On Tue, Oct 01, 2019 at 11:50:33AM +0200, Simon Horman wrote:
On Fri, Sep 27, 2019 at 02:21:04PM +0800, Haishuang Yan wrote:
Test virutal server via directing routing for IPv4.
Tested:
# selftests: netfilter: ipvs.sh # Testing DR mode... # ipvs.sh: PASS ok 6 selftests: netfilter: ipvs.sh
Signed-off-by: Haishuang Yan yanhaishuang@cmss.chinamobile.com
v2: optimize test script
tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/ipvs.sh | 184 +++++++++++++++++++++++++++++ 2 files changed, 185 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 4144984..de1032b 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -2,6 +2,6 @@ # Makefile for netfilter selftests
TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
- conntrack_icmp_related.sh nft_flowtable.sh
- conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
include ../lib.mk diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh new file mode 100755 index 0000000..658c06b --- /dev/null +++ b/tools/testing/selftests/netfilter/ipvs.sh @@ -0,0 +1,184 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# End-to-end ipvs test suite +# Topology: +#--------------------------------------------------------------+ +# | | +# ns0 | ns1 | +# ----------- | ----------- ----------- | +# | veth01 | --------- | veth10 | | veth12 | | +# ----------- peer ----------- ----------- | +# | | | | +# ----------- | | | +# | br0 | |----------------- peer |--------------| +# ----------- | | | +# | | | | +# ---------- peer ---------- ----------- | +# | veth02 | --------- | veth20 | | veth21 | | +# ---------- | ---------- ----------- | +# | ns2 | +# | | +#--------------------------------------------------------------+ +# +# We assume that all network driver are loaded +#
+# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 +GREEN='\033[0;92m' +RED='\033[0;31m' +NC='\033[0m' # No Color
+readonly port=8080
+readonly vip_v4=207.175.44.110 +readonly cip_v4=10.0.0.2 +readonly gip_v4=10.0.0.1 +readonly dip_v4=172.16.0.1 +readonly rip_v4=172.16.0.2 +readonly sip_v4=10.0.0.3
+readonly infile="$(mktemp)" +readonly outfile="$(mktemp)"
+sysipvsnet=/proc/sys/net/ipv4/vs/ +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
- modprobe -q ip_vs
- if [ $? -ne 0 ]; then
echo "SKIP: Could not run test without ipvs module"exit $ksft_skip- fi
+fi
+ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ]; then
- echo "SKIP: Could not run test without ip tool"
- exit $ksft_skip
+fi
+ipvsadm -v > /dev/null 2>&1 +if [ $? -ne 0 ]; then
- echo "SKIP: Could not run test without ipvsadm"
- exit $ksft_skip
+fi
+nc --version > /dev/null 2>&1 +if [ $? -ne 0 ]; then
- echo "SKIP: Could not run test without ncat"
- exit $ksft_skip
+fi
+setup() {
- ip netns add ns0
- ip netns add ns1
- ip netns add ns2
- ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
- ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
- ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
- ip netns exec ns0 ip link set veth01 up
- ip netns exec ns0 ip link set veth02 up
- ip netns exec ns0 ip link add br0 type bridge
- ip netns exec ns0 ip link set veth01 master br0
- ip netns exec ns0 ip link set veth02 master br0
- ip netns exec ns0 ip link set br0 up
- ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
- ip netns exec ns1 ip link set lo up
- ip netns exec ns1 ip link set veth10 up
- ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
- ip netns exec ns1 ip link set veth12 up
- ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
- ip netns exec ns2 ip link set lo up
- ip netns exec ns2 ip link set veth21 up
- ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
- ip netns exec ns2 ip link set veth20 up
- ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
+}
+cleanup() {
- for i in 0 1 2
- do
- ip netns del ns$i > /dev/null 2>&1
- done
- pkill nc
+}
+server_listen() {
- ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
- server_pid=$!
- sleep 0.2
+}
+client_connect() {
- ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
+}
+verify_data() {
- wait "${server_pid}"
- # sha1sum returns two fields [sha1] [filepath]
- # convert to bash array and access first elem
- insum=($(sha1sum ${infile}))
When /bin/sh is dash the line above results in an error
./ipvs.sh: 125: ./ipvs.sh: Syntax error: "(" unexpected (expecting "}")
Could you work on making the script free of bashisms. Or, if that proves to be an exceisive burden, use #!/bin/bash
Better use #!/bin/bash -p, to prevent bash using functions from the environment
Cheers ... Duncan.
Thanks!
- outsum=($(sha1sum ${outfile}))
- if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
echo "data mismatch"exit 1- fi
+}
+test_service() {
- server_listen
- client_connect
- ret=$?
- if [ $ret -ne 0 ]; then
- return $ret
- fi
- verify_data
+}
+test_dr() {
- ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
- ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
- ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
- ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
- ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
- # avoid incorrect arp response
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
- # avoid reverse route lookup
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
- ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
- ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
- test_service
+}
+run_tests() {
- local errors=
- echo "Testing DR mode..."
- setup
- test_dr
- errors=$(( $errors + $? ))
- return $errors
+}
+trap cleanup EXIT
+cleanup +run_tests
+if [ $? -ne 0 ]; then
- echo -e "$(basename $0): ${RED}FAIL${NC}"
- exit 1
+fi +echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0
1.8.3.1