The new strict mode functionality is tested in different configurations and on different network namespaces.
Signed-off-by: Andrea Mayer andrea.mayer@uniroma2.it --- .../selftests/net/vrf_strict_mode_test.sh | 390 ++++++++++++++++++ 1 file changed, 390 insertions(+) create mode 100755 tools/testing/selftests/net/vrf_strict_mode_test.sh
diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh new file mode 100755 index 000000000000..5274f4a1fba1 --- /dev/null +++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh @@ -0,0 +1,390 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is designed for testing the new VRF strict_mode functionality. + +ret=0 + +# identifies the "init" network namespace which is often called root network +# namespace. +INIT_NETNS_NAME="init" + +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "\n TEST: %-60s [ OK ]\n" "${msg}" + else + ret=1 + nfail=$((nfail+1)) + printf "\n TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +print_log_test_results() +{ + if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} + fi +} + +log_section() +{ + echo + echo "################################################################################" + echo "TEST SECTION: $*" + echo "################################################################################" +} + +ip_expand_args() +{ + local nsname=$1 + local nsarg="" + + if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then + nsarg="-netns ${nsname}" + fi + + echo "${nsarg}" +} + +vrf_count() +{ + local nsname=$1 + local nsarg="$(ip_expand_args ${nsname})" + + ip ${nsarg} -o link show type vrf | wc -l +} + +count_vrf_by_table_id() +{ + local nsname=$1 + local tableid=$2 + local nsarg="$(ip_expand_args ${nsname})" + + ip ${nsarg} -d -o link show type vrf | grep "table ${tableid}" | wc -l +} + +add_vrf() +{ + local nsname=$1 + local vrfname=$2 + local vrftable=$3 + local nsarg="$(ip_expand_args ${nsname})" + + ip ${nsarg} link add ${vrfname} type vrf table ${vrftable} &>/dev/null +} + +add_vrf_and_check() +{ + local nsname=$1 + local vrfname=$2 + local vrftable=$3 + local cnt + local rc + + add_vrf ${nsname} ${vrfname} ${vrftable}; rc=$? + + cnt=$(count_vrf_by_table_id ${nsname} ${vrftable}) + + log_test ${rc} 0 "${nsname}: add vrf ${vrfname}, ${cnt} vrfs for table ${vrftable}" +} + +add_vrf_and_check_fail() +{ + local nsname=$1 + local vrfname=$2 + local vrftable=$3 + local cnt + local rc + + add_vrf ${nsname} ${vrfname} ${vrftable}; rc=$? + + cnt=$(count_vrf_by_table_id ${nsname} ${vrftable}) + + log_test ${rc} 2 "${nsname}: CANNOT add vrf ${vrfname}, ${cnt} vrfs for table ${vrftable}" +} + +del_vrf_and_check() +{ + local nsname=$1 + local vrfname=$2 + local nsarg="$(ip_expand_args ${nsname})" + + ip ${nsarg} link del ${vrfname} + log_test $? 0 "${nsname}: remove vrf ${vrfname}" +} + +config_vrf_and_check() +{ + local nsname=$1 + local addr=$2 + local vrfname=$3 + local nsarg="$(ip_expand_args ${nsname})" + + ip ${nsarg} link set dev ${vrfname} up && \ + ip ${nsarg} addr add ${addr} dev ${vrfname} + log_test $? 0 "${nsname}: vrf ${vrfname} up, addr ${addr}" +} + +read_strict_mode() +{ + local nsname=$1 + local rval + local rc=0 + local nsexec="" + + if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then + # a custom network namespace is provided + nsexec="ip netns exec ${nsname}" + fi + + rval="$(${nsexec} bash -c "cat /proc/sys/net/vrf/strict_mode" | \ + grep -E "^[0-1]$")" &> /dev/null + if [ $? -ne 0 ]; then + # set errors + rval=255 + rc=1 + fi + + # on success, rval can be only 0 or 1; on error, rval is equal to 255 + echo ${rval} + return ${rc} +} + +read_strict_mode_compare_and_check() +{ + local nsname=$1 + local expected=$2 + local res + + res="$(read_strict_mode ${nsname})" + log_test ${res} ${expected} "${nsname}: check strict_mode=${res}" +} + +set_strict_mode() +{ + local nsname=$1 + local val=$2 + local nsexec="" + + if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then + # a custom network namespace is provided + nsexec="ip netns exec ${nsname}" + fi + + ${nsexec} bash -c "echo ${val} >/proc/sys/net/vrf/strict_mode" &>/dev/null +} + +enable_strict_mode() +{ + local nsname=$1 + + set_strict_mode ${nsname} 1 +} + +disable_strict_mode() +{ + local nsname=$1 + + set_strict_mode ${nsname} 0 +} + +disable_strict_mode_and_check() +{ + local nsname=$1 + + disable_strict_mode ${nsname} + log_test $? 0 "${nsname}: disable strict_mode (=0)" +} + +enable_strict_mode_and_check() +{ + local nsname=$1 + + enable_strict_mode ${nsname} + log_test $? 0 "${nsname}: enable strict_mode (=1)" +} + +enable_strict_mode_and_check_fail() +{ + local nsname=$1 + + enable_strict_mode ${nsname} + log_test $? 1 "${nsname}: CANNOT enable strict_mode" +} + +strict_mode_check_default() +{ + local nsname=$1 + local strictmode + local vrfcnt + + vrfcnt=$(vrf_count ${nsname}) + strictmode=$(read_strict_mode ${nsname}) + log_test ${strictmode} 0 "${nsname}: strict_mode=0 by default, ${vrfcnt} vrfs" +} + +setup() +{ + modprobe vrf + + ip netns add testns + ip netns exec testns ip link set lo up +} + +cleanup() +{ + ip netns del testns 2>/dev/null + + ip link del vrf100 2>/dev/null + ip link del vrf101 2>/dev/null + ip link del vrf102 2>/dev/null + + echo 0 >/proc/sys/net/vrf/strict_mode 2>/dev/null +} + +vrf_strict_mode_tests_init() +{ + vrf_strict_mode_check_support init + + strict_mode_check_default init + + add_vrf_and_check init vrf100 100 + config_vrf_and_check init 172.16.100.1/24 vrf100 + + enable_strict_mode_and_check init + + add_vrf_and_check_fail init vrf101 100 + + disable_strict_mode_and_check init + + add_vrf_and_check init vrf101 100 + config_vrf_and_check init 172.16.101.1/24 vrf101 + + enable_strict_mode_and_check_fail init + + del_vrf_and_check init vrf101 + + enable_strict_mode_and_check init + + add_vrf_and_check init vrf102 102 + config_vrf_and_check init 172.16.102.1/24 vrf102 + + # the strict_modle is enabled in the init +} + +vrf_strict_mode_tests_testns() +{ + vrf_strict_mode_check_support testns + + strict_mode_check_default testns + + enable_strict_mode_and_check testns + + add_vrf_and_check testns vrf100 100 + config_vrf_and_check testns 10.0.100.1/24 vrf100 + + add_vrf_and_check_fail testns vrf101 100 + + add_vrf_and_check_fail testns vrf102 100 + + add_vrf_and_check testns vrf200 200 + + disable_strict_mode_and_check testns + + add_vrf_and_check testns vrf101 100 + + add_vrf_and_check testns vrf102 100 + + #the strict_mode is disabled in the testns +} + +vrf_strict_mode_tests_mix() +{ + read_strict_mode_compare_and_check init 1 + + read_strict_mode_compare_and_check testns 0 + + del_vrf_and_check testns vrf101 + + del_vrf_and_check testns vrf102 + + disable_strict_mode_and_check init + + enable_strict_mode_and_check testns + + enable_strict_mode_and_check init + enable_strict_mode_and_check init + + disable_strict_mode_and_check testns + disable_strict_mode_and_check testns + + read_strict_mode_compare_and_check init 1 + + read_strict_mode_compare_and_check testns 0 +} + +vrf_strict_mode_tests() +{ + log_section "VRF strict_mode test on init network namespace" + vrf_strict_mode_tests_init + + log_section "VRF strict_mode test on testns network namespace" + vrf_strict_mode_tests_testns + + log_section "VRF strict_mode test mixing init and testns network namespaces" + vrf_strict_mode_tests_mix +} + +vrf_strict_mode_check_support() +{ + local nsname=$1 + local output + local rc + + output="$(lsmod | grep '^vrf' | awk '{print $1}')" + if [ -z "${output}" ]; then + modinfo vrf || return $? + fi + + # we do not care about the value of the strict_mode; we only check if + # the strict_mode parameter is available or not. + read_strict_mode ${nsname} &>/dev/null; rc=$? + log_test ${rc} 0 "${nsname}: net.vrf.strict_mode is available" + + return ${rc} +} + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit 0 +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool" + exit 0 +fi + +cleanup &> /dev/null + +setup +vrf_strict_mode_tests +cleanup + +print_log_test_results + +exit $ret