Changes v3: - Reworked patch 2. - Changed minor things in patch 1 like function name and made corrections to the patch message.
Changes v2: - Removed patches 2 and 3 since now this part will be supported by the kernel.
Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory into multiple NUMA nodes. When enabled, NUMA-aware applications can achieve better performance on bigger server platforms.
SNC support in the kernel is currently in review [1]. With SNC enabled and kernel support in place all the tests will function normally (aside from effective cache size). There might be a problem when SNC is enabled but the system is still using an older kernel version without SNC support. Currently the only message displayed in that situation is a guess that SNC might be enabled and is causing issues. That message also is displayed whenever the test fails on an Intel platform.
Add a mechanism to discover kernel support for SNC which will add more meaning and certainty to the error message.
Add runtime SNC mode detection and verify how reliable that information is.
Series was tested on Ice Lake server platforms with SNC disabled, SNC-2 and SNC-4. The tests were also ran with and without kernel support for SNC.
Series applies cleanly on kselftest/next.
[1] https://lore.kernel.org/all/20240628215619.76401-1-tony.luck@intel.com/
Previous versions of this series: [v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@intel... [v2] https://lore.kernel.org/all/cover.1715769576.git.maciej.wieczor-retman@intel...
Maciej Wieczor-Retman (2): selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/resctrl: Adjust SNC support messages
tools/testing/selftests/resctrl/cache.c | 3 + tools/testing/selftests/resctrl/cmt_test.c | 4 +- tools/testing/selftests/resctrl/mba_test.c | 4 + tools/testing/selftests/resctrl/mbm_test.c | 6 +- tools/testing/selftests/resctrl/resctrl.h | 8 + .../testing/selftests/resctrl/resctrl_tests.c | 7 + tools/testing/selftests/resctrl/resctrlfs.c | 138 ++++++++++++++++++ 7 files changed, 166 insertions(+), 4 deletions(-)
Sub-NUMA Cluster divides CPUs sharing an L3 cache into separate NUMA nodes. Systems may support splitting into either two, three or four nodes.
When SNC mode is enabled the effective amount of L3 cache available for allocation is divided by the number of nodes per L3.
Detect which SNC mode is active by comparing the number of CPUs that share a cache with CPU0, with the number of CPUs on node0.
Signed-off-by: Tony Luck tony.luck@intel.com Co-developed-by: Maciej Wieczor-Retman maciej.wieczor-retman@intel.com Signed-off-by: Maciej Wieczor-Retman maciej.wieczor-retman@intel.com --- Changelog v3: - Added comment to cache size modification to better explain why it is needed there. (Reinette) - Fix facts in patch message. (Reinette) - Change snc_ways() to snc_nodes_per_l3_cache(). (Reinette)
tools/testing/selftests/resctrl/resctrl.h | 4 ++ tools/testing/selftests/resctrl/resctrlfs.c | 70 +++++++++++++++++++++ 2 files changed, 74 insertions(+)
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h index 2dda56084588..851b37c9c38a 100644 --- a/tools/testing/selftests/resctrl/resctrl.h +++ b/tools/testing/selftests/resctrl/resctrl.h @@ -11,6 +11,7 @@ #include <signal.h> #include <dirent.h> #include <stdbool.h> +#include <ctype.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mount.h> @@ -43,6 +44,8 @@
#define DEFAULT_SPAN (250 * MB)
+#define MAX_SNC 4 + /* * user_params: User supplied parameters * @cpu: CPU number to which the benchmark will be bound to @@ -120,6 +123,7 @@ extern volatile int *value_sink;
extern char llc_occup_path[1024];
+int snc_nodes_per_l3_cache(void); int get_vendor(void); bool check_resctrlfs_support(void); int filter_dmesg(void); diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 250c320349a7..18a31a2ba7b3 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -156,6 +156,65 @@ int get_domain_id(const char *resource, int cpu_no, int *domain_id) return 0; }
+/* + * Count number of CPUs in a /sys bit map + */ +static unsigned int count_sys_bitmap_bits(char *name) +{ + FILE *fp = fopen(name, "r"); + int count = 0, c; + + if (!fp) + return 0; + + while ((c = fgetc(fp)) != EOF) { + if (!isxdigit(c)) + continue; + switch (c) { + case 'f': + count++; + case '7': case 'b': case 'd': case 'e': + count++; + case '3': case '5': case '6': case '9': case 'a': case 'c': + count++; + case '1': case '2': case '4': case '8': + count++; + } + } + fclose(fp); + + return count; +} + +/* + * Detect SNC by comparing #CPUs in node0 with #CPUs sharing LLC with CPU0. + * If some CPUs are offline the numbers may not be exact multiples of each + * other. Any offline CPUs on node0 will be also gone from shared_cpu_map of + * CPU0 but offline CPUs from other nodes will only make the cache_cpus value + * lower. Still try to get the ratio right by preventing the second possibility. + */ +int snc_nodes_per_l3_cache(void) +{ + int node_cpus, cache_cpus, i, ret = 1; + + node_cpus = count_sys_bitmap_bits("/sys/devices/system/node/node0/cpumap"); + cache_cpus = count_sys_bitmap_bits("/sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_map"); + + if (!node_cpus || !cache_cpus) { + ksft_print_msg("Could not determine Sub-NUMA Cluster mode!\n"); + return 1; + } + + for (i = 1; i <= MAX_SNC ; i++) { + if (i * node_cpus >= cache_cpus) { + ret = i; + break; + } + } + + return ret; +} + /* * get_cache_size - Get cache size for a specified CPU * @cpu_no: CPU number @@ -211,6 +270,17 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size break; }
+ /* + * The amount of cache represented by each bit in the masks + * in the schemata file is reduced by a factor equal to SNC + * nodes per L3 cache. + * E.g. on a SNC-2 system with a 100MB L3 cache a test that + * allocates memory from its local SNC node (default behavior + * without using libnuma) will only see 50 MB llc_occupancy + * with a fully populated L3 mask in the schemata file. + */ + if (cache_num == 3) + *cache_size /= snc_nodes_per_l3_cache(); return 0; }
Hi Maciej,
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote: ...
+int snc_nodes_per_l3_cache(void) +{
- int node_cpus, cache_cpus, i, ret = 1;
- node_cpus = count_sys_bitmap_bits("/sys/devices/system/node/node0/cpumap");
- cache_cpus = count_sys_bitmap_bits("/sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_map");
- if (!node_cpus || !cache_cpus) {
ksft_print_msg("Could not determine Sub-NUMA Cluster mode!\n");
nit: could you please check this series and remove exclamation marks from the messages printed to user space? Just stating the error should be sufficient.
Reinette
On 2024-07-02 at 15:20:22 -0700, Reinette Chatre wrote:
Hi Maciej,
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote: ...
+int snc_nodes_per_l3_cache(void) +{
- int node_cpus, cache_cpus, i, ret = 1;
- node_cpus = count_sys_bitmap_bits("/sys/devices/system/node/node0/cpumap");
- cache_cpus = count_sys_bitmap_bits("/sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_map");
- if (!node_cpus || !cache_cpus) {
ksft_print_msg("Could not determine Sub-NUMA Cluster mode!\n");nit: could you please check this series and remove exclamation marks from the messages printed to user space? Just stating the error should be sufficient.
Sure, will do.
Reinette
Resctrl selftest prints a message on test failure that Sub-Numa Clustering (SNC) could be enabled and points the user to check theirs BIOS settings. No actual check is performed before printing that message so it is not very accurate in pinpointing a problem.
Figuring out if SNC is enabled is only one part of the problem, the others being whether the detected SNC mode is reliable and whether the kernel supports SNC in resctrl.
When there is SNC support for kernel's resctrl subsystem and SNC is enabled then sub node files are created for each node in the resctrlfs. The sub node files exist in each regular node's L3 monitoring directory. The reliable path to check for existence of sub node files is /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_00.
To check if SNC detection is reliable one can check the /sys/devices/system/cpu/offline file. If it's empty, it means all cores are operational and the ratio should be calculated correctly. If it has any contents, it means the detected SNC mode can't be trusted and should be disabled.
Add helpers for detecting SNC mode and checking its reliability.
Detect SNC mode once and let other tests inherit that information.
Add messages to alert the user when SNC detection could return incorrect results.
Signed-off-by: Maciej Wieczor-Retman maciej.wieczor-retman@intel.com --- Changelog v3: - Change snc_ways() to snc_nodes_per_l3_cache(). (Reinette) - Add printing the discovered SNC mode. (Reinette) - Change method of kernel support discovery from cache sizes to existance of sub node files. - Check if SNC detection is unreliable. - Move SNC detection to only the first run_single_test() instead on error at the end of test runs. - Add global value to remind user at the end of relevant tests if SNC detection was found to be unreliable. - Redo the patch message after the changes.
Changelog v2: - Move snc_ways() checks from individual tests into snc_kernel_support(). - Write better comment for snc_kernel_support().
tools/testing/selftests/resctrl/cache.c | 3 + tools/testing/selftests/resctrl/cmt_test.c | 4 +- tools/testing/selftests/resctrl/mba_test.c | 4 ++ tools/testing/selftests/resctrl/mbm_test.c | 6 +- tools/testing/selftests/resctrl/resctrl.h | 4 ++ .../testing/selftests/resctrl/resctrl_tests.c | 7 ++ tools/testing/selftests/resctrl/resctrlfs.c | 70 ++++++++++++++++++- 7 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c index 1ff1104e6575..9885d64b8a21 100644 --- a/tools/testing/selftests/resctrl/cache.c +++ b/tools/testing/selftests/resctrl/cache.c @@ -186,4 +186,7 @@ void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", cache_span); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n"); + } diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c index 0c045080d808..588543ae2654 100644 --- a/tools/testing/selftests/resctrl/cmt_test.c +++ b/tools/testing/selftests/resctrl/cmt_test.c @@ -175,8 +175,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param goto out;
ret = check_results(¶m, span, n); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n"); + if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
out: free(span_str); diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c index ab8496a4925b..c91e85f11285 100644 --- a/tools/testing/selftests/resctrl/mba_test.c +++ b/tools/testing/selftests/resctrl/mba_test.c @@ -108,6 +108,8 @@ static bool show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc) ksft_print_msg("avg_diff_per: %d%%\n", avg_diff_per); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n"); if (avg_diff_per > MAX_DIFF_PERCENT) ret = true; } @@ -179,6 +181,8 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param return ret;
ret = check_results(); + if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
return ret; } diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c index 6b5a3b52d861..562b02118270 100644 --- a/tools/testing/selftests/resctrl/mbm_test.c +++ b/tools/testing/selftests/resctrl/mbm_test.c @@ -43,6 +43,8 @@ show_bw_info(unsigned long *bw_imc, unsigned long *bw_resc, size_t span) ksft_print_msg("Span (MB): %zu\n", span / MB); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
return ret; } @@ -147,8 +149,8 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param return ret;
ret = check_results(DEFAULT_SPAN); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel MBM may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n"); + if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
return ret; } diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h index 851b37c9c38a..fa44e1cde21b 100644 --- a/tools/testing/selftests/resctrl/resctrl.h +++ b/tools/testing/selftests/resctrl/resctrl.h @@ -121,10 +121,13 @@ struct perf_event_read { */ extern volatile int *value_sink;
+extern int snc_unreliable; + extern char llc_occup_path[1024];
int snc_nodes_per_l3_cache(void); int get_vendor(void); +int get_snc_mode(void); bool check_resctrlfs_support(void); int filter_dmesg(void); int get_domain_id(const char *resource, int cpu_no, int *domain_id); @@ -167,6 +170,7 @@ void ctrlc_handler(int signum, siginfo_t *info, void *ptr); int signal_handler_register(const struct resctrl_test *test); void signal_handler_unregister(void); unsigned int count_bits(unsigned long n); +int snc_kernel_support(void);
void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config); void perf_event_initialize_read_format(struct perf_event_read *pe_read); diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c index ecbb7605a981..b17560bbaf5c 100644 --- a/tools/testing/selftests/resctrl/resctrl_tests.c +++ b/tools/testing/selftests/resctrl/resctrl_tests.c @@ -12,6 +12,7 @@
/* Volatile memory sink to prevent compiler optimizations */ static volatile int sink_target; +static int snc_mode; volatile int *value_sink = &sink_target;
static struct resctrl_test *resctrl_tests[] = { @@ -123,6 +124,12 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p if (test->disabled) return;
+ if (!snc_mode) { + snc_mode = get_snc_mode(); + if (snc_mode > 1) + ksft_print_msg("SNC-%d mode discovered!\n", snc_mode); + } + if (!test_vendor_specific_check(test)) { ksft_test_result_skip("Hardware does not support %s\n", test->name); return; diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 18a31a2ba7b3..004fb6649789 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -13,6 +13,8 @@
#include "resctrl.h"
+int snc_unreliable; + static int find_resctrl_mount(char *buffer) { FILE *mounts; @@ -280,7 +282,7 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size * with a fully populated L3 mask in the schemata file. */ if (cache_num == 3) - *cache_size /= snc_nodes_per_l3_cache(); + *cache_size /= get_snc_mode(); return 0; }
@@ -939,3 +941,69 @@ unsigned int count_bits(unsigned long n)
return count; } + +static bool cpus_offline_empty(void) +{ + char offline_cpus_str[64]; + FILE *fp; + + fp = fopen("/sys/devices/system/cpu/offline", "r"); + if (fscanf(fp, "%s", offline_cpus_str) < 0) { + if (!errno) { + fclose(fp); + return 1; + } + ksft_perror("Could not read offline CPUs file!"); + } + + fclose(fp); + + return 0; +} + +int get_snc_mode(void) +{ + static int snc_mode; + + if (!snc_mode) { + snc_mode = snc_nodes_per_l3_cache(); + if (!cpus_offline_empty()) { + ksft_print_msg("Runtime SNC detection unreliable due to offline CPUs!\n"); + ksft_print_msg("Setting SNC mode to disabled.\n"); + snc_mode = 1; + snc_unreliable = 1; + } + } + + return snc_mode; +} + +/** + * snc_kernel_support - Compare system reported cache size and resctrl + * reported cache size to get an idea if SNC is supported on the kernel side. + * + * Return: 0 if not supported, 1 if SNC is disabled or SNC is both enabled and + * supported, < 0 on failure. + */ +int snc_kernel_support(void) +{ + char node_path[PATH_MAX]; + struct stat statbuf; + int ret; + + ret = get_snc_mode(); + /* + * If SNC is disabled then its kernel support isn't important. If value + * is smaller than 1 an error happened. + */ + if (ret <= 1) + return ret; + + snprintf(node_path, sizeof(node_path), "%s/%s/%s", RESCTRL_PATH, "mon_data", + "mon_L3_00/mon_sub_L3_00"); + + if (!stat(node_path, &statbuf)) + return 1; + + return 0; +}
+static bool cpus_offline_empty(void) +{ + char offline_cpus_str[64]; + FILE *fp; + + fp = fopen("/sys/devices/system/cpu/offline", "r");
Check for fp == NULL before using it.
+ if (fscanf(fp, "%s", offline_cpus_str) < 0) {
fscanf() seems like a heavy hammer.
if (fgets(offline_cpus_str, sizeof(offline_cpus_str), fp) == NULL) { + if (!errno) {
Don't need an errno check (seems dubious mixing errno with stdio).
+ fclose(fp); + return 1;
return true;
+ } + ksft_perror("Could not read offline CPUs file!"); + } + + fclose(fp); + + return 0;
return false; +}
Hi Tony,
On 7/1/24 9:04 AM, Luck, Tony wrote:
+static bool cpus_offline_empty(void) +{
- char offline_cpus_str[64];
- FILE *fp;
- fp = fopen("/sys/devices/system/cpu/offline", "r");
Check for fp == NULL before using it.
- if (fscanf(fp, "%s", offline_cpus_str) < 0) {
fscanf() seems like a heavy hammer.
Do you perhaps have any recommendations that should be used instead of fscanf()? I checked with stat() but could not see a difference between file with a CPU and a file without. Other alternative is open()/read()/close()? Looks like when there are no offline CPUs then the file will only contain '\n' so it may be possible to read one byte from the file and confirm it is '\n' as a check for "cpus_offline_empty()".
Reinette
On Tue, Jul 02, 2024 at 02:26:25PM -0700, Reinette Chatre wrote:
Hi Tony,
On 7/1/24 9:04 AM, Luck, Tony wrote:
+static bool cpus_offline_empty(void) +{
- char offline_cpus_str[64];
- FILE *fp;
- fp = fopen("/sys/devices/system/cpu/offline", "r");
Check for fp == NULL before using it.
- if (fscanf(fp, "%s", offline_cpus_str) < 0) {
fscanf() seems like a heavy hammer.
Do you perhaps have any recommendations that should be used instead of fscanf()? I checked with stat() but could not see a difference between file with a CPU and a file without. Other alternative is open()/read()/close()? Looks like when there are no offline CPUs then the file will only contain '\n' so it may be possible to read one byte from the file and confirm it is '\n' as a check for "cpus_offline_empty()".
Sorry. I replied with Outlook and didn't quote things properly so my alternate suggestion didn't stand out. Here it is again:
if (fgets(offline_cpus_str, sizeof(offline_cpus_str), fp) == NULL) { fclose(fp); return true; }
But that was with the assumption that /sys/devices/system/cpu/offline would be empty. Not that it would conatain a single "\n" as you say above.
So fgets( ...) followed with "if (offline_cpus_str[0] == '\n') "?
-Tony
Hi Tony,
On 7/2/24 2:46 PM, Tony Luck wrote:
On Tue, Jul 02, 2024 at 02:26:25PM -0700, Reinette Chatre wrote:
Hi Tony,
On 7/1/24 9:04 AM, Luck, Tony wrote:
+static bool cpus_offline_empty(void) +{
- char offline_cpus_str[64];
- FILE *fp;
- fp = fopen("/sys/devices/system/cpu/offline", "r");
Check for fp == NULL before using it.
- if (fscanf(fp, "%s", offline_cpus_str) < 0) {
fscanf() seems like a heavy hammer.
Do you perhaps have any recommendations that should be used instead of fscanf()? I checked with stat() but could not see a difference between file with a CPU and a file without. Other alternative is open()/read()/close()? Looks like when there are no offline CPUs then the file will only contain '\n' so it may be possible to read one byte from the file and confirm it is '\n' as a check for "cpus_offline_empty()".
Sorry. I replied with Outlook and didn't quote things properly so my alternate suggestion didn't stand out. Here it is again:
if (fgets(offline_cpus_str, sizeof(offline_cpus_str), fp) == NULL) { fclose(fp); return true; }
Apologies, missed this.
But that was with the assumption that /sys/devices/system/cpu/offline would be empty. Not that it would conatain a single "\n" as you say above.
So fgets( ...) followed with "if (offline_cpus_str[0] == '\n') "?
How about simplifying it more to "if (fgetc(fp) == '\n')" ?
Reinette
On 2024-07-03 at 00:03:58 +0200, Luck, Tony wrote:
So fgets( ...) followed with "if (offline_cpus_str[0] == '\n') "?
How about simplifying it more to "if (fgetc(fp) == '\n')" ?
Reinette,
Even better.
-Tony
Thanks, I'll try using this instead of fscanf.
Thanks for the review,
On 2024-07-01 at 18:04:00 +0200, Luck, Tony wrote:
+static bool cpus_offline_empty(void) +{
- char offline_cpus_str[64];
- FILE *fp;
- fp = fopen("/sys/devices/system/cpu/offline", "r");
Check for fp == NULL before using it.
Thanks, will add it.
- if (fscanf(fp, "%s", offline_cpus_str) < 0) {
fscanf() seems like a heavy hammer.
if (fgets(offline_cpus_str, sizeof(offline_cpus_str), fp) == NULL) {
if (!errno) {Don't need an errno check (seems dubious mixing errno with stdio).
fscanf() returns "-1" when nothing was read as well as if there was an error. But when nothing was read the errno is "0" instead of some error code so I could differentiate the cases that way. The fgetc() you settled on shouldn't have this problem.
fclose(fp);return 1; return true;}ksft_perror("Could not read offline CPUs file!");}
fclose(fp);
return 0;
return false;
+}
Hi Maciej,
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote:
Resctrl selftest prints a message on test failure that Sub-Numa Clustering (SNC) could be enabled and points the user to check theirs BIOS
theirs BIOS -> their BIOS?
settings. No actual check is performed before printing that message so it is not very accurate in pinpointing a problem.
Figuring out if SNC is enabled is only one part of the problem, the others being whether the detected SNC mode is reliable and whether the kernel supports SNC in resctrl.
When there is SNC support for kernel's resctrl subsystem and SNC is enabled then sub node files are created for each node in the resctrlfs. The sub node files exist in each regular node's L3 monitoring directory. The reliable path to check for existence of sub node files is /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_00.
To check if SNC detection is reliable one can check the /sys/devices/system/cpu/offline file. If it's empty, it means all cores are operational and the ratio should be calculated correctly. If it has any contents, it means the detected SNC mode can't be trusted and should be disabled.
Add helpers for detecting SNC mode and checking its reliability.
Detect SNC mode once and let other tests inherit that information.
Add messages to alert the user when SNC detection could return incorrect results.
Signed-off-by: Maciej Wieczor-Retman maciej.wieczor-retman@intel.com
Changelog v3:
- Change snc_ways() to snc_nodes_per_l3_cache(). (Reinette)
- Add printing the discovered SNC mode. (Reinette)
- Change method of kernel support discovery from cache sizes to existance of sub node files.
- Check if SNC detection is unreliable.
- Move SNC detection to only the first run_single_test() instead on error at the end of test runs.
- Add global value to remind user at the end of relevant tests if SNC detection was found to be unreliable.
- Redo the patch message after the changes.
Changelog v2:
Move snc_ways() checks from individual tests into snc_kernel_support().
Write better comment for snc_kernel_support().
tools/testing/selftests/resctrl/cache.c | 3 + tools/testing/selftests/resctrl/cmt_test.c | 4 +- tools/testing/selftests/resctrl/mba_test.c | 4 ++ tools/testing/selftests/resctrl/mbm_test.c | 6 +- tools/testing/selftests/resctrl/resctrl.h | 4 ++ .../testing/selftests/resctrl/resctrl_tests.c | 7 ++ tools/testing/selftests/resctrl/resctrlfs.c | 70 ++++++++++++++++++- 7 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c index 1ff1104e6575..9885d64b8a21 100644 --- a/tools/testing/selftests/resctrl/cache.c +++ b/tools/testing/selftests/resctrl/cache.c @@ -186,4 +186,7 @@ void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", cache_span);
- if (snc_unreliable)
ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
The message abour SNC detection being unreliable is already printed at beginning of every test so I do not think it is necessary to print it again at this point.
- }
diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c index 0c045080d808..588543ae2654 100644 --- a/tools/testing/selftests/resctrl/cmt_test.c +++ b/tools/testing/selftests/resctrl/cmt_test.c @@ -175,8 +175,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param goto out; ret = check_results(¶m, span, n);
- if (ret && (get_vendor() == ARCH_INTEL))
ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
- if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");out: free(span_str); diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c index ab8496a4925b..c91e85f11285 100644 --- a/tools/testing/selftests/resctrl/mba_test.c +++ b/tools/testing/selftests/resctrl/mba_test.c @@ -108,6 +108,8 @@ static bool show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc) ksft_print_msg("avg_diff_per: %d%%\n", avg_diff_per); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc);
if (snc_unreliable)ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
(here I also think this is unnecessary)
if (avg_diff_per > MAX_DIFF_PERCENT) ret = true;} @@ -179,6 +181,8 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param return ret; ret = check_results();
- if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");return ret; } diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c index 6b5a3b52d861..562b02118270 100644 --- a/tools/testing/selftests/resctrl/mbm_test.c +++ b/tools/testing/selftests/resctrl/mbm_test.c @@ -43,6 +43,8 @@ show_bw_info(unsigned long *bw_imc, unsigned long *bw_resc, size_t span) ksft_print_msg("Span (MB): %zu\n", span / MB); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc);
- if (snc_unreliable)
ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");return ret; } @@ -147,8 +149,8 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param return ret; ret = check_results(DEFAULT_SPAN);
- if (ret && (get_vendor() == ARCH_INTEL))
ksft_print_msg("Intel MBM may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
- if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");return ret; } diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h index 851b37c9c38a..fa44e1cde21b 100644 --- a/tools/testing/selftests/resctrl/resctrl.h +++ b/tools/testing/selftests/resctrl/resctrl.h @@ -121,10 +121,13 @@ struct perf_event_read { */ extern volatile int *value_sink; +extern int snc_unreliable;
- extern char llc_occup_path[1024];
int snc_nodes_per_l3_cache(void); int get_vendor(void); +int get_snc_mode(void); bool check_resctrlfs_support(void); int filter_dmesg(void); int get_domain_id(const char *resource, int cpu_no, int *domain_id); @@ -167,6 +170,7 @@ void ctrlc_handler(int signum, siginfo_t *info, void *ptr); int signal_handler_register(const struct resctrl_test *test); void signal_handler_unregister(void); unsigned int count_bits(unsigned long n); +int snc_kernel_support(void); void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config); void perf_event_initialize_read_format(struct perf_event_read *pe_read); diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c index ecbb7605a981..b17560bbaf5c 100644 --- a/tools/testing/selftests/resctrl/resctrl_tests.c +++ b/tools/testing/selftests/resctrl/resctrl_tests.c @@ -12,6 +12,7 @@ /* Volatile memory sink to prevent compiler optimizations */ static volatile int sink_target; +static int snc_mode;
This global seems unnecessary (more later) and also potentially confusing since the get_snc_mode() has a function local static variable of same name.
volatile int *value_sink = &sink_target; static struct resctrl_test *resctrl_tests[] = { @@ -123,6 +124,12 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p if (test->disabled) return;
- if (!snc_mode) {
snc_mode = get_snc_mode();if (snc_mode > 1)
From what I can tell this is the only place the global is used and this can just be: if (get_snc_mode() > 1)
ksft_print_msg("SNC-%d mode discovered!\n", snc_mode);- }
- if (!test_vendor_specific_check(test)) { ksft_test_result_skip("Hardware does not support %s\n", test->name); return;
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 18a31a2ba7b3..004fb6649789 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -13,6 +13,8 @@ #include "resctrl.h" +int snc_unreliable;
- static int find_resctrl_mount(char *buffer) { FILE *mounts;
@@ -280,7 +282,7 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size * with a fully populated L3 mask in the schemata file. */ if (cache_num == 3)
*cache_size /= snc_nodes_per_l3_cache();
*cache_size /= get_snc_mode();
hmmm ... it is not ideal to use second patch to change something from first patch. Just having a single snc_nodes_per_l3_cache() will eliminate this change (more below).
return 0; } @@ -939,3 +941,69 @@ unsigned int count_bits(unsigned long n) return count; }
+static bool cpus_offline_empty(void) +{
- char offline_cpus_str[64];
- FILE *fp;
- fp = fopen("/sys/devices/system/cpu/offline", "r");
- if (fscanf(fp, "%s", offline_cpus_str) < 0) {
if (!errno) {fclose(fp);return 1;}ksft_perror("Could not read offline CPUs file!");- }
- fclose(fp);
- return 0;
+}
+int get_snc_mode(void) +{
- static int snc_mode;
- if (!snc_mode) {
snc_mode = snc_nodes_per_l3_cache();if (!cpus_offline_empty()) {ksft_print_msg("Runtime SNC detection unreliable due to offline CPUs!\n");ksft_print_msg("Setting SNC mode to disabled.\n");snc_mode = 1;snc_unreliable = 1;}- }
- return snc_mode;
+}
I think the SNC detection will be easier to understand if it is done in a single place. Can the static local variable and checks using the offline file instead be included in existing snc_nodes_per_l3_cache()?
+/**
- snc_kernel_support - Compare system reported cache size and resctrl
- reported cache size to get an idea if SNC is supported on the kernel side.
This comment does not seem to match what the function does.
- Return: 0 if not supported, 1 if SNC is disabled or SNC is both enabled and
- supported, < 0 on failure.
- */
+int snc_kernel_support(void) +{
- char node_path[PATH_MAX];
- struct stat statbuf;
- int ret;
- ret = get_snc_mode();
- /*
* If SNC is disabled then its kernel support isn't important. If value* is smaller than 1 an error happened.
How can a value smaller than 1 be returned?
*/- if (ret <= 1)
return ret;- snprintf(node_path, sizeof(node_path), "%s/%s/%s", RESCTRL_PATH, "mon_data",
"mon_L3_00/mon_sub_L3_00");- if (!stat(node_path, &statbuf))
return 1;- return 0;
+}
Reinette
Hi, and thanks for the review,
On 3.07.2024 00:21, Reinette Chatre wrote:
Hi Maciej,
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote:
Resctrl selftest prints a message on test failure that Sub-Numa Clustering (SNC) could be enabled and points the user to check theirs BIOS
theirs BIOS -> their BIOS?
Right, thanks.
settings. No actual check is performed before printing that message so it is not very accurate in pinpointing a problem.
Figuring out if SNC is enabled is only one part of the problem, the others being whether the detected SNC mode is reliable and whether the kernel supports SNC in resctrl.
When there is SNC support for kernel's resctrl subsystem and SNC is enabled then sub node files are created for each node in the resctrlfs. The sub node files exist in each regular node's L3 monitoring directory. The reliable path to check for existence of sub node files is /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_00.
To check if SNC detection is reliable one can check the /sys/devices/system/cpu/offline file. If it's empty, it means all cores are operational and the ratio should be calculated correctly. If it has any contents, it means the detected SNC mode can't be trusted and should be disabled.
Add helpers for detecting SNC mode and checking its reliability.
Detect SNC mode once and let other tests inherit that information.
Add messages to alert the user when SNC detection could return incorrect results.
Signed-off-by: Maciej Wieczor-Retman maciej.wieczor-retman@intel.com
Changelog v3:
- Change snc_ways() to snc_nodes_per_l3_cache(). (Reinette)
- Add printing the discovered SNC mode. (Reinette)
- Change method of kernel support discovery from cache sizes to
existance of sub node files.
- Check if SNC detection is unreliable.
- Move SNC detection to only the first run_single_test() instead on
error at the end of test runs.
- Add global value to remind user at the end of relevant tests if SNC
detection was found to be unreliable.
- Redo the patch message after the changes.
Changelog v2:
- Move snc_ways() checks from individual tests into
snc_kernel_support().
- Write better comment for snc_kernel_support().
tools/testing/selftests/resctrl/cache.c | 3 + tools/testing/selftests/resctrl/cmt_test.c | 4 +- tools/testing/selftests/resctrl/mba_test.c | 4 ++ tools/testing/selftests/resctrl/mbm_test.c | 6 +- tools/testing/selftests/resctrl/resctrl.h | 4 ++ .../testing/selftests/resctrl/resctrl_tests.c | 7 ++ tools/testing/selftests/resctrl/resctrlfs.c | 70 ++++++++++++++++++- 7 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c index 1ff1104e6575..9885d64b8a21 100644 --- a/tools/testing/selftests/resctrl/cache.c +++ b/tools/testing/selftests/resctrl/cache.c @@ -186,4 +186,7 @@ void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", cache_span); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
The message abour SNC detection being unreliable is already printed at beginning of every test so I do not think it is necessary to print it again at this point.
The "SNC detection was unreliable" only gets printed on the first execution of run_single_test(). That's what the global snc_mode was for mostly, it starts initialized to 0, and then on the first run of run_single_test() it is set so other tests don't call get_snc_mode(). And then the local static variable inside get_snc_mode() prevents the detection from running more than once when other places call get_snc_mode() (like when the cache size is adjusted).
And as we discussed last time it's beneficial to put error messages at the end of the test in case the user misses the initial warning at the very beginning.
} diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c index 0c045080d808..588543ae2654 100644 --- a/tools/testing/selftests/resctrl/cmt_test.c +++ b/tools/testing/selftests/resctrl/cmt_test.c @@ -175,8 +175,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param goto out; ret = check_results(¶m, span, n); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
I was going for this one error message to specifically catch the kernel not having snc support for resctrl while snc is enabled. While the above message could be true when snc_unreliable == 1, it doesn't have to. SNC might not be enabled at all so there would be no reason to send the user to check their BIOS - instead they can learn they have offline CPUs and they can work on fixing that. In my opinion it could be beneficial to have more specialized messages in the selftests to help users diagnose problems quicker.
Having only this one message wihtout the "if snc unreliable" messages would mean nothing would get printed at the end on success with unreliable SNC detection.
+ if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n"); out: free(span_str); diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c index ab8496a4925b..c91e85f11285 100644 --- a/tools/testing/selftests/resctrl/mba_test.c +++ b/tools/testing/selftests/resctrl/mba_test.c @@ -108,6 +108,8 @@ static bool show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc) ksft_print_msg("avg_diff_per: %d%%\n", avg_diff_per); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
(here I also think this is unnecessary)
Same as above.
if (avg_diff_per > MAX_DIFF_PERCENT) ret = true; } @@ -179,6 +181,8 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param return ret; ret = check_results(); + if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n"); return ret; } diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c index 6b5a3b52d861..562b02118270 100644 --- a/tools/testing/selftests/resctrl/mbm_test.c +++ b/tools/testing/selftests/resctrl/mbm_test.c @@ -43,6 +43,8 @@ show_bw_info(unsigned long *bw_imc, unsigned long *bw_resc, size_t span) ksft_print_msg("Span (MB): %zu\n", span / MB); ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc); ksft_print_msg("avg_bw_resc: %lu\n", avg_bw_resc); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n"); return ret; } @@ -147,8 +149,8 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param return ret; ret = check_results(DEFAULT_SPAN); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel MBM may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
Same as above.
+ if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) + ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n"); return ret; } diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h index 851b37c9c38a..fa44e1cde21b 100644 --- a/tools/testing/selftests/resctrl/resctrl.h +++ b/tools/testing/selftests/resctrl/resctrl.h @@ -121,10 +121,13 @@ struct perf_event_read { */ extern volatile int *value_sink; +extern int snc_unreliable;
extern char llc_occup_path[1024]; int snc_nodes_per_l3_cache(void); int get_vendor(void); +int get_snc_mode(void); bool check_resctrlfs_support(void); int filter_dmesg(void); int get_domain_id(const char *resource, int cpu_no, int *domain_id); @@ -167,6 +170,7 @@ void ctrlc_handler(int signum, siginfo_t *info, void *ptr); int signal_handler_register(const struct resctrl_test *test); void signal_handler_unregister(void); unsigned int count_bits(unsigned long n); +int snc_kernel_support(void); void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config); void perf_event_initialize_read_format(struct perf_event_read *pe_read); diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c index ecbb7605a981..b17560bbaf5c 100644 --- a/tools/testing/selftests/resctrl/resctrl_tests.c +++ b/tools/testing/selftests/resctrl/resctrl_tests.c @@ -12,6 +12,7 @@ /* Volatile memory sink to prevent compiler optimizations */ static volatile int sink_target; +static int snc_mode;
This global seems unnecessary (more later) and also potentially confusing since the get_snc_mode() has a function local static variable of same name.
volatile int *value_sink = &sink_target; static struct resctrl_test *resctrl_tests[] = { @@ -123,6 +124,12 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p if (test->disabled) return; + if (!snc_mode) { + snc_mode = get_snc_mode(); + if (snc_mode > 1)
From what I can tell this is the only place the global is used and this can just be: if (get_snc_mode() > 1)
I wanted to print the message below only on the first call to run_single_test() and then print relevant warnings at the very end of each test. I thought that was your intention when we discussed what messages are supposed to be printed and when in v2 of this series.
Do you think it would be better to just print this message at the start of each test?
Or should I make "snc_mode" into local static inside run_single_test()? Or maybe add a second local static variable into get_snc_mode() that would control whether or not the message should be printed?
+ ksft_print_msg("SNC-%d mode discovered!\n", snc_mode); + }
if (!test_vendor_specific_check(test)) { ksft_test_result_skip("Hardware does not support %s\n", test->name); return; diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 18a31a2ba7b3..004fb6649789 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -13,6 +13,8 @@ #include "resctrl.h" +int snc_unreliable;
static int find_resctrl_mount(char *buffer) { FILE *mounts; @@ -280,7 +282,7 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size * with a fully populated L3 mask in the schemata file. */ if (cache_num == 3) - *cache_size /= snc_nodes_per_l3_cache(); + *cache_size /= get_snc_mode();
hmmm ... it is not ideal to use second patch to change something from first patch. Just having a single snc_nodes_per_l3_cache() will eliminate this change (more below).
return 0; } @@ -939,3 +941,69 @@ unsigned int count_bits(unsigned long n) return count; }
+static bool cpus_offline_empty(void) +{ + char offline_cpus_str[64]; + FILE *fp;
+ fp = fopen("/sys/devices/system/cpu/offline", "r"); + if (fscanf(fp, "%s", offline_cpus_str) < 0) { + if (!errno) { + fclose(fp); + return 1; + } + ksft_perror("Could not read offline CPUs file!"); + }
+ fclose(fp);
+ return 0; +}
+int get_snc_mode(void) +{ + static int snc_mode;
+ if (!snc_mode) { + snc_mode = snc_nodes_per_l3_cache(); + if (!cpus_offline_empty()) { + ksft_print_msg("Runtime SNC detection unreliable due to offline CPUs!\n"); + ksft_print_msg("Setting SNC mode to disabled.\n"); + snc_mode = 1; + snc_unreliable = 1; + } + }
+ return snc_mode; +}
I think the SNC detection will be easier to understand if it is done in a single place. Can the static local variable and checks using the offline file instead be included in existing snc_nodes_per_l3_cache()?
Sure, that sounds good.
+/**
- snc_kernel_support - Compare system reported cache size and resctrl
- reported cache size to get an idea if SNC is supported on the kernel side.
This comment does not seem to match what the function does.
Oops, sorry, will fix it.
- Return: 0 if not supported, 1 if SNC is disabled or SNC is both enabled and
- supported, < 0 on failure.
- */
+int snc_kernel_support(void) +{ + char node_path[PATH_MAX]; + struct stat statbuf; + int ret;
+ ret = get_snc_mode(); + /* + * If SNC is disabled then its kernel support isn't important. If value + * is smaller than 1 an error happened.
How can a value smaller than 1 be returned?
I think I left it here by accident because I was experimenting with other ways of detecting the snc mode and then it could return errors. Will remove it.
+ */ + if (ret <= 1) + return ret;
+ snprintf(node_path, sizeof(node_path), "%s/%s/%s", RESCTRL_PATH, "mon_data", + "mon_L3_00/mon_sub_L3_00");
+ if (!stat(node_path, &statbuf)) + return 1;
+ return 0; +}
Reinette
-- Kind regards Maciej Wieczór-Retman
Hi Maciej,
On 7/3/24 12:43 AM, Maciej Wieczór-Retman wrote:
On 3.07.2024 00:21, Reinette Chatre wrote:
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote:
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c index 1ff1104e6575..9885d64b8a21 100644 --- a/tools/testing/selftests/resctrl/cache.c +++ b/tools/testing/selftests/resctrl/cache.c @@ -186,4 +186,7 @@ void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", cache_span); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
The message abour SNC detection being unreliable is already printed at beginning of every test so I do not think it is necessary to print it again at this point.
The "SNC detection was unreliable" only gets printed on the first execution of run_single_test().
There is more about this later, but this can be printed at start of each test.
That's what the global snc_mode was for mostly, it starts initialized to 0, and then on the first run of run_single_test() it is set so other tests don't call get_snc_mode(). And then the local static variable inside get_snc_mode() prevents the detection from running more than once when other places call get_snc_mode() (like when the cache size is adjusted).
The shadowing of variables can get confusing. I think the global snc_mode is not necessary, having the local static variable within snc_nodes_per_l3_cache() should be sufficient and run_single_test() can just do a:
int snc_mode; /* new name welcome */
snc_mode = snc_nodes_per_l3_cache(); if (snc_mode > 1) ksft_print_msg("SNC-%d mode discovered\n", snc_mode); else if (snc_unreliable) ksft_print_msg("SNC detection unreliable due to offline CPUs. Test results may not be accurate if SNC enabled.\n");
And as we discussed last time it's beneficial to put error messages at the end of the test in case the user misses the initial warning at the very beginning.
Right. What I found unexpected was that it is done "at the end" but from two places, from the show*info() as well as from run*test(). I expect "the end" to be a single place.
} diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c index 0c045080d808..588543ae2654 100644 --- a/tools/testing/selftests/resctrl/cmt_test.c +++ b/tools/testing/selftests/resctrl/cmt_test.c @@ -175,8 +175,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param goto out; ret = check_results(¶m, span, n); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
I was going for this one error message to specifically catch the kernel not having snc support for resctrl while snc is enabled. While the above message could be true when snc_unreliable == 1, it doesn't have to.
If a test fails when snc_unreliable == 1 then nothing is certain and some generic message is needed.
SNC might not be enabled at all so there would be no reason to send the user to check their BIOS - instead they can learn they have offline CPUs and they can work on fixing that. In my opinion it could be beneficial to have more specialized messages in the selftests to help users diagnose problems quicker.
My goal is indeed to have specialized messages. There cannot be a specialized message if snc_reliable == 1. In this case it needs to be generic since SNC may or may not be enabled and it is up to the user to investigate further.
Having only this one message wihtout the "if snc unreliable" messages would mean nothing would get printed at the end on success with unreliable SNC detection.
Having a pass/fail is what user will focus on. If the test passes then SNC detection should not matter. The messages are just there to help user root cause where a failure may be.
...
volatile int *value_sink = &sink_target; static struct resctrl_test *resctrl_tests[] = { @@ -123,6 +124,12 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p if (test->disabled) return; + if (!snc_mode) { + snc_mode = get_snc_mode(); + if (snc_mode > 1)
From what I can tell this is the only place the global is used and this can just be: if (get_snc_mode() > 1)
I wanted to print the message below only on the first call to run_single_test() and then print relevant warnings at the very end of each test. I thought that was your intention when we discussed what messages are supposed to be printed and when in v2 of this series.
Do you think it would be better to just print this message at the start of each test?
Yes. If there is a problem with a test the user could be expected to start tracing back messages printed from beginning of failing test.
Or should I make "snc_mode" into local static inside run_single_test()? Or maybe add a second local static variable into get_snc_mode() that would control whether or not the message should be printed?
I do not see where more local static variables may be needed.
Reinette
Hi Reinette,
On 2024-07-03 at 13:51:03 -0700, Reinette Chatre wrote:
Hi Maciej,
On 7/3/24 12:43 AM, Maciej Wieczór-Retman wrote:
On 3.07.2024 00:21, Reinette Chatre wrote:
On 7/1/24 7:18 AM, Maciej Wieczor-Retman wrote:
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c index 1ff1104e6575..9885d64b8a21 100644 --- a/tools/testing/selftests/resctrl/cache.c +++ b/tools/testing/selftests/resctrl/cache.c @@ -186,4 +186,7 @@ void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", cache_span); + if (snc_unreliable) + ksft_print_msg("SNC detection unreliable due to offline CPUs!\n");
The message abour SNC detection being unreliable is already printed at beginning of every test so I do not think it is necessary to print it again at this point.
The "SNC detection was unreliable" only gets printed on the first execution of run_single_test().
There is more about this later, but this can be printed at start of each test.
Okay, thanks.
That's what the global snc_mode was for mostly, it starts initialized to 0, and then on the first run of run_single_test() it is set so other tests don't call get_snc_mode(). And then the local static variable inside get_snc_mode() prevents the detection from running more than once when other places call get_snc_mode() (like when the cache size is adjusted).
The shadowing of variables can get confusing. I think the global snc_mode is not necessary, having the local static variable within snc_nodes_per_l3_cache() should be sufficient and run_single_test() can just do a:
int snc_mode; /* new name welcome */
snc_mode = snc_nodes_per_l3_cache(); if (snc_mode > 1) ksft_print_msg("SNC-%d mode discovered\n", snc_mode); else if (snc_unreliable) ksft_print_msg("SNC detection unreliable due to offline CPUs. Test results may not be accurate if SNC enabled.\n");
This sounds good, thanks.
And as we discussed last time it's beneficial to put error messages at the end of the test in case the user misses the initial warning at the very beginning.
Right. What I found unexpected was that it is done "at the end" but from two places, from the show*info() as well as from run*test(). I expect "the end" to be a single place.
Okay, I'll remove messages from show*info().
} diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c index 0c045080d808..588543ae2654 100644 --- a/tools/testing/selftests/resctrl/cmt_test.c +++ b/tools/testing/selftests/resctrl/cmt_test.c @@ -175,8 +175,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param goto out; ret = check_results(¶m, span, n); - if (ret && (get_vendor() == ARCH_INTEL)) - ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
This message does seem to still be applicable if snc_unreliable == 1.
I was going for this one error message to specifically catch the kernel not having snc support for resctrl while snc is enabled. While the above message could be true when snc_unreliable == 1, it doesn't have to.
If a test fails when snc_unreliable == 1 then nothing is certain and some generic message is needed.
Right
SNC might not be enabled at all so there would be no reason to send the user to check their BIOS - instead they can learn they have offline CPUs and they can work on fixing that. In my opinion it could be beneficial to have more specialized messages in the selftests to help users diagnose problems quicker.
My goal is indeed to have specialized messages. There cannot be a specialized message if snc_reliable == 1. In this case it needs to be generic since SNC may or may not be enabled and it is up to the user to investigate further.
How about this in cmt_run_test() for example:
if (snc_unreliable) ksft_print_msg("Intel CMT may be inaccurate or inefficient when Sub-NUMA Clustering is enabled and not properly detected.\n"); else if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support()) ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
This way there is a generic message when snc_unreliable == 1.
And as you mentioned at the end of this email, the user can be expected to backtrack to the beginning of the test if there are any problems so they can discover the exact source of the issue - offline cpus.
Having only this one message wihtout the "if snc unreliable" messages would mean nothing would get printed at the end on success with unreliable SNC detection.
Having a pass/fail is what user will focus on. If the test passes then SNC detection should not matter. The messages are just there to help user root cause where a failure may be.
My train of thought was that if test passes with broken SNC detection it means SNC was used inefficiently right? (either the portion of L3 used was bigger or smaller than that allocated for one cluster)
It's not exactly a failure but I thought it deserves a warning at the very end to alert the user.
If you don't think the warning should be printed on success I guess the condition can be: if (ret && snc_unreliable) and the user can look at the start of the test if they care about more information. And the message can lose the "inefficient" word since it would only happen on error.
...
volatile int *value_sink = &sink_target; static struct resctrl_test *resctrl_tests[] = { @@ -123,6 +124,12 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p if (test->disabled) return; + if (!snc_mode) { + snc_mode = get_snc_mode(); + if (snc_mode > 1)
From what I can tell this is the only place the global is used and this can just be: if (get_snc_mode() > 1)
I wanted to print the message below only on the first call to run_single_test() and then print relevant warnings at the very end of each test. I thought that was your intention when we discussed what messages are supposed to be printed and when in v2 of this series.
Do you think it would be better to just print this message at the start of each test?
Yes. If there is a problem with a test the user could be expected to start tracing back messages printed from beginning of failing test.
I tried to reply to this comment with the suggestion above.
Or should I make "snc_mode" into local static inside run_single_test()? Or maybe add a second local static variable into get_snc_mode() that would control whether or not the message should be printed?
I do not see where more local static variables may be needed.
Since you agreed with the previous paragraph this one doesn't matter.
Reinette
linux-kselftest-mirror@lists.linaro.org
-
Luck, Tony -
Maciej Wieczor-Retman -
Maciej Wieczór-Retman
-
Reinette Chatre -
Tony Luck