Add link extended state attributes.
Signed-off-by: Amit Cohen amitc@mellanox.com Reviewed-by: Petr Machata petrm@mellanox.com Reviewed-by: Jiri Pirko jiri@mellanox.com --- Documentation/networking/ethtool-netlink.rst | 56 ++++++++++++++++++-- 1 file changed, 52 insertions(+), 4 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 7e651ea33eab..4e4570ebbc4d 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -441,10 +441,11 @@ supports. LINKSTATE_GET =============
-Requests link state information. At the moment, only link up/down flag (as -provided by ``ETHTOOL_GLINK`` ioctl command) is provided but some future -extensions are planned (e.g. link down reason). This request does not have any -attributes. +Requests link state information. Link up/down flag (as provided by +``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might +be provided as well. In general, extended state describes reasons for why a port +is down, or why it operates in some non-obvious mode. This request does not have +any attributes.
Request contents:
@@ -459,16 +460,63 @@ Kernel response contents: ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down) ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value + ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state + ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate ==================================== ====== ============================
For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns carrier flag provided by ``netif_carrier_ok()`` but there are drivers which define their own handler.
+``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are +optional values. ethtool core can provide either both +``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``, +or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them. + ``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all devices supporting the request).
+Link extended states: + + ============================ ============================================= + ``Autoneg failure`` Failure during auto negotiation mechanism + + ``Link training failure`` Failure during link training + + ``Link logical mismatch`` Logical mismatch in physical coding sublayer + or forward error correction sublayer + + ``Bad signal integrity`` Signal integrity issues + + ``No cable`` No cable connected + + ``Cable issue`` Failure is related to cable, + e.g., unsupported cable + + ``EEPROM issue`` Failure is related to EEPROM, e.g., failure + during reading or parsing the data + + ``Calibration failure`` Failure during calibration algorithm + + ``Power budget exceeded`` The hardware is not able to provide the + power required from cable or module + + ``Overheat`` The module is overheated + ============================ ============================================= + +Many of the substates are obvious, or terms that someone working in the +particular area will be familiar with. The following table summarizes some +that are not: + +Link extended substates: + + ============================ ============================================= + ``Unsupported rate`` The system attempted to operate the cable at + a rate that is not formally supported, which + led to signal integrity issues + ============================ ============================================= + DEBUG_GET =========