Rename some test cases to avoid overlapping test names which is problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu yujie.liu@intel.com Signed-off-by: Ido Schimmel idosch@nvidia.com --- Yujie Liu, please verify this works for you. --- tools/testing/selftests/net/test_vxlan_mdb.sh | 36 +++++++++---------- 1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh index 84a05a9e46d8..74ff9fb2a6f0 100755 --- a/tools/testing/selftests/net/test_vxlan_mdb.sh +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh @@ -1014,10 +1014,10 @@ flush()
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by port" + log_test $? 254 "Flush by port - matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0" - log_test $? 255 "Flush by wrong port" + log_test $? 255 "Flush by port - non-matching"
# Check that when flushing by source VNI only entries programmed with # the specified source VNI are flushed and the rest are not. @@ -1030,9 +1030,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by specified source VNI" + log_test $? 254 "Flush by source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011" - log_test $? 0 "Flush by unspecified source VNI" + log_test $? 0 "Flush by source VNI - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1058,9 +1058,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "proto bgp"" - log_test $? 1 "Flush by specified routing protocol" + log_test $? 1 "Flush by routing protocol - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "proto zebra"" - log_test $? 0 "Flush by unspecified routing protocol" + log_test $? 0 "Flush by routing protocol - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1075,9 +1075,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 1 "Flush by specified destination IP - IPv4" + log_test $? 1 "Flush by IPv4 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 0 "Flush by unspecified destination IP - IPv4" + log_test $? 0 "Flush by IPv4 destination IP - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1089,9 +1089,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2" - log_test $? 1 "Flush by specified destination IP - IPv6" + log_test $? 1 "Flush by IPv6 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1" - log_test $? 0 "Flush by unspecified destination IP - IPv6" + log_test $? 0 "Flush by IPv6 destination IP - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1104,9 +1104,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "dst_port 11111"" - log_test $? 1 "Flush by specified UDP destination port" + log_test $? 1 "Flush by UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "dst_port 22222"" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by UDP destination port - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1121,9 +1121,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by device's UDP destination port" + log_test $? 1 "Flush by device's UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by device's UDP destination port - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1136,9 +1136,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep " vni 20010"" - log_test $? 1 "Flush by specified destination VNI" + log_test $? 1 "Flush by destination VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep " vni 20011"" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
@@ -1153,9 +1153,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010"
run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by destination VNI equal to source VNI" + log_test $? 1 "Flush by destination VNI equal to source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching"
run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski kuba@kernel.org:
On Tue, 27 Feb 2024 19:04:18 +0200 you wrote:
Rename some test cases to avoid overlapping test names which is problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu yujie.liu@intel.com Signed-off-by: Ido Schimmel idosch@nvidia.com
Yujie Liu, please verify this works for you.
[...]
Here is the summary with links: - [net-next] selftests: vxlan_mdb: Avoid duplicate test names https://git.kernel.org/netdev/net-next/c/8a7746982ed7
You are awesome, thank you!
Hi Ido,
On Tue, 2024-02-27 at 19:04 +0200, Ido Schimmel wrote:
Rename some test cases to avoid overlapping test names which is problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu yujie.liu@intel.com Signed-off-by: Ido Schimmel idosch@nvidia.com
Yujie Liu, please verify this works for you.
This patch works well in the kernel test robot. Now there is no problem of overlapping test names. Thanks.
Tested-by: Yujie Liu yujie.liu@intel.com
# Control path: Flush # ------------------- # TEST: Flush all [ OK ] # TEST: Flush by port - matching [ OK ] # TEST: Flush by port - non-matching [ OK ] # TEST: Flush by source VNI - matching [ OK ] # TEST: Flush by source VNI - non-matching [ OK ] # TEST: Flush by "permanent" state [ OK ] # TEST: Flush by "nopermanent" state [ OK ] # TEST: Flush by routing protocol - matching [ OK ] # TEST: Flush by routing protocol - non-matching [ OK ] # TEST: Flush by IPv4 destination IP - matching [ OK ] # TEST: Flush by IPv4 destination IP - non-matching [ OK ] # TEST: Flush by IPv6 destination IP - matching [ OK ] # TEST: Flush by IPv6 destination IP - non-matching [ OK ] # TEST: Flush by UDP destination port - matching [ OK ] # TEST: Flush by UDP destination port - non-matching [ OK ] # TEST: Flush by device's UDP destination port - matching [ OK ] # TEST: Flush by device's UDP destination port - non-matching [ OK ] # TEST: Flush by destination VNI - matching [ OK ] # TEST: Flush by destination VNI - non-matching [ OK ] # TEST: Flush by destination VNI equal to source VNI - matching [ OK ] # TEST: Flush by destination VNI equal to source VNI - non-matching [ OK ] # TEST: Flush by VLAN ID [ OK ]
tools/testing/selftests/net/test_vxlan_mdb.sh | 36 +++++++++---------- 1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh index 84a05a9e46d8..74ff9fb2a6f0 100755 --- a/tools/testing/selftests/net/test_vxlan_mdb.sh +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh @@ -1014,10 +1014,10 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by port" + log_test $? 254 "Flush by port - matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0" - log_test $? 255 "Flush by wrong port" + log_test $? 255 "Flush by port - non-matching" # Check that when flushing by source VNI only entries programmed with # the specified source VNI are flushed and the rest are not. @@ -1030,9 +1030,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by specified source VNI" + log_test $? 254 "Flush by source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011" - log_test $? 0 "Flush by unspecified source VNI" + log_test $? 0 "Flush by source VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1058,9 +1058,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "proto bgp"" - log_test $? 1 "Flush by specified routing protocol" + log_test $? 1 "Flush by routing protocol - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "proto zebra"" - log_test $? 0 "Flush by unspecified routing protocol" + log_test $? 0 "Flush by routing protocol - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1075,9 +1075,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 1 "Flush by specified destination IP - IPv4" + log_test $? 1 "Flush by IPv4 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 0 "Flush by unspecified destination IP - IPv4" + log_test $? 0 "Flush by IPv4 destination IP - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1089,9 +1089,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2" - log_test $? 1 "Flush by specified destination IP - IPv6" + log_test $? 1 "Flush by IPv6 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1" - log_test $? 0 "Flush by unspecified destination IP - IPv6" + log_test $? 0 "Flush by IPv6 destination IP - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1104,9 +1104,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "dst_port 11111"" - log_test $? 1 "Flush by specified UDP destination port" + log_test $? 1 "Flush by UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep "dst_port 22222"" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by UDP destination port - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1121,9 +1121,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by device's UDP destination port" + log_test $? 1 "Flush by device's UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by device's UDP destination port - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1136,9 +1136,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep " vni 20010"" - log_test $? 1 "Flush by specified destination VNI" + log_test $? 1 "Flush by destination VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep " vni 20011"" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1153,9 +1153,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by destination VNI equal to source VNI" + log_test $? 1 "Flush by destination VNI equal to source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
linux-kselftest-mirror@lists.linaro.org
-
Ido Schimmel -
Liu, Yujie -
patchwork-bot+netdevbpf＠kernel.org