From: Yang Xu xuyang2018.jy@fujitsu.com
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]
If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup.
The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel.
Signed-off-by: Yang Xu xuyang2018.jy@fujitsu.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-)
diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh"
-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh
run_zram () { @@ -18,14 +15,4 @@ echo ""
check_prereqs
-# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo"
zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount
zram_fill_fs zram_cleanup -zram_unload
if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload
if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev alexey.kodanev@oracle.com # Modified: Naresh Kamboju naresh.kamboju@linaro.org
-MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done
- for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done
- for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done
-} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi
-zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi }
zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi
- if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" }
zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi
- local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream"
i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done
echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm"
- local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done
echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done
echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)"
- local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done
echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff()
zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \