On Fri, Sep 27, 2024 at 08:12:40PM +0800, Yi Liu wrote:
External email: Use caution opening links or attachments
On 2024/9/27 14:02, Nicolin Chen wrote:
On Fri, Sep 27, 2024 at 01:38:08PM +0800, Yi Liu wrote:
Does it mean each vIOMMU of VM can only have one s2 HWPT?
Giving some examples here:
- If a VM has 1 vIOMMU, there will be 1 vIOMMU object in the kernel holding one S2 HWPT.
- If a VM has 2 vIOMMUs, there will be 2 vIOMMU objects in the kernel that can hold two different S2 HWPTs, or share one S2 HWPT (saving memory).
So if you have two devices assigned to a VM, then you may have two vIOMMUs or one vIOMMU exposed to guest. This depends on whether the two devices are behind the same physical IOMMU. If it's two vIOMMUs, the two can share the s2 hwpt if their physical IOMMU is compatible. is it?
Yes.
To achieve the above, you need to know if the physical IOMMUs of the assigned devices, hence be able to tell if physical IOMMUs are the same and if they are compatible. How would userspace know such infos?
My draft implementation with QEMU does something like this:
- List all viommu-matched iommu nodes under /sys/class/iommu: LINKs
- Get PCI device's /sys/bus/pci/devices/0000:00:00.0/iommu: LINK0
- Compare the LINK0 against the LINKs
We so far don't have an ID for physical IOMMU instance, which can be an alternative to return via the hw_info call, otherwise.
intel platform has a kind of ID for the physical IOMMUs.
ls /sys/class/iommu/ dmar0 dmar1 dmar10 dmar11 dmar12 dmar13 dmar14 dmar15 dmar16 dmar17 dmar18 dmar19 dmar2 dmar3 dmar4 dmar5 dmar6 dmar7 dmar8 dmar9 iommufd_selftest_iommu.0
Wow, that's a lot of IOMMU devices. I somehow had an impression that Intel uses one physical IOMMU..
Yea, we need something in the core. I had one patch previously: https://github.com/nicolinc/iommufd/commit/b7520901184fd9fa127abb88c1f0be16b...
QEMU then does the routing to assign PCI buses and IORT (or DT). This part is suggested now to move to libvirt though. So, I think at the end of the day, libvirt would run the sys check and assign a device to the corresponding pci bus backed by the correct IOMMU.
and also give the correct viommu for the device.
In this design, a pxb bus is exclusively created for a viommu instance, meaning so long as device is assigned to the correct bus number, it'll be linked to the correct viommu.
This gives an example showing two devices behind iommu0 and third device behind iommu1 are assigned to a VM: -device pxb-pcie.id=pcie.viommu0,bus=pcie.0.... \ # bus for viommu0 -device pxb-pcie.id=pcie.viommu1,bus=pcie.0.... \ # bus for viommu1 -device pcie-root-port,id=pcie.viommu0p0,bus=pcie.viommu0... \ -device pcie-root-port,id=pcie.viommu0p1,bus=pcie.viommu0... \ -device pcie-root-port,id=pcie.viommu1p0,bus=pcie.viommu1... \ -device vfio-pci,bus=pcie.viommu0p0... \ # connect to bus for viommu0 -device vfio-pci,bus=pcie.viommu0p1... \ # connect to bus for viommu0 -device vfio-pci,bus=pcie.viommu1p0... # connect to bus for viommu1
is the viommu# an "-object" or just hints to describe the relationship between device and viommu and build the IORT?
Yes. Eric actually suggested something better for the relationship between pxb-pcie with viommu:
-device pxb-pcie,bus_nr=100,id=pci.12,numa_node=0,bus=pcie.0,addr=0x3,iommu=<id> from: https://lore.kernel.org/qemu-devel/9c3e95c2-1035-4a55-89a3-97165ef32f18@redh...
This would likely help the IORT or Device Tree building.
Currently, ARM VIRT machine doesn't create a vSMMU via a "-device" string, i.e. not a plugable module yet. I recall Intel does. So, you guys are one step ahead.
I'm considering how it would look like if the QEMU Intel vIOMMU is going to use the viommu obj. Currently, we only support one virtual VT-d due to some considerations like hot-plug. Per your conversation with Kevin, it seems to be supported. So there is no strict connection between vIOMMU and vIOMMU obj. But the vIOMMU obj can only be connected with one pIOMMU. right?
Yes. Most of my earlier vSMMU versions did something similar, e.g. one shared vSMMU instance in the QEMU holding a list of S2 hwpts. With this new iommufd viommu object, it would be a list of viommu objs. Eric suggested that HostIOMMUDevice could store any pIOMMU info. So, compatibility check can be done with that (or the old fashioned way of trying an device attach).
The invalidation on the other hand needs to identify each trapped invalidation request to distribute it to the correct viommu. This is also one of the cons of this shared viommu model: invalidation inefficiency -- there can be some cases where we fail to identify which viommu to distribute so we have to broadcast to all viommus. With a multi-viommu-instance model, invalidations are distributed naturally by the guest kernel.
Thanks Nicolin