When running fib_nexthop_multiprefix test I saw all IPv6 test failed. e.g.
]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium Searching for: 2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- tools/testing/selftests/net/fib_nexthop_multiprefix.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh index 51df5e305855..b52d59547fc5 100755 --- a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh +++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh @@ -209,12 +209,12 @@ validate_v6_exception() echo "Route get" ip -netns h0 -6 ro get ${dst} echo "Searching for:" - echo " ${dst} from :: via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" + echo " ${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" echo fi
ip -netns h0 -6 ro get ${dst} | \ - grep -q "${dst} from :: via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" + grep -q "${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" rc=$?
log_test $rc 0 "IPv6: host 0 to host ${i}, mtu ${mtu}"