From: Liu, Yi L yi.l.liu@intel.com Sent: Thursday, December 21, 2023 11:40 PM
+int iommufd_hwpt_invalidate(struct iommufd_ucmd *ucmd) +{
- struct iommu_hwpt_invalidate *cmd = ucmd->cmd;
- struct iommu_user_data_array data_array = {
.type = cmd->req_type,.uptr = u64_to_user_ptr(cmd->reqs_uptr),.entry_len = cmd->req_len,.entry_num = cmd->req_num,- };
- struct iommufd_hw_pagetable *hwpt;
- u32 done_num = 0;
- int rc;
- if (cmd->req_num && (!cmd->reqs_uptr || !cmd->req_len)) {
rc = -EINVAL;goto out;- }
miss a check on the __reserved field.
@@ -323,6 +323,7 @@ union ucmd_buffer { struct iommu_hwpt_alloc hwpt; struct iommu_hwpt_get_dirty_bitmap get_dirty_bitmap; struct iommu_hwpt_set_dirty_tracking set_dirty_tracking;
- struct iommu_hwpt_invalidate cache;
this should be in alphabetic order. I gave this comment in v6 too:
https://lore.kernel.org/linux-iommu/BN9PR11MB5276D8406BF08B853329288C8CB4A@B...
+/**
- enum iommu_hwpt_invalidate_data_type - IOMMU HWPT Cache
Invalidation
Data Type
- @IOMMU_HWPT_INVALIDATE_DATA_VTD_S1: Invalidation data for
VTD_S1
- */
+enum iommu_hwpt_invalidate_data_type {
- IOMMU_HWPT_INVALIDATE_DATA_VTD_S1,
+};
Defining DATA_VTD_S1 at this point is fine, if there is no usage on DATA_NONE. But following vtd specific definitions should be moved to the later vtd specific patches. they are not used by the common code anyway.
+/**
- enum iommu_hwpt_vtd_s1_invalidate_flags - Flags for Intel VT-d
stage-1 cache invalidation
- @IOMMU_VTD_INV_FLAGS_LEAF: The LEAF flag indicates whether only
the
leaf PTE caching needs to be invalidated
and other paging structure caches can be
preserved.
"indicates whether the invalidation applies to all-levels page structure cache or just the leaf PTE cache"
- */
+enum iommu_hwpt_vtd_s1_invalidate_flags {
- IOMMU_VTD_INV_FLAGS_LEAF = 1 << 0,
+};
+/**
- enum iommu_hwpt_vtd_s1_invalidate_error - Result of invalidation
"hardware error of invalidation"
- @IOMMU_HWPT_INVALIDATE_VTD_S1_ICE: Invalidation Completion
Error, details
refer to 11.4.7.1 Fault Status Register
of VT-d specification.
- @IOMMU_HWPT_INVALIDATE_VTD_S1_ITE: Invalidation Time-out Error,
details
refer to 11.4.7.1 Fault Status Register
of VT-d specification.- */
+enum iommu_hwpt_vtd_s1_invalidate_error {
- IOMMU_HWPT_INVALIDATE_VTD_S1_ICE = 1 << 0,
- IOMMU_HWPT_INVALIDATE_VTD_S1_ITE = 1 << 1,
+};
+/**
- struct iommu_hwpt_vtd_s1_invalidate - Intel VT-d cache invalidation
(IOMMU_HWPT_INVALIDATE_DATA_VTD_S1)
- @addr: The start address of the addresses to be invalidated. It needs
to be 4KB aligned.
'of the range'
- @npages: Number of contiguous 4K pages to be invalidated.
- @flags: Combination of enum iommu_hwpt_vtd_s1_invalidate_flags
- @inv_error: One of enum iommu_hwpt_vtd_s1_invalidate_error
'@hw_error'
- The Intel VT-d specific invalidation data for user-managed stage-1 cache
- invalidation in nested translation. Userspace uses this structure to
- tell the impacted cache scope after modifying the stage-1 page table.
- Invalidating all the caches related to the page table by setting @addr
- to be 0 and @npages to be U64_MAX.
here should clarify that the invalidation applies to device TLB automatically for VT-d.
- @inv_error is meaningful only if the request is handled by kernel. This
- can be known by checking struct iommu_hwpt_invalidate::req_num
output.
- @inv_error only covers the errors detected by hardware after submitting
the
- invalidation. The software detected errors would go through the normal
- ioctl errno.
- */
+struct iommu_hwpt_vtd_s1_invalidate {
- __aligned_u64 addr;
- __aligned_u64 npages;
- __u32 flags;
- __u32 inv_error;
+};
+/**
- struct iommu_hwpt_invalidate - ioctl(IOMMU_HWPT_INVALIDATE)
- @size: sizeof(struct iommu_hwpt_invalidate)
- @hwpt_id: HWPT ID of a nested HWPT for cache invalidation
- @reqs_uptr: User pointer to an array having @req_num of cache
invalidation
requests. The request entries in the array are of fixed width
@req_len, and contain a user data structure for invalidation
request specific to the given hardware page table.
Just:
'User pointer to an array of driver-specific cache invalidation requests'
- @req_type: One of enum iommu_hwpt_invalidate_data_type, defining
the data
type of all the entries in the invalidation request array. It
should be a type supported by the hwpt pointed by @hwpt_id.
- @req_len: Length (in bytes) of a request entry in the request array
- @req_num: Input the number of cache invalidation requests in the array.
Output the number of requests successfully handled by kernel.
- @__reserved: Must be 0.
- Invalidate the iommu cache for user-managed page table. Modifications
on a
- user-managed page table should be followed by this operation to sync
cache.
- Each ioctl can support one or more cache invalidation requests in the
array
- that has a total size of @req_len * @req_num.
- An empty invalidation request array by setting @req_num==0 is allowed,
and
- @req_len and @reqs_uptr would be ignored in this case. This can be
used to
- check if the given @req_type is supported or not by kernel.
- */
+struct iommu_hwpt_invalidate {
- __u32 size;
- __u32 hwpt_id;
- __aligned_u64 reqs_uptr;
- __u32 req_type;
- __u32 req_len;
- __u32 req_num;
- __u32 __reserved;
+}; +#define IOMMU_HWPT_INVALIDATE _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_INVALIDATE)
#endif
2.34.1