Building on the previous work, add a very simplistic NAT case using ipv4. This just tests dnat transformation
Signed-off-by: Aaron Conole aconole@redhat.com --- NOTE: A number of lines flag the line-length checkpatch warning, but there didnt seem to be a really good way of breaking the lines smaller.
.../selftests/net/openvswitch/openvswitch.sh | 64 +++++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 62 ++++++++++++++++++ 2 files changed, 126 insertions(+)
diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh index 40a66c72af0f0..dced4f612a78c 100755 --- a/tools/testing/selftests/net/openvswitch/openvswitch.sh +++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh @@ -14,6 +14,7 @@ tests=" arp_ping eth-arp: Basic arp ping between two NS ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS + nat_connect_v4 ip4-nat-xon: Basic ipv4 tcp connection via NAT netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"
@@ -300,6 +301,69 @@ test_connect_v4 () { return 0 }
+# nat_connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_nat_connect_v4 () { + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_nat_connect_v4" || return $? + + ovs_add_dp "test_nat_connect_v4" nat4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_nat_connect_v4" "nat4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + ip netns exec client ip route add default via 172.31.110.20 + + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.0.20)" \ + "ct(commit,nat(dst=172.31.110.20)),recirc(0x1)" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \ + "ct(commit,nat),recirc(0x2)" + + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),eth_type(0x0800),ipv4()" "2" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),eth_type(0x0800),ipv4()" "1" + + # do a ping + ovs_sbx "test_nat_connect_v4" ip netns exec client ping 192.168.0.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 192.168.0.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulation diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 1a3dc3762361b..fbdac15e31344 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -530,6 +530,68 @@ class ovsactions(nla): else: ctact["attrs"].append([scan[1], None]) actstr = actstr[strspn(actstr, ", ") :] + # it seems strange to put this here, but nat() is a complex + # sub-action and this lets it sit anywhere in the ct() action + if actstr.startswith("nat"): + actstr = actstr[3:] + natact = ovsactions.ctact.natattr() + + if actstr.startswith("("): + t = None + actstr = actstr[1:] + if actstr.startswith("src"): + t = "OVS_NAT_ATTR_SRC" + actstr = actstr[3:] + elif actstr.startswith("dst"): + t = "OVS_NAT_ATTR_DST" + actstr = actstr[3:] + + actstr, ip_block_min = parse_extract_field( + actstr, "=", "([0-9a-fA-F.]+)", str, False + ) + actstr, ip_block_max = parse_extract_field( + actstr, "-", "([0-9a-fA-F.]+)", str, False + ) + + actstr, proto_min = parse_extract_field( + actstr, ":", "(\d+)", int, False + ) + actstr, proto_max = parse_extract_field( + actstr, "-", "(\d+)", int, False + ) + + if t is not None: + natact["attrs"].append([t, None]) + + if ip_block_min is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MIN", ip_block_min] + ) + if ip_block_max is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MAX", ip_block_max] + ) + if proto_min is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_PROTO_MIN", proto_min] + ) + if proto_max is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_PROTO_MAX", proto_max] + ) + + for natscan in ( + ("persistent", "OVS_NAT_ATTR_PERSISTENT"), + ("hash", "OVS_NAT_ATTR_PROTO_HASH"), + ("random", "OVS_NAT_ATTR_PROTO_RANDOM"), + ): + if actstr.startswith(natscan[0]): + actstr = actstr[len(natscan[0]) :] + natact["attrs"].append([natscan[1], None]) + actstr = actstr[strspn(actstr, ", ") :] + + ctact["attrs"].append(["OVS_CT_ATTR_NAT", natact]) + actstr = actstr[strspn(actstr, ",) ") :]
self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) parsed = True