Adds a selftest that creates two virtual interfaces, assigns one to a new namespace, and assigns IP addresses to both.
It listens on the destination interface using socat and configures a dynamic target on netconsole, pointing to the destination IP address.
The test then checks if the message was received properly on the destination interface.
Signed-off-by: Breno Leitao leitao@debian.org --- Changelog:
v2: * Change the location of the path (Jakub) * Move from veth to netdevsim * Other small changes in dependency checks and cleanup
v1: * https://lore.kernel.org/all/ZqyUHN770pjSofTC@gmail.com/
MAINTAINERS | 1 + tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/netcons_basic.sh | 223 ++++++++++++++++++ 3 files changed, 225 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/netcons_basic.sh
diff --git a/MAINTAINERS b/MAINTAINERS index a9dace908305..ded45f1dff7e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15770,6 +15770,7 @@ M: Breno Leitao leitao@debian.org S: Maintained F: Documentation/networking/netconsole.rst F: drivers/net/netconsole.c +F: tools/testing/selftests/drivers/net/netcons_basic.sh
NETDEVSIM M: Jakub Kicinski kuba@kernel.org diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index e54f382bcb02..928530b26abc 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -3,6 +3,7 @@ TEST_INCLUDES := $(wildcard lib/py/*.py)
TEST_PROGS := \ + netcons_basic.sh \ ping.py \ queues.py \ stats.py \ diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh new file mode 100755 index 000000000000..e0e58fc7e89f --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -0,0 +1,223 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test creates two netdevsim virtual interfaces, assigns one of them (the +# "destination interface") to a new namespace, and assigns IP addresses to both +# interfaces. +# +# It listens on the destination interface using socat and configures a dynamic +# target on netconsole, pointing to the destination IP address. +# +# Finally, it checks whether the message was received properly on the +# destination interface. Note that this test may pollute the kernel log buffer +# (dmesg) and relies on dynamic configuration and namespaces being configured. +# +# Author: Breno Leitao leitao@debian.org + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +# Simple script to test dynamic targets in netconsole +SRCIF="" # to be populated later +SRCIP=192.168.1.1 +DSTIF="" # to be populated later +DSTIP=192.168.1.2 + +PORT="6666" +MSG="netconsole selftest" +TARGET=$(mktemp -u netcons_XXXXX) +NETCONS_CONFIGFS="/sys/kernel/config/netconsole" +NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" +# This will have some tmp values appended to it in set_network() +NAMESPACE="netconsns_dst" + +# IDs for netdevsim +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) + +# Used to create and delete namespaces +source "${SCRIPTDIR}"/../../net/lib.sh + +# Create netdevsim interfaces +create_ifaces() { + local NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device + + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW" + udevadm settle || true + + local NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID" + local NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID" + + # These are global variables + SRCIF=$(find "$NSIM_DEV_1_SYS"/net -maxdepth 1 -type d ! \ + -path "$NSIM_DEV_1_SYS"/net -exec basename {} ;) + DSTIF=$(find "$NSIM_DEV_2_SYS"/net -maxdepth 1 -type d ! \ + -path "$NSIM_DEV_2_SYS"/net -exec basename {} ;) +} + +link_ifaces() { + local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device" + local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex) + local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex) + + exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}" + exec {INITNS_FD}</proc/self/ns/net + + # Bind the dst interface to namespace + ip link set "${DSTIF}" netns "${NAMESPACE}" + + # Linking one device to the other one (on the other namespace} + echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX" > $NSIM_DEV_SYS_LINK + if [ $? -ne 0 ]; then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup + exit ${ksft_skip} + fi +} + +function configure_ip() { + # Configure the IPs for both interfaces + ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}" + ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up + + ip addr add "${SRCIP}"/24 dev "${SRCIF}" + ip link set "${SRCIF}" up +} + +function set_network() { + # This is coming from lib.sh. And it does unbound variable access + set +u + setup_ns "${NAMESPACE}" + set -u + NAMESPACE=${NS_LIST[0]} + + # Create both interfaces, and assign the destination to a different namespace + create_ifaces + + # Link both interfaces back to back + link_ifaces + + configure_ip +} + +function create_dynamic_target() { + DSTMAC=$(ip netns exec "${NAMESPACE}" ip link show "${DSTIF}" | awk '/ether/ {print $2}') + + # Create a dynamic target + mkdir "${NETCONS_PATH}" + + echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip + echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip + echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac + echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + + echo 1 > "${NETCONS_PATH}"/enabled +} + +function cleanup() { + local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" + + # delete netconsole dynamic reconfiguration + echo 0 > "${NETCONS_PATH}"/enabled + # Remove the configfs entry + rmdir "${NETCONS_PATH}" + + # Delete netdevsim devices + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL" + + # this is coming from lib.sh + cleanup_all_ns +} + +function listen_port_and_save_to() { + OUTPUT=${1} + # Just wait for 2 seconds + timeout 2 ip netns exec "${NAMESPACE}" socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}" +} + +function validate_result() { + TMPFILENAME="$1" + + # Check if the file exists + if [ ! -f "$TMPFILENAME" ]; then + echo "FAIL: File was not generated." >&2 + return ${ksft_fail} + fi + + if ! grep -q "${MSG}" "${TMPFILENAME}"; then + echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + return ${ksft_fail} + fi + + # Delete the file once it is validated, otherwise keep it + # for debugging purposes + rm "${TMPFILENAME}" + return ${ksft_pass} +} + +function check_for_dependencies() { + if [ "$(id -u)" -ne 0 ]; then + echo "This script must be run as root" >&2 + exit "${ksft_skip}" + fi + + if ! which socat > /dev/null ; then + echo "SKIP: socat(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which ip > /dev/null ; then + echo "SKIP: ip(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which udevadm > /dev/null ; then + echo "SKIP: udevadm(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if [ ! -d "${NETCONS_CONFIGFS}" ]; then + echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2 + exit "${ksft_skip}" + fi + + if ip link show "${DSTIF}" 2> /dev/null; then + echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." + exit "${ksft_skip}" + fi +} + +# ========== # +# Start here # +# ========== # +modprobe netdevsim || true +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Listed for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & + +# Wait for socat to start and listen to the port. +sleep 1 +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +sleep 1 + +# Make sure the message was received in the dst part +validate_result "${OUTPUT_FILE}" +ret=$? + +exit ${ret}