Here is the test result after conversion.
]# ./l2tp.sh TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel [ OK ] TEST: IPv6 route through L2TP tunnel [ OK ] TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16 Tests failed: 0
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- tools/testing/selftests/net/l2tp.sh | 130 +++++++++++++--------------- 1 file changed, 62 insertions(+), 68 deletions(-)
diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh index 5782433886fc..88de7166c8ae 100755 --- a/tools/testing/selftests/net/l2tp.sh +++ b/tools/testing/selftests/net/l2tp.sh @@ -13,6 +13,7 @@ # 10.1.1.1 | | 10.1.2.1 # 2001:db8:1::1 | | 2001:db8:2::1
+source lib.sh VERBOSE=0 PAUSE_ON_FAIL=no
@@ -80,9 +81,6 @@ create_ns() [ -z "${addr}" ] && addr="-" [ -z "${addr6}" ] && addr6="-"
- ip netns add ${ns} - - ip -netns ${ns} link set lo up if [ "${addr}" != "-" ]; then ip -netns ${ns} addr add dev lo ${addr} fi @@ -133,12 +131,7 @@ connect_ns()
cleanup() { - local ns - - for ns in host-1 host-2 router - do - ip netns del ${ns} 2>/dev/null - done + cleanup_ns $host_1 $host_2 $router }
setup_l2tp_ipv4() @@ -146,28 +139,28 @@ setup_l2tp_ipv4() # # configure l2tpv3 tunnel on host-1 # - ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \ + ip -netns $host_1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \ encap ip local 10.1.1.1 remote 10.1.2.1 - ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \ + ip -netns $host_1 l2tp add session name l2tp4 tunnel_id 1041 \ session_id 1041 peer_session_id 1042 - ip -netns host-1 link set dev l2tp4 up - ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2 + ip -netns $host_1 link set dev l2tp4 up + ip -netns $host_1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
# # configure l2tpv3 tunnel on host-2 # - ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \ + ip -netns $host_2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \ encap ip local 10.1.2.1 remote 10.1.1.1 - ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \ + ip -netns $host_2 l2tp add session name l2tp4 tunnel_id 1042 \ session_id 1042 peer_session_id 1041 - ip -netns host-2 link set dev l2tp4 up - ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1 + ip -netns $host_2 link set dev l2tp4 up + ip -netns $host_2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
# # add routes to loopback addresses # - ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2 - ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1 + ip -netns $host_1 ro add 172.16.101.2/32 via 172.16.1.2 + ip -netns $host_2 ro add 172.16.101.1/32 via 172.16.1.1 }
setup_l2tp_ipv6() @@ -175,28 +168,28 @@ setup_l2tp_ipv6() # # configure l2tpv3 tunnel on host-1 # - ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \ + ip -netns $host_1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \ encap ip local 2001:db8:1::1 remote 2001:db8:2::1 - ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \ + ip -netns $host_1 l2tp add session name l2tp6 tunnel_id 1061 \ session_id 1061 peer_session_id 1062 - ip -netns host-1 link set dev l2tp6 up - ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2 + ip -netns $host_1 link set dev l2tp6 up + ip -netns $host_1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
# # configure l2tpv3 tunnel on host-2 # - ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \ + ip -netns $host_2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \ encap ip local 2001:db8:2::1 remote 2001:db8:1::1 - ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \ + ip -netns $host_2 l2tp add session name l2tp6 tunnel_id 1062 \ session_id 1062 peer_session_id 1061 - ip -netns host-2 link set dev l2tp6 up - ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1 + ip -netns $host_2 link set dev l2tp6 up + ip -netns $host_2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
# # add routes to loopback addresses # - ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2 - ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1 + ip -netns $host_1 -6 ro add fc00:101::2/128 via fc00:1::2 + ip -netns $host_2 -6 ro add fc00:101::1/128 via fc00:1::1 }
setup() @@ -205,21 +198,22 @@ setup() cleanup
set -e - create_ns host-1 172.16.101.1/32 fc00:101::1/128 - create_ns host-2 172.16.101.2/32 fc00:101::2/128 - create_ns router + setup_ns host_1 host_2 router + create_ns $host_1 172.16.101.1/32 fc00:101::1/128 + create_ns $host_2 172.16.101.2/32 fc00:101::2/128 + create_ns $router
- connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \ - router eth1 10.1.1.2/24 2001:db8:1::2/64 + connect_ns $host_1 eth0 10.1.1.1/24 2001:db8:1::1/64 \ + $router eth1 10.1.1.2/24 2001:db8:1::2/64
- connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \ - router eth2 10.1.2.2/24 2001:db8:2::2/64 + connect_ns $host_2 eth0 10.1.2.1/24 2001:db8:2::1/64 \ + $router eth2 10.1.2.2/24 2001:db8:2::2/64
- ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2 - ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2 + ip -netns $host_1 ro add 10.1.2.0/24 via 10.1.1.2 + ip -netns $host_1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
- ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2 - ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2 + ip -netns $host_2 ro add 10.1.1.0/24 via 10.1.2.2 + ip -netns $host_2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
setup_l2tp_ipv4 setup_l2tp_ipv6 @@ -231,38 +225,38 @@ setup_ipsec() # # IPv4 # - run_cmd host-1 ip xfrm policy add \ + run_cmd $host_1 ip xfrm policy add \ src 10.1.1.1 dst 10.1.2.1 dir out \ tmpl proto esp mode transport
- run_cmd host-1 ip xfrm policy add \ + run_cmd $host_1 ip xfrm policy add \ src 10.1.2.1 dst 10.1.1.1 dir in \ tmpl proto esp mode transport
- run_cmd host-2 ip xfrm policy add \ + run_cmd $host_2 ip xfrm policy add \ src 10.1.1.1 dst 10.1.2.1 dir in \ tmpl proto esp mode transport
- run_cmd host-2 ip xfrm policy add \ + run_cmd $host_2 ip xfrm policy add \ src 10.1.2.1 dst 10.1.1.1 dir out \ tmpl proto esp mode transport
- ip -netns host-1 xfrm state add \ + ip -netns $host_1 xfrm state add \ src 10.1.1.1 dst 10.1.2.1 \ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-1 xfrm state add \ + ip -netns $host_1 xfrm state add \ src 10.1.2.1 dst 10.1.1.1 \ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-2 xfrm state add \ + ip -netns $host_2 xfrm state add \ src 10.1.1.1 dst 10.1.2.1 \ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-2 xfrm state add \ + ip -netns $host_2 xfrm state add \ src 10.1.2.1 dst 10.1.1.1 \ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport @@ -270,38 +264,38 @@ setup_ipsec() # # IPV6 # - run_cmd host-1 ip -6 xfrm policy add \ + run_cmd $host_1 ip -6 xfrm policy add \ src 2001:db8:1::1 dst 2001:db8:2::1 dir out \ tmpl proto esp mode transport
- run_cmd host-1 ip -6 xfrm policy add \ + run_cmd $host_1 ip -6 xfrm policy add \ src 2001:db8:2::1 dst 2001:db8:1::1 dir in \ tmpl proto esp mode transport
- run_cmd host-2 ip -6 xfrm policy add \ + run_cmd $host_2 ip -6 xfrm policy add \ src 2001:db8:1::1 dst 2001:db8:2::1 dir in \ tmpl proto esp mode transport
- run_cmd host-2 ip -6 xfrm policy add \ + run_cmd $host_2 ip -6 xfrm policy add \ src 2001:db8:2::1 dst 2001:db8:1::1 dir out \ tmpl proto esp mode transport
- ip -netns host-1 -6 xfrm state add \ + ip -netns $host_1 -6 xfrm state add \ src 2001:db8:1::1 dst 2001:db8:2::1 \ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-1 -6 xfrm state add \ + ip -netns $host_1 -6 xfrm state add \ src 2001:db8:2::1 dst 2001:db8:1::1 \ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-2 -6 xfrm state add \ + ip -netns $host_2 -6 xfrm state add \ src 2001:db8:1::1 dst 2001:db8:2::1 \ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
- ip -netns host-2 -6 xfrm state add \ + ip -netns $host_2 -6 xfrm state add \ src 2001:db8:2::1 dst 2001:db8:1::1 \ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport @@ -309,10 +303,10 @@ setup_ipsec()
teardown_ipsec() { - run_cmd host-1 ip xfrm state flush - run_cmd host-1 ip xfrm policy flush - run_cmd host-2 ip xfrm state flush - run_cmd host-2 ip xfrm policy flush + run_cmd $host_1 ip xfrm state flush + run_cmd $host_1 ip xfrm policy flush + run_cmd $host_2 ip xfrm state flush + run_cmd $host_2 ip xfrm policy flush }
################################################################################ @@ -322,16 +316,16 @@ run_ping() { local desc="$1"
- run_cmd host-1 ping -c1 -w1 172.16.1.2 + run_cmd $host_1 ping -c1 -w1 172.16.1.2 log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
- run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
- run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2 log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
- run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 log_test $? 0 "IPv6 route through L2TP tunnel ${desc}" }
@@ -344,16 +338,16 @@ run_tests()
setup_ipsec run_ping "- with IPsec" - run_cmd host-1 ping -c1 -w1 172.16.1.2 + run_cmd $host_1 ping -c1 -w1 172.16.1.2 log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
- run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
- run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2 log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
- run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
teardown_ipsec