Hi Eric,
On 11/27/23 16:10, Eric Auger wrote:
Hi Shaoqin,
On 11/23/23 07:37, Shaoqin Huang wrote:
Introduce pmu_event_filter_test for arm64 platforms. The test configures PMUv3 for a vCPU, and sets different pmu event filter for the vCPU, and
filters
check if the guest can use those events which user allow and can't use those events which use deny.
This test refactor the create_vpmu_vm() and make it a wrapper for __create_vpmu_vm(), which can let we do some extra init before
which can let we do -> which allows some extra init code.
Copy that.
KVM_ARM_VCPU_PMU_V3_INIT.
This test choose the branches_retired and the instructions_retired event, and let guest use the two events in pmu. And check if the result
Are you sure those events are supported?
is expected.
Signed-off-by: Shaoqin Huang shahuang@redhat.com
tools/testing/selftests/kvm/Makefile | 1 + .../kvm/aarch64/pmu_event_filter_test.c | 227 ++++++++++++++++++ .../selftests/kvm/include/aarch64/vpmu.h | 4 + .../testing/selftests/kvm/lib/aarch64/vpmu.c | 14 +- 4 files changed, 244 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/kvm/aarch64/pmu_event_filter_test.c
diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index b60852c222ac..5f126e1a1dbf 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -155,6 +155,7 @@ TEST_GEN_PROGS_aarch64 += aarch64/arch_timer TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions TEST_GEN_PROGS_aarch64 += aarch64/hypercalls TEST_GEN_PROGS_aarch64 += aarch64/page_fault_test +TEST_GEN_PROGS_aarch64 += aarch64/pmu_event_filter_test TEST_GEN_PROGS_aarch64 += aarch64/psci_test TEST_GEN_PROGS_aarch64 += aarch64/set_id_regs TEST_GEN_PROGS_aarch64 += aarch64/smccc_filter diff --git a/tools/testing/selftests/kvm/aarch64/pmu_event_filter_test.c b/tools/testing/selftests/kvm/aarch64/pmu_event_filter_test.c new file mode 100644 index 000000000000..a876f5c2033b --- /dev/null +++ b/tools/testing/selftests/kvm/aarch64/pmu_event_filter_test.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- pmu_event_filter_test - Test user limit pmu event for guest.
- Copyright (c) 2023 Red Hat, Inc.
- This test checks if the guest only see the limited pmu event that userspace
sees
- sets, if the gust can use those events which user allow, and if the guest
s/gust/guest
Thanks, will correct it.
- can't use those events which user deny.
- It also checks set invalid filter return the expected error.
it also checks that setting invalid filter ranges ...
- This test runs only when KVM_CAP_ARM_PMU_V3 is supported on the host.
- */
+#include <kvm_util.h> +#include <processor.h> +#include <vgic.h> +#include <vpmu.h> +#include <test_util.h> +#include <perf/arm_pmuv3.h>
+struct {
- uint64_t branches_retired;
- uint64_t instructions_retired;
+} pmc_results;
+static struct vpmu_vm *vpmu_vm;
+#define FILTER_NR 10
+struct test_desc {
- const char *name;
- void (*check_result)(void);
- struct kvm_pmu_event_filter filter[FILTER_NR];
+};
+#define __DEFINE_FILTER(base, num, act) \
- ((struct kvm_pmu_event_filter) { \
.base_event = base, \
.nevents = num, \
.action = act, \
- })
+#define DEFINE_FILTER(base, act) __DEFINE_FILTER(base, 1, act)
+#define EMPTY_FILTER { 0 }
+#define SW_INCR 0x0 +#define INST_RETIRED 0x8 +#define BR_RETIERD 0x21
looks like a typo
It's a typo error. Fixed it.
+#define NUM_BRANCHES 10
+static void run_and_measure_loop(void) +{
- asm volatile(
" mov x10, %[loop]\n"
"1: sub x10, x10, #1\n"
" cmp x10, #0x0\n"
" b.gt 1b\n"
:
: [loop] "r" (NUM_BRANCHES)
: "x10", "cc");
+}
+static void guest_code(void) +{
- uint64_t pmcr = read_sysreg(pmcr_el0);
- pmu_disable_reset();
- write_pmevtypern(0, BR_RETIERD);
- write_pmevtypern(1, INST_RETIRED);
- enable_counter(0);
- enable_counter(1);
- write_sysreg(pmcr | ARMV8_PMU_PMCR_E, pmcr_el0);
- run_and_measure_loop();
- write_sysreg(pmcr, pmcr_el0);
- pmc_results.branches_retired = read_sysreg(pmevcntr0_el0);
- pmc_results.instructions_retired = read_sysreg(pmevcntr1_el0);
- GUEST_DONE();
another direct way to see if the guest can use those filters is to read the PMCEIDx that indicates whether an event is supported.
Yes. That's the easist way. Why I do this is because I follow the x86 design.
+}
+static void pmu_event_filter_init(struct vpmu_vm *vm, void *arg) +{
- struct kvm_device_attr attr = {
.group = KVM_ARM_VCPU_PMU_V3_CTRL,
.attr = KVM_ARM_VCPU_PMU_V3_FILTER,
- };
- struct kvm_pmu_event_filter *filter = (struct kvm_pmu_event_filter *)arg;
- while (filter && filter->nevents != 0) {
attr.addr = (uint64_t)filter;
vcpu_ioctl(vm->vcpu, KVM_SET_DEVICE_ATTR, &attr);
filter++;
- }
+}
+static void create_vpmu_vm_with_filter(void *guest_code,
struct kvm_pmu_event_filter *filter)
+{
- vpmu_vm = __create_vpmu_vm(guest_code, pmu_event_filter_init, filter);
+}
+static void run_vcpu(struct kvm_vcpu *vcpu) +{
- struct ucall uc;
- while (1) {
vcpu_run(vcpu);
switch (get_ucall(vcpu, &uc)) {
case UCALL_DONE:
return;
default:
TEST_FAIL("Unknown ucall %lu", uc.cmd);
}
- }
+}
+static void check_pmc_counting(void) +{
- uint64_t br = pmc_results.branches_retired;
- uint64_t ir = pmc_results.instructions_retired;
- TEST_ASSERT(br && br == NUM_BRANCHES, "Branch instructions retired = "
"%lu (expected %u)", br, NUM_BRANCHES);
- TEST_ASSERT(ir, "Instructions retired = %lu (expected > 0)", ir);
+}
+static void check_pmc_not_counting(void) +{
- uint64_t br = pmc_results.branches_retired;
- uint64_t ir = pmc_results.instructions_retired;
- TEST_ASSERT(!br, "Branch instructions retired = %lu (expected 0)", br);
- TEST_ASSERT(!ir, "Instructions retired = %lu (expected 0)", ir);
+}
+static void run_vcpu_and_sync_pmc_results(void) +{
- memset(&pmc_results, 0, sizeof(pmc_results));
- sync_global_to_guest(vpmu_vm->vm, pmc_results);
- run_vcpu(vpmu_vm->vcpu);
- sync_global_from_guest(vpmu_vm->vm, pmc_results);
+}
+static void run_test(struct test_desc *t) +{
- pr_debug("Test: %s\n", t->name);
- create_vpmu_vm_with_filter(guest_code, t->filter);
- run_vcpu_and_sync_pmc_results();
- t->check_result();
- destroy_vpmu_vm(vpmu_vm);
+}
+static struct test_desc tests[] = {
- {"without_filter", check_pmc_counting, { EMPTY_FILTER }},
- {"member_allow_filter", check_pmc_counting,
{DEFINE_FILTER(SW_INCR, 0), DEFINE_FILTER(INST_RETIRED, 0),
DEFINE_FILTER(BR_RETIERD, 0), EMPTY_FILTER}},
- {"member_deny_filter", check_pmc_not_counting,
{DEFINE_FILTER(SW_INCR, 1), DEFINE_FILTER(INST_RETIRED, 1),
DEFINE_FILTER(BR_RETIERD, 1), EMPTY_FILTER}},
- {"not_member_deny_filter", check_pmc_counting,
{DEFINE_FILTER(SW_INCR, 1), EMPTY_FILTER}},
- {"not_member_allow_filter", check_pmc_not_counting,
{DEFINE_FILTER(SW_INCR, 0), EMPTY_FILTER}},
- { 0 }
+};
+static void for_each_test(void) +{
- struct test_desc *t;
- for (t = &tests[0]; t->name; t++)
run_test(t);
+}
+static void set_invalid_filter(struct vpmu_vm *vm, void *arg) +{
- struct kvm_pmu_event_filter invalid;
- struct kvm_device_attr attr = {
.group = KVM_ARM_VCPU_PMU_V3_CTRL,
.attr = KVM_ARM_VCPU_PMU_V3_FILTER,
.addr = (uint64_t)&invalid,
- };
- int ret = 0;
- /* The max event number is (1 << 16), set a range large than it. */
- invalid = __DEFINE_FILTER(BIT(15), BIT(15)+1, 0);
- ret = __vcpu_ioctl(vm->vcpu, KVM_SET_DEVICE_ATTR, &attr);
- TEST_ASSERT(ret && errno == EINVAL, "Set Invalid filter range "
"ret = %d, errno = %d (expected ret = -1, errno = EINVAL)",
ret, errno);
- ret = 0;
- /* Set the Invalid action. */
- invalid = __DEFINE_FILTER(0, 1, 3);
- ret = __vcpu_ioctl(vm->vcpu, KVM_SET_DEVICE_ATTR, &attr);
- TEST_ASSERT(ret && errno == EINVAL, "Set Invalid filter action "
"ret = %d, errno = %d (expected ret = -1, errno = EINVAL)",
ret, errno);
+}
+static void test_invalid_filter(void) +{
- vpmu_vm = __create_vpmu_vm(guest_code, set_invalid_filter, NULL);
- destroy_vpmu_vm(vpmu_vm);
+}
+int main(void) +{
- TEST_REQUIRE(kvm_has_cap(KVM_CAP_ARM_PMU_V3));
- for_each_test();
- test_invalid_filter();
I would introduce test_invalid_filter in a separate patch
Ok. I can split it into two.
Thanks, Shaoqin
+} diff --git a/tools/testing/selftests/kvm/include/aarch64/vpmu.h b/tools/testing/selftests/kvm/include/aarch64/vpmu.h index e0cc1ca1c4b7..db97bfb07996 100644 --- a/tools/testing/selftests/kvm/include/aarch64/vpmu.h +++ b/tools/testing/selftests/kvm/include/aarch64/vpmu.h @@ -18,6 +18,10 @@ struct vpmu_vm { int gic_fd; }; +struct vpmu_vm *__create_vpmu_vm(void *guest_code,
void (*init_pmu)(struct vpmu_vm *vm, void *arg),
void *arg);
- struct vpmu_vm *create_vpmu_vm(void *guest_code);
void destroy_vpmu_vm(struct vpmu_vm *vpmu_vm); diff --git a/tools/testing/selftests/kvm/lib/aarch64/vpmu.c b/tools/testing/selftests/kvm/lib/aarch64/vpmu.c index b3de8fdc555e..76ea03d607f1 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/vpmu.c +++ b/tools/testing/selftests/kvm/lib/aarch64/vpmu.c @@ -7,8 +7,9 @@ #include <vpmu.h> #include <perf/arm_pmuv3.h> -/* Create a VM that has one vCPU with PMUv3 configured. */ -struct vpmu_vm *create_vpmu_vm(void *guest_code) +struct vpmu_vm *__create_vpmu_vm(void *guest_code,
void (*init_pmu)(struct vpmu_vm *vm, void *arg),
{ struct kvm_vcpu_init init; uint8_t pmuver;void *arg)
@@ -50,12 +51,21 @@ struct vpmu_vm *create_vpmu_vm(void *guest_code) "Unexpected PMUVER (0x%x) on the vCPU with PMUv3", pmuver); /* Initialize vPMU */
- if (init_pmu)
init_pmu(vpmu_vm, arg);
- vcpu_ioctl(vpmu_vm->vcpu, KVM_SET_DEVICE_ATTR, &irq_attr); vcpu_ioctl(vpmu_vm->vcpu, KVM_SET_DEVICE_ATTR, &init_attr);
return vpmu_vm; } +/* Create a VM that has one vCPU with PMUv3 configured. */ +struct vpmu_vm *create_vpmu_vm(void *guest_code) +{
- return __create_vpmu_vm(guest_code, NULL, NULL);
+}
- void destroy_vpmu_vm(struct vpmu_vm *vpmu_vm) { close(vpmu_vm->gic_fd);
Thanks
Eric