Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh declare -- sip="192.0.2.1" declare -- tip="192.0.2.2" declare -- vid="10"
Per-port ARP suppression - VLAN 10 ---------------------------------- TEST: arping [ OK ] TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148 Tests failed: 0
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../net/test_bridge_neigh_suppress.sh | 333 +++++++++--------- 1 file changed, 163 insertions(+), 170 deletions(-)
diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh index d80f2cd87614..cd8629b476e2 100755 --- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh +++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh @@ -45,9 +45,8 @@ # | sw1 | | sw2 | # +------------------------------------+ +------------------------------------+
+source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
# All tests in this script. Can be overridden with -t option. TESTS=" @@ -140,9 +139,6 @@ setup_topo_ns() { local ns=$1; shift
- ip netns add $ns - ip -n $ns link set dev lo up - ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1 ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0 @@ -153,21 +149,22 @@ setup_topo() { local ns
- for ns in h1 h2 sw1 sw2; do + setup_ns h1 h2 sw1 sw2 + for ns in $h1 $h2 $sw1 $sw2; do setup_topo_ns $ns done
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h1 name eth0 - ip link set dev veth1 netns sw1 name swp1 + ip link set dev veth0 netns $h1 name eth0 + ip link set dev veth1 netns $sw1 name swp1
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns sw1 name veth0 - ip link set dev veth1 netns sw2 name veth0 + ip link set dev veth0 netns $sw1 name veth0 + ip link set dev veth1 netns $sw2 name veth0
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h2 name eth0 - ip link set dev veth1 netns sw2 name swp1 + ip link set dev veth0 netns $h2 name eth0 + ip link set dev veth1 netns $sw2 name swp1 }
setup_host_common() @@ -291,11 +288,7 @@ setup()
cleanup() { - local ns - - for ns in h1 h2 sw1 sw2; do - ip netns del $ns &> /dev/null - done + cleanup_ns $h1 $h2 $sw1 $sw2 }
################################################################################ @@ -312,80 +305,80 @@ neigh_suppress_arp_common() echo "Per-port ARP suppression - VLAN $vid" echo "----------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
# Initial state - check that ARP requests are not suppressed and that # ARP replies are received. - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression"
# Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression"
# Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
# Install a neighbor on the matching SVI interface and check that ARP # requests are suppressed. - run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are suppressed # and that ARP replies are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up"
# Disable neighbor suppression and check that ARP requests are no # longer suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are not # suppressed and that ARP replies are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 1 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "ARP suppression" }
@@ -409,86 +402,86 @@ neigh_suppress_ns_common() local saddr=$1; shift local daddr=$1; shift local maddr=$1; shift - local h2_mac + local $h2_mac
echo echo "Per-port NS suppression - VLAN $vid" echo "---------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
# Initial state - check that NS messages are not suppressed and that ND # messages are received. - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression"
# Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression"
# Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
# Install a neighbor on the matching SVI interface and check that NS # messages are suppressed. - run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are suppressed # and that ND messages are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up"
# Disable neighbor suppression and check that NS messages are no longer # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are not # suppressed and that ND messages are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 2 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "NS suppression" }
@@ -517,125 +510,125 @@ neigh_vlan_suppress_arp() local sip2=192.0.2.17 local tip1=192.0.2.2 local tip2=192.0.2.18 - local h2_mac1 - local h2_mac2 + local $h2_mac1 + local $h2_mac2
echo echo "Per-{Port, VLAN} ARP suppression" echo "--------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that ARP # requests are not suppressed and that ARP replies are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" log_test $? 0 ""neigh_vlan_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this # VLAN ARP requests are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that ARP requests # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs ARP requests are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" log_test $? 0 ""neigh_vlan_suppress" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)" }
@@ -648,125 +641,125 @@ neigh_vlan_suppress_ns() local daddr1=2001:db8:1::2 local daddr2=2001:db8:2::2 local maddr=ff02::1:ff00:2 - local h2_mac1 - local h2_mac2 + local $h2_mac1 + local $h2_mac2
echo echo "Per-{Port, VLAN} NS suppression" echo "-------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that NS # messages are not suppressed and that ND messages are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" log_test $? 0 ""neigh_vlan_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this # VLAN NS messages are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that NS messages # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs NS messages are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" log_test $? 0 ""neigh_vlan_suppress" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)" }