Here is the test result after conversion.
]# ./vrf_route_leaking.sh
########################################################################### IPv4 (sym route): VRF ICMP ttl error route lookup ping ###########################################################################
TEST: Basic IPv4 connectivity [ OK ] TEST: Ping received ICMP ttl exceeded [ OK ]
...
TEST: Basic IPv6 connectivity [ OK ] TEST: Traceroute6 reports a hop on r1 [ OK ]
Tests passed: 18 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/vrf_route_leaking.sh | 201 +++++++++--------- 1 file changed, 96 insertions(+), 105 deletions(-)
diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh index dedc52562b4f..2da32f4c479b 100755 --- a/tools/testing/selftests/net/vrf_route_leaking.sh +++ b/tools/testing/selftests/net/vrf_route_leaking.sh @@ -58,6 +58,7 @@ # to send an ICMP error back to the source when the ttl of a packet reaches 1 # while it is forwarded between different vrfs.
+source lib.sh VERBOSE=0 PAUSE_ON_FAIL=no DEFAULT_TTYPE=sym @@ -171,11 +172,7 @@ run_cmd_grep()
cleanup() { - local ns - - for ns in h1 h2 r1 r2; do - ip netns del $ns 2>/dev/null - done + cleanup_ns $h1 $h2 $r1 $r2 }
setup_vrf() @@ -212,72 +209,69 @@ setup_sym()
# # create nodes as namespaces - # - for ns in h1 h2 r1; do - ip netns add $ns - ip -netns $ns link set lo up - - case "${ns}" in - h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 - ;; - r1) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 - esac + setup_ns h1 h2 r1 + for ns in $h1 $h2 $r1; do + if echo $ns | grep -q h[12]-; then + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 + else + ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 + fi done
# # create interconnects # - ip -netns h1 link add eth0 type veth peer name r1h1 - ip -netns h1 link set r1h1 netns r1 name eth0 up + ip -netns $h1 link add eth0 type veth peer name r1h1 + ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2 - ip -netns h2 link set r1h2 netns r1 name eth1 up + ip -netns $h2 link add eth0 type veth peer name r1h2 + ip -netns $h2 link set r1h2 netns $r1 name eth1 up
# # h1 # - ip -netns h1 addr add dev eth0 ${H1_N1_IP}/24 - ip -netns h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad - ip -netns h1 link set eth0 up + ip -netns $h1 addr add dev eth0 ${H1_N1_IP}/24 + ip -netns $h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad + ip -netns $h1 link set eth0 up
# h1 to h2 via r1 - ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0 - ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0 + ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0 + ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0
# # h2 # - ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24 - ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad - ip -netns h2 link set eth0 up + ip -netns $h2 addr add dev eth0 ${H2_N2_IP}/24 + ip -netns $h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad + ip -netns $h2 link set eth0 up
# h2 to h1 via r1 - ip -netns h2 route add default via ${R1_N2_IP} dev eth0 - ip -netns h2 -6 route add default via ${R1_N2_IP6} dev eth0 + ip -netns $h2 route add default via ${R1_N2_IP} dev eth0 + ip -netns $h2 -6 route add default via ${R1_N2_IP6} dev eth0
# # r1 # - setup_vrf r1 - create_vrf r1 blue 1101 - create_vrf r1 red 1102 - ip -netns r1 link set mtu 1400 dev eth1 - ip -netns r1 link set eth0 vrf blue up - ip -netns r1 link set eth1 vrf red up - ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24 - ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad - ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24 - ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad + setup_vrf $r1 + create_vrf $r1 blue 1101 + create_vrf $r1 red 1102 + ip -netns $r1 link set mtu 1400 dev eth1 + ip -netns $r1 link set eth0 vrf blue up + ip -netns $r1 link set eth1 vrf red up + ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24 + ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad + ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24 + ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red - ip -netns r1 route add vrf blue ${H2_N2} dev red - ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red + ip -netns $r1 route add vrf blue ${H2_N2} dev red + ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# Route leak from red to blue - ip -netns r1 route add vrf red ${H1_N1} dev blue - ip -netns r1 -6 route add vrf red ${H1_N1_6} dev blue + ip -netns $r1 route add vrf red ${H1_N1} dev blue + ip -netns $r1 -6 route add vrf red ${H1_N1_6} dev blue
# Wait for ip config to settle @@ -293,90 +287,87 @@ setup_asym()
# # create nodes as namespaces - # - for ns in h1 h2 r1 r2; do - ip netns add $ns - ip -netns $ns link set lo up - - case "${ns}" in - h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 - ;; - r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 - esac + setup_ns h1 h2 r1 r2 + for ns in $h1 $h2 $r1 $r2; do + if echo $ns | grep -q h[12]-; then + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 + else + ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 + fi done
# # create interconnects # - ip -netns h1 link add eth0 type veth peer name r1h1 - ip -netns h1 link set r1h1 netns r1 name eth0 up + ip -netns $h1 link add eth0 type veth peer name r1h1 + ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h1 link add eth1 type veth peer name r2h1 - ip -netns h1 link set r2h1 netns r2 name eth0 up + ip -netns $h1 link add eth1 type veth peer name r2h1 + ip -netns $h1 link set r2h1 netns $r2 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2 - ip -netns h2 link set r1h2 netns r1 name eth1 up + ip -netns $h2 link add eth0 type veth peer name r1h2 + ip -netns $h2 link set r1h2 netns $r1 name eth1 up
- ip -netns h2 link add eth1 type veth peer name r2h2 - ip -netns h2 link set r2h2 netns r2 name eth1 up + ip -netns $h2 link add eth1 type veth peer name r2h2 + ip -netns $h2 link set r2h2 netns $r2 name eth1 up
# # h1 # - ip -netns h1 link add br0 type bridge - ip -netns h1 link set br0 up - ip -netns h1 addr add dev br0 ${H1_N1_IP}/24 - ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad - ip -netns h1 link set eth0 master br0 up - ip -netns h1 link set eth1 master br0 up + ip -netns $h1 link add br0 type bridge + ip -netns $h1 link set br0 up + ip -netns $h1 addr add dev br0 ${H1_N1_IP}/24 + ip -netns $h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad + ip -netns $h1 link set eth0 master br0 up + ip -netns $h1 link set eth1 master br0 up
# h1 to h2 via r1 - ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev br0 - ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0 + ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev br0 + ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
# # h2 # - ip -netns h2 link add br0 type bridge - ip -netns h2 link set br0 up - ip -netns h2 addr add dev br0 ${H2_N2_IP}/24 - ip -netns h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad - ip -netns h2 link set eth0 master br0 up - ip -netns h2 link set eth1 master br0 up + ip -netns $h2 link add br0 type bridge + ip -netns $h2 link set br0 up + ip -netns $h2 addr add dev br0 ${H2_N2_IP}/24 + ip -netns $h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad + ip -netns $h2 link set eth0 master br0 up + ip -netns $h2 link set eth1 master br0 up
# h2 to h1 via r2 - ip -netns h2 route add default via ${R2_N2_IP} dev br0 - ip -netns h2 -6 route add default via ${R2_N2_IP6} dev br0 + ip -netns $h2 route add default via ${R2_N2_IP} dev br0 + ip -netns $h2 -6 route add default via ${R2_N2_IP6} dev br0
# # r1 # - setup_vrf r1 - create_vrf r1 blue 1101 - create_vrf r1 red 1102 - ip -netns r1 link set mtu 1400 dev eth1 - ip -netns r1 link set eth0 vrf blue up - ip -netns r1 link set eth1 vrf red up - ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24 - ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad - ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24 - ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad + setup_vrf $r1 + create_vrf $r1 blue 1101 + create_vrf $r1 red 1102 + ip -netns $r1 link set mtu 1400 dev eth1 + ip -netns $r1 link set eth0 vrf blue up + ip -netns $r1 link set eth1 vrf red up + ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24 + ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad + ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24 + ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red - ip -netns r1 route add vrf blue ${H2_N2} dev red - ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red + ip -netns $r1 route add vrf blue ${H2_N2} dev red + ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# No route leak from red to blue
# # r2 # - ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24 - ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad - ip -netns r2 addr add dev eth1 ${R2_N2_IP}/24 - ip -netns r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad + ip -netns $r2 addr add dev eth0 ${R2_N1_IP}/24 + ip -netns $r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad + ip -netns $r2 addr add dev eth1 ${R2_N2_IP}/24 + ip -netns $r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
# Wait for ip config to settle sleep 2 @@ -384,14 +375,14 @@ setup_asym()
check_connectivity() { - ip netns exec h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1 + ip netns exec $h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1 log_test $? 0 "Basic IPv4 connectivity" return $? }
check_connectivity6() { - ip netns exec h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1 + ip netns exec $h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1 log_test $? 0 "Basic IPv6 connectivity" return $? } @@ -426,7 +417,7 @@ ipv4_traceroute()
check_connectivity || return
- run_cmd_grep "${R1_N1_IP}" ip netns exec h1 traceroute ${H2_N2_IP} + run_cmd_grep "${R1_N1_IP}" ip netns exec $h1 traceroute ${H2_N2_IP} log_test $? 0 "Traceroute reports a hop on r1" }
@@ -449,7 +440,7 @@ ipv6_traceroute()
check_connectivity6 || return
- run_cmd_grep "${R1_N1_IP6}" ip netns exec h1 traceroute6 ${H2_N2_IP6} + run_cmd_grep "${R1_N1_IP6}" ip netns exec $h1 traceroute6 ${H2_N2_IP6} log_test $? 0 "Traceroute6 reports a hop on r1" }
@@ -470,7 +461,7 @@ ipv4_ping_ttl()
check_connectivity || return
- run_cmd_grep "Time to live exceeded" ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP} + run_cmd_grep "Time to live exceeded" ip netns exec $h1 ping -t1 -c1 -W2 ${H2_N2_IP} log_test $? 0 "Ping received ICMP ttl exceeded" }
@@ -491,7 +482,7 @@ ipv4_ping_frag()
check_connectivity || return
- run_cmd_grep "Frag needed" ip netns exec h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP} + run_cmd_grep "Frag needed" ip netns exec $h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP} log_test $? 0 "Ping received ICMP Frag needed" }
@@ -512,7 +503,7 @@ ipv6_ping_ttl()
check_connectivity6 || return
- run_cmd_grep "Time exceeded: Hop limit" ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6} + run_cmd_grep "Time exceeded: Hop limit" ip netns exec $h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6} log_test $? 0 "Ping received ICMP Hop limit" }
@@ -533,7 +524,7 @@ ipv6_ping_frag()
check_connectivity6 || return
- run_cmd_grep "Packet too big" ip netns exec h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6} + run_cmd_grep "Packet too big" ip netns exec $h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6} log_test $? 0 "Ping received ICMP Packet too big" }