Hello.
On pátek 13. října 2023 5:31:11 CEST Meng Li wrote:
Hi all:
The core frequency is subjected to the process variation in semiconductors. Not all cores are able to reach the maximum frequency respecting the infrastructure limits. Consequently, AMD has redefined the concept of maximum frequency of a part. This means that a fraction of cores can reach maximum frequency. To find the best process scheduling policy for a given scenario, OS needs to know the core ordering informed by the platform through highest performance capability register of the CPPC interface.
Earlier implementations of amd-pstate preferred core only support a static core ranking and targeted performance. Now it has the ability to dynamically change the preferred core based on the workload and platform conditions and accounting for thermals and aging.
Amd-pstate driver utilizes the functions and data structures provided by the ITMT architecture to enable the scheduler to favor scheduling on cores which can be get a higher frequency with lower voltage. We call it amd-pstate preferred core.
Here sched_set_itmt_core_prio() is called to set priorities and sched_set_itmt_support() is called to enable ITMT feature. Amd-pstate driver uses the highest performance value to indicate the priority of CPU. The higher value has a higher priority.
Amd-pstate driver will provide an initial core ordering at boot time. It relies on the CPPC interface to communicate the core ranking to the operating system and scheduler to make sure that OS is choosing the cores with highest performance firstly for scheduling the process. When amd-pstate driver receives a message with the highest performance change, it will update the core ranking.
Changes form V8->V9:
- all:
- pick up Tested-By flag added by Oleksandr.
- cpufreq: amd-pstate:
- pick up Review-By flag added by Wyes.
- ignore modification of bug.
Thanks for this submission.
The bug you refer to, I assume it should have been fixed by this hunk:
``` --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -542,7 +542,7 @@ static void amd_pstate_adjust_perf(unsigned int cpu, if (target_perf < capacity) des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity);
- min_perf = READ_ONCE(cpudata->highest_perf); + min_perf = READ_ONCE(cpudata->lowest_perf); if (_min_perf < capacity) min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity); ```
which is now missing from this patchset as it was suggested to send it as a separate patch.
Am I correct? If so, are you going to send it as a separate patch within the next round of this patchset, or it will be sent separately (if it hasn't yet)?
- add a attribute of prefcore_ranking.
- modify data type conversion from u32 to int.
- Documentation: amd-pstate:
- pick up Review-By flag added by Wyes.
Changes form V7->V8:
- all:
- pick up Review-By flag added by Mario and Ray.
- cpufreq: amd-pstate:
- use hw_prefcore embeds into cpudata structure.
- delete preferred core init from cpu online/off.
Changes form V6->V7:
- x86:
- Modify kconfig about X86_AMD_PSTATE.
- cpufreq: amd-pstate:
- modify incorrect comments about scheduler_work().
- convert highest_perf data type.
- modify preferred core init when cpu init and online.
- acpi: cppc:
- modify link of CPPC highest performance.
- cpufreq:
- modify link of CPPC highest performance changed.
Changes form V5->V6:
- cpufreq: amd-pstate:
- modify the wrong tag order.
- modify warning about hw_prefcore sysfs attribute.
- delete duplicate comments.
- modify the variable name cppc_highest_perf to prefcore_ranking.
- modify judgment conditions for setting highest_perf.
- modify sysfs attribute for CPPC highest perf to pr_debug message.
- Documentation: amd-pstate:
- modify warning: title underline too short.
Changes form V4->V5:
- cpufreq: amd-pstate:
- modify sysfs attribute for CPPC highest perf.
- modify warning about comments
- rebase linux-next
- cpufreq:
- Moidfy warning about function declarations.
- Documentation: amd-pstate:
- align with ``amd-pstat``
Changes form V3->V4:
- Documentation: amd-pstate:
- Modify inappropriate descriptions.
Changes form V2->V3:
- x86:
- Modify kconfig and description.
- cpufreq: amd-pstate:
- Add Co-developed-by tag in commit message.
- cpufreq:
- Modify commit message.
- Documentation: amd-pstate:
- Modify inappropriate descriptions.
Changes form V1->V2:
- acpi: cppc:
- Add reference link.
- cpufreq:
- Moidfy link error.
- cpufreq: amd-pstate:
- Init the priorities of all online CPUs
- Use a single variable to represent the status of preferred core.
- Documentation:
- Default enabled preferred core.
- Documentation: amd-pstate:
- Modify inappropriate descriptions.
- Default enabled preferred core.
- Use a single variable to represent the status of preferred core.
Meng Li (7): x86: Drop CPU_SUP_INTEL from SCHED_MC_PRIO for the expansion. acpi: cppc: Add get the highest performance cppc control cpufreq: amd-pstate: Enable amd-pstate preferred core supporting. cpufreq: Add a notification message that the highest perf has changed cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically Documentation: amd-pstate: introduce amd-pstate preferred core Documentation: introduce amd-pstate preferrd core mode kernel command line options
.../admin-guide/kernel-parameters.txt | 5 + Documentation/admin-guide/pm/amd-pstate.rst | 59 ++++- arch/x86/Kconfig | 5 +- drivers/acpi/cppc_acpi.c | 13 ++ drivers/acpi/processor_driver.c | 6 + drivers/cpufreq/amd-pstate.c | 204 ++++++++++++++++-- drivers/cpufreq/cpufreq.c | 13 ++ include/acpi/cppc_acpi.h | 5 + include/linux/amd-pstate.h | 10 + include/linux/cpufreq.h | 5 + 10 files changed, 305 insertions(+), 20 deletions(-)