v24: Took PaulW suggestion for fixing commit desc and checkpatch fixes in patch #21. "riscv: kernel command line option to opt out of user cfi" Collected "Tested-by" tags from Andreas and Valentin. Thanks a lot for testing it.
v23: fixed some of the "CHECK:" reported on checkpatch --strict. Accepted Joel's suggestion for kselftest's Makefile. CONFIG_RISCV_USER_CFI is enabled when zicfiss, zicfilp and fcf-protection are all present in toolchain
v22: fixing build error due to -march=zicfiss being picked in gcc-13 and above but not actually doing any codegen or recognizing instruction for zicfiss. Change in v22 makes dependence on `-fcf-protection=full` compiler flag to ensure that toolchain has support and then only CONFIG_RISCV_USER_CFI will be visible in menuconfig.
v21: fixed build errors.
Basics and overview ===================
Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory.
To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with
- `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions
More information an details can be found at extensions github repo [1].
Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack.
x86 and arm64 support for user mode shadow stack is already in mainline.
Kernel awareness for user control flow integrity ================================================
This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series.
Enabling:
In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s).
clone/fork:
On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call.
map_shadow_stack:
x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well.
signal management:
If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers.
In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive)
config and compilation:
Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime.
To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst
How to test this series =======================
Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc)
Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc)
Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic
Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it.
$ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc)
Running -------
Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true
References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.co... [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identifica... [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-in... [6] - https://lwn.net/Articles/940403/
To: Thomas Gleixner tglx@linutronix.de To: Ingo Molnar mingo@redhat.com To: Borislav Petkov bp@alien8.de To: Dave Hansen dave.hansen@linux.intel.com To: x86@kernel.org To: H. Peter Anvin hpa@zytor.com To: Andrew Morton akpm@linux-foundation.org To: Liam R. Howlett Liam.Howlett@oracle.com To: Vlastimil Babka vbabka@suse.cz To: Lorenzo Stoakes lorenzo.stoakes@oracle.com To: Paul Walmsley paul.walmsley@sifive.com To: Palmer Dabbelt palmer@dabbelt.com To: Albert Ou aou@eecs.berkeley.edu To: Conor Dooley conor@kernel.org To: Rob Herring robh@kernel.org To: Krzysztof Kozlowski krzk+dt@kernel.org To: Arnd Bergmann arnd@arndb.de To: Christian Brauner brauner@kernel.org To: Peter Zijlstra peterz@infradead.org To: Oleg Nesterov oleg@redhat.com To: Eric Biederman ebiederm@xmission.com To: Kees Cook kees@kernel.org To: Jonathan Corbet corbet@lwn.net To: Shuah Khan shuah@kernel.org To: Jann Horn jannh@google.com To: Conor Dooley conor+dt@kernel.org To: Miguel Ojeda ojeda@kernel.org To: Alex Gaynor alex.gaynor@gmail.com To: Boqun Feng boqun.feng@gmail.com To: Gary Guo gary@garyguo.net To: Björn Roy Baron bjorn3_gh@protonmail.com To: Benno Lossin benno.lossin@proton.me To: Andreas Hindborg a.hindborg@kernel.org To: Alice Ryhl aliceryhl@google.com To: Trevor Gross tmgross@umich.edu Cc: linux-kernel@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-riscv@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: alistair.francis@wdc.com Cc: richard.henderson@linaro.org Cc: jim.shu@sifive.com Cc: andybnac@gmail.com Cc: kito.cheng@sifive.com Cc: charlie@rivosinc.com Cc: atishp@rivosinc.com Cc: evan@rivosinc.com Cc: cleger@rivosinc.com Cc: alexghiti@rivosinc.com Cc: samitolvanen@google.com Cc: broonie@kernel.org Cc: rick.p.edgecombe@intel.com Cc: rust-for-linux@vger.kernel.org
changelog --------- v24: - Checkpatch fixes in patch # 21. - Collected "Tested-by" tags.
v23: - fixed some of the "CHECK:" reported on checkpatch --strict. - Accepted Joel's suggestion for kselftest's Makefile. - CONFIG_RISCV_USER_CFI is enabled when zicfiss, zicfilp and fcf-protection are all present in toolchain
v22: - CONFIG_RISCV_USER_CFI was by default "n". With dual vdso support it is default "y" (if toolchain supports it). Fixing build error due to "-march=zicfiss" being picked in gcc-13 partially. gcc-13 only recognizes the flag but not actually doing any codegen or recognizing instruction for zicfiss. Change in v22 makes dependence on `-fcf-protection=full` compiler flag to ensure that toolchain has support and then only CONFIG_RISCV_USER_CFI will be visible in menuconfig. - picked up tags and some cosmetic changes in commit message for dual vdso patch.
v21: - Fixing build errors due to changes in arch/riscv/include/asm/vdso.h Using #ifdef instead of IS_ENABLED in arch/riscv/include/asm/vdso.h vdso-cfi-offsets.h should be included only when CONFIG_RISCV_USER_CFI is selected.
v20: - rebased on v6.18-rc1. - Added two vDSO support. If `CONFIG_RISCV_USER_CFI` is selected two vDSOs are compiled (one for hardware prior to RVA23 and one for RVA23 onwards). Kernel exposes RVA23 vDSO if hardware/cpu implements zimop else exposes existing vDSO to userspace. - default selection for `CONFIG_RISCV_USER_CFI` is "Yes". - replaced "__ASSEMBLY__" with "__ASSEMBLER__"
v19: - riscv_nousercfi was `int`. changed it to unsigned long. Thanks to Alex Ghiti for reporting it. It was a bug. - ELP is cleared on trap entry only when CONFIG_64BIT. - restore ssp back on return to usermode was being done before `riscv_v_context_nesting_end` on trap exit path. If kernel shadow stack were enabled this would result in kernel operating on user shadow stack and panic (as I found in my testing of kcfi patch series). So fixed that.
v18: - rebased on 6.16-rc1 - uprobe handling clears ELP in sstatus image in pt_regs - vdso was missing shadow stack elf note for object files. added that. Additional asm file for vdso needed the elf marker flag. toolchain should complain if `-fcf-protection=full` and marker is missing for object generated from asm file. Asked toolchain folks to fix this. Although no reason to gate the merge on that. - Split up compile options for march and fcf-protection in vdso Makefile - CONFIG_RISCV_USER_CFI option is moved under "Kernel features" menu Added `arch/riscv/configs/hardening.config` fragment which selects CONFIG_RISCV_USER_CFI
v17: - fixed warnings due to empty macros in usercfi.h (reported by alexg) - fixed prefixes in commit titles reported by alexg - took below uprobe with fcfi v2 patch from Zong Li and squashed it with "riscv/traps: Introduce software check exception and uprobe handling" https://lore.kernel.org/all/20250604093403.10916-1-zong.li@sifive.com/
v16: - If FWFT is not implemented or returns error for shadow stack activation, then no_usercfi is set to disable shadow stack. Although this should be picked up by extension validation and activation. Fixed this bug for zicfilp and zicfiss both. Thanks to Charlie Jenkins for reporting this. - If toolchain doesn't support cfi, cfi kselftest shouldn't build. Suggested by Charlie Jenkins. - Default for CONFIG_RISCV_USER_CFI is set to no. Charlie/Atish suggested to keep it off till we have more hardware availibility with RVA23 profile and zimop/zcmop implemented. Else this will start breaking people's workflow - Includes the fix if "!RV64 and !SBI" then definitions for FWFT in asm-offsets.c error.
v15: - Toolchain has been updated to include `-fcf-protection` flag. This exists for x86 as well. Updated kernel patches to compile vDSO and selftest to compile with `fcf-protection=full` flag. - selecting CONFIG_RISCV_USERCFI selects CONFIG_RISCV_SBI. - Patch to enable shadow stack for kernel wasn't hidden behind CONFIG_RISCV_USERCFI and CONFIG_RISCV_SBI. fixed that.
v14: - rebased on top of palmer/sbi-v3. Thus dropped clement's FWFT patches Updated RISCV_ISA_EXT_XXXX in hwcap and hwprobe constants. - Took Radim's suggestions on bitfields. - Placed cfi_state at the end of thread_info block so that current situation is not disturbed with respect to member fields of thread_info in single cacheline.
v13: - cpu_supports_shadow_stack/cpu_supports_indirect_br_lp_instr uses riscv_has_extension_unlikely() - uses nops(count) to create nop slide - RISCV_ACQUIRE_BARRIER is not needed in `amo_user_shstk`. Removed it - changed ternaries to simply use implicit casting to convert to bool. - kernel command line allows to disable zicfilp and zicfiss independently. updated kernel-parameters.txt. - ptrace user abi for cfi uses bitmasks instead of bitfields. Added ptrace kselftest. - cosmetic and grammatical changes to documentation.
v12: - It seems like I had accidently squashed arch agnostic indirect branch tracking prctl and riscv implementation of those prctls. Split them again. - set_shstk_status/set_indir_lp_status perform CSR writes only when CPU support is available. As suggested by Zong Li. - Some minor clean up in kselftests as suggested by Zong Li.
v11: - patch "arch/riscv: compile vdso with landing pad" was unconditionally selecting `_zicfilp` for vDSO compile. fixed that. Changed `lpad 1` to to `lpad 0`. v10: - dropped "mm: helper `is_shadow_stack_vma` to check shadow stack vma". This patch is not that interesting to this patch series for risc-v. There are instances in arch directories where VM_SHADOW_STACK flag is anyways used. Dropping this patch to expedite merging in riscv tree. - Took suggestions from `Clement` on "riscv: zicfiss / zicfilp enumeration" to validate presence of cfi based on config. - Added a patch for vDSO to have `lpad 0`. I had omitted this earlier to make sure we add single vdso object with cfi enabled. But a vdso object with scheme of zero labeled landing pad is least common denominator and should work with all objects of zero labeled as well as function-signature labeled objects.
v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs)
v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next
v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.c... - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@rivo...
v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code)
v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware-...) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@rivo... (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches)
v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/
v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series.
- dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review
- arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack
- hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe
- selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit.
- Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/
v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel.
- Enabling of control flow integrity for user programs is left to user runtime
- This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv.
--- Changes in v24: - Link to v23: https://lore.kernel.org/r/20251112-v5_user_cfi_series-v23-0-b55691eacf4f@riv...
Changes in v23: - Link to v22: https://lore.kernel.org/r/20251023-v5_user_cfi_series-v22-0-1935270f7636@riv...
Changes in v22: - Link to v21: https://lore.kernel.org/r/20251015-v5_user_cfi_series-v21-0-6a07856e90e7@riv...
Changes in v21: - Link to v20: https://lore.kernel.org/r/20251013-v5_user_cfi_series-v20-0-b9de4be9912e@riv...
Changes in v20: - Link to v19: https://lore.kernel.org/r/20250731-v5_user_cfi_series-v19-0-09b468d7beab@riv...
Changes in v19: - Link to v18: https://lore.kernel.org/r/20250711-v5_user_cfi_series-v18-0-a8ee62f9f38e@riv...
Changes in v18: - Link to v17: https://lore.kernel.org/r/20250604-v5_user_cfi_series-v17-0-4565c2cf869f@riv...
Changes in v17: - Link to v16: https://lore.kernel.org/r/20250522-v5_user_cfi_series-v16-0-64f61a35eee7@riv...
Changes in v16: - Link to v15: https://lore.kernel.org/r/20250502-v5_user_cfi_series-v15-0-914966471885@riv...
Changes in v15: - changelog posted just below cover letter - Link to v14: https://lore.kernel.org/r/20250429-v5_user_cfi_series-v14-0-5239410d012a@riv...
Changes in v14:
- changelog posted just below cover letter - Link to v13: https://lore.kernel.org/r/20250424-v5_user_cfi_series-v13-0-971437de586a@riv...
Changes in v13: - changelog posted just below cover letter - Link to v12: https://lore.kernel.org/r/20250314-v5_user_cfi_series-v12-0-e51202b53138@riv...
Changes in v12: - changelog posted just below cover letter - Link to v11: https://lore.kernel.org/r/20250310-v5_user_cfi_series-v11-0-86b36cbfb910@riv...
Changes in v11: - changelog posted just below cover letter - Link to v10: https://lore.kernel.org/r/20250210-v5_user_cfi_series-v10-0-163dcfa31c60@riv...
--- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext
Deepak Gupta (26): mm: VM_SHADOW_STACK definition for riscv dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv/mm: manufacture shadow stack pte riscv/mm: teach pte_mkwrite to manufacture shadow stack PTEs riscv/mm: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception and uprobe handling riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: kernel command line option to opt out of user cfi riscv: enable kernel access to shadow stack memory via FWFT sbi call arch/riscv: dual vdso creation logic and select vdso based on hw riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi
Jim Shu (1): arch/riscv: compile vdso with landing pad and shadow stack note
Documentation/admin-guide/kernel-parameters.txt | 8 + Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 179 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 22 + arch/riscv/Makefile | 8 +- arch/riscv/configs/hardening.config | 4 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/assembler.h | 44 ++ arch/riscv/include/asm/cpufeature.h | 12 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 26 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 1 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 98 ++++ arch/riscv/include/asm/vdso.h | 13 +- arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 34 ++ arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/asm-offsets.c | 10 + arch/riscv/kernel/cpufeature.c | 25 + arch/riscv/kernel/entry.S | 38 ++ arch/riscv/kernel/head.S | 27 + arch/riscv/kernel/process.c | 27 +- arch/riscv/kernel/ptrace.c | 95 ++++ arch/riscv/kernel/signal.c | 148 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 54 ++ arch/riscv/kernel/usercfi.c | 545 +++++++++++++++++++++ arch/riscv/kernel/vdso.c | 7 + arch/riscv/kernel/vdso/Makefile | 40 +- arch/riscv/kernel/vdso/flush_icache.S | 4 + arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 4 +- arch/riscv/kernel/vdso/getcpu.S | 4 + arch/riscv/kernel/vdso/note.S | 3 + arch/riscv/kernel/vdso/rt_sigreturn.S | 4 + arch/riscv/kernel/vdso/sys_hwprobe.S | 4 + arch/riscv/kernel/vdso/vgetrandom-chacha.S | 5 +- arch/riscv/kernel/vdso_cfi/Makefile | 25 + arch/riscv/kernel/vdso_cfi/vdso-cfi.S | 11 + arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 16 + include/linux/cpu.h | 4 + include/linux/mm.h | 7 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 27 + kernel/sys.c | 30 ++ tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 2 + tools/testing/selftests/riscv/cfi/Makefile | 23 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 82 ++++ tools/testing/selftests/riscv/cfi/cfitests.c | 173 +++++++ tools/testing/selftests/riscv/cfi/shadowstack.c | 385 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 27 + 62 files changed, 2482 insertions(+), 41 deletions(-) --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug