The "Writing Your First Test" section in "Getting Started" documentation have wordings that need to be tweaked for clarity and reducing redundancy. Rewrite the section.

Signed-off-by: Bagas Sanjaya bagasdotme@gmail.com --- Documentation/dev-tools/kunit/start.rst | 34 +++++++++++++++---------- 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index f4f504f1fb154f..590e25166efb0d 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -179,15 +179,19 @@ are built-in. Otherwise the module will need to be loaded.

Writing Your First Test ======================= -In your kernel repository, let's add some code that we can test. +In this tutorial, you will learn how to write and test a simple driver +which performs addition of two integers.

-1. Create a file ``drivers/misc/example.h``, which includes: +1. First, write the driver implementation. Follow the below steps. + + a. Create a new header file ``drivers/misc/example.h`` and add the + prototype for ``misc_example_add()``:

.. code-block:: c

int misc_example_add(int left, int right);

-2. Create a file ``drivers/misc/example.c``, which includes: + b. Write the function implementation in ``drivers/misc/example.c``:

.. code-block:: c

@@ -200,22 +204,25 @@ In your kernel repository, let's add some code that we can test. return left + right; }

-3. Add the following lines to ``drivers/misc/Kconfig``: + c. In order for the driver to be selected, add configuration entry to + ``drivers/misc/Kconfig``:

.. code-block:: kconfig

config MISC_EXAMPLE bool "My example"

-4. Add the following lines to ``drivers/misc/Makefile``: + d. Last but not least, append the make goal to ``drivers/misc/Makefile`` + so that the driver can be built:

.. code-block:: make

obj-$(CONFIG_MISC_EXAMPLE) += example.o

-Now we are ready to write the test cases. +2. Write the test suite that covers the driver functionality. Follow the + steps below:

-1. Add the below test case in ``drivers/misc/example_test.c``: + a. Write the test in ``drivers/misc/example_test.c``:

.. code-block:: c

@@ -250,7 +257,7 @@ Now we are ready to write the test cases. }; kunit_test_suite(misc_example_test_suite);

-2. Add the following lines to ``drivers/misc/Kconfig``: + b. Add configuration entry for the test suite to ``drivers/misc/Kconfig``:

.. code-block:: kconfig

@@ -259,26 +266,27 @@ Now we are ready to write the test cases. depends on MISC_EXAMPLE && KUNIT=y default KUNIT_ALL_TESTS

-3. Add the following lines to ``drivers/misc/Makefile``: + c. Append make goal for the configuration to ``drivers/misc/Makefile``:

.. code-block:: make

obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o

-4. Add the following lines to ``.kunit/.kunitconfig``: +3. In order to enable the driver and its test suite, append configuration + fragment to ``.kunit/.kunitconfig``:

.. code-block:: none

CONFIG_MISC_EXAMPLE=y CONFIG_MISC_EXAMPLE_TEST=y

-5. Run the test: +4. Run the test:

.. code-block:: bash

./tools/testing/kunit/kunit.py run

-You should see the following failure: +You should see the following output:

.. code-block:: none

@@ -289,7 +297,7 @@ You should see the following failure: [16:08:57] This test never passes. ...

-Congrats! You just wrote your first KUnit test. +Congrats! You have just written your first KUnit test.

Next Steps ==========

Rewrite the rest of "Getting Started" documentation for clarity. Major points:

* link to "Build directory for the kernel" section of kernel README for the caveats. * To change kernel configurations in .kunitconfig, use configuration interfaces just like configuring normal kernel. * Remove "Next steps" section as it will be placed on the introduction page.

Signed-off-by: Bagas Sanjaya bagasdotme@gmail.com --- Documentation/admin-guide/README.rst | 2 + Documentation/dev-tools/kunit/start.rst | 210 ++++++++++-------------- 2 files changed, 93 insertions(+), 119 deletions(-)

diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index 9a969c0157f1e5..f3cdc8496da03f 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -123,6 +123,8 @@ Software requirements you can just update packages when obvious problems arise during build or operation.

+.. _kernel-build-directory: + Build directory for the kernel ------------------------------

diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index cdf043b6550e66..1195d5de53343e 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -4,178 +4,164 @@ Getting Started ===============

-This page contains an overview of the kunit_tool and KUnit framework, -teaching how to run existing tests and then how to write a simple test case, -and covers common problems users face when using KUnit for the first time. +This guide is an overview of KUnit framework. It teaches how to run tests +with kunit_tool as well as writing a simple test case.

-Installing Dependencies -======================= -KUnit has the same dependencies as the Linux kernel. As long as you can -build the kernel, you can run KUnit. +Prerequisites +============= +No extra dependencies are required in order to use KUnit. See +:doc:`/process/changes` for details.

Running tests with kunit_tool ============================= -kunit_tool is a Python script, which configures and builds a kernel, runs -tests, and formats the test results. From the kernel repository, you -can run kunit_tool: +kunit_tool is a wrapper script written in Python. It configures and builds +the kernel, runs tests, and formats the results. To run the script:

.. code-block:: bash

./tools/testing/kunit/kunit.py run

.. note :: - You may see the following error: - "The source tree is not clean, please run 'make ARCH=um mrproper'" + You may see the following error::

- This happens because internally kunit.py specifies ``.kunit`` - (default option) as the build directory in the command ``make O=output/dir`` - through the argument ``--build_dir``. Hence, before starting an - out-of-tree build, the source tree must be clean. + The source tree is not clean, please run 'make ARCH=um mrproper'

- There is also the same caveat mentioned in the "Build directory for - the kernel" section of the :doc:`admin-guide </admin-guide/README>`, - that is, its use, it must be used for all invocations of ``make``. - The good news is that it can indeed be solved by running - ``make ARCH=um mrproper``, just be aware that this will delete the - current configuration and all generated files. + This happens because internally kunit_tool passes the default build + directory ``.kunit`` as environment variable to make (which is invoked + as ``make O=.kunit``). A different build directory can be specified by + passing ``--build_dir`` option. Hence, before starting the build, + the source tree must be clean.

-If everything worked correctly, you should see the following: + The caveat from the :ref:`kernel-build-directory` + also applies to running kunit_tool.

-.. code-block:: +If everything worked correctly, you should see the following output::

Configuring KUnit Kernel ... Building KUnit Kernel ... Starting KUnit Kernel ...

-The tests will pass or fail. +.. note :: + Depending on configurations enabled in the kernel, the build process + may take a while. + +See Documentation/dev-tools/kunit/run_wrapper.rst for details. + +Selecting tests +--------------- + +By default, kunit_tool runs all tests using default configuration (defconfig). +The following subsections allow you to customize the configuration as well as +filtering the test that will be run.

.. note :: - Because it is building a lot of sources for the first time, - the ``Building KUnit Kernel`` step may take a while. + KUnit by default runs tests for UML architecture (``ARCH=um``). If you + need to run test on other architectures see :ref:`kunit-on-qemu`.

-For detailed information on this wrapper, see: -Documentation/dev-tools/kunit/run_wrapper.rst. - -Selecting which tests to run ----------------------------- - -By default, kunit_tool runs all tests reachable with minimal configuration, -that is, using default values for most of the kconfig options. However, -you can select which tests to run by: - -- `Customizing Kconfig`_ used to compile the kernel, or -- `Filtering tests by name`_ to select specifically which compiled tests to run. - -Customizing Kconfig -~~~~~~~~~~~~~~~~~~~ -A good starting point for the ``.kunitconfig`` is the KUnit default config. -If you didn't run ``kunit.py run`` yet, you can generate it by running: +Kernel configuration +~~~~~~~~~~~~~~~~~~~~ +A good starting point for the ``.kunitconfig`` is the KUnit default config, +which can be generated by:

.. code-block:: bash

- cd $PATH_TO_LINUX_REPO - tools/testing/kunit/kunit.py config - cat .kunit/.kunitconfig + ./tools/testing/kunit/kunit.py config

.. note :: - ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is - ``.kunit`` by default. + ``.kunitconfig`` is located in the directory specified by ``--build_dir`` + argument. The default build directory is ``.kunit``.

-Before running the tests, kunit_tool ensures that all config options -set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn -you if you have not included dependencies for the options used. +Before running the tests, kunit_tool ensures that all options set in +``.kunitconfig`` are set in the ``.config`` used for kernel build process. It +will errored if you have not enabled option dependencies for all selected +options.

There are many ways to customize the configurations:

-a. Edit ``.kunit/.kunitconfig``. The file should contain the list of kconfig +a. Edit the configuration. ``.kunitconfig`` should contains configuration options required to run the desired tests, including their dependencies. - You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as - it will enable a number of additional tests that you may not want. - If you need to run on an architecture other than UML see :ref:`kunit-on-qemu`. - -b. Enable additional kconfig options on top of ``.kunit/.kunitconfig``. - For example, to include the kernel's linked-list test you can run:: + As with other kernel configurations, it is recommended to use :doc:`one of + configuration interfaces </kbuild/kconfig>`, passing + ``KCONFIG_CONFIG=.kunit/.kunitconfig`` target variable to make. You may + want to disable ``CONFIG_KUNIT_ALL_TESTS`` as it will enable a number of + additional tests that you may not want to be run. + +b. Add options with ``--kconfig_add``. For example, to include the + linked-list test you can run::

./tools/testing/kunit/kunit.py run \ --kconfig_add CONFIG_LIST_KUNIT_TEST=y

-c. Provide the path of one or more .kunitconfig files from the tree. - For example, to run only ``FAT_FS`` and ``EXT4`` tests you can run:: +c. Pass the path to one or more .kunitconfig files from the tree. + For example, to run only ``FAT_FS`` and ``EXT4`` tests::

./tools/testing/kunit/kunit.py run \ --kunitconfig ./fs/fat/.kunitconfig \ --kunitconfig ./fs/ext4/.kunitconfig

-d. If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the - ``.config`` file. But you can edit the ``.config`` file directly or with - tools like ``make menuconfig O=.kunit``. As long as its a superset of - ``.kunitconfig``, kunit.py won't overwrite your changes. - - .. note ::

- To save a .kunitconfig after finding a satisfactory configuration:: - - make savedefconfig O=.kunit - cp .kunit/defconfig .kunit/.kunitconfig + If you change the ``.kunitconfig``, kunit_tool will resynchronize + ``.config``, which can be edited. As long as it is a superset of + ``.kunitconfig``, kunit.py won't overwrite your changes in ``.config``

Filtering tests by name ~~~~~~~~~~~~~~~~~~~~~~~ -If you want to be more specific than Kconfig can provide, it is also possible -to select which tests to execute at boot-time by passing a glob filter -(read instructions regarding the pattern in the manpage :manpage:`glob(7)`). -If there is a ``"."`` (period) in the filter, it will be interpreted as a -separator between the name of the test suite and the test case, -otherwise, it will be interpreted as the name of the test suite. -For example, let's assume we are using the default config: +It is also possible to select which tests to execute at boot-time by passing +a glob filter (see :manpage:`glob(7)` for details). +If there is a period (``.``) in the filter, it will be interpreted as a +separator between the name of the test suite and the test case; otherwise it +will be interpreted as the name of the test suite.

-a. inform the name of a test suite, like ``"kunit_executor_test"``, - to run every test case it contains:: +The complete ways to specify the tests are: + +a. Pass the test suite name to run every case in that test::

./tools/testing/kunit/kunit.py run "kunit_executor_test"

-b. inform the name of a test case prefixed by its test suite, - like ``"example.example_simple_test"``, to run specifically that test case:: +b. Pass the fully qualified name of test case to run the specific case::

./tools/testing/kunit/kunit.py run "example.example_simple_test"

-c. use wildcard characters (``*?[``) to run any test case that matches the pattern, - like ``"*.*64*"`` to run test cases containing ``"64"`` in the name inside - any test suite:: +c. Use wildcard characters (``*?[``) to run any test case that matches the + pattern. For example, ``"*.*64*"`` matches test case names that contain + "64" across any test suite::

./tools/testing/kunit/kunit.py run "*.*64*"

-Running Tests without the KUnit Wrapper -======================================= -If you do not want to use the KUnit Wrapper (for example: you want code -under test to integrate with other systems, or use a different/ +Running tests without kunit_tool +================================ +If you do not want to use kunit_tool (e.g. you want the tested code +to be integrated with other systems, or use different/ unsupported architecture or configuration), KUnit can be included in -any kernel, and the results are read out and parsed manually. +any kernel code. The results can then be read out and parsed manually.

.. note :: ``CONFIG_KUNIT`` should not be enabled in a production environment. Enabling KUnit disables Kernel Address-Space Layout Randomization - (KASLR), and tests may affect the state of the kernel in ways not - suitable for production. + (KASLR) and tests may affect the state of the kernel in ways not + suitable for production (like performance issues).

-Configuring the Kernel +Configuring the kernel ---------------------- -To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` Kconfig -option (under Kernel Hacking/Kernel Testing and Coverage in -``menuconfig``). From there, you can enable any KUnit tests. They -usually have config options ending in ``_KUNIT_TEST``. +To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` +option (the entry is under +:menuselection:`Kernel Hacking -> Kernel Testing and Coverage`). +You can enable any tests that you want to be run. These +configuration usually have ``_KUNIT_TEST`` suffix.

-KUnit and KUnit tests can be compiled as modules. The tests in a module -will run when the module is loaded. +Just like any other configuration options, KUnit and KUnit tests can be +built as modules. The tests in the module will be run when the module is +loaded.

-Running Tests (without KUnit Wrapper) -------------------------------------- -Build and run your kernel. In the kernel log, the test output is printed -out in the TAP format. This will only happen by default if KUnit/tests -are built-in. Otherwise the module will need to be loaded. +Running tests +------------- +Build and run your kernel as usual. If KUnit and the tests are built as +modules, these need to be loaded first. The test results are logged (printed +out) in the TAP format.

.. note :: - Some lines and/or data may get interspersed in the TAP output. + Some lines and/or data may get interspersed in the output.

Writing Your First Test ======================= @@ -298,17 +284,3 @@ You should see the following output: ...

Congrats! You have just written your first KUnit test. - -Next Steps -========== - -* Documentation/dev-tools/kunit/architecture.rst - KUnit architecture. -* Documentation/dev-tools/kunit/run_wrapper.rst - run kunit_tool. -* Documentation/dev-tools/kunit/run_manual.rst - run tests without kunit_tool. -* Documentation/dev-tools/kunit/usage.rst - write tests. -* Documentation/dev-tools/kunit/tips.rst - best practices with - examples. -* Documentation/dev-tools/kunit/api/index.rst - KUnit APIs - used for testing. -* Documentation/dev-tools/kunit/faq.rst - KUnit common questions and - answers.

Rewrite the documentation for clarity. Major points:

* Switch from first-person to second-person point of view * The configuration step is now within "Kernel configuration" section * Replace description of common options with pointer to running --help for commands of the wrapper script

Signed-off-by: Bagas Sanjaya bagasdotme@gmail.com --- Documentation/dev-tools/kunit/run_wrapper.rst | 302 ++++++------------ 1 file changed, 97 insertions(+), 205 deletions(-)

diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index dafe8eb28d3015..d683580b21d2db 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -4,21 +4,20 @@ Running tests with kunit_tool =============================

-We can either run KUnit tests using kunit_tool or can run tests -manually, and then use kunit_tool to parse the results. To run tests -manually, see: Documentation/dev-tools/kunit/run_manual.rst. -As long as we can build the kernel, we can run KUnit. +This documentation describes running tests with kunit_tool script. +If you'd like to manually run tests, see +Documentation/dev-tools/kunit/run_manual.rst.

kunit_tool is a Python script which configures and builds a kernel, runs tests, and formats the test results.

-Run command: +To run the tests:

.. code-block::

./tools/testing/kunit/kunit.py run

-We should see the following: +You should see the following output:

.. code-block::

@@ -26,124 +25,112 @@ We should see the following: Building KUnit kernel... Starting KUnit kernel...

-We may want to use the following options: +You can also specify options to the script when running the tests. For +example, to run tests utilizing all available CPUs within 30 seconds +time limit:

.. code-block::

./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`

-- ``--timeout`` sets a maximum amount of time for tests to run. -- ``--jobs`` sets the number of threads to build the kernel. +For list of all options, see::

-kunit_tool will generate a ``.kunitconfig`` with a default -configuration, if no other ``.kunitconfig`` file exists -(in the build directory). In addition, it verifies that the -generated ``.config`` file contains the ``CONFIG`` options in the -``.kunitconfig``. -It is also possible to pass a separate ``.kunitconfig`` fragment to -kunit_tool. This is useful if we have several different groups of -tests we want to run independently, or if we want to use pre-defined -test configs for certain subsystems. + ./tools/testing/kunit/kunit.py run --help + +Kernel configuration +==================== + +kunit_tool will generate kernel configuration named ``.kunitconfig`` +if it doesn't exist in the build directory. For list of selected options by +default, see ``tools/testing/kunit/configs/default.config`` file. + +In addition, it verifies that the synchronized ``.config`` file +contains options enabled in ``.kunitconfig``. It will errored out if +you have not enabled option dependencies required by all selected options. + +It is also possible to specify different ``.kunitconfig`` to +kunit_tool. This is useful if you have several different groups of +tests that you want to run independently, or if you want to use pre-defined +configurations for certain subsystems.

To use a different ``.kunitconfig`` file (such as one -provided to test a particular subsystem), pass it as an option: +provided to test a particular subsystem), specify ``--kunitconfig`` option. +For example, to run ext4 tests:

.. code-block::

./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig

-To view kunit_tool flags (optional command-line arguments), run: +Customizing configuration +-------------------------

-.. code-block:: +A ``.kunitconfig`` is a configuration file generated by +``make savedefconfig``, used for running enabled set of tests. This file +contains configuration options with specific enabled tests. The file also +contains any other coptions required by the tests, for example +dependencies for features under tests, arch-specific configs and so on.

- ./tools/testing/kunit/kunit.py run --help - -Creating a ``.kunitconfig`` file -================================ - -If we want to run a specific set of tests (rather than those listed -in the KUnit ``defconfig``), we can provide Kconfig options in the -``.kunitconfig`` file. For default .kunitconfig, see: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tool.... -A ``.kunitconfig`` is a ``minconfig`` (a .config -generated by running ``make savedefconfig``), used for running a -specific set of tests. This file contains the regular Kernel configs -with specific test targets. The ``.kunitconfig`` also -contains any other config options required by the tests (For example: -dependencies for features under tests, configs that enable/disable -certain code blocks, arch configs and so on). - -To create a ``.kunitconfig``, using the KUnit ``defconfig``: +To generate default ``.kunitconfig``:

.. code-block::

cd $PATH_TO_LINUX_REPO cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig

-We can then add any other Kconfig options. For example: +You can then customize the configuration. As with configuring regular kernels +for production deployment, it is recommended to use +:doc:`one of configuration interfaces </kbuild/kconfig>`. For example, +to configure through menuconfig::

-.. code-block:: + make O=.kunit KCONFIG_CONFIG=.kunit/.kunitconfig menuconfig

- CONFIG_LIST_KUNIT_TEST=y +.. note:: + ``.config`` will only be resynchronized if it is the superset of + ``.kunitconfig``. Removing any options from the latter will not + resynchronize the former. In that case, you need to manually + update the former by::

-kunit_tool ensures that all config options in ``.kunitconfig`` are -set in the kernel ``.config`` before running the tests. It warns if we -have not included the options dependencies. + cp .kunitconfig .config

-.. note:: Removing something from the ``.kunitconfig`` will - not rebuild the ``.config file``. The configuration is only - updated if the ``.kunitconfig`` is not a subset of ``.config``. - This means that we can use other tools - (For example: ``make menuconfig``) to adjust other config options. - The build dir needs to be set for ``make menuconfig`` to - work, therefore by default use ``make O=.kunit menuconfig``. +Step-by-step run +================

-Configuring, building, and running tests -======================================== +It is possible to sequentially run testing steps for finer-grained control.

-If we want to make manual changes to the KUnit build process, we -can run part of the KUnit build process independently. -When running kunit_tool, from a ``.kunitconfig``, we can generate a -``.config`` by using the ``config`` argument: +First, synchronize ``.config`` from ``.kunitconfig`` that have been +configured before:

.. code-block::

./tools/testing/kunit/kunit.py config

-To build a KUnit kernel from the current ``.config``, we can use the -``build`` argument: +Before the tests can be run, the kernel needs to be built first:

.. code-block::

./tools/testing/kunit/kunit.py build

-If we already have built UML kernel with built-in KUnit tests, we -can run the kernel, and display the test results with the ``exec`` -argument: +The whole tests can now be executed:

.. code-block::

./tools/testing/kunit/kunit.py exec

-The ``run`` command discussed in section: **Running tests with kunit_tool**, -is equivalent to running the above three commands in sequence. - Parsing test results ====================

-KUnit tests output displays results in TAP (Test Anything Protocol) -format. When running tests, kunit_tool parses this output and prints -a summary. To see the raw test results in TAP format, we can pass the -``--raw_output`` argument: +KUnit generates test results in TAP (Test Anything Protocol) format. When +the tests are running, kunit_tool parses the result and prints +the summary. To see the results in raw TAP format, you can pass +``--raw_output`` option:

.. code-block::

./tools/testing/kunit/kunit.py run --raw_output

-If we have KUnit results in the raw TAP format, we can parse them and -print the human-readable summary with the ``parse`` command for -kunit_tool. This accepts a filename for an argument, or will read from -standard input. +Now you can parse the output and print the human-readable summary with the +``parse`` command. It accepts the filename argument. If none is given, it +will read from standard input.

.. code-block:: bash

@@ -155,74 +142,63 @@ standard input. Filtering tests ===============

-By passing a bash style glob filter to the ``exec`` or ``run`` -commands, we can run a subset of the tests built into a kernel . For -example: if we only want to run KUnit resource tests, use: +You can also specify tests using :manpage:`glob(7)` pattern. For example, +to run resource tests (which are prefixed by ``kunit-resource``):

.. code-block::

./tools/testing/kunit/kunit.py run 'kunit-resource*'

-This uses the standard glob format with wildcard characters. - .. _kunit-on-qemu:

Running tests on QEMU =====================

-kunit_tool supports running tests on qemu as well as -via UML. To run tests on qemu, by default it requires two flags: +Besides running tests with UML kernel, kunit_wrapper also supports +running tests on QEMU. Two options are required for this to work:

-- ``--arch``: Selects a configs collection (Kconfig, qemu config options - and so on), that allow KUnit tests to be run on the specified - architecture in a minimal way. The architecture argument is same as - the option name passed to the ``ARCH`` variable used by Kbuild. - Not all architectures currently support this flag, but we can use - ``--qemu_config`` to handle it. If ``um`` is passed (or this flag - is ignored), the tests will run via UML. Non-UML architectures, - for example: i386, x86_64, arm and so on; run on qemu. +- ``--arch``: Run tests for the specified architecture. The value will be + passed to make as ``ARCH`` environment variable. + Not all architectures currently support this flag. For such architectures, + use ``--qemu_config`` instead (discussed later). If ``um`` is specifed (or + if this option is not given), the tests will run in UML kernel. Otherwise, + the tests run on QEMU.

-- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the - same argument as passed to the ``CROSS_COMPILE`` variable used by - Kbuild. As a reminder, this will be the prefix for the toolchain - binaries such as GCC. For example: +- ``--cross_compile``: Specifies the cross-compiler toolchain prefix. + The value will be used for ``CROSS_COMPILE`` environment variable when + building the kernel.

- - ``sparc64-linux-gnu`` if we have the sparc toolchain installed on - our system. +Examples:

- - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` - if we have downloaded the microblaze toolchain from the 0-day - website to a directory in our home directory called toolchains. + - To run tests for native x86_64 architecture:

-This means that for most architectures, running under qemu is as simple as: - -.. code-block:: bash + .. code-block:: bash

./tools/testing/kunit/kunit.py run --arch=x86_64

-When cross-compiling, we'll likely need to specify a different toolchain, for -example: + - To cross-compile and test for s390:

-.. code-block:: bash + .. code-block:: bash

./tools/testing/kunit/kunit.py run \ --arch=s390 \ --cross_compile=s390x-linux-gnu-

-If we want to run KUnit tests on an architecture not supported by -the ``--arch`` flag, or want to run KUnit tests on qemu using a -non-default configuration; then we can write our own``QemuConfig``. -These ``QemuConfigs`` are written in Python. They have an import line -``from..qemu_config import QemuArchParams`` at the top of the file. -The file must contain a variable called ``QEMU_ARCH`` that has an -instance of ``QemuArchParams`` assigned to it. See example in: -``tools/testing/kunit/qemu_configs/x86_64.py``. +Custom QEMU configuration +------------------------- +If you want to test on an architecture unsupported by the ``--arch`` option, +or to customize QEMU invocation, you can write ``QemuConfig`` configuration, +which is written in Python. The file begins with +:code:`from..qemu_config import QemuArchParams` as import directive. +The file must contain an object called ``QEMU_ARCH`` which is +built from ``QemuArchParams`` class.

-Once we have a ``QemuConfig``, we can pass it into kunit_tool, -using the ``--qemu_config`` flag. When used, this flag replaces the -``--arch`` flag. For example: using -``tools/testing/kunit/qemu_configs/x86_64.py``, the invocation appear -as +Once ``QemuConfig`` have been configured, you can specify the file to +kunit_tool using the ``--qemu_config`` option. This overrides ``--arch`` +option. + +For example, to specify QEMU configuration for native x86_64 architecture +with 12 build jobs and 60 seconds timeout:

.. code-block:: bash

@@ -231,93 +207,9 @@ as --jobs=12 \ --qemu_config=./tools/testing/kunit/qemu_configs/x86_64.py

-Running command-line arguments -============================== +Command options +===============

-kunit_tool has a number of other command-line arguments which can -be useful for our test environment. Below are the most commonly used -command line arguments: +To see a list of options for a particular command (along with usage), see::

-- ``--help``: Lists all available options. To list common options, - place ``--help`` before the command. To list options specific to that - command, place ``--help`` after the command. - - .. note:: Different commands (``config``, ``build``, ``run``, etc) - have different supported options. -- ``--build_dir``: Specifies kunit_tool build directory. It includes - the ``.kunitconfig``, ``.config`` files and compiled kernel. - -- ``--make_options``: Specifies additional options to pass to make, when - compiling a kernel (using ``build`` or ``run`` commands). For example: - to enable compiler warnings, we can pass ``--make_options W=1``. - -- ``--alltests``: Enable a predefined set of options in order to build - as many tests as possible. - - .. note:: The list of enabled options can be found in - ``tools/testing/kunit/configs/all_tests.config``. - - If you only want to enable all tests with otherwise satisfied - dependencies, instead add ``CONFIG_KUNIT_ALL_TESTS=y`` to your - ``.kunitconfig``. - -- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig`` - file. For example: - - - ``lib/kunit/.kunitconfig`` can be the path of the file. - - - ``lib/kunit`` can be the directory in which the file is located. - - This file is used to build and run with a predefined set of tests - and their dependencies. For example, to run tests for a given subsystem. - -- ``--kconfig_add``: Specifies additional configuration options to be - appended to the ``.kunitconfig`` file. For example: - - .. code-block:: - - ./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y - -- ``--arch``: Runs tests on the specified architecture. The architecture - argument is same as the Kbuild ARCH environment variable. - For example, i386, x86_64, arm, um, etc. Non-UML architectures run on qemu. - Default is `um`. - -- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the - same argument as passed to the ``CROSS_COMPILE`` variable used by - Kbuild. This will be the prefix for the toolchain - binaries such as GCC. For example: - - - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on - our system. - - - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` - if we have downloaded the microblaze toolchain from the 0-day - website to a specified path in our home directory called toolchains. - -- ``--qemu_config``: Specifies the path to a file containing a - custom qemu architecture definition. This should be a python file - containing a `QemuArchParams` object. - -- ``--qemu_args``: Specifies additional qemu arguments, for example, ``-smp 8``. - -- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously. - By default, this is set to the number of cores on your system. - -- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run. - This does not include the time taken to build the tests. - -- ``--kernel_args``: Specifies additional kernel command-line arguments. May be repeated. - -- ``--run_isolated``: If set, boots the kernel for each individual suite/test. - This is useful for debugging a non-hermetic test, one that - might pass/fail based on what ran before it. - -- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are: - - - ``all``: To view the full kernel output, use ``--raw_output=all``. - - - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``. - -- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or - saves to a file if a filename is specified. + ./tools/testing/kunit/kunit.py <command> --help

Rewrite the documentation for clarity. Major points:

* Switch to third person point of view * Briefly describe code examples before giving them out * Use "base" and "derived" terminology on class inheritance

Signed-off-by: Bagas Sanjaya bagasdotme@gmail.com --- Documentation/dev-tools/kunit/usage.rst | 322 +++++++++++++----------- 1 file changed, 173 insertions(+), 149 deletions(-)

diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 2737863ef36532..e529da3fd1d32b 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -6,9 +6,11 @@ Writing Tests Test Cases ----------

-The fundamental unit in KUnit is the test case. A test case is a function with -the signature ``void (*)(struct kunit *test)``. It calls the function under test -and then sets *expectations* for what should happen. For example: +The fundamental unit in KUnit is the test case. A test case in KUnit is a +function with the signature ``void (*)(struct kunit *test)``. It calls the +function under test and then sets *expectations* for what should happen. + +Below are the simplest examples:

.. code-block:: c

@@ -22,18 +24,17 @@ and then sets *expectations* for what should happen. For example: }

In the above example, ``example_test_success`` always passes because it does -nothing; no expectations are set, and therefore all expectations pass. On the -other hand ``example_test_failure`` always fails because it calls ``KUNIT_FAIL``, -which is a special expectation that logs a message and causes the test case to -fail. +nothing (there are no expectations set). On the +other hand ``example_test_failure`` always fails because it calls +``KUNIT_FAIL``, which is a special function that logs the message string and +signal the test as failed.

Expectations ~~~~~~~~~~~~ -An *expectation* specifies that we expect a piece of code to do something in a -test. An expectation is called like a function. A test is made by setting -expectations about the behavior of a piece of code under test. When one or more -expectations fail, the test case fails and information about the failure is -logged. For example: +An *expectation* specifies the expected behavior of tested function. It is +written as regular function call. A test is made by asserting one or more +expectations in the test case. When any of these is not satisfied, the test +case fails and information about the failure is logged. For example:

.. code-block:: c

@@ -43,18 +44,16 @@ logged. For example: KUNIT_EXPECT_EQ(test, 2, add(1, 1)); }

-In the above example, ``add_test_basic`` makes a number of assertions about the -behavior of a function called ``add``. The first parameter is always of type +In the above example, ``add_test_basic`` tests a function called ``add()``. +The first parameter to ``KUNIT_EXPECT_EQ`` is always of type ``struct kunit *``, which contains information about the current test context. -The second parameter, in this case, is what the value is expected to be. The -last value is what the value actually is. If ``add`` passes all of these -expectations, the test case, ``add_test_basic`` will pass; if any one of these -expectations fails, the test case will fail. +The second parameter is what the value is expected to be returned by the +function. The last is value returned by calling the tested function.

-A test case *fails* when any expectation is violated; however, the test will -continue to run, and try other expectations until the test case ends or is -otherwise terminated. This is as opposed to *assertions* which are discussed -later. +Even though a single expectation is not satisfied, the test will +continue to run and try asserting the following expectations until either +the test case ends or is terminated. This is as opposed to *assertions* which +are discussed later.

To learn about more KUnit expectations, see Documentation/dev-tools/kunit/api/test.rst.

@@ -62,9 +61,8 @@ To learn about more KUnit expectations, see Documentation/dev-tools/kunit/api/te A single test case should be short, easy to understand, and focused on a single behavior.

-For example, if we want to rigorously test the ``add`` function above, create -additional tests cases which would test each property that an ``add`` function -should have as shown below: +The example below extends ``add()`` tests with cases for negative values +and edge cases involving ``INT_MIN`` and ``INT_MAX`` constants:

.. code-block:: c

@@ -93,8 +91,10 @@ should have as shown below: Assertions ~~~~~~~~~~

-An assertion is like an expectation, except that the assertion immediately -terminates the test case if the condition is not satisfied. For example: +An assertion is like an expectation, except that it immediately +terminates the test case if the condition is false. + +The following example demonstrate testing ``sort()`` function:

.. code-block:: c

@@ -112,21 +112,22 @@ terminates the test case if the condition is not satisfied. For example: KUNIT_EXPECT_LE(test, a[i], a[i + 1]); }

-In this example, the method under test should return pointer to a value. If the -pointer returns null or an errno, we want to stop the test since the following -expectation could crash the test case. `ASSERT_NOT_ERR_OR_NULL(...)` allows us -to bail out of the test case if the appropriate conditions are not satisfied to -complete the test. +In this example, the method under test should return pointer to a value. If +it instead returns null pointer or errno, the test case should be bailed out +with ``KUNIT_ASSERT_NOT_ERR_OR_NULL()`` since the following expectation that +asserts the array order could crash it.

Test Suites ~~~~~~~~~~~

-We need many test cases covering all the unit's behaviors. It is common to have -many similar tests. In order to reduce duplication in these closely related -tests, most unit testing frameworks (including KUnit) provide the concept of a -*test suite*. A test suite is a collection of test cases for a unit of code -with optional setup and teardown functions that run before/after the whole -suite and/or every test case. For example: +It is common to have many similar tests cases in order to test the code +behavior. In order to reduce duplication in these closely related +tests, most unit testing frameworks (including KUnit) provide the *test suite* +concept. A test suite is a collection of test cases for a particularcode +with optional setup and cleanup functions that run before/after the whole +suite and/or every test case. + +Below is an example of writing a test suite:

.. code-block:: c

@@ -147,21 +148,21 @@ suite and/or every test case. For example: }; kunit_test_suite(example_test_suite);

-In the above example, the test suite ``example_test_suite`` would first run -``example_suite_init``, then run the test cases ``example_test_foo``, -``example_test_bar``, and ``example_test_baz``. Each would have -``example_test_init`` called immediately before it and ``example_test_exit`` -called immediately after it. Finally, ``example_suite_exit`` would be called -after everything else. ``kunit_test_suite(example_test_suite)`` registers the -test suite with the KUnit test framework. +In the above example, running ``example_test_suite`` will initialize the +suite with ``example_suite_init``, then run three cases ``example_test_foo``, +``example_test_bar``, and ``example_test_baz``. Each case will be initialized +with ``example_test_init`` and ``example_test_exit`` will take care of +case-specific cleanup after the case have been finished. Finally, +``example_suite_exit`` will do suite-wide cleanup, then finish the suite. +``kunit_test_suite(example_test_suite)`` registers the test suite with KUnit.

.. note:: A test case will only run if it is associated with a test suite.

-``kunit_test_suite(...)`` is a macro which tells the linker to put the -specified test suite in a special linker section so that it can be run by KUnit -either after ``late_init``, or when the test module is loaded (if the test was -built as a module). +``kunit_test_suite()`` is a macro which tells the linker to put the specified +test suite in a special linker section so that it can be run either after +``late_init``, or when the test module is loaded (if the test was built as +module).

For more information, see Documentation/dev-tools/kunit/api/test.rst.

@@ -170,25 +171,23 @@ For more information, see Documentation/dev-tools/kunit/api/test.rst. Writing Tests For Other Architectures -------------------------------------

-It is better to write tests that run on UML to tests that only run under a -particular architecture. It is better to write tests that run under QEMU or -another easy to obtain (and monetarily free) software environment to a specific -piece of hardware. +In many cases, it is better to write tests that can be run on UML or QEMU +without requiring any specific architecture or hardware, since these can +be practically run by any machine that is capable of cross-compiling.

-Nevertheless, there are still valid reasons to write a test that is architecture -or hardware specific. For example, we might want to test code that really -belongs in ``arch/some-arch/*``. Even so, try to write the test so that it does -not depend on physical hardware. Some of our test cases may not need hardware, -only few tests actually require the hardware to test it. When hardware is not -available, instead of disabling tests, we can skip them. +Nevertheless, there are still valid reasons to write architecture-specific +or hardware-specific tests. For example, you might want to test codes that +are in ``arch/some-arch/*``. Even so, try to write tests so that it does +not require specific hardware to run them. A test suite may contain +hardware-specific cases. These can be skipped if the hardware is not +available.

-Now that we have narrowed down exactly what bits are hardware specific, the -actual procedure for writing and running the tests is same as writing normal -KUnit tests. +Writing architecture-specific and hardware-specific tests is the same as +writing any other tests.

.. important:: - We may have to reset hardware state. If this is not possible, we may only - be able to run one test case per invocation. + In some cases you need to reset hardware state after each test case, + otherwise only one case can be run per test suite.

.. TODO(brendanhiggins@google.com): Add an actual example of an architecture- dependent KUnit test. @@ -200,38 +199,41 @@ Isolating Behavior ------------------

Unit testing limits the amount of code under test to a single unit. It controls -what code gets run when the unit under test calls a function. Where a function -is exposed as part of an API such that the definition of that function can be +what code gets run when the unit under test calls a function. When a function +is exposed as part of an API, the function definition can be changed without affecting the rest of the code base. In the kernel, this comes from two constructs: classes, which are structs that contain function pointers -provided by the implementer, and architecture-specific functions, which have -definitions selected at compile time. +provided by the implementer; and architecture-specific functions, which have +definitions determined at compile time.

Classes ~~~~~~~

-Classes are not a construct that is built into the C programming language; -however, it is an easily derived concept. Accordingly, in most cases, every -project that does not use a standardized object oriented library (like GNOME's -GObject) has their own slightly different way of doing object oriented -programming; the Linux kernel is no exception. +The C programming language does not have the formal notion of class-based +object-oriented programming, hovewer the paradigm can be applied within +procedural framework. Accordingly, every project has their own slightly +different way of doing object oriented programming (such as GNOME's GObject); +the Linux kernel is no exception.

The central concept in kernel object oriented programming is the class. In the kernel, a *class* is a struct that contains function pointers. This creates a contract between *implementers* and *users* since it forces them to use the -same function signature without having to call the function directly. To be a -class, the function pointers must specify that a pointer to the class, known as -a *class handle*, be one of the parameters. Thus the member functions (also -known as *methods*) have access to member variables (also known as *fields*) -allowing the same implementation to have multiple *instances*. +same function signature without having to call the function directly. In order +to be a class, the function pointers must specify that a pointer to the class +(known as a *class handle*) be one of the parameters; thus the member functions +(also known as *methods*) have access to member variables (also known as +*fields*), allowing the same implementation to have multiple *instances*.

-A class can be *overridden* by *child classes* by embedding the *parent class* -in the child class. Then when the child class *method* is called, the child -implementation knows that the pointer passed to it is of a parent contained -within the child. Thus, the child can compute the pointer to itself because the -pointer to the parent is always a fixed offset from the pointer to the child. -This offset is the offset of the parent contained in the child struct. For -example: +A class can be *overridden* by *derived classes* by embedding the *base class* +in the derived class. Then when the dervied class *method* is called, the +derived class implementation knows that the pointer passed to it is of a base +class contained within the derived class. Thus, the child can compute the +pointer to itself because the pointer to the base class is always a fixed +offset from the pointer to the derived class. This offset is the offset of the +base class contained in the struct of derived class. + +The example below defines a base class ``shape`` and derived class +``rectangle`` along with class implementations:

.. code-block:: c

@@ -259,8 +261,8 @@ example: self->width = width; }

-In this example, computing the pointer to the child from the pointer to the -parent is done by ``container_of``. +In this example, computing the pointer to ``rectangle`` from the pointer to +the ``shape`` is taken care of by ``container_of`` method.

Faking Classes ~~~~~~~~~~~~~~ @@ -269,11 +271,13 @@ In order to unit test a piece of code that calls a method in a class, the behavior of the method must be controllable, otherwise the test ceases to be a unit test and becomes an integration test.

-A fake class implements a piece of code that is different than what runs in a -production instance, but behaves identical from the standpoint of the callers. -This is done to replace a dependency that is hard to deal with, or is slow. For -example, implementing a fake EEPROM that stores the "contents" in an -internal buffer. Assume we have a class that represents an EEPROM: +A fake class implements a piece of code that interfaces to actual code +used in production. This is done to replace code dependencies that is hard to +deal with (expensive or impossible to duplicate), or is slow. + +The examples below shows how to test fake EEPROM implementation that stores +its contents in an internal buffer. Assume that there is ``eeprom`` class, +which is defined as:

.. code-block:: c

@@ -282,7 +286,8 @@ internal buffer. Assume we have a class that represents an EEPROM: ssize_t (*write)(struct eeprom *this, size_t offset, const char *buffer, size_t count); };

-And we want to test code that buffers writes to the EEPROM: +Supposes that you want to test ``eeprom_buffer`` class, which writes the +contents to actual EEPROM:

.. code-block:: c

@@ -295,7 +300,8 @@ And we want to test code that buffers writes to the EEPROM: struct eeprom_buffer *new_eeprom_buffer(struct eeprom *eeprom); void destroy_eeprom_buffer(struct eeprom *eeprom);

-We can test this code by *faking out* the underlying EEPROM: +In order to test ``eeprom_buffer``, you need *faking out* the underlying +EEPROM with ``fake_eeprom``, which is derived from ``eeprom``:

.. code-block:: c

@@ -331,7 +337,7 @@ We can test this code by *faking out* the underlying EEPROM: memset(this->contents, 0, FAKE_EEPROM_CONTENTS_SIZE); }

-We can now use it to test ``struct eeprom_buffer``: +You can now use it to test ``eeprom_buffer``:

.. code-block:: c

@@ -425,11 +431,12 @@ We can now use it to test ``struct eeprom_buffer``: Testing Against Multiple Inputs -------------------------------

-Testing just a few inputs is not enough to ensure that the code works correctly, -for example: testing a hash function. +Sometimes in order to correctly test the code, many inputs are required. In +such cases, you can write a helper macro or function. The helper can be +called for each test input.

-We can write a helper macro or function. The function is called for each input. -For example, to test ``sha1sum(1)``, we can write: +The following example defines ``TEST_SHA1`` helper macro for testing +:manpage:`sha1sum(1)`. The macro is called on 2 test cases:

.. code-block:: c

@@ -444,12 +451,15 @@ For example, to test ``sha1sum(1)``, we can write: Note the use of the ``_MSG`` version of ``KUNIT_EXPECT_STREQ`` to print a more detailed error and make the assertions clearer within the helper macros.

-The ``_MSG`` variants are useful when the same expectation is called multiple -times (in a loop or helper function) and thus the line number is not enough to -identify what failed, as shown below. +The ``_MSG`` variants are useful when the same expectation is asserted +multiple times (in a loop or helper function), since the line number alone is +not enough to identify the failure, as shown below.

-In complicated cases, we recommend using a *table-driven test* compared to the -helper macro variation, for example: +In complicated cases, it is recommended to use *table-driven test* pattern +instead. + +The following example does the same test as above, but the test cases are +defined in an array of struct:

.. code-block:: c

@@ -478,18 +488,14 @@ helper macro variation, for example: }

-There is more boilerplate code involved, but it can: +There are advantages of *table-driven tests*:

-* be more readable when there are multiple inputs/outputs (due to field names). - - * For example, see ``fs/ext4/inode-test.c``. - -* reduce duplication if test cases are shared across multiple tests. - - * For example: if we want to test ``sha256sum``, we could add a ``sha256`` - field and reuse ``cases``. - -* be converted to a "parameterized test". +* The test is more readable when there are many inputs and expected outputs. + See ``fs/ext4/inode-test.c`` for example. +* It can reduce duplication if test cases are shared across multiple tests. + For example, if you want to also test :manpage:`sha256sum(1)`, you can + simply add ``sha256`` field to ``cases``. +* The test can be turned into "parameterized test", see below subsection.

Parameterized Testing ~~~~~~~~~~~~~~~~~~~~~ @@ -497,8 +503,8 @@ Parameterized Testing The table-driven testing pattern is common enough that KUnit has special support for it.

-By reusing the same ``cases`` array from above, we can write the test as a -"parameterized test" with the following. +The following example does the same :manpage:`sha1sum(1)` test as above, +but is written using parameterized testing facilities:

.. code-block:: c

@@ -526,7 +532,7 @@ By reusing the same ``cases`` array from above, we can write the test as a // Creates `sha1_gen_params()` to iterate over `cases`. KUNIT_ARRAY_PARAM(sha1, cases, case_to_desc);

- // Looks no different from a normal test. + // Looks no different from other tests. static void sha1_test(struct kunit *test) { // This function can just contain the body of the for-loop. @@ -539,7 +545,7 @@ By reusing the same ``cases`` array from above, we can write the test as a "sha1sum(%s)", test_param->str); }

- // Instead of KUNIT_CASE, we use KUNIT_CASE_PARAM and pass in the + // Instead of KUNIT_CASE, use KUNIT_CASE_PARAM and pass in the // function declared by KUNIT_ARRAY_PARAM. static struct kunit_case sha1_test_cases[] = { KUNIT_CASE_PARAM(sha1_test, sha1_gen_params), @@ -549,9 +555,13 @@ By reusing the same ``cases`` array from above, we can write the test as a Exiting Early on Failed Expectations ------------------------------------

-We can use ``KUNIT_EXPECT_EQ`` to mark the test as failed and continue -execution. In some cases, it is unsafe to continue. We can use the -``KUNIT_ASSERT`` variant to exit on failure. +All the tests until now uses ``KUNIT_EXPECT`` macros to assert expectations. +In case of any of these are failed, the test continues. However, in some +cases, continuing tests is not possible or is unsafe. For these cases, +you can use ``KUNIT_ASSERT`` variant to exit early on failure. + +The example below tests allocating objects then play with them. Only if +the allocation succeed, these objects can be played with:

.. code-block:: c

@@ -567,12 +577,15 @@ execution. In some cases, it is unsafe to continue. We can use the Allocating Memory -----------------

-Where you might use ``kzalloc``, you can instead use ``kunit_kzalloc`` as KUnit -will then ensure that the memory is freed once the test completes. +When ``kzalloc`` may be used to allocate memory, you can instead use +``kunit_kzalloc`` as KUnit will then ensure that the memory is freed once +the test completes.

-This is useful because it lets us use the ``KUNIT_ASSERT_EQ`` macros to exit -early from a test without having to worry about remembering to call ``kfree``. -For example: +This is useful because it lets you to use ``KUNIT_ASSERT_EQ`` macros to exit +early from a test without having to worry about remembering to freeing +memory with ``kfree``. + +The following example tests allocating buffer memory:

.. code-block:: c

@@ -589,9 +602,11 @@ For example: Testing Static Functions ------------------------

-If we do not want to expose functions or variables for testing, one option is to -conditionally ``#include`` the test file at the end of your .c file. For -example: +If you do not want to expose testing functions or variables unconditionally, +you can ``#include`` the test file inside ``#ifdef`` guard. + +In the example below, the test code in ``my_kunit_test.c`` is included and +compiled only if ``CONFIG_MY_KUNIT_TEST`` is enabled:

.. code-block:: c

@@ -606,7 +621,11 @@ example: Injecting Test-Only Code ------------------------

-Similar to as shown above, we can add test-specific logic. For example: +You can also add test-only logic inside the guard. + +In the following example, prototype of ``test_only_hook()`` is defined with +``CONFIG_MY_KUNIT_TEST`` both enabled and disabled. In case the configuration +is disabled, the hook is defined as empty function:

.. code-block:: c

@@ -619,19 +638,21 @@ Similar to as shown above, we can add test-specific logic. For example: void test_only_hook(void) { } #endif

-This test-only code can be made more useful by accessing the current ``kunit_test`` -as shown in next section: *Accessing The Current Test*. +This can be made more useful by accessing the current ``kunit_test`` +as shown in next section below.

Accessing The Current Test --------------------------

-In some cases, we need to call test-only code from outside the test file. -For example, see example in section *Injecting Test-Only Code* or if -we are providing a fake implementation of an ops struct. Using -``kunit_test`` field in ``task_struct``, we can access it via -``current->kunit_test``. +In some cases, it is desired to call test-only code from outside the test +file. See example from previous section for how this can be done by +including the test file.

-The example below includes how to implement "mocking": +Another way is to provide the fake implementation of an ops struct. For +example, given ``kunit_test`` field in ``task_struct``, the field can be +accessed via ``current->kunit_test``. + +The example below shows how to implement "mocking" pattern:

.. code-block:: c

@@ -665,25 +686,28 @@ The example below includes how to implement "mocking": KUNIT_EXPECT_EQ(test, fake_foo(1), 42); }

-In this example, we are using the ``priv`` member of ``struct kunit`` as a way +In this example, ``kunit->priv`` is used as a way of passing data to the test from the init function. In general ``priv`` is pointer that can be used for any user data. This is preferred over static variables, as it avoids concurrency issues.

-Had we wanted something more flexible, we could have used a named ``kunit_resource``. -Each test can have multiple resources which have string names providing the same -flexibility as a ``priv`` member, but also, for example, allowing helper +In cases where you want something more flexible, ``kunit_resource`` can be +used instead. Each test can have multiple resources which have names providing +the same flexibility as ``priv``, but also, for example, allowing helper functions to create resources without conflicting with each other. It is also -possible to define a clean up function for each resource, making it easy to -avoid resource leaks. For more information, see Documentation/dev-tools/kunit/api/test.rst. +possible to define clean up routines for each resource, making it easy to +avoid leaking. For more information, see +Documentation/dev-tools/kunit/api/test.rst.

Failing The Current Test ------------------------

-If we want to fail the current test, we can use ``kunit_fail_current_test(fmt, args...)`` -which is defined in ``<kunit/test-bug.h>`` and does not require pulling in ``<kunit/test.h>``. -For example, we have an option to enable some extra debug checks on some data -structures as shown below: +If you want to fail the current test with a meaningful reason, you can use +``kunit_fail_current_test()``, which is defined in ``<kunit/test-bug.h>``. +It does not require pulling in ``<kunit/test.h>``. + +The following example have the extra validation over ``data`` struct, which +is only done when ``CONFIG_EXTRA_DEBUG_CHECKS`` is enabled:

.. code-block:: c