On Sun, Aug 28, 2022 at 02:00:29PM +0200, netdev@kapio-technology.com wrote:
On 2022-08-27 20:21, Ido Schimmel wrote:
On Fri, Aug 26, 2022 at 01:45:38PM +0200, Hans Schultz wrote:
+locked_port_mab() +{
- RET=0
- check_locked_port_support || return 0
- ping_do $h1 192.0.2.2
- check_err $? "MAB: Ping did not work before locking port"
- bridge link set dev $swp1 locked on
- bridge link set dev $swp1 learning on
"locked on learning on" is counter intuitive and IMO very much a misconfiguration that we should have disallowed when the "locked" option was introduced. It is my understanding that the only reason we are even talking about it is because mv88e6xxx needs it for MAB for some reason.
As the way mv88e6xxx implements "learning off" is to remove port association for ingress packets on a port, but that breaks many other things such as refreshing ATU entries and violation interrupts, so it is needed and the question is then what is the worst to have 'learning on' on a locked port or to have the locked port enabling learning in the driver silently?
Opinions seem to differ. Note that even on locked ports without MAB, port association on ingress is still needed in future as I have a dynamic ATU patch set coming, that uses age out violation and hardware refreshing to let the hardware keep the dynamic entries as long as the authorized station is sending, but will age the entry out if the station keeps silent for the ageing time. But that patch set is dependent on this patch set, and I don't think I can send it before this is accepted...
Can you explain how you envision user space to work once everything is merged? I want to make sure we have the full picture before more stuff is merged. From what you describe, I expect the following:
1. Create topology, assuming two unauthorized ports:
# ip link add name br0 type bridge no_linklocal_learn 1 (*) # ip link set dev swp1 master br0 # ip link set dev swp2 master br0 # bridge link set dev swp1 learning on locked on # bridge link set dev swp2 learning on locked on # ip link set dev swp1 up # ip link set dev swp2 up # ip link set dev br0 up
2. Assuming h1 behind swp1 was authorized using 802.1X:
# bridge fdb replace $H1_MAC dev swp1 master dynamic
3. Assuming 802.1X authentication failed for h2 behind swp2, enable MAB:
# bridge link set dev swp2 mab on
4. Assuming $H2_MAC is in our allow list:
# bridge fdb replace $H2_MAC dev swp2 master dynamic
Learning is on in order to refresh the dynamic entries that user space installed.
(*) Need to add support for this option in iproute2. Already exposed over netlink (see 'IFLA_BR_MULTI_BOOLOPT').