Add test managed wrappers for of_overlay_apply() that automatically removes the overlay when the test is finished. This API is intended for use by KUnit tests that test code which relies on 'struct device_node's and of_*() APIs.

KUnit tests will call of_overlay_apply_kunit() to load an overlay that's been built into the kernel image. When the test is complete, the overlay will be removed.

This has a few benefits:

1) It keeps the tests hermetic because the overlay is removed when the test is complete. Tests won't even be aware that an overlay was loaded in another test.

2) The overlay code can live right next to the unit test that loads it. The overlay and the unit test can be compiled into one kernel module if desired.

3) We can test different device tree configurations by loading different overlays. The overlays can be written for a specific test, and there can be many of them loaded per-test without needing to jam all possible combinations into one DTB.

4) It also allows KUnit to test device tree dependent code on any architecture, not just UML. This allows KUnit tests to test architecture specific device tree code.

There are some potential pitfalls though. Test authors need to be careful to not overwrite properties in the live tree. The easiest way to do this is to add and remove nodes with a 'kunit-' prefix, almost guaranteeing that the same node won't be present in the tree loaded at boot.

Suggested-by: Rob Herring robh@kernel.org Cc: Rob Herring robh+dt@kernel.org Cc: Frank Rowand frowand.list@gmail.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- Documentation/dev-tools/kunit/api/index.rst | 12 ++ Documentation/dev-tools/kunit/api/of.rst | 13 ++ drivers/of/Makefile | 1 + drivers/of/of_kunit.c | 125 ++++++++++++++++++++ include/kunit/of.h | 94 +++++++++++++++ 5 files changed, 245 insertions(+) create mode 100644 Documentation/dev-tools/kunit/api/of.rst create mode 100644 drivers/of/of_kunit.c create mode 100644 include/kunit/of.h

diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst index 2d8f756aab56..5eb5f76e532c 100644 --- a/Documentation/dev-tools/kunit/api/index.rst +++ b/Documentation/dev-tools/kunit/api/index.rst @@ -9,11 +9,15 @@ API Reference test resource functionredirection + of

This page documents the KUnit kernel testing API. It is divided into the following sections:

+Core KUnit API +============== + Documentation/dev-tools/kunit/api/test.rst

- Documents all of the standard testing API @@ -25,3 +29,11 @@ Documentation/dev-tools/kunit/api/resource.rst Documentation/dev-tools/kunit/api/functionredirection.rst

- Documents the KUnit Function Redirection API + +Driver KUnit API +================ + +Documentation/dev-tools/kunit/api/of.rst + + - Documents the KUnit device tree (OF) API + diff --git a/Documentation/dev-tools/kunit/api/of.rst b/Documentation/dev-tools/kunit/api/of.rst new file mode 100644 index 000000000000..8587591c3e78 --- /dev/null +++ b/Documentation/dev-tools/kunit/api/of.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Device Tree (OF) API +==================== + +The KUnit device tree API is used to test device tree (of_*) dependent code. + +.. kernel-doc:: include/kunit/of.h + :internal: + +.. kernel-doc:: drivers/of/of_kunit.c + :export: diff --git a/drivers/of/Makefile b/drivers/of/Makefile index b11a8adcb985..c694f998b9f5 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -19,6 +19,7 @@ obj-y += kexec.o endif endif

+obj-$(CONFIG_KUNIT) += of_kunit.o obj-$(CONFIG_OF_KUNIT_TEST) += of_test.o

obj-$(CONFIG_OF_UNITTEST) += unittest-data/ diff --git a/drivers/of/of_kunit.c b/drivers/of/of_kunit.c new file mode 100644 index 000000000000..38be23ae1d88 --- /dev/null +++ b/drivers/of/of_kunit.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Test managed device tree APIs + */ + +#include <linux/of.h> +#include <linux/of_fdt.h> + +#include <kunit/of.h> +#include <kunit/test.h> +#include <kunit/resource.h> + +struct of_overlay_fdt_apply_kunit_params { + void *overlay_fdt; + u32 overlay_fdt_size; + int *ovcs_id; +}; + +static int of_overlay_fdt_apply_kunit_init(struct kunit_resource *res, void *context) +{ + struct of_overlay_fdt_apply_kunit_params *params = context; + int ret; + + ret = of_overlay_fdt_apply(params->overlay_fdt, params->overlay_fdt_size, params->ovcs_id); + if (ret) + return ret; + + res->data = (void *)(uintptr_t)(*params->ovcs_id); + + return 0; +} + +static void of_overlay_fdt_apply_kunit_exit(struct kunit_resource *res) +{ + int ovcs_id = (uintptr_t)res->data; + + of_overlay_remove(&ovcs_id); +} + +/** + * of_overlay_fdt_apply_kunit() - Test managed of_overlay_fdt_apply() + * @test: test context + * @overlay_fdt: device tree overlay to apply + * @overlay_fdt_size: size in bytes of @overlay_fdt + * @ovcs_id: identifier of overlay, used to remove the overlay + * + * Just like of_overlay_fdt_apply(), except the overlay is managed by the test + * case and is automatically removed with of_overlay_remove() after the test + * case concludes. + * + * Returns: 0 on success, negative errno on failure. + */ +int of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, + u32 overlay_fdt_size, int *ovcs_id) +{ + struct of_overlay_fdt_apply_kunit_params params = { + .overlay_fdt = overlay_fdt, + .overlay_fdt_size = overlay_fdt_size, + .ovcs_id = ovcs_id, + }; + + if (!IS_ENABLED(CONFIG_OF_OVERLAY)) + kunit_skip(test, "requires CONFIG_OF_OVERLAY"); + + if (!kunit_alloc_resource(test, + of_overlay_fdt_apply_kunit_init, + of_overlay_fdt_apply_kunit_exit, + GFP_KERNEL, &params)) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL_GPL(of_overlay_fdt_apply_kunit); + +/** + * __of_overlay_apply_kunit() - Test managed of_overlay_fdt_apply() variant + * @test: test context + * @overlay_begin: start address of overlay to apply + * @overlay_end: end address of overlay to apply + * + * This is mostly internal API. See of_overlay_apply_kunit() for the wrapper + * that makes this easier to use. + * + * Similar to of_overlay_fdt_apply(), except the overlay is managed by the test + * case and is automatically removed with of_overlay_remove() after the test + * case concludes. + * + * Returns: 0 on success, negative errno on failure. + */ +int __of_overlay_apply_kunit(struct kunit *test, u8 *overlay_begin, + const u8 *overlay_end) +{ + int unused; + + return of_overlay_fdt_apply_kunit(test, overlay_begin, + overlay_end - overlay_begin, + &unused); +} +EXPORT_SYMBOL_GPL(__of_overlay_apply_kunit); + +static void of_node_put_kunit_exit(struct kunit_resource *res) +{ + struct device_node *node = res->data; + + of_node_put(node); +} + +/** + * of_node_put_kunit() - Test managed of_node_put() + * @test: test context + * @node: node to pass to `of_node_put()` + * + * Just like of_node_put(), except the node is managed by the test case and is + * automatically put with of_node_put() after the test case concludes. + * + * Returns: 0 on success, negative errno on failure. + */ +void of_node_put_kunit(struct kunit *test, struct device_node *node) +{ + if (!kunit_alloc_resource(test, NULL, of_node_put_kunit_exit, + GFP_KERNEL, node)) + KUNIT_FAIL(test, + "Can't allocate a kunit resource to put of_node\n"); +} +EXPORT_SYMBOL_GPL(of_node_put_kunit); diff --git a/include/kunit/of.h b/include/kunit/of.h new file mode 100644 index 000000000000..d1f66806e16a --- /dev/null +++ b/include/kunit/of.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _KUNIT_OF_H +#define _KUNIT_OF_H + +#include <kunit/test.h> + +struct device_node; + +#ifdef CONFIG_OF + +int of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, + u32 overlay_fdt_size, int *ovcs_id); +int __of_overlay_apply_kunit(struct kunit *test, u8 *overlay_begin, + const u8 *overlay_end); + +void of_node_put_kunit(struct kunit *test, struct device_node *node); + +#else + +static inline int +of_overlay_fdt_apply_kunit(struct kunit *test, void *overlay_fdt, + u32 overlay_fdt_size, int *ovcs_id) +{ + kunit_skip(test, "requires CONFIG_OF"); + return -EINVAL; +} + +static inline int +__of_overlay_apply_kunit(struct kunit *test, u8 *overlay_begin, + const u8 *overlay_end) +{ + kunit_skip(test, "requires CONFIG_OF"); + return -EINVAL; +} + +static inline +void of_node_put_kunit(struct kunit *test, struct device_node *node) +{ + kunit_skip(test, "requires CONFIG_OF"); +} + +#endif /* !CONFIG_OF */ + +/** + * of_overlay_apply_kunit() - Test managed of_overlay_fdt_apply() for built-in overlays + * @test: test context + * @overlay_name: name of overlay to apply + * + * This macro is used to apply a device tree overlay built with the + * cmd_dt_S_dtbo rule in scripts/Makefile.lib that has been compiled into the + * kernel image or KUnit test module. The overlay is automatically removed when + * the test is finished. + * + * Unit tests that need device tree nodes should compile an overlay file with + * @overlay_name.dtbo.o in their Makefile along with their unit test and then + * load the overlay during their test. The @overlay_name matches the filename + * of the overlay without the dtbo filename extension. If CONFIG_OF_OVERLAY is + * not enabled, the @test will be skipped. + * + * In the Makefile + * + * .. code-block:: none + * + * obj-$(CONFIG_OF_OVERLAY_KUNIT_TEST) += overlay_test.o kunit_overlay_test.dtbo.o + * + * In the test + * + * .. code-block:: c + * + * static void of_overlay_kunit_of_overlay_apply(struct kunit *test) + * { + * struct device_node *np; + * + * KUNIT_ASSERT_EQ(test, 0, + * of_overlay_apply_kunit(test, kunit_overlay_test)); + * + * np = of_find_node_by_name(NULL, "test-kunit"); + * KUNIT_EXPECT_NOT_ERR_OR_NULL(test, np); + * of_node_put(np); + * } + * + * Returns: 0 on success, negative errno on failure. + */ +#define of_overlay_apply_kunit(test, overlay_name) \ +({ \ + extern uint8_t __dtbo_##overlay_name##_begin[]; \ + extern uint8_t __dtbo_##overlay_name##_end[]; \ + \ + __of_overlay_apply_kunit((test), \ + __dtbo_##overlay_name##_begin, \ + __dtbo_##overlay_name##_end); \ +}) + +#endif

Add the vendor prefix "test" to reserve a vendor prefix for bindings that are purely for testing device tree code. This allows test code to write bindings that can be checked by the schema validator.

Cc: Rob Herring robh+dt@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Signed-off-by: Stephen Boyd sboyd@kernel.org --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ed64e06ecca4..e50a78ec7344 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1331,6 +1331,8 @@ patternProperties: description: Terasic Inc. "^tesla,.*": description: Tesla, Inc. + "^test,.*": + description: Reserved for use by tests. For example, KUnit. "^tfc,.*": description: Three Five Corp "^thead,.*":

Describe a binding for an empty device node used by KUnit tests to confirm overlays load properly.

Cc: Rob Herring robh+dt@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Cc: Brendan Higgins brendan.higgins@linux.dev Cc: David Gow davidgow@google.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- .../devicetree/bindings/test/test,empty.yaml | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/test/test,empty.yaml

diff --git a/Documentation/devicetree/bindings/test/test,empty.yaml b/Documentation/devicetree/bindings/test/test,empty.yaml new file mode 100644 index 000000000000..20dc83b15bbf --- /dev/null +++ b/Documentation/devicetree/bindings/test/test,empty.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/test/test,empty.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Empty node + +maintainers: + - David Gow davidgow@google.com + - Brendan Higgins brendanhiggins@google.com + +description: + An empty node to confirm tests can load device tree overlays. + +properties: + compatible: + const: test,empty + +required: + - compatible + +additionalProperties: false + +examples: + - | + kunit-node { + compatible = "test,empty"; + }; +...

Test the KUnit test managed overlay APIs. Confirm that platform devices are created and destroyed properly. This provides us confidence that the test managed work correctly and can be relied upon to provide tests with fake platform devices and device nodes via overlays compiled into the kernel image.

Cc: Rob Herring robh+dt@kernel.org Cc: Frank Rowand frowand.list@gmail.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- drivers/of/.kunitconfig | 2 + drivers/of/Kconfig | 10 +++ drivers/of/Makefile | 1 + drivers/of/kunit_overlay_test.dtso | 9 +++ drivers/of/overlay_test.c | 110 +++++++++++++++++++++++++++++ 5 files changed, 132 insertions(+) create mode 100644 drivers/of/kunit_overlay_test.dtso create mode 100644 drivers/of/overlay_test.c

diff --git a/drivers/of/.kunitconfig b/drivers/of/.kunitconfig index 5a8fee11978c..7d570cb922a1 100644 --- a/drivers/of/.kunitconfig +++ b/drivers/of/.kunitconfig @@ -1,3 +1,5 @@ CONFIG_KUNIT=y CONFIG_OF=y CONFIG_OF_KUNIT_TEST=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_OVERLAY_KUNIT_TEST=y diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 1b995cecf5be..5bdeba11268d 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -113,6 +113,16 @@ config OF_OVERLAY While this option is selected automatically when needed, you can enable it manually to improve device tree unit test coverage.

+config OF_OVERLAY_KUNIT_TEST + tristate "Device Tree overlay KUnit tests" if !KUNIT_ALL_TESTS + depends on OF_OVERLAY + depends on KUNIT + default KUNIT_ALL_TESTS + help + This option builds KUnit unit tests for the device tree overlay code. + + If unsure, say N here, but this option is safe to enable. + config OF_NUMA bool

diff --git a/drivers/of/Makefile b/drivers/of/Makefile index c694f998b9f5..2ad60d5b87ac 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -21,5 +21,6 @@ endif

obj-$(CONFIG_KUNIT) += of_kunit.o obj-$(CONFIG_OF_KUNIT_TEST) += of_test.o +obj-$(CONFIG_OF_OVERLAY_KUNIT_TEST) += overlay_test.o kunit_overlay_test.dtbo.o

obj-$(CONFIG_OF_UNITTEST) += unittest-data/ diff --git a/drivers/of/kunit_overlay_test.dtso b/drivers/of/kunit_overlay_test.dtso new file mode 100644 index 000000000000..85f20b4b4c16 --- /dev/null +++ b/drivers/of/kunit_overlay_test.dtso @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +/plugin/; + +&{/} { + kunit-test { + compatible = "test,empty"; + }; +}; diff --git a/drivers/of/overlay_test.c b/drivers/of/overlay_test.c new file mode 100644 index 000000000000..66b1dceea568 --- /dev/null +++ b/drivers/of/overlay_test.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * KUnit tests for device tree overlays + */ +#include <linux/device/bus.h> +#include <linux/kconfig.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <kunit/of.h> +#include <kunit/test.h> + +static const char * const kunit_node_name = "kunit-test"; +static const char * const kunit_compatible = "test,empty"; + +/* Test that of_overlay_apply_kunit() adds a node to the live tree */ +static void of_overlay_apply_kunit_apply(struct kunit *test) +{ + struct device_node *np; + + KUNIT_ASSERT_EQ(test, 0, + of_overlay_apply_kunit(test, kunit_overlay_test)); + + np = of_find_node_by_name(NULL, kunit_node_name); + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, np); + of_node_put(np); +} + +static int bus_match_np(struct device *dev, const void *data) +{ + const struct device_node *np = data; + + return np == dev->of_node; +} + +/* + * Test that of_overlay_apply_kunit() creates platform devices with the + * expected device_node + */ +static void of_overlay_apply_kunit_platform_device(struct kunit *test) +{ + struct device *dev; + struct device_node *np; + + KUNIT_ASSERT_EQ(test, 0, + of_overlay_apply_kunit(test, kunit_overlay_test)); + + np = of_find_node_by_name(NULL, kunit_node_name); + of_node_put_kunit(test, np); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, np); + + dev = bus_find_device(&platform_bus_type, NULL, np, bus_match_np); + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, dev); + put_device(dev); +} + +static int of_overlay_bus_match_compatible(struct device *dev, const void *data) +{ + return of_device_is_compatible(dev->of_node, data); +} + +/* Test that of_overlay_apply_kunit() cleans up after the test is finished */ +static void of_overlay_apply_kunit_cleanup(struct kunit *test) +{ + struct device *dev; + struct device_node *np; + + KUNIT_ASSERT_EQ(test, 0, + of_overlay_apply_kunit(test, kunit_overlay_test)); + + np = of_find_node_by_name(NULL, kunit_node_name); + of_node_put(np); /* Not derefing 'np' after this */ + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, np); + + dev = bus_find_device(&platform_bus_type, NULL, np, bus_match_np); + put_device(dev); /* Not derefing 'device' after this */ + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev); + + /* Remove overlay */ + kunit_cleanup(test); + + np = of_find_node_by_name(NULL, kunit_node_name); + KUNIT_EXPECT_PTR_EQ(test, NULL, np); + of_node_put(np); + + dev = bus_find_device(&platform_bus_type, NULL, kunit_compatible, + of_overlay_bus_match_compatible); + KUNIT_EXPECT_PTR_EQ(test, NULL, dev); + put_device(dev); +} + +static struct kunit_case of_overlay_apply_kunit_test_cases[] = { + KUNIT_CASE(of_overlay_apply_kunit_apply), + KUNIT_CASE(of_overlay_apply_kunit_platform_device), + KUNIT_CASE(of_overlay_apply_kunit_cleanup), + {} +}; + +/* + * Test suite for test managed device tree overlays. + */ +static struct kunit_suite of_overlay_apply_kunit_suite = { + .name = "of_overlay_apply_kunit", + .test_cases = of_overlay_apply_kunit_test_cases, +}; + +kunit_test_suites( + &of_overlay_apply_kunit_suite, +); +MODULE_LICENSE("GPL");

Describe a binding for a device that consumes a fixed rate clk in DT so that a KUnit test can get the clk registered by of_fixed_clk_setup() and test that it is setup properly.

Cc: Rob Herring robh+dt@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Cc: Brendan Higgins brendan.higgins@linux.dev Cc: David Gow davidgow@google.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- .../bindings/test/test,clk-fixed-rate.yaml | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/test/test,clk-fixed-rate.yaml

diff --git a/Documentation/devicetree/bindings/test/test,clk-fixed-rate.yaml b/Documentation/devicetree/bindings/test/test,clk-fixed-rate.yaml new file mode 100644 index 000000000000..b9f58cba944c --- /dev/null +++ b/Documentation/devicetree/bindings/test/test,clk-fixed-rate.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/test/test,clk-fixed-rate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: KUnit clk fixed rate test clk consumer + +maintainers: + - Stephen Boyd sboyd@kernel.org + +description: + A clk consumer of a fixed rate clk used to test the fixed rate clk + implementation. + +properties: + compatible: + const: test,clk-fixed-rate + + clocks: + maxItems: 1 + +required: + - compatible + - clocks + +additionalProperties: false + +examples: + - | + clock-consumer { + compatible = "test,clk-fixed-rate"; + clocks = <&fixed_clk>; + }; +...

Unit tests are more ergonomic and simpler to understand if they don't have to hoist a bunch of code into the test harness init and exit functions. Add some test managed wrappers for the clk APIs so that clk unit tests can write more code in the actual test and less code in the harness.

Only add APIs that are used for now. More wrappers can be added in the future as necessary.

Cc: Brendan Higgins brendan.higgins@linux.dev Cc: David Gow davidgow@google.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- Documentation/dev-tools/kunit/api/clk.rst | 10 + Documentation/dev-tools/kunit/api/index.rst | 5 + drivers/clk/Makefile | 5 + drivers/clk/clk_kunit.c | 224 ++++++++++++++++++++ include/kunit/clk.h | 28 +++ 5 files changed, 272 insertions(+) create mode 100644 Documentation/dev-tools/kunit/api/clk.rst create mode 100644 drivers/clk/clk_kunit.c create mode 100644 include/kunit/clk.h

diff --git a/Documentation/dev-tools/kunit/api/clk.rst b/Documentation/dev-tools/kunit/api/clk.rst new file mode 100644 index 000000000000..badd87a35f9e --- /dev/null +++ b/Documentation/dev-tools/kunit/api/clk.rst @@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======== +Clk API +======== + +The KUnit clk API is used to test clk providers and clk consumers. + +.. kernel-doc:: drivers/clk/clk_kunit.c + :export: diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst index eb628cb2c72a..cbde5f8d40e2 100644 --- a/Documentation/dev-tools/kunit/api/index.rst +++ b/Documentation/dev-tools/kunit/api/index.rst @@ -9,6 +9,7 @@ API Reference test resource functionredirection + clk of platformdevice

@@ -34,6 +35,10 @@ Documentation/dev-tools/kunit/api/functionredirection.rst Driver KUnit API ================

+Documentation/dev-tools/kunit/api/clk.rst + + - Documents the KUnit clk API + Documentation/dev-tools/kunit/api/of.rst

- Documents the KUnit device tree (OF) API diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e3ca0d058a25..226b4b729703 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -17,6 +17,11 @@ ifeq ($(CONFIG_OF), y) obj-$(CONFIG_COMMON_CLK) += clk-conf.o endif

+# KUnit specific helpers +ifeq ($(CONFIG_COMMON_CLK), y) +obj-$(CONFIG_KUNIT) += clk_kunit.o +endif + # hardware specific clock types # please keep this section sorted lexicographically by file path name obj-$(CONFIG_COMMON_CLK_APPLE_NCO) += clk-apple-nco.o diff --git a/drivers/clk/clk_kunit.c b/drivers/clk/clk_kunit.c new file mode 100644 index 000000000000..bb9bf5a2617f --- /dev/null +++ b/drivers/clk/clk_kunit.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * KUnit helpers for clk providers and consumers + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +#include <kunit/clk.h> +#include <kunit/resource.h> + +static void clk_disable_unprepare_kunit(struct kunit_resource *res) +{ + struct clk *clk = res->data; + + clk_disable_unprepare(clk); +} + +/** + * clk_prepare_enable_kunit() - Test managed clk_prepare_enable() + * @test: The test context + * @clk: clk to prepare and enable + * + * Returns: 0 on success, or negative errno on failure. + */ +int clk_prepare_enable_kunit(struct kunit *test, struct clk *clk) +{ + if (!kunit_alloc_resource(test, NULL, clk_disable_unprepare_kunit, + GFP_KERNEL, clk)) + return -EINVAL; + + return clk_prepare_enable(clk); +} +EXPORT_SYMBOL_GPL(clk_prepare_enable_kunit); + +static void clk_put_kunit(struct kunit_resource *res) +{ + struct clk *clk = res->data; + + clk_put(clk); +} + +static struct clk *__clk_get_kunit(struct kunit *test, struct clk *clk) +{ + if (IS_ERR(clk)) + return clk; + + if (!kunit_alloc_resource(test, NULL, clk_put_kunit, GFP_KERNEL, clk)) { + clk_put(clk); + return ERR_PTR(-EINVAL); + } + + return clk; +} + +/** + * clk_get_kunit() - Test managed clk_get() + * @test: The test context + * @dev: device for clock "consumer" + * @con_id: clock consumer ID + * + * Just like clk_get(), except the clk is managed by the test case and is + * automatically put with clk_put() after the test case concludes. + * + * Returns: new clk consumer or ERR_PTR on failure. + */ +struct clk * +clk_get_kunit(struct kunit *test, struct device *dev, const char *con_id) +{ + struct clk *clk; + + clk = clk_get(dev, con_id); + + return __clk_get_kunit(test, clk); +} +EXPORT_SYMBOL_GPL(clk_get_kunit); + +/** + * of_clk_get_kunit() - Test managed of_clk_get() + * @test: The test context + * @np: device_node for clock "consumer" + * @index: index in 'clocks' property of @np + * + * Just like of_clk_get(), except the clk is managed by the test case and is + * automatically put with clk_put() after the test case concludes. + * + * Returns: new clk consumer or ERR_PTR on failure. + */ +struct clk * +of_clk_get_kunit(struct kunit *test, struct device_node *np, int index) +{ + struct clk *clk; + + clk = of_clk_get(np, index); + + return __clk_get_kunit(test, clk); +} +EXPORT_SYMBOL_GPL(of_clk_get_kunit); + +/** + * clk_hw_get_clk_kunit() - Test managed clk_hw_get_clk() + * @test: The test context + * @hw: clk_hw associated with the clk being consumed + * @con_id: connection ID string on device + * + * Just like clk_hw_get_clk(), except the clk is managed by the test case and + * is automatically put with clk_put() after the test case concludes. + * + * Returns: new clk consumer or ERR_PTR on failure. + */ +struct clk * +clk_hw_get_clk_kunit(struct kunit *test, struct clk_hw *hw, const char *con_id) +{ + struct clk *clk; + + clk = clk_hw_get_clk(hw, con_id); + + return __clk_get_kunit(test, clk); +} +EXPORT_SYMBOL_GPL(clk_hw_get_clk_kunit); + +/** + * clk_hw_get_clk_prepared_enabled_kunit() - Test managed clk_hw_get_clk() + clk_prepare_enable() + * @test: The test context + * @hw: clk_hw associated with the clk being consumed + * @con_id: connection ID string on device + * + * Just like + * + * .. code-block:: c + * + * struct clk *clk = clk_hw_get_clk(...); + * clk_prepare_enable(clk); + * + * except the clk is managed by the test case and is automatically disabled and + * unprepared with clk_disable_unprepare() and put with clk_put() after the + * test case concludes. + * + * Returns: new clk consumer that is prepared and enabled or ERR_PTR on failure. + */ +struct clk * +clk_hw_get_clk_prepared_enabled_kunit(struct kunit *test, struct clk_hw *hw, + const char *con_id) +{ + int ret; + struct clk *clk; + + clk = clk_hw_get_clk_kunit(test, hw, con_id); + if (IS_ERR(clk)) + return clk; + + ret = clk_prepare_enable_kunit(test, clk); + if (ret) + return ERR_PTR(ret); + + return clk; +} +EXPORT_SYMBOL_GPL(clk_hw_get_clk_prepared_enabled_kunit); + +static void clk_hw_unregister_kunit(struct kunit_resource *res) +{ + struct clk_hw *hw = res->data; + + clk_hw_unregister(hw); +} + +static int __clk_hw_register_kunit(struct kunit *test, struct clk_hw *hw) +{ + if (!kunit_alloc_resource(test, NULL, clk_hw_unregister_kunit, GFP_KERNEL, hw)) { + clk_hw_unregister(hw); + return -EINVAL; + } + + return 0; +} + +/** + * clk_hw_register_kunit() - Test managed clk_hw_register() + * @test: The test context + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * Just like clk_hw_register(), except the clk registration is managed by the + * test case and is automatically unregistered after the test case concludes. + * + * Returns: 0 on success or a negative errno value on failure. + */ +int clk_hw_register_kunit(struct kunit *test, struct device *dev, struct clk_hw *hw) +{ + int ret; + + ret = clk_hw_register(dev, hw); + if (ret) + return ret; + + return __clk_hw_register_kunit(test, hw); +} +EXPORT_SYMBOL_GPL(clk_hw_register_kunit); + +/** + * of_clk_hw_register_kunit() - Test managed of_clk_hw_register() + * @test: The test context + * @node: device_node of device that is registering this clock + * @hw: link to hardware-specific clock data + * + * Just like of_clk_hw_register(), except the clk registration is managed by + * the test case and is automatically unregistered after the test case + * concludes. + * + * Returns: 0 on success or a negative errno value on failure. + */ +int of_clk_hw_register_kunit(struct kunit *test, struct device_node *node, struct clk_hw *hw) +{ + int ret; + + ret = of_clk_hw_register(node, hw); + if (ret) + return ret; + + return __clk_hw_register_kunit(test, hw); +} +EXPORT_SYMBOL_GPL(of_clk_hw_register_kunit); diff --git a/include/kunit/clk.h b/include/kunit/clk.h new file mode 100644 index 000000000000..73bc99cefe7b --- /dev/null +++ b/include/kunit/clk.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _CLK_KUNIT_H +#define _CLK_KUNIT_H + +struct clk; +struct clk_hw; +struct device; +struct device_node; +struct kunit; + +struct clk * +clk_get_kunit(struct kunit *test, struct device *dev, const char *con_id); +struct clk * +of_clk_get_kunit(struct kunit *test, struct device_node *np, int index); + +struct clk * +clk_hw_get_clk_kunit(struct kunit *test, struct clk_hw *hw, const char *con_id); +struct clk * +clk_hw_get_clk_prepared_enabled_kunit(struct kunit *test, struct clk_hw *hw, + const char *con_id); + +int clk_prepare_enable_kunit(struct kunit *test, struct clk *clk); + +int clk_hw_register_kunit(struct kunit *test, struct device *dev, struct clk_hw *hw); +int of_clk_hw_register_kunit(struct kunit *test, struct device_node *node, + struct clk_hw *hw); + +#endif

Describe a binding for a device that provides and consumes clks in DT so that a KUnit test can register clks based on the device node and test clk_hw_register() with clk_parent_data.

Cc: Rob Herring robh+dt@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org Cc: Brendan Higgins brendan.higgins@linux.dev Cc: David Gow davidgow@google.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- .../bindings/clock/test,clk-parent-data.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/test,clk-parent-data.yaml

diff --git a/Documentation/devicetree/bindings/clock/test,clk-parent-data.yaml b/Documentation/devicetree/bindings/clock/test,clk-parent-data.yaml new file mode 100644 index 000000000000..a2f927526405 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/test,clk-parent-data.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/test,clk-parent-data.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fake clk provider for clk_parent_data unit tests + +maintainers: + - Stephen Boyd sboyd@kernel.org + +description: + A clk provider to test the struct clk_parent_data implementation in the Linux + kernel. + +properties: + compatible: + const: test,clk-parent-data + + clocks: + items: + - description: Fixed parent + - description: 50 MHz fixed parent + + clock-names: + items: + - const: parent_fwname + - const: "50" + + "#clock-cells": + const: 1 + +required: + - compatible + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "test,clk-parent-data"; + #clock-cells = <1>; + clocks = <&fixed_parent>, <&fixed_50MHz>; + clock-names = "parent_fwname", "50"; + }; +...

Test that clks registered with 'struct clk_parent_data' work as intended and can find their parents.

Cc: Christian Marangi ansuelsmth@gmail.com Cc: Brendan Higgins brendan.higgins@linux.dev Cc: David Gow davidgow@google.com Signed-off-by: Stephen Boyd sboyd@kernel.org --- drivers/clk/Makefile | 3 +- drivers/clk/clk_parent_data_test.h | 10 + drivers/clk/clk_test.c | 459 +++++++++++++++++++- drivers/clk/kunit_clk_parent_data_test.dtso | 28 ++ 4 files changed, 498 insertions(+), 2 deletions(-) create mode 100644 drivers/clk/clk_parent_data_test.h create mode 100644 drivers/clk/kunit_clk_parent_data_test.dtso

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 4fb809f4bd95..2697bdec1c46 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -2,7 +2,8 @@ # common clock types obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o -obj-$(CONFIG_CLK_KUNIT_TEST) += clk_test.o +obj-$(CONFIG_CLK_KUNIT_TEST) += clk_test.o \ + kunit_clk_parent_data_test.dtbo.o obj-$(CONFIG_COMMON_CLK) += clk-divider.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o diff --git a/drivers/clk/clk_parent_data_test.h b/drivers/clk/clk_parent_data_test.h new file mode 100644 index 000000000000..eedd53ae910d --- /dev/null +++ b/drivers/clk/clk_parent_data_test.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _CLK_PARENT_DATA_TEST_H +#define _CLK_PARENT_DATA_TEST_H + +#define CLK_PARENT_DATA_1MHZ_NAME "1mhz_fixed_legacy" +#define CLK_PARENT_DATA_PARENT1 "parent_fwname" +#define CLK_PARENT_DATA_PARENT2 "50" +#define CLK_PARENT_DATA_50MHZ_NAME "50_clk" + +#endif diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c index f9a5c2964c65..60c6a47f9c68 100644 --- a/drivers/clk/clk_test.c +++ b/drivers/clk/clk_test.c @@ -4,12 +4,19 @@ */ #include <linux/clk.h> #include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h>

/* Needed for clk_hw_get_clk() */ #include "clk.h"

+#include <kunit/clk.h> +#include <kunit/of.h> +#include <kunit/platform_device.h> #include <kunit/test.h>

+#include "clk_parent_data_test.h" + #define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000) #define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000) #define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000) @@ -2394,6 +2401,454 @@ static struct kunit_suite clk_mux_notifier_test_suite = { .test_cases = clk_mux_notifier_test_cases, };

+struct clk_register_clk_parent_data_test_case { + const char *desc; + struct clk_parent_data pdata; +}; + +static void +clk_register_clk_parent_data_test_case_to_desc( + const struct clk_register_clk_parent_data_test_case *t, char *desc) +{ + strcpy(desc, t->desc); +} + +static const struct clk_register_clk_parent_data_test_case +clk_register_clk_parent_data_of_cases[] = { + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct clk_parent_data::index. + */ + .desc = "clk_parent_data_of_index_test", + .pdata.index = 0, + }, + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct clk_parent_data::fwname. + */ + .desc = "clk_parent_data_of_fwname_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT1, + }, + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct clk_parent_data::name. + */ + .desc = "clk_parent_data_of_name_test", + /* The index must be negative to indicate firmware not used */ + .pdata.index = -1, + .pdata.name = CLK_PARENT_DATA_1MHZ_NAME, + }, + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct + * clk_parent_data::{fw_name,name}. + */ + .desc = "clk_parent_data_of_fwname_name_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT1, + .pdata.name = "not_matching", + }, + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct clk_parent_data::{index,name}. + * Index takes priority. + */ + .desc = "clk_parent_data_of_index_name_priority_test", + .pdata.index = 0, + .pdata.name = "not_matching", + }, + { + /* + * Test that a clk registered with a struct device_node can + * find a parent based on struct + * clk_parent_data::{index,fwname,name}. The fw_name takes + * priority over index and name. + */ + .desc = "clk_parent_data_of_index_fwname_name_priority_test", + .pdata.index = 1, + .pdata.fw_name = CLK_PARENT_DATA_PARENT1, + .pdata.name = "not_matching", + }, +}; + +KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_of_test, clk_register_clk_parent_data_of_cases, + clk_register_clk_parent_data_test_case_to_desc) + +/** + * struct clk_register_clk_parent_data_of_ctx - Context for clk_parent_data OF tests + * @np: device node of clk under test + * @hw: clk_hw for clk under test + */ +struct clk_register_clk_parent_data_of_ctx { + struct device_node *np; + struct clk_hw hw; +}; + +static int clk_register_clk_parent_data_of_test_init(struct kunit *test) +{ + struct clk_register_clk_parent_data_of_ctx *ctx; + + KUNIT_ASSERT_EQ(test, 0, + of_overlay_apply_kunit(test, kunit_clk_parent_data_test)); + + ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + test->priv = ctx; + + ctx->np = of_find_compatible_node(NULL, NULL, "test,clk-parent-data"); + if (!ctx->np) + return -ENODEV; + + return 0; +} + +static void clk_register_clk_parent_data_of_test_exit(struct kunit *test) +{ + struct clk_register_clk_parent_data_of_ctx *ctx = test->priv; + + of_node_put(ctx->np); +} + +/* + * Test that a clk registered with a struct device_node can find a parent based on + * struct clk_parent_data when the hw member isn't set. + */ +static void clk_register_clk_parent_data_of_test(struct kunit *test) +{ + struct clk_register_clk_parent_data_of_ctx *ctx = test->priv; + struct clk_hw *parent_hw; + const struct clk_register_clk_parent_data_test_case *test_param; + struct clk_init_data init = { }; + struct clk *expected_parent, *actual_parent; + + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->np); + + expected_parent = of_clk_get_kunit(test, ctx->np, 0); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, expected_parent); + + test_param = test->param_value; + init.parent_data = &test_param->pdata; + init.num_parents = 1; + init.name = "parent_data_of_test_clk"; + init.ops = &clk_dummy_single_parent_ops; + ctx->hw.init = &init; + KUNIT_ASSERT_EQ(test, 0, of_clk_hw_register_kunit(test, ctx->np, &ctx->hw)); + + parent_hw = clk_hw_get_parent(&ctx->hw); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent_hw); + + actual_parent = clk_hw_get_clk_kunit(test, parent_hw, __func__); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, actual_parent); + + KUNIT_EXPECT_TRUE(test, clk_is_match(expected_parent, actual_parent)); +} + +static struct kunit_case clk_register_clk_parent_data_of_test_cases[] = { + KUNIT_CASE_PARAM(clk_register_clk_parent_data_of_test, + clk_register_clk_parent_data_of_test_gen_params), + {} +}; + +/* + * Test suite for registering clks with struct clk_parent_data and a struct + * device_node. + */ +static struct kunit_suite clk_register_clk_parent_data_of_suite = { + .name = "clk_register_clk_parent_data_of", + .init = clk_register_clk_parent_data_of_test_init, + .exit = clk_register_clk_parent_data_of_test_exit, + .test_cases = clk_register_clk_parent_data_of_test_cases, +}; + +/** + * struct clk_register_clk_parent_data_device_ctx - Context for clk_parent_data device tests + * @dev: device of clk under test + * @hw: clk_hw for clk under test + * @pdrv: driver to attach to find @dev + */ +struct clk_register_clk_parent_data_device_ctx { + struct device *dev; + struct clk_hw hw; + struct platform_driver pdrv; +}; + +static inline struct clk_register_clk_parent_data_device_ctx * +clk_register_clk_parent_data_driver_to_test_context(struct platform_device *pdev) +{ + return container_of(to_platform_driver(pdev->dev.driver), + struct clk_register_clk_parent_data_device_ctx, pdrv); +} + +static int clk_register_clk_parent_data_device_probe(struct platform_device *pdev) +{ + struct clk_register_clk_parent_data_device_ctx *ctx; + + ctx = clk_register_clk_parent_data_driver_to_test_context(pdev); + ctx->dev = &pdev->dev; + + return 0; +} + +static void clk_register_clk_parent_data_device_driver(struct kunit *test) +{ + struct clk_register_clk_parent_data_device_ctx *ctx = test->priv; + static const struct of_device_id match_table[] = { + { .compatible = "test,clk-parent-data" }, + { } + }; + + ctx->pdrv.probe = clk_register_clk_parent_data_device_probe; + ctx->pdrv.driver.of_match_table = match_table; + ctx->pdrv.driver.name = __func__; + ctx->pdrv.driver.owner = THIS_MODULE; + + KUNIT_ASSERT_EQ(test, 0, platform_driver_register_kunit(test, &ctx->pdrv)); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->dev); +} + +static const struct clk_register_clk_parent_data_test_case +clk_register_clk_parent_data_device_cases[] = { + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::index. + */ + .desc = "clk_parent_data_device_index_test", + .pdata.index = 1, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::fwname. + */ + .desc = "clk_parent_data_device_fwname_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::name. + */ + .desc = "clk_parent_data_device_name_test", + /* The index must be negative to indicate firmware not used */ + .pdata.index = -1, + .pdata.name = CLK_PARENT_DATA_50MHZ_NAME, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::{fw_name,name}. + */ + .desc = "clk_parent_data_device_fwname_name_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + .pdata.name = "not_matching", + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::{index,name}. Index + * takes priority. + */ + .desc = "clk_parent_data_device_index_name_priority_test", + .pdata.index = 1, + .pdata.name = "not_matching", + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::{index,fwname,name}. + * The fw_name takes priority over index and name. + */ + .desc = "clk_parent_data_device_index_fwname_name_priority_test", + .pdata.index = 0, + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + .pdata.name = "not_matching", + }, +}; + +KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_device_test, + clk_register_clk_parent_data_device_cases, + clk_register_clk_parent_data_test_case_to_desc) + +/* + * Test that a clk registered with a struct device can find a parent based on + * struct clk_parent_data when the hw member isn't set. + */ +static void clk_register_clk_parent_data_device_test(struct kunit *test) +{ + struct clk_register_clk_parent_data_device_ctx *ctx; + const struct clk_register_clk_parent_data_test_case *test_param; + struct clk_hw *parent_hw; + struct clk_init_data init = { }; + struct clk *expected_parent, *actual_parent; + + ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + test->priv = ctx; + + clk_register_clk_parent_data_device_driver(test); + + expected_parent = clk_get_kunit(test, ctx->dev, "50"); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, expected_parent); + + test_param = test->param_value; + init.parent_data = &test_param->pdata; + init.num_parents = 1; + init.name = "parent_data_device_test_clk"; + init.ops = &clk_dummy_single_parent_ops; + ctx->hw.init = &init; + KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, &ctx->hw)); + + parent_hw = clk_hw_get_parent(&ctx->hw); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent_hw); + + actual_parent = clk_hw_get_clk_kunit(test, parent_hw, __func__); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, actual_parent); + + KUNIT_EXPECT_TRUE(test, clk_is_match(expected_parent, actual_parent)); +} + +static const struct clk_register_clk_parent_data_test_case +clk_register_clk_parent_data_device_hw_cases[] = { + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw. + */ + .desc = "clk_parent_data_device_hw_index_test", + /* The index must be negative to indicate firmware not used */ + .pdata.index = -1, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw when + * struct clk_parent_data::fw_name is set. + */ + .desc = "clk_parent_data_device_hw_fwname_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw when struct + * clk_parent_data::name is set. + */ + .desc = "clk_parent_data_device_hw_name_test", + /* The index must be negative to indicate firmware not used */ + .pdata.index = -1, + .pdata.name = CLK_PARENT_DATA_50MHZ_NAME, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw when struct + * clk_parent_data::{fw_name,name} are set. + */ + .desc = "clk_parent_data_device_hw_fwname_name_test", + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + .pdata.name = "not_matching", + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw when struct + * clk_parent_data::index is set. The hw pointer takes + * priority. + */ + .desc = "clk_parent_data_device_hw_index_priority_test", + .pdata.index = 0, + }, + { + /* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw when + * struct clk_parent_data::{index,fwname,name} are set. + * The hw pointer takes priority over everything else. + */ + .desc = "clk_parent_data_device_hw_index_fwname_name_priority_test", + .pdata.index = 0, + .pdata.fw_name = CLK_PARENT_DATA_PARENT2, + .pdata.name = "not_matching", + }, +}; + +KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_device_hw_test, + clk_register_clk_parent_data_device_hw_cases, + clk_register_clk_parent_data_test_case_to_desc) + +/* + * Test that a clk registered with a struct device can find a + * parent based on struct clk_parent_data::hw. + */ +static void clk_register_clk_parent_data_device_hw_test(struct kunit *test) +{ + struct clk_register_clk_parent_data_device_ctx *ctx; + const struct clk_register_clk_parent_data_test_case *test_param; + struct clk_dummy_context *parent; + struct clk_hw *parent_hw; + struct clk_parent_data pdata = { }; + struct clk_init_data init = { }; + + ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + test->priv = ctx; + + clk_register_clk_parent_data_device_driver(test); + + parent = kunit_kzalloc(test, sizeof(*parent), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); + + parent_hw = &parent->hw; + parent_hw->init = CLK_HW_INIT_NO_PARENT("parent-clk", + &clk_dummy_rate_ops, 0); + + KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, parent_hw)); + + test_param = test->param_value; + memcpy(&pdata, &test_param->pdata, sizeof(pdata)); + pdata.hw = parent_hw; + init.parent_data = &pdata; + init.num_parents = 1; + init.ops = &clk_dummy_single_parent_ops; + init.name = "parent_data_device_hw_test_clk"; + ctx->hw.init = &init; + KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, &ctx->hw)); + + KUNIT_EXPECT_PTR_EQ(test, parent_hw, clk_hw_get_parent(&ctx->hw)); +} + +static struct kunit_case clk_register_clk_parent_data_device_test_cases[] = { + KUNIT_CASE_PARAM(clk_register_clk_parent_data_device_test, + clk_register_clk_parent_data_device_test_gen_params), + KUNIT_CASE_PARAM(clk_register_clk_parent_data_device_hw_test, + clk_register_clk_parent_data_device_hw_test_gen_params), + {} +}; + +static int clk_register_clk_parent_data_device_init(struct kunit *test) +{ + KUNIT_ASSERT_EQ(test, 0, + of_overlay_apply_kunit(test, kunit_clk_parent_data_test)); + + return 0; +} + +/* + * Test suite for registering clks with struct clk_parent_data and a struct + * device. + */ +static struct kunit_suite clk_register_clk_parent_data_device_suite = { + .name = "clk_register_clk_parent_data_device", + .init = clk_register_clk_parent_data_device_init, + .test_cases = clk_register_clk_parent_data_device_test_cases, +}; + kunit_test_suites( &clk_leaf_mux_set_rate_parent_test_suite, &clk_test_suite, @@ -2405,7 +2860,9 @@ kunit_test_suites( &clk_range_test_suite, &clk_range_maximize_test_suite, &clk_range_minimize_test_suite, + &clk_register_clk_parent_data_of_suite, + &clk_register_clk_parent_data_device_suite, &clk_single_parent_mux_test_suite, - &clk_uncached_test_suite + &clk_uncached_test_suite, ); MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/kunit_clk_parent_data_test.dtso b/drivers/clk/kunit_clk_parent_data_test.dtso new file mode 100644 index 000000000000..7d3ed9a5a2e8 --- /dev/null +++ b/drivers/clk/kunit_clk_parent_data_test.dtso @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +/plugin/; + +#include "clk_parent_data_test.h" + +&{/} { + fixed_50: kunit-clock-50MHz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = CLK_PARENT_DATA_50MHZ_NAME; + }; + + fixed_parent: kunit-clock-1MHz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = CLK_PARENT_DATA_1MHZ_NAME; + }; + + kunit-clock-controller { + compatible = "test,clk-parent-data"; + clocks = <&fixed_parent>, <&fixed_50>; + clock-names = CLK_PARENT_DATA_PARENT1, CLK_PARENT_DATA_PARENT2; + #clock-cells = <1>; + }; +};