabu@samsung.com [mani: reworked based on the IOCTL fix, cleanups, documentation, commit message] Tested-by: Niklas Cassel cassel@kernel.org Reviewed-by: Niklas Cassel cassel@kernel.org Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- Documentation/PCI/endpoint/pci-test-howto.rst | 173 +++++------- tools/testing/selftests/Makefile | 1 + .../testing/selftests/pci_endpoint/.gitignore | 3 +- tools/testing/selftests/pci_endpoint/Build | 1 - tools/testing/selftests/pci_endpoint/Makefile | 59 +--- tools/testing/selftests/pci_endpoint/config | 4 + .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ .../testing/selftests/pci_endpoint/pcitest.c | 265 ------------------ .../testing/selftests/pci_endpoint/pcitest.sh | 73 ----- 9 files changed, 302 insertions(+), 498 deletions(-) delete mode 100644 tools/testing/selftests/pci_endpoint/Build create mode 100644 tools/testing/selftests/pci_endpoint/config create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.c delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.sh
diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst index c4ae7af50ede..7d5049c884dd 100644 --- a/Documentation/PCI/endpoint/pci-test-howto.rst +++ b/Documentation/PCI/endpoint/pci-test-howto.rst @@ -81,8 +81,8 @@ device, the following commands can be used::
# echo 0x104c > functions/pci_epf_test/func1/vendorid # echo 0xb500 > functions/pci_epf_test/func1/deviceid - # echo 16 > functions/pci_epf_test/func1/msi_interrupts - # echo 8 > functions/pci_epf_test/func1/msix_interrupts + # echo 32 > functions/pci_epf_test/func1/msi_interrupts + # echo 2048 > functions/pci_epf_test/func1/msix_interrupts
Binding pci-epf-test Device to EP Controller @@ -123,9 +123,9 @@ above:: Using Endpoint Test function Device -----------------------------------
-pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all -the default PCI endpoint tests. To compile this tool the following commands -should be used:: +Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all +the default PCI endpoint tests. To build the Kselftest for PCI endpoint +subsystem, the following commands should be used::
# cd <kernel-dir> # make -C tools/testing/selftests/pci_endpoint @@ -133,104 +133,73 @@ should be used:: or if you desire to compile and install in your system::
# cd <kernel-dir> - # make -C tools/testing/selftests/pci_endpoint install + # make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install
-The tool and script will be located in <rootfs>/usr/bin/ +The test will be located in <rootfs>/usr/bin/
- -pcitest.sh Output -~~~~~~~~~~~~~~~~~ +Kselftest Output +~~~~~~~~~~~~~~~~ ::
- # pcitest.sh - BAR tests - - BAR0: OKAY - BAR1: OKAY - BAR2: OKAY - BAR3: OKAY - BAR4: NOT OKAY - BAR5: NOT OKAY - - Interrupt tests - - SET IRQ TYPE TO LEGACY: OKAY - LEGACY IRQ: NOT OKAY - SET IRQ TYPE TO MSI: OKAY - MSI1: OKAY - MSI2: OKAY - MSI3: OKAY - MSI4: OKAY - MSI5: OKAY - MSI6: OKAY - MSI7: OKAY - MSI8: OKAY - MSI9: OKAY - MSI10: OKAY - MSI11: OKAY - MSI12: OKAY - MSI13: OKAY - MSI14: OKAY - MSI15: OKAY - MSI16: OKAY - MSI17: NOT OKAY - MSI18: NOT OKAY - MSI19: NOT OKAY - MSI20: NOT OKAY - MSI21: NOT OKAY - MSI22: NOT OKAY - MSI23: NOT OKAY - MSI24: NOT OKAY - MSI25: NOT OKAY - MSI26: NOT OKAY - MSI27: NOT OKAY - MSI28: NOT OKAY - MSI29: NOT OKAY - MSI30: NOT OKAY - MSI31: NOT OKAY - MSI32: NOT OKAY - SET IRQ TYPE TO MSI-X: OKAY - MSI-X1: OKAY - MSI-X2: OKAY - MSI-X3: OKAY - MSI-X4: OKAY - MSI-X5: OKAY - MSI-X6: OKAY - MSI-X7: OKAY - MSI-X8: OKAY - MSI-X9: NOT OKAY - MSI-X10: NOT OKAY - MSI-X11: NOT OKAY - MSI-X12: NOT OKAY - MSI-X13: NOT OKAY - MSI-X14: NOT OKAY - MSI-X15: NOT OKAY - MSI-X16: NOT OKAY - [...] - MSI-X2047: NOT OKAY - MSI-X2048: NOT OKAY - - Read Tests - - SET IRQ TYPE TO MSI: OKAY - READ ( 1 bytes): OKAY - READ ( 1024 bytes): OKAY - READ ( 1025 bytes): OKAY - READ (1024000 bytes): OKAY - READ (1024001 bytes): OKAY - - Write Tests - - WRITE ( 1 bytes): OKAY - WRITE ( 1024 bytes): OKAY - WRITE ( 1025 bytes): OKAY - WRITE (1024000 bytes): OKAY - WRITE (1024001 bytes): OKAY - - Copy Tests - - COPY ( 1 bytes): OKAY - COPY ( 1024 bytes): OKAY - COPY ( 1025 bytes): OKAY - COPY (1024000 bytes): OKAY - COPY (1024001 bytes): OKAY + # pci_endpoint_test + TAP version 13 + 1..16 + # Starting 16 tests from 9 test cases. + # RUN pci_ep_bar.BAR0.BAR_TEST ... + # OK pci_ep_bar.BAR0.BAR_TEST + ok 1 pci_ep_bar.BAR0.BAR_TEST + # RUN pci_ep_bar.BAR1.BAR_TEST ... + # OK pci_ep_bar.BAR1.BAR_TEST + ok 2 pci_ep_bar.BAR1.BAR_TEST + # RUN pci_ep_bar.BAR2.BAR_TEST ... + # OK pci_ep_bar.BAR2.BAR_TEST + ok 3 pci_ep_bar.BAR2.BAR_TEST + # RUN pci_ep_bar.BAR3.BAR_TEST ... + # OK pci_ep_bar.BAR3.BAR_TEST + ok 4 pci_ep_bar.BAR3.BAR_TEST + # RUN pci_ep_bar.BAR4.BAR_TEST ... + # OK pci_ep_bar.BAR4.BAR_TEST + ok 5 pci_ep_bar.BAR4.BAR_TEST + # RUN pci_ep_bar.BAR5.BAR_TEST ... + # OK pci_ep_bar.BAR5.BAR_TEST + ok 6 pci_ep_bar.BAR5.BAR_TEST + # RUN pci_ep_basic.CONSECUTIVE_BAR_TEST ... + # OK pci_ep_basic.CONSECUTIVE_BAR_TEST + ok 7 pci_ep_basic.CONSECUTIVE_BAR_TEST + # RUN pci_ep_basic.LEGACY_IRQ_TEST ... + # OK pci_ep_basic.LEGACY_IRQ_TEST + ok 8 pci_ep_basic.LEGACY_IRQ_TEST + # RUN pci_ep_basic.MSI_TEST ... + # OK pci_ep_basic.MSI_TEST + ok 9 pci_ep_basic.MSI_TEST + # RUN pci_ep_basic.MSIX_TEST ... + # OK pci_ep_basic.MSIX_TEST + ok 10 pci_ep_basic.MSIX_TEST + # RUN pci_ep_data_transfer.memcpy.READ_TEST ... + # OK pci_ep_data_transfer.memcpy.READ_TEST + ok 11 pci_ep_data_transfer.memcpy.READ_TEST + # RUN pci_ep_data_transfer.memcpy.WRITE_TEST ... + # OK pci_ep_data_transfer.memcpy.WRITE_TEST + ok 12 pci_ep_data_transfer.memcpy.WRITE_TEST + # RUN pci_ep_data_transfer.memcpy.COPY_TEST ... + # OK pci_ep_data_transfer.memcpy.COPY_TEST + ok 13 pci_ep_data_transfer.memcpy.COPY_TEST + # RUN pci_ep_data_transfer.dma.READ_TEST ... + # OK pci_ep_data_transfer.dma.READ_TEST + ok 14 pci_ep_data_transfer.dma.READ_TEST + # RUN pci_ep_data_transfer.dma.WRITE_TEST ... + # OK pci_ep_data_transfer.dma.WRITE_TEST + ok 15 pci_ep_data_transfer.dma.WRITE_TEST + # RUN pci_ep_data_transfer.dma.COPY_TEST ... + # OK pci_ep_data_transfer.dma.COPY_TEST + ok 16 pci_ep_data_transfer.dma.COPY_TEST + # PASSED: 16 / 16 tests passed. + # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0 + + +Testcase 16 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA +capable endpoint controllers due to the absence of the MEMCPY over DMA. For such +controllers, it is advisable to skip the forementioned testcase using below +command:: + + # pci_endpoint_test -f pci_ep_bar -f pci_ep_basic -v memcpy -T COPY_TEST -v dma diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 2401e973c359..50931cd6aff2 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -72,6 +72,7 @@ TARGETS += net/packetdrill TARGETS += net/rds TARGETS += net/tcp_ao TARGETS += nsfs +TARGETS += pci_endpoint TARGETS += pcie_bwctrl TARGETS += perf_events TARGETS += pidfd diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore index 29ab47c48484..6a4837a3e034 100644 --- a/tools/testing/selftests/pci_endpoint/.gitignore +++ b/tools/testing/selftests/pci_endpoint/.gitignore @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -*.o -pcitest +pci_endpoint_test diff --git a/tools/testing/selftests/pci_endpoint/Build b/tools/testing/selftests/pci_endpoint/Build deleted file mode 100644 index c375aea21790..000000000000 --- a/tools/testing/selftests/pci_endpoint/Build +++ /dev/null @@ -1 +0,0 @@ -pcitest-y += pcitest.o diff --git a/tools/testing/selftests/pci_endpoint/Makefile b/tools/testing/selftests/pci_endpoint/Makefile index 3c6fe18e32cc..bf21ebf20b4a 100644 --- a/tools/testing/selftests/pci_endpoint/Makefile +++ b/tools/testing/selftests/pci_endpoint/Makefile @@ -1,58 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -include ../../../scripts/Makefile.include +CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES) +LDFLAGS += -lrt -lpthread -lm
-bindir ?= /usr/bin +TEST_GEN_PROGS = pci_endpoint_test
-ifeq ($(srctree),) -srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) -endif - -# Do not use make's built-in rules -# (this improves performance and avoids hard-to-debug behaviour); -MAKEFLAGS += -r - -CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include - -ALL_TARGETS := pcitest -ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) - -SCRIPTS := pcitest.sh - -all: $(ALL_PROGRAMS) - -export srctree OUTPUT CC LD CFLAGS -include $(srctree)/tools/build/Makefile.include - -# -# We need the following to be outside of kernel tree -# -$(OUTPUT)include/linux/: ../../../../include/uapi/linux/ - mkdir -p $(OUTPUT)include/linux/ 2>&1 || true - ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@ - -$(info ${CURDIR}) -prepare: $(OUTPUT)include/linux/ - -PCITEST_IN := $(OUTPUT)pcitest-in.o -$(PCITEST_IN): prepare FORCE - $(Q)$(MAKE) $(build)=pcitest -$(OUTPUT)pcitest: $(PCITEST_IN) - $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ - -clean: - rm -f $(ALL_PROGRAMS) - rm -rf $(OUTPUT)include/ - find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '.*.cmd' -delete -o -name '.*.d' -delete - -install: $(ALL_PROGRAMS) - install -d -m 755 $(DESTDIR)$(bindir); \ - for program in $(ALL_PROGRAMS); do \ - install $$program $(DESTDIR)$(bindir); \ - done; \ - for script in $(SCRIPTS); do \ - install $$script $(DESTDIR)$(bindir); \ - done - -FORCE: - -.PHONY: all install clean FORCE prepare +include ../lib.mk diff --git a/tools/testing/selftests/pci_endpoint/config b/tools/testing/selftests/pci_endpoint/config new file mode 100644 index 000000000000..7cdcf117db8d --- /dev/null +++ b/tools/testing/selftests/pci_endpoint/config @@ -0,0 +1,4 @@ +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m +CONFIG_PCI_ENDPOINT_TEST=m diff --git a/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c new file mode 100644 index 000000000000..c267b822c108 --- /dev/null +++ b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Kselftest for PCI Endpoint Subsystem + * + * Copyright (c) 2022 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Author: Aman Gupta aman1.gupta@samsung.com + * + * Copyright (c) 2024, Linaro Ltd. + * Author: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org + */ + +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "../../../../include/uapi/linux/pcitest.h" + +#include "../kselftest_harness.h" + +#define pci_ep_ioctl(cmd, arg) \ +({ \ + ret = ioctl(self->fd, cmd, arg); \ + ret = ret < 0 ? -errno : 0; \ +}) + +static const char *test_device = "/dev/pci-endpoint-test.0"; +static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 }; + +FIXTURE(pci_ep_bar) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_bar) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_bar) +{ + close(self->fd); +} + +FIXTURE_VARIANT(pci_ep_bar) +{ + int barno; +}; + +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR0) { .barno = 0 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR1) { .barno = 1 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR2) { .barno = 2 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR3) { .barno = 3 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR4) { .barno = 4 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR5) { .barno = 5 }; + +TEST_F(pci_ep_bar, BAR_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_BAR, variant->barno); + EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", variant->barno); +} + +FIXTURE(pci_ep_basic) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_basic) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_basic) +{ + close(self->fd); +} + +TEST_F(pci_ep_basic, CONSECUTIVE_BAR_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_BARS, 0); + EXPECT_FALSE(ret) TH_LOG("Consecutive BAR test failed"); +} + +TEST_F(pci_ep_basic, LEGACY_IRQ_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0); + ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type"); + + pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0); + EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ"); +} + +TEST_F(pci_ep_basic, MSI_TEST) +{ + int ret, i; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 1; i <= 32; i++) { + pci_ep_ioctl(PCITEST_MSI, i); + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i); + } +} + +TEST_F(pci_ep_basic, MSIX_TEST) +{ + int ret, i; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type"); + + for (i = 1; i <= 2048; i++) { + pci_ep_ioctl(PCITEST_MSIX, i); + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i); + } +} + +FIXTURE(pci_ep_data_transfer) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_data_transfer) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_data_transfer) +{ + close(self->fd); +} + +FIXTURE_VARIANT(pci_ep_data_transfer) +{ + bool use_dma; +}; + +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy) +{ + .use_dma = false, +}; + +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma) +{ + .use_dma = true, +}; + +TEST_F(pci_ep_data_transfer, READ_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_READ, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} + +TEST_F(pci_ep_data_transfer, WRITE_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_WRITE, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} + +TEST_F(pci_ep_data_transfer, COPY_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_COPY, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/pci_endpoint/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c deleted file mode 100644 index b96cc118839b..000000000000 --- a/tools/testing/selftests/pci_endpoint/pcitest.c +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/** - * Userspace PCI Endpoint Test Module - * - * Copyright (C) 2017 Texas Instruments - * Author: Kishon Vijay Abraham I kishon@ti.com - */ - -#include <errno.h> -#include <fcntl.h> -#include <stdbool.h> -#include <stdio.h> -#include <stdlib.h> -#include <sys/ioctl.h> -#include <unistd.h> - -#include <linux/pcitest.h> - -static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; - -struct pci_test { - char *device; - char barnum; - bool consecutive_bar_test; - bool legacyirq; - unsigned int msinum; - unsigned int msixnum; - int irqtype; - bool set_irqtype; - bool get_irqtype; - bool clear_irq; - bool read; - bool write; - bool copy; - unsigned long size; - bool use_dma; -}; - -static int run_test(struct pci_test *test) -{ - struct pci_endpoint_test_xfer_param param = {}; - int ret = -EINVAL; - int fd; - - fd = open(test->device, O_RDWR); - if (fd < 0) { - perror("can't open PCI Endpoint Test device"); - return -ENODEV; - } - - if (test->barnum >= 0 && test->barnum <= 5) { - ret = ioctl(fd, PCITEST_BAR, test->barnum); - fprintf(stdout, "BAR%d:\t\t", test->barnum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->consecutive_bar_test) { - ret = ioctl(fd, PCITEST_BARS); - fprintf(stdout, "Consecutive BAR test:\t\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->set_irqtype) { - ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype); - fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->get_irqtype) { - ret = ioctl(fd, PCITEST_GET_IRQTYPE); - fprintf(stdout, "GET IRQ TYPE:\t\t"); - if (ret < 0) { - fprintf(stdout, "NOT OKAY\n"); - } else { - fprintf(stdout, "%s\n", irq[ret]); - ret = 0; - } - } - - if (test->clear_irq) { - ret = ioctl(fd, PCITEST_CLEAR_IRQ); - fprintf(stdout, "CLEAR IRQ:\t\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->legacyirq) { - ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); - fprintf(stdout, "LEGACY IRQ:\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->msinum > 0 && test->msinum <= 32) { - ret = ioctl(fd, PCITEST_MSI, test->msinum); - fprintf(stdout, "MSI%u:\t\t", test->msinum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->msixnum > 0 && test->msixnum <= 2048) { - ret = ioctl(fd, PCITEST_MSIX, test->msixnum); - fprintf(stdout, "MSI-X%u:\t\t", test->msixnum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->write) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_WRITE, ¶m); - fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->read) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_READ, ¶m); - fprintf(stdout, "READ (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->copy) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_COPY, ¶m); - fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - fflush(stdout); - close(fd); - return ret; -} - -int main(int argc, char **argv) -{ - int c; - struct pci_test *test; - - test = calloc(1, sizeof(*test)); - if (!test) { - perror("Fail to allocate memory for pci_test\n"); - return -ENOMEM; - } - - /* since '0' is a valid BAR number, initialize it to -1 */ - test->barnum = -1; - - /* set default size as 100KB */ - test->size = 0x19000; - - /* set default endpoint device */ - test->device = "/dev/pci-endpoint-test.0"; - - while ((c = getopt(argc, argv, "D:b:Cm:x:i:deIlhrwcs:")) != EOF) - switch (c) { - case 'D': - test->device = optarg; - continue; - case 'b': - test->barnum = atoi(optarg); - if (test->barnum < 0 || test->barnum > 5) - goto usage; - continue; - case 'C': - test->consecutive_bar_test = true; - continue; - case 'l': - test->legacyirq = true; - continue; - case 'm': - test->msinum = atoi(optarg); - if (test->msinum < 1 || test->msinum > 32) - goto usage; - continue; - case 'x': - test->msixnum = atoi(optarg); - if (test->msixnum < 1 || test->msixnum > 2048) - goto usage; - continue; - case 'i': - test->irqtype = atoi(optarg); - if (test->irqtype < 0 || test->irqtype > 2) - goto usage; - test->set_irqtype = true; - continue; - case 'I': - test->get_irqtype = true; - continue; - case 'r': - test->read = true; - continue; - case 'w': - test->write = true; - continue; - case 'c': - test->copy = true; - continue; - case 'e': - test->clear_irq = true; - continue; - case 's': - test->size = strtoul(optarg, NULL, 0); - continue; - case 'd': - test->use_dma = true; - continue; - case 'h': - default: -usage: - fprintf(stderr, - "usage: %s [options]\n" - "Options:\n" - "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n" - "\t-b <bar num> BAR test (bar number between 0..5)\n" - "\t-C Consecutive BAR test\n" - "\t-m <msi num> MSI test (msi number between 1..32)\n" - "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n" - "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n" - "\t-e Clear IRQ\n" - "\t-I Get current IRQ type configured\n" - "\t-d Use DMA\n" - "\t-l Legacy IRQ test\n" - "\t-r Read buffer test\n" - "\t-w Write buffer test\n" - "\t-c Copy buffer test\n" - "\t-s <size> Size of buffer {default: 100KB}\n" - "\t-h Print this help message\n", - argv[0]); - return -EINVAL; - } - - return run_test(test); -} diff --git a/tools/testing/selftests/pci_endpoint/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh deleted file mode 100644 index 770f4d6df34b..000000000000 --- a/tools/testing/selftests/pci_endpoint/pcitest.sh +++ /dev/null @@ -1,73 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 - -echo "BAR tests" -echo - -bar=0 - -while [ $bar -lt 6 ] -do - pcitest -b $bar - bar=`expr $bar + 1` -done -pcitest -C -echo - -echo "Interrupt tests" -echo - -pcitest -i 0 -pcitest -l - -pcitest -i 1 -msi=1 - -while [ $msi -lt 33 ] -do - pcitest -m $msi - msi=`expr $msi + 1` -done -echo - -pcitest -i 2 -msix=1 - -while [ $msix -lt 2049 ] -do - pcitest -x $msix - msix=`expr $msix + 1` -done -echo - -echo "Read Tests" -echo - -pcitest -i 1 - -pcitest -r -s 1 -pcitest -r -s 1024 -pcitest -r -s 1025 -pcitest -r -s 1024000 -pcitest -r -s 1024001 -echo - -echo "Write Tests" -echo - -pcitest -w -s 1 -pcitest -w -s 1024 -pcitest -w -s 1025 -pcitest -w -s 1024000 -pcitest -w -s 1024001 -echo - -echo "Copy Tests" -echo - -pcitest -c -s 1 -pcitest -c -s 1024 -pcitest -c -s 1025 -pcitest -c -s 1024000 -pcitest -c -s 1024001 -echo