The active-backup bonding mode supports XFRM ESP offload. However, when a bond is added using command like `ip link add bond0 type bond mode 1 miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is disabled. This occurs because, in bond_newlink(), we change bond link first and register bond device later. So the XFRM feature update in bond_option_mode_set() is not called as the bond device is not yet registered, leading to the offload feature not being set successfully.
To resolve this issue, we can modify the code order in bond_newlink() to ensure that the bond device is registered first before changing the bond link parameters. This change will allow the XFRM ESP offload feature to be correctly enabled.
Fixes: 007ab5345545 ("bonding: fix feature flag setting at init time") Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- v2: rebase to latest net, no code update --- drivers/net/bonding/bond_main.c | 2 +- drivers/net/bonding/bond_netlink.c | 16 +++++++++------- include/net/bonding.h | 1 + 3 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 57be04f6cb11..f4f0feddd9fa 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4411,7 +4411,7 @@ void bond_work_init_all(struct bonding *bond) INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler); }
-static void bond_work_cancel_all(struct bonding *bond) +void bond_work_cancel_all(struct bonding *bond) { cancel_delayed_work_sync(&bond->mii_work); cancel_delayed_work_sync(&bond->arp_work); diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index 57fff2421f1b..7a9d73ec8e91 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -579,20 +579,22 @@ static int bond_newlink(struct net_device *bond_dev, struct rtnl_newlink_params *params, struct netlink_ext_ack *extack) { + struct bonding *bond = netdev_priv(bond_dev); struct nlattr **data = params->data; struct nlattr **tb = params->tb; int err;
- err = bond_changelink(bond_dev, tb, data, extack); - if (err < 0) + err = register_netdevice(bond_dev); + if (err) return err;
- err = register_netdevice(bond_dev); - if (!err) { - struct bonding *bond = netdev_priv(bond_dev); + netif_carrier_off(bond_dev); + bond_work_init_all(bond);
- netif_carrier_off(bond_dev); - bond_work_init_all(bond); + err = bond_changelink(bond_dev, tb, data, extack); + if (err) { + bond_work_cancel_all(bond); + unregister_netdevice(bond_dev); }
return err; diff --git a/include/net/bonding.h b/include/net/bonding.h index e06f0d63b2c1..bd56ad976cfb 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -711,6 +711,7 @@ struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev, int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave); void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay); void bond_work_init_all(struct bonding *bond); +void bond_work_cancel_all(struct bonding *bond);
#ifdef CONFIG_PROC_FS void bond_create_proc_entry(struct bonding *bond);
This introduces a test for IPSec offload over bonding, utilizing netdevsim for the testing process, as veth interfaces do not support IPSec offload. The test will ensure that the IPSec offload functionality remains operational even after a failover event occurs in the bonding configuration.
Here is the test result:
TEST: bond_ipsec_offload (active_slave eth0) [ OK ] TEST: bond_ipsec_offload (active_slave eth1) [ OK ]
Reviewed-by: Petr Machata petrm@nvidia.com Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- v2: rebase to latest net, no code update --- .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_ipsec_offload.sh | 154 ++++++++++++++++++ .../selftests/drivers/net/bonding/config | 4 + 3 files changed, 160 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 44b98f17f8ff..c13ef40e7db1 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -11,7 +11,8 @@ TEST_PROGS := \ bond_options.sh \ bond-eth-type-change.sh \ bond_macvlan_ipvlan.sh \ - bond_passive_lacp.sh + bond_passive_lacp.sh \ + bond_ipsec_offload.sh
TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh b/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh new file mode 100755 index 000000000000..4b19949a4c33 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh @@ -0,0 +1,154 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# IPsec over bonding offload test: +# +# +----------------+ +# | bond0 | +# | | | +# | eth0 eth1 | +# +---+-------+----+ +# +# We use netdevsim instead of physical interfaces +#------------------------------------------------------------------- +# Example commands +# ip x s add proto esp src 192.0.2.1 dst 192.0.2.2 \ +# spi 0x07 mode transport reqid 0x07 replay-window 32 \ +# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ +# sel src 192.0.2.1/24 dst 192.0.2.2/24 +# offload dev bond0 dir out +# ip x p add dir out src 192.0.2.1/24 dst 192.0.2.2/24 \ +# tmpl proto esp src 192.0.2.1 dst 192.0.2.2 \ +# spi 0x07 mode transport reqid 0x07 +# +#------------------------------------------------------------------- + +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/lib.sh +algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" +srcip=192.0.2.1 +dstip=192.0.2.2 +ipsec0=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec +ipsec1=/sys/kernel/debug/netdevsim/netdevsim0/ports/1/ipsec +active_slave="" + +active_slave_changed() +{ + local old_active_slave=$1 + local new_active_slave=$(ip -n ${ns} -d -j link show bond0 | \ + jq -r ".[].linkinfo.info_data.active_slave") + [ "$new_active_slave" != "$old_active_slave" -a "$new_active_slave" != "null" ] +} + +test_offload() +{ + # use ping to exercise the Tx path + ip netns exec $ns ping -I bond0 -c 3 -W 1 -i 0 $dstip >/dev/null + + active_slave=$(ip -n ${ns} -d -j link show bond0 | \ + jq -r ".[].linkinfo.info_data.active_slave") + + if [ $active_slave = $nic0 ]; then + sysfs=$ipsec0 + elif [ $active_slave = $nic1 ]; then + sysfs=$ipsec1 + else + check_err 1 "bond_ipsec_offload invalid active_slave $active_slave" + fi + + # The tx/rx order in sysfs may changed after failover + grep -q "SA count=2 tx=3" $sysfs && grep -q "tx ipaddr=$dstip" $sysfs + check_err $? "incorrect tx count with link ${active_slave}" + + log_test bond_ipsec_offload "active_slave ${active_slave}" +} + +setup_env() +{ + if ! mount | grep -q debugfs; then + mount -t debugfs none /sys/kernel/debug/ &> /dev/null + defer umount /sys/kernel/debug/ + + fi + + # setup netdevsim since dummy/veth dev doesn't have offload support + if [ ! -w /sys/bus/netdevsim/new_device ] ; then + modprobe -q netdevsim + if [ $? -ne 0 ]; then + echo "SKIP: can't load netdevsim for ipsec offload" + exit $ksft_skip + fi + defer modprobe -r netdevsim + fi + + setup_ns ns + defer cleanup_ns $ns +} + +setup_bond() +{ + ip -n $ns link add bond0 type bond mode active-backup miimon 100 + ip -n $ns addr add $srcip/24 dev bond0 + ip -n $ns link set bond0 up + + ifaces=$(ip netns exec $ns bash -c ' + sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/ + echo "0 2" > /sys/bus/netdevsim/new_device + while [ ! -d $sysfsnet ] ; do :; done + udevadm settle + ls $sysfsnet + ') + nic0=$(echo $ifaces | cut -f1 -d ' ') + nic1=$(echo $ifaces | cut -f2 -d ' ') + ip -n $ns link set $nic0 master bond0 + ip -n $ns link set $nic1 master bond0 + + # we didn't create a peer, make sure we can Tx by adding a permanent + # neighbour this need to be added after enslave + ip -n $ns neigh add $dstip dev bond0 lladdr 00:11:22:33:44:55 + + # create offloaded SAs, both in and out + ip -n $ns x p add dir out src $srcip/24 dst $dstip/24 \ + tmpl proto esp src $srcip dst $dstip spi 9 \ + mode transport reqid 42 + + ip -n $ns x p add dir in src $dstip/24 dst $srcip/24 \ + tmpl proto esp src $dstip dst $srcip spi 9 \ + mode transport reqid 42 + + ip -n $ns x s add proto esp src $srcip dst $dstip spi 9 \ + mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \ + offload dev bond0 dir out + + ip -n $ns x s add proto esp src $dstip dst $srcip spi 9 \ + mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \ + offload dev bond0 dir in + + # does offload show up in ip output + lines=`ip -n $ns x s list | grep -c "crypto offload parameters: dev bond0 dir"` + if [ $lines -ne 2 ] ; then + check_err 1 "bond_ipsec_offload SA offload missing from list output" + fi +} + +trap defer_scopes_cleanup EXIT +setup_env +setup_bond + +# start Offload testing +test_offload + +# do failover and re-test +ip -n $ns link set $active_slave down +slowwait 5 active_slave_changed $active_slave +test_offload + +# make sure offload get removed from driver +ip -n $ns x s flush +ip -n $ns x p flush +line0=$(grep -c "SA count=0" $ipsec0) +line1=$(grep -c "SA count=0" $ipsec1) +[ $line0 -ne 1 -o $line1 -ne 1 ] +check_fail $? "bond_ipsec_offload SA not removed from driver" + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config index 832fa1caeb66..e5b7a8db4dfa 100644 --- a/tools/testing/selftests/drivers/net/bonding/config +++ b/tools/testing/selftests/drivers/net/bonding/config @@ -11,3 +11,7 @@ CONFIG_NET_SCH_INGRESS=y CONFIG_NLMON=y CONFIG_VETH=y CONFIG_VLAN_8021Q=m +CONFIG_INET_ESP=y +CONFIG_INET_ESP_OFFLOAD=y +CONFIG_XFRM_USER=m +CONFIG_NETDEVSIM=m
On 9/18/25 4:02 AM, Hangbin Liu wrote:
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh b/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh new file mode 100755 index 000000000000..4b19949a4c33 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh @@ -0,0 +1,154 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0
+# IPsec over bonding offload test: +# +# +----------------+ +# | bond0 | +# | | | +# | eth0 eth1 | +# +---+-------+----+ +# +# We use netdevsim instead of physical interfaces +#------------------------------------------------------------------- +# Example commands +# ip x s add proto esp src 192.0.2.1 dst 192.0.2.2 \ +# spi 0x07 mode transport reqid 0x07 replay-window 32 \ +# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ +# sel src 192.0.2.1/24 dst 192.0.2.2/24 +# offload dev bond0 dir out +# ip x p add dir out src 192.0.2.1/24 dst 192.0.2.2/24 \ +# tmpl proto esp src 192.0.2.1 dst 192.0.2.2 \ +# spi 0x07 mode transport reqid 0x07 +# +#-------------------------------------------------------------------
+lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/lib.sh +algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" +srcip=192.0.2.1 +dstip=192.0.2.2 +ipsec0=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec +ipsec1=/sys/kernel/debug/netdevsim/netdevsim0/ports/1/ipsec +active_slave=""
+active_slave_changed() +{
local old_active_slave=$1local new_active_slave=$(ip -n ${ns} -d -j link show bond0 | \jq -r ".[].linkinfo.info_data.active_slave")
shell check is not super happy about the lack of double quotes around the variables (above and many places below) and about declaring the variable and assigning it to a subshell in the same statement.
I think it's better to address such warnings for consistency.
Thanks,
Paolo
On Tue, Sep 23, 2025 at 10:32:22AM +0200, Paolo Abeni wrote:
+lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/lib.sh +algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" +srcip=192.0.2.1 +dstip=192.0.2.2 +ipsec0=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec +ipsec1=/sys/kernel/debug/netdevsim/netdevsim0/ports/1/ipsec +active_slave=""
+active_slave_changed() +{
local old_active_slave=$1local new_active_slave=$(ip -n ${ns} -d -j link show bond0 | \jq -r ".[].linkinfo.info_data.active_slave")shell check is not super happy about the lack of double quotes around the variables (above and many places below) and about declaring the variable and assigning it to a subshell in the same statement.
I think it's better to address such warnings for consistency.
Ah, this is a patch I wrote some times ago. I forgot to re-format it with shellcheck. I will fix the warnings.
Thanks hangbin
linux-kselftest-mirror@lists.linaro.org
-
Hangbin Liu -
Paolo Abeni