ir-loopback can transmit IR on one rc device and check the correct scancode and protocol is decoded on a different rc device. This can be used to check IR transmission between two rc devices. Using rc-loopback, we use it to check the IR encoders and decoders themselves.
No hardware is required for this test.
Signed-off-by: Sean Young sean@mess.org Cc: Shuah Khan shuah@kernel.org --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/ir/.gitignore | 1 + tools/testing/selftests/ir/Makefile | 5 + tools/testing/selftests/ir/ir_loopback.c | 199 ++++++++++++++++++++++ tools/testing/selftests/ir/ir_loopback.sh | 20 +++ 5 files changed, 226 insertions(+) create mode 100644 tools/testing/selftests/ir/.gitignore create mode 100644 tools/testing/selftests/ir/Makefile create mode 100644 tools/testing/selftests/ir/ir_loopback.c create mode 100755 tools/testing/selftests/ir/ir_loopback.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index f1fe492c8e17..995034ea5546 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -15,6 +15,7 @@ TARGETS += futex TARGETS += gpio TARGETS += intel_pstate TARGETS += ipc +TARGETS += ir TARGETS += kcmp TARGETS += kvm TARGETS += lib diff --git a/tools/testing/selftests/ir/.gitignore b/tools/testing/selftests/ir/.gitignore new file mode 100644 index 000000000000..070ea0c75fb8 --- /dev/null +++ b/tools/testing/selftests/ir/.gitignore @@ -0,0 +1 @@ +ir_loopback diff --git a/tools/testing/selftests/ir/Makefile b/tools/testing/selftests/ir/Makefile new file mode 100644 index 000000000000..f4ba8eb84b95 --- /dev/null +++ b/tools/testing/selftests/ir/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +TEST_PROGS := ir_loopback.sh +TEST_GEN_PROGS_EXTENDED := ir_loopback + +include ../lib.mk diff --git a/tools/testing/selftests/ir/ir_loopback.c b/tools/testing/selftests/ir/ir_loopback.c new file mode 100644 index 000000000000..858c19caf224 --- /dev/null +++ b/tools/testing/selftests/ir/ir_loopback.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +// test ir decoder +// +// Copyright (C) 2018 Sean Young sean@mess.org + +// When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback +// will send this IR to the receiver side, where we try to read the decoded +// IR. Decoding happens in a separate kernel thread, so we will need to +// wait until that is scheduled, hence we use poll to check for read +// readiness. + +#include <linux/lirc.h> +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <string.h> +#include <unistd.h> +#include <poll.h> +#include <time.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <dirent.h> +#include <sys/stat.h> +#include <fcntl.h> +#include "../kselftest.h" + +#define TEST_SCANCODES 10 +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +static const struct { + enum rc_proto proto; + const char *name; + unsigned int mask; + const char *decoder; +} protocols[] = { + { RC_PROTO_RC5, "rc-5", 0x1f7f, "rc-5" }, + { RC_PROTO_RC5X_20, "rc-5x-20", 0x1f7f3f, "rc-5" }, + { RC_PROTO_RC5_SZ, "rc-5-sz", 0x2fff, "rc-5-sz" }, + { RC_PROTO_JVC, "jvc", 0xffff, "jvc" }, + { RC_PROTO_SONY12, "sony-12", 0x1f007f, "sony" }, + { RC_PROTO_SONY15, "sony-15", 0xff007f, "sony" }, + { RC_PROTO_SONY20, "sony-20", 0x1fff7f, "sony" }, + { RC_PROTO_NEC, "nec", 0xffff, "nec" }, + { RC_PROTO_NECX, "nec-x", 0xffffff, "nec" }, + { RC_PROTO_NEC32, "nec-32", 0xffffffff, "nec" }, + { RC_PROTO_SANYO, "sanyo", 0x1fffff, "sanyo" }, + { RC_PROTO_RC6_0, "rc-6-0", 0xffff, "rc-6" }, + { RC_PROTO_RC6_6A_20, "rc-6-6a-20", 0xfffff, "rc-6" }, + { RC_PROTO_RC6_6A_24, "rc-6-6a-24", 0xffffff, "rc-6" }, + { RC_PROTO_RC6_6A_32, "rc-6-6a-32", 0xffffffff, "rc-6" }, + { RC_PROTO_RC6_MCE, "rc-6-mce", 0x00007fff, "rc-6" }, + { RC_PROTO_SHARP, "sharp", 0x1fff, "sharp" }, +}; + +int lirc_open(const char *rc) +{ + struct dirent *dent; + char buf[100]; + DIR *d; + int fd; + + snprintf(buf, sizeof(buf), "/sys/class/rc/%s", rc); + + d = opendir(buf); + if (!d) + ksft_exit_fail_msg("cannot open %s: %m\n", buf); + + while ((dent = readdir(d)) != NULL) { + if (!strncmp(dent->d_name, "lirc", 4)) { + snprintf(buf, sizeof(buf), "/dev/%s", dent->d_name); + break; + } + } + + if (!dent) + ksft_exit_fail_msg("cannot find lirc device for %s\n", rc); + + closedir(d); + + fd = open(buf, O_RDWR | O_NONBLOCK); + if (fd == -1) + ksft_exit_fail_msg("cannot open: %s: %m\n", buf); + + return fd; +} + +int main(int argc, char **argv) +{ + unsigned int mode; + char buf[100]; + int rlircfd, wlircfd, protocolfd, i, n; + + srand(time(NULL)); + + if (argc != 3) + ksft_exit_fail_msg("Usage: %s <write rcN> <read rcN>\n", + argv[0]); + + rlircfd = lirc_open(argv[2]); + mode = LIRC_MODE_SCANCODE; + if (ioctl(rlircfd, LIRC_SET_REC_MODE, &mode)) + ksft_exit_fail_msg("failed to set scancode rec mode %s: %m\n", + argv[2]); + + wlircfd = lirc_open(argv[1]); + if (ioctl(wlircfd, LIRC_SET_SEND_MODE, &mode)) + ksft_exit_fail_msg("failed to set scancode send mode %s: %m\n", + argv[1]); + + snprintf(buf, sizeof(buf), "/sys/class/rc/%s/protocols", argv[2]); + protocolfd = open(buf, O_WRONLY); + if (protocolfd == -1) + ksft_exit_fail_msg("failed to open %s: %m\n", buf); + + printf("Sending IR on %s and receiving IR on %s.\n", argv[1], argv[2]); + + for (i = 0; i < ARRAY_SIZE(protocols); i++) { + if (write(protocolfd, protocols[i].decoder, + strlen(protocols[i].decoder)) == -1) + ksft_exit_fail_msg("failed to set write decoder\n"); + + printf("Testing protocol %s for decoder %s (%d/%d)...\n", + protocols[i].name, protocols[i].decoder, + i + 1, (int)ARRAY_SIZE(protocols)); + + for (n = 0; n < TEST_SCANCODES; n++) { + unsigned int scancode = rand() & protocols[i].mask; + unsigned int rc_proto = protocols[i].proto; + + if (rc_proto == RC_PROTO_RC6_MCE) + scancode |= 0x800f0000; + + if (rc_proto == RC_PROTO_NECX && + (((scancode >> 16) ^ ~(scancode >> 8)) & 0xff) == 0) + continue; + + if (rc_proto == RC_PROTO_NEC32 && + (((scancode >> 8) ^ ~scancode) & 0xff) == 0) + continue; + + struct lirc_scancode lsc = { + .rc_proto = rc_proto, + .scancode = scancode + }; + + printf("Testing scancode:%x\n", scancode); + + while (write(wlircfd, &lsc, sizeof(lsc)) < 0) { + if (errno == EINTR) + continue; + + ksft_exit_fail_msg("failed to send ir: %m\n"); + } + + struct pollfd pfd = { .fd = rlircfd, .events = POLLIN }; + struct lirc_scancode lsc2; + + poll(&pfd, 1, 1000); + + bool decoded = true; + + while (read(rlircfd, &lsc2, sizeof(lsc2)) < 0) { + if (errno == EINTR) + continue; + + ksft_test_result_error("no scancode decoded: %m\n"); + decoded = false; + break; + } + + if (!decoded) + continue; + + if (lsc.rc_proto != lsc2.rc_proto) + ksft_test_result_error("decoded protocol is different: %d\n", + lsc2.rc_proto); + + else if (lsc.scancode != lsc2.scancode) + ksft_test_result_error("decoded scancode is different: %llx\n", + lsc2.scancode); + else + ksft_inc_pass_cnt(); + } + + printf("OK\n"); + } + + close(rlircfd); + close(wlircfd); + close(protocolfd); + + if (ksft_get_fail_cnt() > 0) + ksft_exit_fail(); + else + ksft_exit_pass(); + + return 0; +} diff --git a/tools/testing/selftests/ir/ir_loopback.sh b/tools/testing/selftests/ir/ir_loopback.sh new file mode 100755 index 000000000000..0a0b8dfa39be --- /dev/null +++ b/tools/testing/selftests/ir/ir_loopback.sh @@ -0,0 +1,20 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +if ! /sbin/modprobe -q -n rc-loopback; then + echo "ir_loopback: module rc-loopback is not found [SKIP]" + exit $ksft_skip +fi + +/sbin/modprobe rc-loopback +if [ $? -ne 0 ]; then + exit +fi + +RCDEV=$(grep -l DRV_NAME=rc-loopback /sys/class/rc/rc*/uevent | grep -o 'rc[0-9]+') + +./ir_loopback $RCDEV $RCDEV +exit