The current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch.
However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios. More complicated flow pipelines can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites.
Enhance the pmtu testing to try testing using the internal utility, first. As a fallback, if the internal utility isn't running, then try with the ovs-vswitchd userspace tools.
Additionally, make sure that when the pyroute2 package is not available the ovs-dpctl utility will error out to properly signal an error has occurred and skip using the internal utility.
Reviewed-by: Stefano Brivio sbrivio@redhat.com Signed-off-by: Aaron Conole aconole@redhat.com --- v3: Exit with an error code from ovs-dpctl when the pyroute2 module is not available.
.../selftests/net/openvswitch/ovs-dpctl.py | 2 +- tools/testing/selftests/net/pmtu.sh | 145 +++++++++++++++--- 2 files changed, 124 insertions(+), 23 deletions(-)
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index cb3b910bbc4a..182a09975975 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -34,7 +34,7 @@ try:
except ModuleNotFoundError: print("Need to install the python pyroute2 package >= 0.6.") - sys.exit(0) + sys.exit(1)
OVS_DATAPATH_FAMILY = "ovs_datapath" diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index cfc84958025a..5175c0c83a23 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -842,25 +842,97 @@ setup_bridge() { run_cmd ${ns_a} ip link set veth_A-C master br0 }
+setup_ovs_via_internal_utility() { + type="${1}" + a_addr="${2}" + b_addr="${3}" + dport="${4}" + + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} || return 1 + + ports=$(python3 ./openvswitch/ovs-dpctl.py show) + br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs) + type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs) + veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs) + + v4_a_tun="${prefix4}.${a_r1}.1" + v4_b_tun="${prefix4}.${b_r1}.1" + + v6_a_tun="${prefix6}:${a_r1}::1" + v6_b_tun="${prefix6}:${b_r1}::1" + + if [ "${v4_a_tun}" = "${a_addr}" ]; then + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + else + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + fi +} + +setup_ovs_via_vswitchd() { + type="${1}" + b_addr="${2}" + + run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ + set interface ${type}_a type=${type} \ + options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 +} + setup_ovs_vxlan_or_geneve() { type="${1}" a_addr="${2}" b_addr="${3}" + dport="6081"
if [ "${type}" = "vxlan" ]; then + dport="4789" opts="${opts} ttl 64 dstport 4789" opts_b="local ${b_addr}" fi
- run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ - set interface ${type}_a type=${type} \ - options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 + setup_ovs_via_internal_utility "${type}" "${a_addr}" "${b_addr}" \ + "${dport}" || \ + setup_ovs_via_vswitchd "${type}" "${b_addr}" || return 1
run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1
run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
+ run_cmd ip link set ${type}_a up run_cmd ${ns_b} ip link set ${type}_b up }
@@ -880,8 +952,24 @@ setup_ovs_vxlan6() { setup_ovs_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 }
+setup_ovs_br_internal() { + run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || \ + return 1 +} + +setup_ovs_br_vswitchd() { + run_cmd ovs-vsctl add-br ovs_br0 || return 1 +} + +setup_ovs_add_if() { + ifname="${1}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 \ + "${ifname}" || \ + run_cmd ovs-vsctl add-port ovs_br0 "${ifname}" +} + setup_ovs_bridge() { - run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip + setup_ovs_br_internal || setup_ovs_br_vswitchd || return $ksft_skip run_cmd ip link set ovs_br0 up
run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C @@ -891,7 +979,7 @@ setup_ovs_bridge() { run_cmd ${ns_c} ip link set veth_C-A up run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A - run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + setup_ovs_add_if veth_A-C
# Move veth_A-R1 to init run_cmd ${ns_a} ip link set veth_A-R1 netns 1 @@ -922,6 +1010,18 @@ trace() { sleep 1 }
+cleanup_del_ovs_internal() { + # squelch the output of the del-if commands since it can be wordy + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0 >/dev/null 2>&1 +} + +cleanup_del_ovs_vswitchd() { + ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null + ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null +} + cleanup() { for pid in ${tcpdump_pids}; do kill ${pid} @@ -940,10 +1040,10 @@ cleanup() {
cleanup_all_ns
- ip link del veth_A-C 2>/dev/null - ip link del veth_A-R1 2>/dev/null - ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null - ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null + ip link del veth_A-C 2>/dev/null + ip link del veth_A-R1 2>/dev/null + cleanup_del_ovs_internal + cleanup_del_ovs_vswitchd rm -f "$tmpoutfile" }
@@ -1397,6 +1497,12 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { outer_family=${3} ll_mtu=4000
+ if [ "${type}" = "vxlan" ]; then + tun_a="vxlan_sys_4789" + elif [ "${type}" = "geneve" ]; then + tun_a="genev_sys_6081" + fi + if [ ${outer_family} -eq 4 ]; then setup namespaces routing ovs_bridge ovs_${type}4 || return $ksft_skip # IPv4 header UDP header VXLAN/GENEVE header Ethernet header @@ -1407,17 +1513,11 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) fi
- if [ "${type}" = "vxlan" ]; then - tun_a="vxlan_sys_4789" - elif [ "${type}" = "geneve" ]; then - tun_a="genev_sys_6081" - fi - - trace "" "${tun_a}" "${ns_b}" ${type}_b \ - "" veth_A-R1 "${ns_r1}" veth_R1-A \ - "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ - "" ovs_br0 "" veth-A-C \ - "${ns_c}" veth_C-A + trace "" ${type}_a "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A_C \ + "${ns_c}" veth_C-A "" "${tun_a}"
if [ ${family} -eq 4 ]; then ping=ping @@ -1436,8 +1536,9 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { mtu "${ns_b}" veth_B-R1 ${ll_mtu} mtu "${ns_r1}" veth_R1-B ${ll_mtu}
- mtu "" ${tun_a} $((${ll_mtu} + 1000)) - mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + mtu "" ${tun_a} $((${ll_mtu} + 1000)) 2>/dev/null || \ + mtu "" ${type}_a $((${ll_mtu} + 1000)) 2>/dev/null + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1