The OVS module can operate in conjunction with various types of tunnel ports. These are created as either explicit tunnel vport types, OR by creating a tunnel interface which acts as an anchor for the lightweight tunnel support.

This patch adds the ability to add tunnel ports to an OVS datapath for testing various scenarios with tunnel ports. With this addition, the vswitch "plumbing" will at least be able to push packets around using the tunnel vports. Future patches will add support for setting required tunnel metadata for lwts in the datapath. The end goal will be to push packets via these tunnels, and will be used in an upcoming commit for testing the path MTU.

Reviewed-by: Simon Horman horms@kernel.org Tested-by: Simon Horman horms@kernel.org Signed-off-by: Aaron Conole aconole@redhat.com --- .../selftests/net/openvswitch/ovs-dpctl.py | 81 +++++++++++++++++-- 1 file changed, 75 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 1dd057afd3fb..8f92215303a3 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -10,6 +10,7 @@ import ipaddress import logging import multiprocessing import re +import socket import struct import sys import time @@ -29,6 +30,7 @@ try: from pyroute2.netlink.exceptions import NetlinkError from pyroute2.netlink.generic import GenericNetlinkSocket import pyroute2 + import pyroute2.iproute

except ModuleNotFoundError: print("Need to install the python pyroute2 package >= 0.6.") @@ -1617,7 +1619,7 @@ class OvsVport(GenericNetlinkSocket): ("OVS_VPORT_ATTR_PORT_NO", "uint32"), ("OVS_VPORT_ATTR_TYPE", "uint32"), ("OVS_VPORT_ATTR_NAME", "asciiz"), - ("OVS_VPORT_ATTR_OPTIONS", "none"), + ("OVS_VPORT_ATTR_OPTIONS", "vportopts"), ("OVS_VPORT_ATTR_UPCALL_PID", "array(uint32)"), ("OVS_VPORT_ATTR_STATS", "vportstats"), ("OVS_VPORT_ATTR_PAD", "none"), @@ -1625,6 +1627,13 @@ class OvsVport(GenericNetlinkSocket): ("OVS_VPORT_ATTR_NETNSID", "uint32"), )

+ class vportopts(nla): + nla_map = ( + ("OVS_TUNNEL_ATTR_UNSPEC", "none"), + ("OVS_TUNNEL_ATTR_DST_PORT", "uint16"), + ("OVS_TUNNEL_ATTR_EXTENSION", "none"), + ) + class vportstats(nla): fields = ( ("rx_packets", "=Q"), @@ -1693,7 +1702,7 @@ class OvsVport(GenericNetlinkSocket): raise ne return reply

- def attach(self, dpindex, vport_ifname, ptype): + def attach(self, dpindex, vport_ifname, ptype, dport, lwt): msg = OvsVport.ovs_vport_msg()

msg["cmd"] = OVS_VPORT_CMD_NEW @@ -1702,12 +1711,43 @@ class OvsVport(GenericNetlinkSocket): msg["dpifindex"] = dpindex port_type = OvsVport.str_to_type(ptype)

- msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) msg["attrs"].append(["OVS_VPORT_ATTR_NAME", vport_ifname]) msg["attrs"].append( ["OVS_VPORT_ATTR_UPCALL_PID", [self.upcall_packet.epid]] )

+ TUNNEL_DEFAULTS = [("geneve", 6081), + ("vxlan", 4789)] + + for tnl in TUNNEL_DEFAULTS: + if ptype == tnl[0]: + if not dport: + dport = tnl[1] + + if not lwt: + vportopt = OvsVport.ovs_vport_msg.vportopts() + vportopt["attrs"].append( + ["OVS_TUNNEL_ATTR_DST_PORT", socket.htons(dport)] + ) + msg["attrs"].append( + ["OVS_VPORT_ATTR_OPTIONS", vportopt] + ) + else: + port_type = OvsVport.OVS_VPORT_TYPE_NETDEV + ipr = pyroute2.iproute.IPRoute() + + if tnl[0] == "geneve": + ipr.link("add", ifname=vport_ifname, kind=tnl[0], + geneve_port=dport, + geneve_collect_metadata=True, + geneve_udp_zero_csum6_rx=1) + elif tnl[0] == "vxlan": + ipr.link("add", ifname=vport_ifname, kind=tnl[0], + vxlan_learning=0, vxlan_collect_metadata=1, + vxlan_udp_zero_csum6_rx=1, vxlan_port=dport) + break + msg["attrs"].append(["OVS_VPORT_ATTR_TYPE", port_type]) + try: reply = self.nlm_request( msg, msg_type=self.prid, msg_flags=NLM_F_REQUEST | NLM_F_ACK @@ -2053,12 +2093,19 @@ def print_ovsdp_full(dp_lookup_rep, ifindex, ndb=NDB(), vpl=OvsVport()): for iface in ndb.interfaces: rep = vpl.info(iface.ifname, ifindex) if rep is not None: + opts = "" + vpo = rep.get_attr("OVS_VPORT_ATTR_OPTIONS") + if vpo: + dpo = vpo.get_attr("OVS_TUNNEL_ATTR_DST_PORT") + if dpo: + opts += " tnl-dport:%s" % socket.ntohs(dpo) print( - " port %d: %s (%s)" + " port %d: %s (%s%s)" % ( rep.get_attr("OVS_VPORT_ATTR_PORT_NO"), rep.get_attr("OVS_VPORT_ATTR_NAME"), OvsVport.type_to_str(rep.get_attr("OVS_VPORT_ATTR_TYPE")), + opts, ) )

@@ -2120,12 +2167,30 @@ def main(argv): "--ptype", type=str, default="netdev", - choices=["netdev", "internal"], + choices=["netdev", "internal", "geneve", "vxlan"], help="Interface type (default netdev)", ) + addifcmd.add_argument( + "-p", + "--dport", + type=int, + default=0, + help="Destination port (0 for default)" + ) + addifcmd.add_argument( + "-l", + "--lwt", + type=bool, + default=True, + help="Use LWT infrastructure instead of vport (default true)." + ) delifcmd = subparsers.add_parser("del-if") delifcmd.add_argument("dpname", help="Datapath Name") delifcmd.add_argument("delif", help="Interface name for adding") + delifcmd.add_argument("-d", + "--dellink", + type=bool, default=False, + help="Delete the link as well.")

dumpflcmd = subparsers.add_parser("dump-flows") dumpflcmd.add_argument("dumpdp", help="Datapath Name") @@ -2186,7 +2251,8 @@ def main(argv): print("DP '%s' not found." % args.dpname) return 1 dpindex = rep["dpifindex"] - rep = ovsvp.attach(rep["dpifindex"], args.addif, args.ptype) + rep = ovsvp.attach(rep["dpifindex"], args.addif, args.ptype, + args.dport, args.lwt) msg = "vport '%s'" % args.addif if rep and rep["header"]["error"] is None: msg += " added." @@ -2207,6 +2273,9 @@ def main(argv): msg += " removed." else: msg += " failed to remove." + if args.dellink: + ipr = pyroute2.iproute.IPRoute() + ipr.link("del", index=ipr.link_lookup(ifname=args.delif)[0]) elif hasattr(args, "dumpdp"): rep = ovsdp.info(args.dumpdp, 0) if rep is None:

These will be used in upcoming commits to set specific attributes for interacting with tunnels. Since set() will use the key parsing routine, we also make sure to prepend it with an open paren, for the action parsing to properly understand it.

Reviewed-by: Simon Horman horms@kernel.org Tested-by: Simon Horman horms@kernel.org Signed-off-by: Aaron Conole aconole@redhat.com --- .../selftests/net/openvswitch/ovs-dpctl.py | 37 +++++++++++++++++-- 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 4db20b38b481..4c235ff07aeb 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -284,7 +284,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_UNSPEC", "none"), ("OVS_ACTION_ATTR_OUTPUT", "uint32"), ("OVS_ACTION_ATTR_USERSPACE", "userspace"), - ("OVS_ACTION_ATTR_SET", "none"), + ("OVS_ACTION_ATTR_SET", "ovskey"), ("OVS_ACTION_ATTR_PUSH_VLAN", "none"), ("OVS_ACTION_ATTR_POP_VLAN", "flag"), ("OVS_ACTION_ATTR_SAMPLE", "none"), @@ -292,7 +292,7 @@ class ovsactions(nla): ("OVS_ACTION_ATTR_HASH", "none"), ("OVS_ACTION_ATTR_PUSH_MPLS", "none"), ("OVS_ACTION_ATTR_POP_MPLS", "flag"), - ("OVS_ACTION_ATTR_SET_MASKED", "none"), + ("OVS_ACTION_ATTR_SET_MASKED", "ovskey"), ("OVS_ACTION_ATTR_CT", "ctact"), ("OVS_ACTION_ATTR_TRUNC", "uint32"), ("OVS_ACTION_ATTR_PUSH_ETH", "none"), @@ -469,6 +469,18 @@ class ovsactions(nla): print_str += "clone(" print_str += datum.dpstr(more) print_str += ")" + elif field[0] == "OVS_ACTION_ATTR_SET" or \ + field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "set" + field = datum + mask = None + if field[0] == "OVS_ACTION_ATTR_SET_MASKED": + print_str += "_masked" + field = datum[0] + mask = datum[1] + print_str += "(" + print_str += field.dpstr(mask, more) + print_str += ")" else: try: print_str += datum.dpstr(more) @@ -547,6 +559,25 @@ class ovsactions(nla): self["attrs"].append(("OVS_ACTION_ATTR_CLONE", subacts)) actstr = actstr[parsedLen:] parsed = True + elif parse_starts_block(actstr, "set(", False): + parencount += 1 + k = ovskey() + actstr = actstr[len("set("):] + actstr = k.parse(actstr, None) + self["attrs"].append(("OVS_ACTION_ATTR_SET", k)) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True + elif parse_starts_block(actstr, "set_masked(", False): + parencount += 1 + k = ovskey() + m = ovskey() + actstr = actstr[len("set_masked("):] + actstr = k.parse(actstr, m) + self["attrs"].append(("OVS_ACTION_ATTR_SET_MASKED", [k, m])) + if not actstr.startswith(")"): + actstr = ")" + actstr + parsed = True elif parse_starts_block(actstr, "ct(", False): parencount += 1 actstr = actstr[len("ct(") :] @@ -1312,7 +1343,7 @@ class ovskey(nla): mask["attrs"].append([field[0], m]) self["attrs"].append([field[0], k])

- flowstr = flowstr[strspn(flowstr, "),") :] + flowstr = flowstr[strspn(flowstr, "), ") :]

return flowstr

The current iteration of IPv6 support requires explicit fields to be set in addition to not properly support the actual IPv6 addresses properly. With this change, make it so that the ipv6() bare option is usable to create wildcarded flows to match broad swaths of ipv6 traffic.

Reviewed-by: Simon Horman horms@kernel.org Tested-by: Simon Horman horms@kernel.org Signed-off-by: Aaron Conole aconole@redhat.com --- .../selftests/net/openvswitch/ovs-dpctl.py | 42 ++++++++++++------- 1 file changed, 27 insertions(+), 15 deletions(-)

diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 2f16df2fb16b..2062e7e6e99e 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -200,6 +200,18 @@ def convert_ipv4(data):

return int(ipaddress.IPv4Address(ip)), int(ipaddress.IPv4Address(mask))

+def convert_ipv6(data): + ip, _, mask = data.partition('/') + + if not ip: + ip = mask = 0 + elif not mask: + mask = 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' + elif mask.isdigit(): + mask = ipaddress.IPv6Network("::/" + mask).hostmask + + return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed + def convert_int(size): def convert_int_sized(data): value, _, mask = data.partition('/') @@ -941,21 +953,21 @@ class ovskey(nla): "src", "src", lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), - lambda x: ipaddress.IPv6Address(x), + lambda x: ipaddress.IPv6Address(x).packed if x else 0, + convert_ipv6, ), ( "dst", "dst", lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), - lambda x: ipaddress.IPv6Address(x), + lambda x: ipaddress.IPv6Address(x).packed if x else 0, + convert_ipv6, ), - ("label", "label", "%d", int), - ("proto", "proto", "%d", int), - ("tclass", "tclass", "%d", int), - ("hlimit", "hlimit", "%d", int), - ("frag", "frag", "%d", int), + ("label", "label", "%d", lambda x: int(x) if x else 0), + ("proto", "proto", "%d", lambda x: int(x) if x else 0), + ("tclass", "tclass", "%d", lambda x: int(x) if x else 0), + ("hlimit", "hlimit", "%d", lambda x: int(x) if x else 0), + ("frag", "frag", "%d", lambda x: int(x) if x else 0), )

def __init__( @@ -1152,8 +1164,8 @@ class ovskey(nla): ( "target", "target", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ("sll", "sll", macstr, lambda x: int.from_bytes(x, "big")), ("tll", "tll", macstr, lambda x: int.from_bytes(x, "big")), @@ -1237,14 +1249,14 @@ class ovskey(nla): ( "src", "src", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big", convertmac), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ( "dst", "dst", - lambda x: str(ipaddress.IPv6Address(x)), - lambda x: int.from_bytes(x, "big"), + lambda x: ipaddress.IPv6Address(x).packed, + convert_ipv6, ), ("tp_src", "tp_src", "%d", int), ("tp_dst", "tp_dst", "%d", int),

The current pmtu test infrastucture requires an installed copy of the ovs-vswitchd userspace. This means that any automated or constrained environments may not have the requisite tools to run the tests. However, the pmtu tests don't require any special classifier processing. Indeed they are only using the vswitchd in the most basic mode - as a NORMAL switch.

However, the ovs-dpctl kernel utility can now program all the needed basic flows to allow traffic to traverse the tunnels and provide support for at least testing some basic pmtu scenarios. More complicated flow pipelines can be added to the internal ovs test infrastructure, but that is work for the future. For now, enable the most common cases - wide mega flows with no other prerequisites.

Enhance the pmtu testing to try testing using the internal utility, first. As a fallback, if the internal utility isn't running, then try with the ovs-vswitchd userspace tools.

Signed-off-by: Aaron Conole aconole@redhat.com --- tools/testing/selftests/net/pmtu.sh | 145 +++++++++++++++++++++++----- 1 file changed, 123 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index cfc84958025a..51ccb9bed069 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -842,25 +842,97 @@ setup_bridge() { run_cmd ${ns_a} ip link set veth_A-C master br0 }

+setup_ovs_via_internal_utility() { + type="${1}" + a_addr="${2}" + b_addr="${3}" + dport="${4}" + + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} || return 1 + + ports=$(python3 ./openvswitch/ovs-dpctl.py show) + br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs) + type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs) + veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs) + + v4_a_tun="${prefix4}.${a_r1}.1" + v4_b_tun="${prefix4}.${b_r1}.1" + + v6_a_tun="${prefix6}:${a_r1}::1" + v6_b_tun="${prefix6}:${b_r1}::1" + + if [ "${v4_a_tun}" = "${a_addr}" ]; then + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + else + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \ + "${veth_a_port}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \ + "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \ + "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}" + fi +} + +setup_ovs_via_vswitchd() { + type="${1}" + b_addr="${2}" + + run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ + set interface ${type}_a type=${type} \ + options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 +} + setup_ovs_vxlan_or_geneve() { type="${1}" a_addr="${2}" b_addr="${3}" + dport="6081"

if [ "${type}" = "vxlan" ]; then + dport="4789" opts="${opts} ttl 64 dstport 4789" opts_b="local ${b_addr}" fi

- run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ - set interface ${type}_a type=${type} \ - options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 + setup_ovs_via_internal_utility "${type}" "${a_addr}" "${b_addr}" \ + "${dport}" || \ + setup_ovs_via_vswitchd "${type}" "${b_addr}" || return 1

run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1

run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b

+ run_cmd ip link set ${type}_a up run_cmd ${ns_b} ip link set ${type}_b up }

@@ -880,8 +952,24 @@ setup_ovs_vxlan6() { setup_ovs_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 }

+setup_ovs_br_internal() { + run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || \ + return 1 +} + +setup_ovs_br_vswitchd() { + run_cmd ovs-vsctl add-br ovs_br0 || return 1 +} + +setup_ovs_add_if() { + ifname="${1}" + run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 \ + "${ifname}" || \ + run_cmd ovs-vsctl add-port ovs_br0 "${ifname}" +} + setup_ovs_bridge() { - run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip + setup_ovs_br_internal || setup_ovs_br_vswitchd || return $ksft_skip run_cmd ip link set ovs_br0 up

run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C @@ -891,7 +979,7 @@ setup_ovs_bridge() { run_cmd ${ns_c} ip link set veth_C-A up run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A - run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + setup_ovs_add_if veth_A-C

# Move veth_A-R1 to init run_cmd ${ns_a} ip link set veth_A-R1 netns 1 @@ -922,6 +1010,18 @@ trace() { sleep 1 }

+cleanup_del_ovs_internal() { + # squelch the output of the del-if commands since it can be wordy + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a >/dev/null 2>&1 + python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0 >/dev/null 2>&1 +} + +cleanup_del_ovs_vswitchd() { + ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null + ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null +} + cleanup() { for pid in ${tcpdump_pids}; do kill ${pid} @@ -940,10 +1040,10 @@ cleanup() {

cleanup_all_ns

- ip link del veth_A-C 2>/dev/null - ip link del veth_A-R1 2>/dev/null - ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null - ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null + ip link del veth_A-C 2>/dev/null + ip link del veth_A-R1 2>/dev/null + cleanup_del_ovs_internal + cleanup_del_ovs_vswitchd rm -f "$tmpoutfile" }

@@ -1397,6 +1497,12 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { outer_family=${3} ll_mtu=4000

+ if [ "${type}" = "vxlan" ]; then + tun_a="vxlan_sys_4789" + elif [ "${type}" = "geneve" ]; then + tun_a="genev_sys_6081" + fi + if [ ${outer_family} -eq 4 ]; then setup namespaces routing ovs_bridge ovs_${type}4 || return $ksft_skip # IPv4 header UDP header VXLAN/GENEVE header Ethernet header @@ -1407,17 +1513,11 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) fi

- if [ "${type}" = "vxlan" ]; then - tun_a="vxlan_sys_4789" - elif [ "${type}" = "geneve" ]; then - tun_a="genev_sys_6081" - fi - - trace "" "${tun_a}" "${ns_b}" ${type}_b \ - "" veth_A-R1 "${ns_r1}" veth_R1-A \ - "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ - "" ovs_br0 "" veth-A-C \ - "${ns_c}" veth_C-A + trace "" ${type}_a "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A_C \ + "${ns_c}" veth_C-A "" "${tun_a}"

if [ ${family} -eq 4 ]; then ping=ping @@ -1436,8 +1536,9 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { mtu "${ns_b}" veth_B-R1 ${ll_mtu} mtu "${ns_r1}" veth_R1-B ${ll_mtu}

- mtu "" ${tun_a} $((${ll_mtu} + 1000)) - mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + mtu "" ${tun_a} $((${ll_mtu} + 1000)) 2>/dev/null || \ + mtu "" ${type}_a $((${ll_mtu} + 1000)) 2>/dev/null + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))

run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1