Add offset to request_firmware_into_buf to allow for portions of firmware file to be read into a buffer. Necessary where firmware needs to be loaded in portions from file in memory constrained systems.
Signed-off-by: Scott Branden scott.branden@broadcom.com --- drivers/base/firmware_loader/firmware.h | 5 +++ drivers/base/firmware_loader/main.c | 53 +++++++++++++++++-------- drivers/i2c/i2c-slave-eeprom.c | 4 +- drivers/soc/qcom/mdt_loader.c | 7 +++- include/linux/firmware.h | 8 +++- lib/test_firmware.c | 4 +- 6 files changed, 59 insertions(+), 22 deletions(-)
diff --git a/drivers/base/firmware_loader/firmware.h b/drivers/base/firmware_loader/firmware.h index 933e2192fbe8..c9b6ba8d29d8 100644 --- a/drivers/base/firmware_loader/firmware.h +++ b/drivers/base/firmware_loader/firmware.h @@ -32,6 +32,8 @@ * @FW_OPT_FALLBACK_PLATFORM: Enable fallback to device fw copy embedded in * the platform's main firmware. If both this fallback and the sysfs * fallback are enabled, then this fallback will be tried first. + * @FW_OPT_PARTIAL: Allow partial read of firmware instead of needing to read + * entire file. */ enum fw_opt { FW_OPT_UEVENT = BIT(0), @@ -41,6 +43,7 @@ enum fw_opt { FW_OPT_NOCACHE = BIT(4), FW_OPT_NOFALLBACK_SYSFS = BIT(5), FW_OPT_FALLBACK_PLATFORM = BIT(6), + FW_OPT_PARTIAL = BIT(7), };
enum fw_status { @@ -68,6 +71,8 @@ struct fw_priv { void *data; size_t size; size_t allocated_size; + size_t offset; + enum kernel_pread_opt opt; #ifdef CONFIG_FW_LOADER_PAGED_BUF bool is_paged_buf; struct page **pages; diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c index ca871b13524e..93e7fee42cd4 100644 --- a/drivers/base/firmware_loader/main.c +++ b/drivers/base/firmware_loader/main.c @@ -167,7 +167,9 @@ static int fw_cache_piggyback_on_request(const char *name);
static struct fw_priv *__allocate_fw_priv(const char *fw_name, struct firmware_cache *fwc, - void *dbuf, size_t size) + void *dbuf, size_t size, + size_t offset, + enum kernel_pread_opt opt) { struct fw_priv *fw_priv;
@@ -185,6 +187,8 @@ static struct fw_priv *__allocate_fw_priv(const char *fw_name, fw_priv->fwc = fwc; fw_priv->data = dbuf; fw_priv->allocated_size = size; + fw_priv->offset = offset; + fw_priv->opt = opt; fw_state_init(fw_priv); #ifdef CONFIG_FW_LOADER_USER_HELPER INIT_LIST_HEAD(&fw_priv->pending_list); @@ -210,9 +214,11 @@ static struct fw_priv *__lookup_fw_priv(const char *fw_name) static int alloc_lookup_fw_priv(const char *fw_name, struct firmware_cache *fwc, struct fw_priv **fw_priv, void *dbuf, - size_t size, u32 opt_flags) + size_t size, u32 opt_flags, + size_t offset) { struct fw_priv *tmp; + enum kernel_pread_opt pread_opt;
spin_lock(&fwc->lock); if (!(opt_flags & FW_OPT_NOCACHE)) { @@ -226,7 +232,12 @@ static int alloc_lookup_fw_priv(const char *fw_name, } }
- tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size); + if (opt_flags & FW_OPT_PARTIAL) + pread_opt = KERNEL_PREAD_PART; + else + pread_opt = KERNEL_PREAD_WHOLE; + + tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size, offset, pread_opt); if (tmp) { INIT_LIST_HEAD(&tmp->list); if (!(opt_flags & FW_OPT_NOCACHE)) @@ -495,8 +506,10 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv, fw_priv->size = 0;
/* load firmware files from the mount namespace of init */ - rc = kernel_read_file_from_path_initns(path, &buffer, - &size, msize, id); + rc = kernel_pread_file_from_path_initns(path, &buffer, + &size, fw_priv->offset, + msize, + fw_priv->opt, id); if (rc) { if (rc != -ENOENT) dev_warn(device, "loading %s failed with error %d\n", @@ -683,7 +696,7 @@ int assign_fw(struct firmware *fw, struct device *device, u32 opt_flags) static int _request_firmware_prepare(struct firmware **firmware_p, const char *name, struct device *device, void *dbuf, size_t size, - u32 opt_flags) + u32 opt_flags, size_t offset) { struct firmware *firmware; struct fw_priv *fw_priv; @@ -702,7 +715,7 @@ _request_firmware_prepare(struct firmware **firmware_p, const char *name, }
ret = alloc_lookup_fw_priv(name, &fw_cache, &fw_priv, dbuf, size, - opt_flags); + opt_flags, offset);
/* * bind with 'priv' now to avoid warning in failure path @@ -749,7 +762,7 @@ static void fw_abort_batch_reqs(struct firmware *fw) static int _request_firmware(const struct firmware **firmware_p, const char *name, struct device *device, void *buf, size_t size, - u32 opt_flags) + u32 opt_flags, size_t offset) { struct firmware *fw = NULL; int ret; @@ -763,7 +776,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name, }
ret = _request_firmware_prepare(&fw, name, device, buf, size, - opt_flags); + opt_flags, offset); if (ret <= 0) /* error or already assigned */ goto out;
@@ -826,7 +839,7 @@ request_firmware(const struct firmware **firmware_p, const char *name, /* Need to pin this module until return */ __module_get(THIS_MODULE); ret = _request_firmware(firmware_p, name, device, NULL, 0, - FW_OPT_UEVENT); + FW_OPT_UEVENT, 0); module_put(THIS_MODULE); return ret; } @@ -853,7 +866,7 @@ int firmware_request_nowarn(const struct firmware **firmware, const char *name, /* Need to pin this module until return */ __module_get(THIS_MODULE); ret = _request_firmware(firmware, name, device, NULL, 0, - FW_OPT_UEVENT | FW_OPT_NO_WARN); + FW_OPT_UEVENT | FW_OPT_NO_WARN, 0); module_put(THIS_MODULE); return ret; } @@ -878,7 +891,7 @@ int request_firmware_direct(const struct firmware **firmware_p, __module_get(THIS_MODULE); ret = _request_firmware(firmware_p, name, device, NULL, 0, FW_OPT_UEVENT | FW_OPT_NO_WARN | - FW_OPT_NOFALLBACK_SYSFS); + FW_OPT_NOFALLBACK_SYSFS, 0); module_put(THIS_MODULE); return ret; } @@ -902,7 +915,7 @@ int firmware_request_platform(const struct firmware **firmware, /* Need to pin this module until return */ __module_get(THIS_MODULE); ret = _request_firmware(firmware, name, device, NULL, 0, - FW_OPT_UEVENT | FW_OPT_FALLBACK_PLATFORM); + FW_OPT_UEVENT | FW_OPT_FALLBACK_PLATFORM, 0); module_put(THIS_MODULE); return ret; } @@ -939,6 +952,8 @@ EXPORT_SYMBOL_GPL(firmware_request_cache); * @device: device for which firmware is being loaded and DMA region allocated * @buf: address of buffer to load firmware into * @size: size of buffer + * @offset: offset into file to read + * @pread_opt: KERNEL_PREAD_PART to allow partial file read * * This function works pretty much like request_firmware(), but it doesn't * allocate a buffer to hold the firmware data. Instead, the firmware @@ -949,16 +964,22 @@ EXPORT_SYMBOL_GPL(firmware_request_cache); */ int request_firmware_into_buf(const struct firmware **firmware_p, const char *name, - struct device *device, void *buf, size_t size) + struct device *device, void *buf, size_t size, + size_t offset, enum kernel_pread_opt pread_opt) { int ret; + u32 opt_flags;
if (fw_cache_is_setup(device, name)) return -EOPNOTSUPP;
__module_get(THIS_MODULE); + opt_flags = FW_OPT_UEVENT | FW_OPT_NOCACHE; + if (pread_opt == KERNEL_PREAD_PART) + opt_flags |= FW_OPT_PARTIAL; + ret = _request_firmware(firmware_p, name, device, buf, size, - FW_OPT_UEVENT | FW_OPT_NOCACHE); + opt_flags, offset); module_put(THIS_MODULE); return ret; } @@ -997,7 +1018,7 @@ static void request_firmware_work_func(struct work_struct *work) fw_work = container_of(work, struct firmware_work, work);
_request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0, - fw_work->opt_flags); + fw_work->opt_flags, 0); fw_work->cont(fw, fw_work->context); put_device(fw_work->device); /* taken in request_firmware_nowait() */
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index 593f2fd39d17..facc5dff218f 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -129,7 +129,9 @@ static int i2c_slave_init_eeprom_data(struct eeprom_data *eeprom, struct i2c_cli
if (!ret) { ret = request_firmware_into_buf(&fw, eeprom_data, &client->dev, - eeprom->buffer, size); + eeprom->buffer, size, + 0, + KERNEL_PREAD_WHOLE); if (ret) return ret; release_firmware(fw); diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c index 24cd193dec55..c9490c15da68 100644 --- a/drivers/soc/qcom/mdt_loader.c +++ b/drivers/soc/qcom/mdt_loader.c @@ -246,8 +246,11 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw, } else if (phdr->p_filesz) { /* Firmware not large enough, load split-out segments */ sprintf(fw_name + fw_name_len - 3, "b%02d", i); - ret = request_firmware_into_buf(&seg_fw, fw_name, dev, - ptr, phdr->p_filesz); + ret = request_firmware_into_buf + (&seg_fw, fw_name, dev, + ptr, phdr->p_filesz, + 0, + KERNEL_PREAD_WHOLE); if (ret) { dev_err(dev, "failed to load %s\n", fw_name); break; diff --git a/include/linux/firmware.h b/include/linux/firmware.h index cb3e2c06ed8a..a53a854294e2 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -4,6 +4,7 @@
#include <linux/types.h> #include <linux/compiler.h> +#include <linux/fs.h> #include <linux/gfp.h>
#define FW_ACTION_NOHOTPLUG 0 @@ -52,7 +53,9 @@ int request_firmware_nowait( int request_firmware_direct(const struct firmware **fw, const char *name, struct device *device); int request_firmware_into_buf(const struct firmware **firmware_p, - const char *name, struct device *device, void *buf, size_t size); + const char *name, struct device *device, + void *buf, size_t size, + size_t offset, enum kernel_pread_opt opt);
void release_firmware(const struct firmware *fw); #else @@ -97,7 +100,8 @@ static inline int request_firmware_direct(const struct firmware **fw, }
static inline int request_firmware_into_buf(const struct firmware **firmware_p, - const char *name, struct device *device, void *buf, size_t size) + const char *name, struct device *device, void *buf, size_t size, + size_t offset, enum kernel_pread_opt opt) { return -EINVAL; } diff --git a/lib/test_firmware.c b/lib/test_firmware.c index 9fee2b93a8d1..af747660fe29 100644 --- a/lib/test_firmware.c +++ b/lib/test_firmware.c @@ -654,7 +654,9 @@ static int test_fw_run_batch_request(void *data) req->name, req->dev, test_buf, - TEST_FIRMWARE_BUF_SIZE); + TEST_FIRMWARE_BUF_SIZE, + 0, + KERNEL_PREAD_WHOLE); if (!req->fw) kfree(test_buf); } else {