Tests are mostly copied from tcp_md5 with minor changes.
It covers VRF support but only based on binding multiple servers: not multiple keys bound to different interfaces.
Also add a specific -t tcp_authopt to run only these tests specifically.
Signed-off-by: Leonard Crestez cdleonard@gmail.com --- tools/testing/selftests/net/fcnal-test.sh | 249 ++++++++++++++++++++++ 1 file changed, 249 insertions(+)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 3313566ce906..d7afd9f40848 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -800,10 +800,252 @@ ipv4_ping() }
################################################################################ # IPv4 TCP
+# +# TCP Authentication Option Tests +# + +# try to enable tcp_authopt sysctl +enable_tcp_authopt() +{ + if [[ -e /proc/sys/net/ipv4/tcp_authopt ]]; then + sysctl -w net.ipv4.tcp_authopt=1 + fi +} + +# check if tcp_authopt is compiled with a client-side bind test +has_tcp_authopt() +{ + run_cmd_nsb nettest -b -A ${MD5_PW} -r ${NSA_IP} +} + +ipv4_tcp_authopt_novrf() +{ + enable_tcp_authopt + if ! has_tcp_authopt; then + echo "TCP-AO appears to be missing, skip" + return 0 + fi + + log_start + run_cmd nettest -s -A ${MD5_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: Single address config" + + log_start + run_cmd nettest -s & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 2 "AO: Server no config, client uses password" + + log_start + run_cmd nettest -s -A ${MD5_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_WRONG_PW} + log_test $? 2 "AO: Client uses wrong password" + + log_start + run_cmd nettest -s -A ${MD5_PW} -m ${NSB_LO_IP} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 2 "AO: Client address does not match address configured on server" + + # no prefixlen for AO yet +} + +ipv6_tcp_authopt_novrf() +{ + enable_tcp_authopt + if ! has_tcp_authopt; then + echo "TCP-AO appears to be missing, skip" + return 0 + fi + + log_start + run_cmd nettest -6 -s -A ${MD5_PW} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 0 "AO: Simple correct config" + + log_start + run_cmd nettest -6 -s + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 2 "AO: Server no config, client uses password" + + log_start + run_cmd nettest -6 -s -A ${MD5_PW} -m ${NSB_IP6} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW} + log_test $? 2 "AO: Client uses wrong password" + + log_start + run_cmd nettest -6 -s -A ${MD5_PW} -m ${NSB_LO_IP6} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 2 "AO: Client address does not match address configured on server" + + # no prefixlen for AO yet +} + +ipv4_tcp_authopt_vrf() +{ + enable_tcp_authopt + if ! has_tcp_authopt; then + echo "TCP-AO appears to be missing, skip" + return 0 + fi + + log_start + run_cmd nettest -s -I ${VRF} -A ${MD5_PW} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Simple config" + + # + # duplicate config between default VRF and a VRF + # + + log_start + run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in VRF" + + log_start + run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_WRONG_PW} + log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in default-VRF" + + log_start + show_hint "Should timeout since client in default VRF uses VRF password" + run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in default-VRF with VRF pw" + + log_start + show_hint "Should timeout since client in VRF uses default VRF password" + run_cmd nettest -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -A ${MD5_WRONG_PW} -m ${NSB_IP} & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_WRONG_PW} + log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in VRF with default-VRF pw" + + test_ipv4_tcp_authopt_vrf__global_server__bind_ifindex0 +} + +test_ipv4_tcp_authopt_vrf__global_server__bind_ifindex0() +{ + # This particular test needs tcp_l3mdev_accept=1 for Global server to accept VRF connections + local old_tcp_l3mdev_accept + old_tcp_l3mdev_accept=$(get_sysctl net.ipv4.tcp_l3mdev_accept) + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + + log_start + run_cmd nettest -s -A ${MD5_PW} --force-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 2 "AO: VRF: Global server, Key bound to ifindex=0 rejects VRF connection" + + log_start + run_cmd nettest -s -A ${MD5_PW} --force-bind-key-ifindex & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection" + log_start + + run_cmd nettest -s -A ${MD5_PW} --no-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Global server, key not bound to ifindex accepts VRF connection" + + log_start + run_cmd nettest -s -A ${MD5_PW} --no-bind-key-ifindex & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Global server, key not bound to ifindex accepts non-VRF connection" + + # restore value + set_sysctl net.ipv4.tcp_l3mdev_accept="$old_tcp_l3mdev_accept" +} + +ipv6_tcp_authopt_vrf() +{ + enable_tcp_authopt + if ! has_tcp_authopt; then + echo "TCP-AO appears to be missing, skip" + return 0 + fi + + log_start + run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Simple config" + + # + # duplicate config between default VRF and a VRF + # + + log_start + run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in VRF" + + log_start + run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} & + sleep 1 + run_cmd_nsc nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW} + log_test $? 0 "AO: VRF: Servers in default-VRF and VRF, client in default-VRF" + + log_start + show_hint "Should timeout since client in default VRF uses VRF password" + run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} & + sleep 1 + run_cmd_nsc nettest -6 -r ${NSA_IP6} -A ${MD5_PW} + log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in default-VRF with VRF pw" + + log_start + show_hint "Should timeout since client in VRF uses default VRF password" + run_cmd nettest -6 -s -I ${VRF} -A ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -A ${MD5_WRONG_PW} -m ${NSB_IP6} & + sleep 1 + run_cmd_nsb nettest -6 -r ${NSA_IP6} -A ${MD5_WRONG_PW} + log_test $? 2 "AO: VRF: Servers in default VRF and VRF, conn in VRF with default-VRF pw" +} + +only_tcp_authopt() +{ + log_section "TCP Authentication Option" + + setup + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + log_subsection "TCP-AO IPv4 no VRF" + ipv4_tcp_authopt_novrf + log_subsection "TCP-AO IPv6 no VRF" + ipv6_tcp_authopt_novrf + + setup "yes" + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + log_subsection "TCP-AO IPv4 VRF" + ipv4_tcp_authopt_vrf + log_subsection "TCP-AO IPv6 VRF" + ipv6_tcp_authopt_vrf +} + # # MD5 tests without VRF # ipv4_tcp_md5_novrf() { @@ -1185,10 +1427,11 @@ ipv4_tcp_novrf() show_hint "Should fail 'Connection refused'" run_cmd nettest -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 1 "No server, device client, local conn"
ipv4_tcp_md5_novrf + ipv4_tcp_authopt_novrf }
ipv4_tcp_vrf() { local a @@ -1239,10 +1482,12 @@ ipv4_tcp_vrf() run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests ipv4_tcp_md5 + # run AO tests + ipv6_tcp_md5_vrf
# # enable VRF global server # log_subsection "VRF Global server enabled" @@ -2648,10 +2893,11 @@ ipv6_tcp_novrf() run_cmd nettest -6 -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 1 "No server, device client, local conn" done
ipv6_tcp_md5_novrf + ipv6_tcp_authopt_novrf }
ipv6_tcp_vrf() { local a @@ -2718,10 +2964,12 @@ ipv6_tcp_vrf() run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests ipv6_tcp_md5 + # run AO tests + ipv6_tcp_authopt_vrf
# # enable VRF global server # log_subsection "VRF Global server enabled" @@ -4062,10 +4310,11 @@ do ipv6_bind|bind6) ipv6_addr_bind;; ipv6_runtime) ipv6_runtime;; ipv6_netfilter) ipv6_netfilter;;
use_cases) use_cases;; + tcp_authopt) only_tcp_authopt;;
# setup namespaces and config, but do not run any tests setup) setup; exit 0;; vrf_setup) setup "yes"; exit 0;;