Add test to make sure that the localbypass option is on by default.
Add test to change vxlan localbypass to nolocalbypass and check that packets are delivered to userspace.
Signed-off-by: Vladimir Nikishkin vladimir@nikishkin.pw --- tools/testing/selftests/net/Makefile | 1 + .../selftests/net/test_vxlan_nolocalbypass.sh | 240 ++++++++++++++++++ 2 files changed, 241 insertions(+) create mode 100755 tools/testing/selftests/net/test_vxlan_nolocalbypass.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index c12df57d5539..7f3ab2a93ed6 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -84,6 +84,7 @@ TEST_GEN_FILES += ip_local_port_range TEST_GEN_FILES += bind_wildcard TEST_PROGS += test_vxlan_mdb.sh TEST_PROGS += test_bridge_neigh_suppress.sh +TEST_PROGS += test_vxlan_nolocalbypass.sh
TEST_FILES := settings
diff --git a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh new file mode 100755 index 000000000000..46067db53068 --- /dev/null +++ b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh @@ -0,0 +1,240 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking the [no]localbypass VXLAN device option. The test +# configures two VXLAN devices in the same network namespace and a tc filter on +# the loopback device that drops encapsulated packets. The test sends packets +# from the first VXLAN device and verifies that by default these packets are +# received by the second VXLAN device. The test then enables the nolocalbypass +# option and verifies that packets are no longer received by the second VXLAN +# device. + +ret=0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +TESTS=" + nolocalbypass +" +VERBOSE=0 +PAUSE_ON_FAIL=no +PAUSE=no + +################################################################################ +# Utilities + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf "TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "$VERBOSE" = "1" ]; then + echo " rc=$rc, expected $expected" + fi + + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + + [ "$VERBOSE" = "1" ] && echo +} + +run_cmd() +{ + local cmd="$1" + local out + local stderr="2>/dev/null" + + if [ "$VERBOSE" = "1" ]; then + printf "COMMAND: $cmd\n" + stderr= + fi + + out=$(eval $cmd $stderr) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + return $rc +} + +tc_check_packets() +{ + local ns=$1; shift + local id=$1; shift + local handle=$1; shift + local count=$1; shift + local pkts + + sleep 0.1 + pkts=$(tc -n $ns -j -s filter show $id \ + | jq ".[] | select(.options.handle == $handle) | \ + .options.actions[0].stats.packets") + [[ $pkts == $count ]] +} + +################################################################################ +# Setup + +setup() +{ + ip netns add ns1 + + ip -n ns1 link set dev lo up + ip -n ns1 address add 192.0.2.1/32 dev lo + ip -n ns1 address add 198.51.100.1/32 dev lo + + ip -n ns1 link add name vx0 up type vxlan id 100 local 198.51.100.1 \ + dstport 4789 nolearning + ip -n ns1 link add name vx1 up type vxlan id 100 dstport 4790 +} + +cleanup() +{ + ip netns del ns1 &> /dev/null +} + +################################################################################ +# Tests + +nolocalbypass() +{ + local smac=00:01:02:03:04:05 + local dmac=00:0a:0b:0c:0d:0e + + run_cmd "bridge -n ns1 fdb add $dmac dev vx0 self static dst 192.0.2.1 port 4790" + + run_cmd "tc -n ns1 qdisc add dev vx1 clsact" + run_cmd "tc -n ns1 filter add dev vx1 ingress pref 1 handle 101 proto all flower src_mac $smac dst_mac $dmac action pass" + + run_cmd "tc -n ns1 qdisc add dev lo clsact" + run_cmd "tc -n ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop" + + run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + log_test $? 0 "localbypass enabled" + + run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + + tc_check_packets "ns1" "dev vx1 ingress" 101 1 + log_test $? 0 "Packet received by local VXLAN device - localbypass" + + run_cmd "ip -n ns1 link set dev vx0 type vxlan nolocalbypass" + + run_cmd "ip -n ns1 -d link show dev vx0 | grep 'nolocalbypass'" + log_test $? 0 "localbypass disabled" + + run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + + tc_check_packets "ns1" "dev vx1 ingress" 101 1 + log_test $? 0 "Packet not received by local VXLAN device - nolocalbypass" + + run_cmd "ip -n ns1 link set dev vx0 type vxlan localbypass" + + run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + log_test $? 0 "localbypass enabled" + + run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + + tc_check_packets "ns1" "dev vx1 ingress" 101 2 + log_test $? 0 "Packet received by local VXLAN device - localbypass" +} + +################################################################################ +# Usage + +usage() +{ + cat <<EOF +usage: ${0##*/} OPTS + + -t <test> Test(s) to run (default: all) + (options: $TESTS) + -p Pause on fail + -P Pause after each test before cleanup + -v Verbose mode (show commands and output) +EOF +} + +################################################################################ +# Main + +trap cleanup EXIT + +while getopts ":t:pPvh" opt; do + case $opt in + t) TESTS=$OPTARG ;; + p) PAUSE_ON_FAIL=yes;; + P) PAUSE=yes;; + v) VERBOSE=$(($VERBOSE + 1));; + h) usage; exit 0;; + *) usage; exit 1;; + esac +done + +# Make sure we don't pause twice. +[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip; +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +if [ ! -x "$(command -v bridge)" ]; then + echo "SKIP: Could not run test without bridge tool" + exit $ksft_skip +fi + +if [ ! -x "$(command -v mausezahn)" ]; then + echo "SKIP: Could not run test without mausezahn tool" + exit $ksft_skip +fi + +if [ ! -x "$(command -v jq)" ]; then + echo "SKIP: Could not run test without jq tool" + exit $ksft_skip +fi + +ip link help vxlan 2>&1 | grep -q "localbypass" +if [ $? -ne 0 ]; then + echo "SKIP: iproute2 ip too old, missing VXLAN nolocalbypass support" + exit $ksft_skip +fi + +cleanup + +for t in $TESTS +do + setup; $t; cleanup; +done + +if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} +fi + +exit $ret