Add test cases for hash threshold (multipath) nexthop groups with invalid neighbors. Check that a nexthop with invalid neighbor is not selected when there is another nexthop with a valid neighbor. Check that there is no crash when there is no nexthop with a valid neighbor.
The first test fails before the previous commit in this series.
Signed-off-by: Benjamin Poirier bpoirier@nvidia.com --- tools/testing/selftests/net/fib_nexthops.sh | 129 ++++++++++++++++++++ 1 file changed, 129 insertions(+)
diff --git a/tools/testing/selftests/net/fib_nexthops.sh b/tools/testing/selftests/net/fib_nexthops.sh index 0f5e88c8f4ff..54ec2b7b7b8c 100755 --- a/tools/testing/selftests/net/fib_nexthops.sh +++ b/tools/testing/selftests/net/fib_nexthops.sh @@ -29,6 +29,7 @@ IPV4_TESTS=" ipv4_large_res_grp ipv4_compat_mode ipv4_fdb_grp_fcnal + ipv4_mpath_select ipv4_torture ipv4_res_torture " @@ -42,6 +43,7 @@ IPV6_TESTS=" ipv6_large_res_grp ipv6_compat_mode ipv6_fdb_grp_fcnal + ipv6_mpath_select ipv6_torture ipv6_res_torture " @@ -370,6 +372,27 @@ check_large_res_grp() log_test $? 0 "Dump large (x$buckets) nexthop buckets" }
+get_route_dev() +{ + local pfx="$1" + local out + + if out=$($IP -j route get "$pfx" | jq -re ".[0].dev"); then + echo "$out" + fi +} + +check_route_dev() +{ + local pfx="$1" + local expected="$2" + local out + + out=$(get_route_dev "$pfx") + + check_output "$out" "$expected" +} + start_ip_monitor() { local mtype=$1 @@ -575,6 +598,112 @@ ipv4_fdb_grp_fcnal() $IP link del dev vx10 }
+ipv4_mpath_select() +{ + local rc dev match h addr + + echo + echo "IPv4 multipath selection" + echo "------------------------" + if [ ! -x "$(command -v jq)" ]; then + echo "SKIP: Could not run test; need jq tool" + return $ksft_skip + fi + + # Use status of existing neighbor entry when determining nexthop for + # multipath routes. + local -A gws + gws=([veth1]=172.16.1.2 [veth3]=172.16.2.2) + local -A other_dev + other_dev=([veth1]=veth3 [veth3]=veth1) + + run_cmd "$IP nexthop add id 1 via ${gws["veth1"]} dev veth1" + run_cmd "$IP nexthop add id 2 via ${gws["veth3"]} dev veth3" + run_cmd "$IP nexthop add id 1001 group 1/2" + run_cmd "$IP ro add 172.16.101.0/24 nhid 1001" + rc=0 + for dev in veth1 veth3; do + match=0 + for h in {1..254}; do + addr="172.16.101.$h" + if [ "$(get_route_dev "$addr")" = "$dev" ]; then + match=1 + break + fi + done + if (( match == 0 )); then + echo "SKIP: Did not find a route using device $dev" + return $ksft_skip + fi + run_cmd "$IP neigh add ${gws[$dev]} dev $dev nud failed" + if ! check_route_dev "$addr" "${other_dev[$dev]}"; then + rc=1 + break + fi + run_cmd "$IP neigh del ${gws[$dev]} dev $dev" + done + log_test $rc 0 "Use valid neighbor during multipath selection" + + run_cmd "$IP neigh add 172.16.1.2 dev veth1 nud incomplete" + run_cmd "$IP neigh add 172.16.2.2 dev veth3 nud incomplete" + run_cmd "$IP route get 172.16.101.1" + # if we did not crash, success + log_test $rc 0 "Multipath selection with no valid neighbor" +} + +ipv6_mpath_select() +{ + local rc dev match h addr + + echo + echo "IPv6 multipath selection" + echo "------------------------" + if [ ! -x "$(command -v jq)" ]; then + echo "SKIP: Could not run test; need jq tool" + return $ksft_skip + fi + + # Use status of existing neighbor entry when determining nexthop for + # multipath routes. + local -A gws + gws=([veth1]=2001:db8:91::2 [veth3]=2001:db8:92::2) + local -A other_dev + other_dev=([veth1]=veth3 [veth3]=veth1) + + run_cmd "$IP nexthop add id 1 via ${gws["veth1"]} dev veth1" + run_cmd "$IP nexthop add id 2 via ${gws["veth3"]} dev veth3" + run_cmd "$IP nexthop add id 1001 group 1/2" + run_cmd "$IP ro add 2001:db8:101::/64 nhid 1001" + rc=0 + for dev in veth1 veth3; do + match=0 + for h in {1..65535}; do + addr=$(printf "2001:db8:101::%x" $h) + if [ "$(get_route_dev "$addr")" = "$dev" ]; then + match=1 + break + fi + done + if (( match == 0 )); then + echo "SKIP: Did not find a route using device $dev" + return $ksft_skip + fi + run_cmd "$IP neigh add ${gws[$dev]} dev $dev nud failed" + if ! check_route_dev "$addr" "${other_dev[$dev]}"; then + rc=1 + break + fi + run_cmd "$IP neigh del ${gws[$dev]} dev $dev" + done + log_test $rc 0 "Use valid neighbor during multipath selection" + + run_cmd "$IP neigh add 2001:db8:91::2 dev veth1 nud incomplete" + run_cmd "$IP neigh add 2001:db8:92::2 dev veth3 nud incomplete" + run_cmd "$IP route get 2001:db8:101::1" + # if we did not crash, success + log_test $rc 0 "Multipath selection with no valid neighbor" +} + ################################################################################ # basic operations (add, delete, replace) on nexthops and nexthop groups #