[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a number of paths and identifiers in libbpf GitHub repo, which vmtest.sh relies upon. Update these and make use of the new s390 support.
[1] https://github.com/libbpf/libbpf/pull/204
Co-developed-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com --- tools/testing/selftests/bpf/vmtest.sh | 46 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 15 deletions(-)
diff --git a/tools/testing/selftests/bpf/vmtest.sh b/tools/testing/selftests/bpf/vmtest.sh index 027198768fad..5e43c79ddc6e 100755 --- a/tools/testing/selftests/bpf/vmtest.sh +++ b/tools/testing/selftests/bpf/vmtest.sh @@ -4,17 +4,34 @@ set -u set -e
-# This script currently only works for x86_64, as -# it is based on the VM image used by the BPF CI which is -# x86_64. -QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}" -X86_BZIMAGE="arch/x86/boot/bzImage" +# This script currently only works for x86_64 and s390x, as +# it is based on the VM image used by the BPF CI, which is +# available only for these architectures. +ARCH="$(uname -m)" +case "${ARCH}" in +s390x) + QEMU_BINARY=qemu-system-s390x + QEMU_CONSOLE="ttyS1" + QEMU_FLAGS=(-smp 2) + BZIMAGE="arch/s390/boot/compressed/vmlinux" + ;; +x86_64) + QEMU_BINARY=qemu-system-x86_64 + QEMU_CONSOLE="ttyS0,115200" + QEMU_FLAGS=(-cpu host -smp 8) + BZIMAGE="arch/x86/boot/bzImage" + ;; +*) + echo "Unsupported architecture" + exit 1 + ;; +esac DEFAULT_COMMAND="./test_progs" MOUNT_DIR="mnt" ROOTFS_IMAGE="root.img" OUTPUT_DIR="$HOME/.bpf_selftests" -KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." -KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." +KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." +KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." NUM_COMPILE_JOBS="$(nproc)" LOG_FILE_BASE="$(date +"bpf_selftests.%Y-%m-%d_%H-%M-%S")" @@ -85,7 +102,7 @@ newest_rootfs_version() { { for file in "${!URLS[@]}"; do - if [[ $file =~ ^libbpf-vmtest-rootfs-(.*).tar.zst$ ]]; then + if [[ $file =~ ^"${ARCH}"/libbpf-vmtest-rootfs-(.*).tar.zst$ ]]; then echo "${BASH_REMATCH[1]}" fi done @@ -102,7 +119,7 @@ download_rootfs() exit 1 fi
- download "libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | + download "${ARCH}/libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | zstd -d | sudo tar -C "$dir" -x }
@@ -224,13 +241,12 @@ EOF -nodefaults \ -display none \ -serial mon:stdio \ - -cpu host \ + "${qemu_flags[@]}" \ -enable-kvm \ - -smp 8 \ -m 4G \ -drive file="${rootfs_img}",format=raw,index=1,media=disk,if=virtio,cache=none \ -kernel "${kernel_bzimage}" \ - -append "root=/dev/vda rw console=ttyS0,115200" + -append "root=/dev/vda rw console=${QEMU_CONSOLE}" }
copy_logs() @@ -282,7 +298,7 @@ main() local kernel_checkout=$(realpath "${script_dir}"/../../../../) # By default the script searches for the kernel in the checkout directory but # it also obeys environment variables O= and KBUILD_OUTPUT= - local kernel_bzimage="${kernel_checkout}/${X86_BZIMAGE}" + local kernel_bzimage="${kernel_checkout}/${BZIMAGE}" local command="${DEFAULT_COMMAND}" local update_image="no" local exit_command="poweroff -f" @@ -337,13 +353,13 @@ main() if is_rel_path "${O}"; then O="$(realpath "${PWD}/${O}")" fi - kernel_bzimage="${O}/${X86_BZIMAGE}" + kernel_bzimage="${O}/${BZIMAGE}" make_command="${make_command} O=${O}" elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then if is_rel_path "${KBUILD_OUTPUT}"; then KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")" fi - kernel_bzimage="${KBUILD_OUTPUT}/${X86_BZIMAGE}" + kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}" make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}" fi
On Thu, Nov 18, 2021 at 3:52 AM Ilya Leoshkevich iii@linux.ibm.com wrote:
[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a number of paths and identifiers in libbpf GitHub repo, which vmtest.sh relies upon. Update these and make use of the new s390 support.
[1] https://github.com/libbpf/libbpf/pull/204
Co-developed-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com
Thanks for the quick fix! I did rm -r ~/.bpf_selftest (though I thought I did that with my changes as well, whatever) before running vmtest.sh. It all worked. I got three test failures which is strange, because I don't get those failures in my custom and more complete QEMU image, so it's strange, if anyone has any ideas and is willing to help debug this, it would be greatly appreciated.
But either way, this fixes immediate problems with vmtest.sh, pushed to bpf-next. Thanks!
All error logs:
#17 btf_map_in_map:FAIL test_lookup_update:PASS:skel_open 0 nsec test_lookup_update:PASS:skel_attach 0 nsec test_lookup_update:PASS:inner1 0 nsec test_lookup_update:PASS:inner2 0 nsec test_lookup_update:PASS:inner3 0 nsec test_lookup_update:PASS:inner1 0 nsec test_lookup_update:PASS:inner2 0 nsec test_lookup_update:PASS:inner4 0 nsec test_lookup_update:PASS:inner5 0 nsec test_lookup_update:PASS:map1_id 0 nsec test_lookup_update:PASS:map2_id 0 nsec test_lookup_update:PASS:sync_rcu 0 nsec test_lookup_update:PASS:sync_rcu 0 nsec test_lookup_update:FAIL:map1_leak inner_map1 leaked! #17/1 btf_map_in_map/lookup_update:FAIL test_diff_size:PASS:skel_open 0 nsec test_diff_size:PASS:outer_sockarr inner map size check 0 nsec test_diff_size:PASS:outer_arr inner map size check 0 nsec #17/2 btf_map_in_map/diff_size:OK
#147 task_local_storage:FAIL test_sys_enter_exit:PASS:skel_open_and_load 0 nsec test_sys_enter_exit:PASS:skel_attach 0 nsec test_sys_enter_exit:PASS:enter_cnt 0 nsec test_sys_enter_exit:PASS:exit_cnt 0 nsec test_sys_enter_exit:PASS:mismatch_cnt 0 nsec #147/1 task_local_storage/sys_enter_exit:OK test_exit_creds:PASS:skel_open_and_load 0 nsec test_exit_creds:PASS:skel_attach 0 nsec test_exit_creds:PASS:valid_ptr_count 0 nsec test_exit_creds:FAIL:null_ptr_count unexpected null_ptr_count: actual 0 == expected 0 #147/2 task_local_storage/exit_creds:FAIL test_recursion:PASS:skel_open_and_load 0 nsec test_recursion:PASS:skel_attach 0 nsec #147/3 task_local_storage/recursion:OK
#155 test_bpffs:FAIL test_test_bpffs:PASS:clone 0 nsec test_test_bpffs:PASS:waitpid 0 nsec test_test_bpffs:FAIL:bpffs test failed 255 Summary: 209/967 PASSED, 10 SKIPPED, 3 FAILED
tools/testing/selftests/bpf/vmtest.sh | 46 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 15 deletions(-)
diff --git a/tools/testing/selftests/bpf/vmtest.sh b/tools/testing/selftests/bpf/vmtest.sh index 027198768fad..5e43c79ddc6e 100755 --- a/tools/testing/selftests/bpf/vmtest.sh +++ b/tools/testing/selftests/bpf/vmtest.sh @@ -4,17 +4,34 @@ set -u set -e
-# This script currently only works for x86_64, as -# it is based on the VM image used by the BPF CI which is -# x86_64. -QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}" -X86_BZIMAGE="arch/x86/boot/bzImage" +# This script currently only works for x86_64 and s390x, as +# it is based on the VM image used by the BPF CI, which is +# available only for these architectures. +ARCH="$(uname -m)" +case "${ARCH}" in +s390x)
QEMU_BINARY=qemu-system-s390xQEMU_CONSOLE="ttyS1"QEMU_FLAGS=(-smp 2)BZIMAGE="arch/s390/boot/compressed/vmlinux";;+x86_64)
QEMU_BINARY=qemu-system-x86_64QEMU_CONSOLE="ttyS0,115200"QEMU_FLAGS=(-cpu host -smp 8)BZIMAGE="arch/x86/boot/bzImage";;+*)
echo "Unsupported architecture"exit 1;;+esac DEFAULT_COMMAND="./test_progs" MOUNT_DIR="mnt" ROOTFS_IMAGE="root.img" OUTPUT_DIR="$HOME/.bpf_selftests" -KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." -KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." +KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." +KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." NUM_COMPILE_JOBS="$(nproc)" LOG_FILE_BASE="$(date +"bpf_selftests.%Y-%m-%d_%H-%M-%S")" @@ -85,7 +102,7 @@ newest_rootfs_version() { { for file in "${!URLS[@]}"; do
if [[ $file =~ ^libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then
if [[ $file =~ ^"${ARCH}"/libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then echo "${BASH_REMATCH[1]}" fi done@@ -102,7 +119,7 @@ download_rootfs() exit 1 fi
download "libbpf-vmtest-rootfs-$rootfsversion.tar.zst" |
download "${ARCH}/libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | zstd -d | sudo tar -C "$dir" -x}
@@ -224,13 +241,12 @@ EOF -nodefaults \ -display none \ -serial mon:stdio \
-cpu host \
"${qemu_flags[@]}" \ -enable-kvm \
-smp 8 \ -m 4G \ -drive file="${rootfs_img}",format=raw,index=1,media=disk,if=virtio,cache=none \ -kernel "${kernel_bzimage}" \-append "root=/dev/vda rw console=ttyS0,115200"
-append "root=/dev/vda rw console=${QEMU_CONSOLE}"}
copy_logs() @@ -282,7 +298,7 @@ main() local kernel_checkout=$(realpath "${script_dir}"/../../../../) # By default the script searches for the kernel in the checkout directory but # it also obeys environment variables O= and KBUILD_OUTPUT=
local kernel_bzimage="${kernel_checkout}/${X86_BZIMAGE}"
local kernel_bzimage="${kernel_checkout}/${BZIMAGE}" local command="${DEFAULT_COMMAND}" local update_image="no" local exit_command="poweroff -f"@@ -337,13 +353,13 @@ main() if is_rel_path "${O}"; then O="$(realpath "${PWD}/${O}")" fi
kernel_bzimage="${O}/${X86_BZIMAGE}"
kernel_bzimage="${O}/${BZIMAGE}" make_command="${make_command} O=${O}" elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then if is_rel_path "${KBUILD_OUTPUT}"; then KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")" fi
kernel_bzimage="${KBUILD_OUTPUT}/${X86_BZIMAGE}"
kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}" make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}" fi-- 2.31.1
Hello:
This patch was applied to bpf/bpf-next.git (master) by Andrii Nakryiko andrii@kernel.org:
On Thu, 18 Nov 2021 12:52:25 +0100 you wrote:
[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a number of paths and identifiers in libbpf GitHub repo, which vmtest.sh relies upon. Update these and make use of the new s390 support.
[1] https://github.com/libbpf/libbpf/pull/204
Co-developed-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com
[...]
Here is the summary with links: - [bpf] selfetests/bpf: Adapt vmtest.sh to s390 libbpf CI changes https://git.kernel.org/bpf/bpf-next/c/29ad850a5cae
You are awesome, thank you!
On Thu, Nov 18, 2021 at 3:54 AM Ilya Leoshkevich iii@linux.ibm.com wrote:
[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a number of paths and identifiers in libbpf GitHub repo, which vmtest.sh relies upon. Update these and make use of the new s390 support.
[1] https://github.com/libbpf/libbpf/pull/204
Co-developed-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com
tools/testing/selftests/bpf/vmtest.sh | 46 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 15 deletions(-)
diff --git a/tools/testing/selftests/bpf/vmtest.sh b/tools/testing/selftests/bpf/vmtest.sh index 027198768fad..5e43c79ddc6e 100755 --- a/tools/testing/selftests/bpf/vmtest.sh +++ b/tools/testing/selftests/bpf/vmtest.sh @@ -4,17 +4,34 @@ set -u set -e
-# This script currently only works for x86_64, as -# it is based on the VM image used by the BPF CI which is -# x86_64. -QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}" -X86_BZIMAGE="arch/x86/boot/bzImage" +# This script currently only works for x86_64 and s390x, as +# it is based on the VM image used by the BPF CI, which is +# available only for these architectures. +ARCH="$(uname -m)" +case "${ARCH}" in +s390x)
QEMU_BINARY=qemu-system-s390xQEMU_CONSOLE="ttyS1"QEMU_FLAGS=(-smp 2)BZIMAGE="arch/s390/boot/compressed/vmlinux";;+x86_64)
QEMU_BINARY=qemu-system-x86_64QEMU_CONSOLE="ttyS0,115200"QEMU_FLAGS=(-cpu host -smp 8)BZIMAGE="arch/x86/boot/bzImage";;+*)
echo "Unsupported architecture"exit 1;;+esac DEFAULT_COMMAND="./test_progs" MOUNT_DIR="mnt" ROOTFS_IMAGE="root.img" OUTPUT_DIR="$HOME/.bpf_selftests" -KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." -KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." +KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." +KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/configs..." INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/conf..." NUM_COMPILE_JOBS="$(nproc)" LOG_FILE_BASE="$(date +"bpf_selftests.%Y-%m-%d_%H-%M-%S")" @@ -85,7 +102,7 @@ newest_rootfs_version() { { for file in "${!URLS[@]}"; do
if [[ $file =~ ^libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then
if [[ $file =~ ^"${ARCH}"/libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then echo "${BASH_REMATCH[1]}" fi done@@ -102,7 +119,7 @@ download_rootfs() exit 1 fi
download "libbpf-vmtest-rootfs-$rootfsversion.tar.zst" |
download "${ARCH}/libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | zstd -d | sudo tar -C "$dir" -x}
@@ -224,13 +241,12 @@ EOF -nodefaults \ -display none \ -serial mon:stdio \
-cpu host \
"${qemu_flags[@]}" \ -enable-kvm \
-smp 8 \ -m 4G \ -drive file="${rootfs_img}",format=raw,index=1,media=disk,if=virtio,cache=none \ -kernel "${kernel_bzimage}" \-append "root=/dev/vda rw console=ttyS0,115200"
-append "root=/dev/vda rw console=${QEMU_CONSOLE}"}
copy_logs() @@ -282,7 +298,7 @@ main() local kernel_checkout=$(realpath "${script_dir}"/../../../../) # By default the script searches for the kernel in the checkout directory but # it also obeys environment variables O= and KBUILD_OUTPUT=
local kernel_bzimage="${kernel_checkout}/${X86_BZIMAGE}"
local kernel_bzimage="${kernel_checkout}/${BZIMAGE}" local command="${DEFAULT_COMMAND}" local update_image="no" local exit_command="poweroff -f"@@ -337,13 +353,13 @@ main() if is_rel_path "${O}"; then O="$(realpath "${PWD}/${O}")" fi
kernel_bzimage="${O}/${X86_BZIMAGE}"
kernel_bzimage="${O}/${BZIMAGE}" make_command="${make_command} O=${O}" elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then if is_rel_path "${KBUILD_OUTPUT}"; then KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")" fi
kernel_bzimage="${KBUILD_OUTPUT}/${X86_BZIMAGE}"
kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}" make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}" fi-- 2.31.1
Acked-By: Yucong Sun sunyucong@gmail.com
linux-kselftest-mirror@lists.linaro.org
-
Andrii Nakryiko -
Ilya Leoshkevich -
patchwork-bot+netdevbpf＠kernel.org -
sunyucong＠gmail.com