BPF test case test_kmod.sh hangs on all devices running linux next.
+ cd /opt/kselftests/default-in-kernel/bpf + ./test_kmod.sh sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory [ JIT enabled:0 hardened:0 ]
https://lkft.validation.linaro.org/scheduler/job/429726
Test hangs started from 4.19.0-rc4-next-20180918. Linux version 4.19.0-rc4-next-20180918 (oe-user@oe-host) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Sep 18 05:26:00 UTC 2018
History can be compared from this page. https://qa-reports.linaro.org/lkft/linux-next-oe/tests/kselftest/bpf_test_km...
OTOH, There is a kernel BUG,
[ 41.003698] BUG: unable to handle kernel paging request at 0000000000001460 [ 41.016603] PGD 800000045d648067 P4D 800000045d648067 PUD 4575c8067 PMD 0 [ 41.023475] Oops: 0000 [#1] SMP PTI [ 41.026959] CPU: 3 PID: 2790 Comm: modprobe Not tainted 4.19.0-rc4-next-20180920 #1 [ 41.034621] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 41.042094] RIP: 0010:__skb_flow_dissect+0xd9/0x1740 [ 41.047057] Code: 7b 79 ff 85 c0 41 5a 74 0d 80 3d 06 cd 00 01 00 0f 84 4f 05 00 00 4d 85 ff 0f 84 4a 02 00 00 49 8b 47 10 48 8b 80 40 05 00 00 <4c> 8b 80 60 14 00 00 4c 89 85 28 ff ff ff e8 54 7b 79 ff 85 c0 4c [ 41.065795] RSP: 0018:ffff9accc1cf79c0 EFLAGS: 00010286 [ 41.071019] RAX: 0000000000000000 RBX: 000000000000000e RCX: 000000002c29b266 [ 41.078143] RDX: 0000000097969774 RSI: 0000000000000000 RDI: 0000000000000001 [ 41.085268] RBP: ffff9accc1cf7ac0 R08: ffffffff9b7517e9 R09: 0000000000000002 [ 41.092392] R10: ffffffff9b7517e9 R11: ffffffff9c662080 R12: ffffffff9c78b620 [ 41.099517] R13: 0000000000000008 R14: ffff9accc1cf7aec R15: ffff882f575e6800 [ 41.106640] FS: 00007fcb533fe740(0000) GS:ffff882f5fb80000(0000) knlGS:0000000000000000 [ 41.114716] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.120454] CR2: 0000000000001460 CR3: 000000045b606002 CR4: 00000000003606e0 [ 41.127590] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.134737] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.141860] Call Trace: [ 41.144305] ? find_held_lock+0x35/0xa0 [ 41.148136] ? __lock_acquire+0x2b5/0x1340 [ 41.152227] ? find_held_lock+0x35/0xa0 [ 41.156057] skb_get_poff+0x4b/0x90 [ 41.159542] ? skb_get_poff+0x4b/0x90 [ 41.163207] bpf_skb_get_pay_offset+0xe/0x20 [ 41.167471] ___bpf_prog_run+0x45f/0x10d0 [ 41.171475] __bpf_prog_run32+0x39/0x50 [ 41.175305] ? lockdep_hardirqs_on+0xef/0x180 [ 41.179656] ? ktime_get+0x6b/0x110 [ 41.183143] test_bpf_init+0x5ab/0x1000 [test_bpf] [ 41.187933] ? 0xffffffffc02e2000 [ 41.191244] do_one_initcall+0x5f/0x2b7 [ 41.195074] ? rcu_read_lock_sched_held+0x81/0x90 [ 41.199770] ? kmem_cache_alloc_trace+0x1de/0x210 [ 41.204469] ? do_init_module+0x27/0x212 [ 41.208387] do_init_module+0x5f/0x212 [ 41.212138] load_module+0x20f5/0x2640 [ 41.215886] __do_sys_finit_module+0xd1/0xf0 [ 41.220156] ? __do_sys_finit_module+0xd1/0xf0 [ 41.224626] __x64_sys_finit_module+0x1a/0x20 [ 41.228984] do_syscall_64+0x4f/0x190 [ 41.232645] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 41.237697] RIP: 0033:0x7fcb52d087f9 [ 41.241266] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f e6 2b 00 f7 d8 64 89 01 48 [ 41.260004] RSP: 002b:00007ffe780dd828 EFLAGS: 00000206 ORIG_RAX: 0000000000000139 [ 41.267589] RAX: ffffffffffffffda RBX: 00000000006aba70 RCX: 00007fcb52d087f9 [ 41.274737] RDX: 0000000000000000 RSI: 0000000000418424 RDI: 0000000000000003 [ 41.281861] RBP: 0000000000418424 R08: 0000000000000000 R09: 0000000000000000 [ 41.288985] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000000000 [ 41.296108] R13: 0000000000040000 R14: 0000000000000000 R15: 0000000000000000 [ 41.303234] Modules linked in: test_bpf(+) x86_pkg_temp_thermal fuse [ 41.309590] CR2: 0000000000001460 [ 41.312930] ---[ end trace a7d5229a26c41aad ]--- [ 41.317541] RIP: 0010:__skb_flow_dissect+0xd9/0x1740 [ 41.322497] Code: 7b 79 ff 85 c0 41 5a 74 0d 80 3d 06 cd 00 01 00 0f 84 4f 05 00 00 4d 85 ff 0f 84 4a 02 00 00 49 8b 47 10 48 8b 80 40 05 00 00 <4c> 8b 80 60 14 00 00 4c 89 85 28 ff ff ff e8 54 7b 79 ff 85 c0 4c [ 41.341235] RSP: 0018:ffff9accc1cf79c0 EFLAGS: 00010286 [ 41.346452] RAX: 0000000000000000 RBX: 000000000000000e RCX: 000000002c29b266 [ 41.353588] RDX: 0000000097969774 RSI: 0000000000000000 RDI: 0000000000000001 [ 41.360716] RBP: ffff9accc1cf7ac0 R08: ffffffff9b7517e9 R09: 0000000000000002 [ 41.367841] R10: ffffffff9b7517e9 R11: ffffffff9c662080 R12: ffffffff9c78b620 [ 41.374964] R13: 0000000000000008 R14: ffff9accc1cf7aec R15: ffff882f575e6800 [ 41.382089] FS: 00007fcb533fe740(0000) GS:ffff882f5fb80000(0000) knlGS:0000000000000000 [ 41.390165] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.395903] CR2: 0000000000001460 CR3: 000000045b606002 CR4: 00000000003606e0 [ 41.403026] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.410153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.417275] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/include/linux/percpu-rwsem.h:34 [ 41.432199] in_atomic(): 1, irqs_disabled(): 1, pid: 2790, name: modprobe [ 41.438977] INFO: lockdep is turned off. [ 41.442893] irq event stamp: 13766 [ 41.446292] hardirqs last enabled at (13765): [<ffffffff9af037eb>] ktime_get+0x6b/0x110 [ 41.454369] hardirqs last disabled at (13766): [<ffffffff9ae01c6b>] trace_hardirqs_off_thunk+0x1a/0x1c [ 41.463658] softirqs last enabled at (13728): [<ffffffff9be0032d>] __do_softirq+0x32d/0x42f [ 41.472084] softirqs last disabled at (13711): [<ffffffff9ae70679>] irq_exit+0xc9/0xd0 [ 41.479996] CPU: 3 PID: 2790 Comm: modprobe Tainted: G D 4.19.0-rc4-next-20180920 #1 [ 41.489026] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 41.496496] Call Trace: [ 41.498943] dump_stack+0x70/0xa5 [ 41.502261] ___might_sleep+0x152/0x240 [ 41.506091] __might_sleep+0x4a/0x80 [ 41.509679] exit_signals+0x33/0x240 [ 41.513249] do_exit+0xb1/0xc60 [ 41.516387] rewind_stack_do_exit+0x17/0x20 [ 41.520587] RIP: 0033:0x7fcb52d087f9 [ 41.524177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f e6 2b 00 f7 d8 64 89 01 48 [ 41.542914] RSP: 002b:00007ffe780dd828 EFLAGS: 00000206 ORIG_RAX: 0000000000000139 [ 41.550471] RAX: ffffffffffffffda RBX: 00000000006aba70 RCX: 00007fcb52d087f9 [ 41.557608] RDX: 0000000000000000 RSI: 0000000000418424 RDI: 0000000000000003 [ 41.564735] RBP: 0000000000418424 R08: 0000000000000000 R09: 0000000000000000 [ 41.571860] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000000000 [ 41.578985] R13: 0000000000040000 R14: 0000000000000000 R15: 0000000000000000 e)
Bug reported, https://bugs.linaro.org/show_bug.cgi?id=4006
On 10/08/2018 03:13 PM, Naresh Kamboju wrote:
BPF test case test_kmod.sh hangs on all devices running linux next.
- cd /opt/kselftests/default-in-kernel/bpf
- ./test_kmod.sh
sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory [ JIT enabled:0 hardened:0 ]
https://lkft.validation.linaro.org/scheduler/job/429726
Test hangs started from 4.19.0-rc4-next-20180918. Linux version 4.19.0-rc4-next-20180918 (oe-user@oe-host) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Sep 18 05:26:00 UTC 2018
History can be compared from this page. https://qa-reports.linaro.org/lkft/linux-next-oe/tests/kselftest/bpf_test_km...
OTOH, There is a kernel BUG,
This is quite an old linux-next kernel, should be fixed by 100811936f89 ("bpf: test_bpf: add init_net to dev for flow_dissector"). Please make sure you have that commit included in your testing:
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=...
Thanks, Daniel
[ 41.003698] BUG: unable to handle kernel paging request at 0000000000001460 [ 41.016603] PGD 800000045d648067 P4D 800000045d648067 PUD 4575c8067 PMD 0 [ 41.023475] Oops: 0000 [#1] SMP PTI [ 41.026959] CPU: 3 PID: 2790 Comm: modprobe Not tainted 4.19.0-rc4-next-20180920 #1 [ 41.034621] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 41.042094] RIP: 0010:__skb_flow_dissect+0xd9/0x1740 [ 41.047057] Code: 7b 79 ff 85 c0 41 5a 74 0d 80 3d 06 cd 00 01 00 0f 84 4f 05 00 00 4d 85 ff 0f 84 4a 02 00 00 49 8b 47 10 48 8b 80 40 05 00 00 <4c> 8b 80 60 14 00 00 4c 89 85 28 ff ff ff e8 54 7b 79 ff 85 c0 4c [ 41.065795] RSP: 0018:ffff9accc1cf79c0 EFLAGS: 00010286 [ 41.071019] RAX: 0000000000000000 RBX: 000000000000000e RCX: 000000002c29b266 [ 41.078143] RDX: 0000000097969774 RSI: 0000000000000000 RDI: 0000000000000001 [ 41.085268] RBP: ffff9accc1cf7ac0 R08: ffffffff9b7517e9 R09: 0000000000000002 [ 41.092392] R10: ffffffff9b7517e9 R11: ffffffff9c662080 R12: ffffffff9c78b620 [ 41.099517] R13: 0000000000000008 R14: ffff9accc1cf7aec R15: ffff882f575e6800 [ 41.106640] FS: 00007fcb533fe740(0000) GS:ffff882f5fb80000(0000) knlGS:0000000000000000 [ 41.114716] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.120454] CR2: 0000000000001460 CR3: 000000045b606002 CR4: 00000000003606e0 [ 41.127590] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.134737] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.141860] Call Trace: [ 41.144305] ? find_held_lock+0x35/0xa0 [ 41.148136] ? __lock_acquire+0x2b5/0x1340 [ 41.152227] ? find_held_lock+0x35/0xa0 [ 41.156057] skb_get_poff+0x4b/0x90 [ 41.159542] ? skb_get_poff+0x4b/0x90 [ 41.163207] bpf_skb_get_pay_offset+0xe/0x20 [ 41.167471] ___bpf_prog_run+0x45f/0x10d0 [ 41.171475] __bpf_prog_run32+0x39/0x50 [ 41.175305] ? lockdep_hardirqs_on+0xef/0x180 [ 41.179656] ? ktime_get+0x6b/0x110 [ 41.183143] test_bpf_init+0x5ab/0x1000 [test_bpf] [ 41.187933] ? 0xffffffffc02e2000 [ 41.191244] do_one_initcall+0x5f/0x2b7 [ 41.195074] ? rcu_read_lock_sched_held+0x81/0x90 [ 41.199770] ? kmem_cache_alloc_trace+0x1de/0x210 [ 41.204469] ? do_init_module+0x27/0x212 [ 41.208387] do_init_module+0x5f/0x212 [ 41.212138] load_module+0x20f5/0x2640 [ 41.215886] __do_sys_finit_module+0xd1/0xf0 [ 41.220156] ? __do_sys_finit_module+0xd1/0xf0 [ 41.224626] __x64_sys_finit_module+0x1a/0x20 [ 41.228984] do_syscall_64+0x4f/0x190 [ 41.232645] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 41.237697] RIP: 0033:0x7fcb52d087f9 [ 41.241266] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f e6 2b 00 f7 d8 64 89 01 48 [ 41.260004] RSP: 002b:00007ffe780dd828 EFLAGS: 00000206 ORIG_RAX: 0000000000000139 [ 41.267589] RAX: ffffffffffffffda RBX: 00000000006aba70 RCX: 00007fcb52d087f9 [ 41.274737] RDX: 0000000000000000 RSI: 0000000000418424 RDI: 0000000000000003 [ 41.281861] RBP: 0000000000418424 R08: 0000000000000000 R09: 0000000000000000 [ 41.288985] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000000000 [ 41.296108] R13: 0000000000040000 R14: 0000000000000000 R15: 0000000000000000 [ 41.303234] Modules linked in: test_bpf(+) x86_pkg_temp_thermal fuse [ 41.309590] CR2: 0000000000001460 [ 41.312930] ---[ end trace a7d5229a26c41aad ]--- [ 41.317541] RIP: 0010:__skb_flow_dissect+0xd9/0x1740 [ 41.322497] Code: 7b 79 ff 85 c0 41 5a 74 0d 80 3d 06 cd 00 01 00 0f 84 4f 05 00 00 4d 85 ff 0f 84 4a 02 00 00 49 8b 47 10 48 8b 80 40 05 00 00 <4c> 8b 80 60 14 00 00 4c 89 85 28 ff ff ff e8 54 7b 79 ff 85 c0 4c [ 41.341235] RSP: 0018:ffff9accc1cf79c0 EFLAGS: 00010286 [ 41.346452] RAX: 0000000000000000 RBX: 000000000000000e RCX: 000000002c29b266 [ 41.353588] RDX: 0000000097969774 RSI: 0000000000000000 RDI: 0000000000000001 [ 41.360716] RBP: ffff9accc1cf7ac0 R08: ffffffff9b7517e9 R09: 0000000000000002 [ 41.367841] R10: ffffffff9b7517e9 R11: ffffffff9c662080 R12: ffffffff9c78b620 [ 41.374964] R13: 0000000000000008 R14: ffff9accc1cf7aec R15: ffff882f575e6800 [ 41.382089] FS: 00007fcb533fe740(0000) GS:ffff882f5fb80000(0000) knlGS:0000000000000000 [ 41.390165] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.395903] CR2: 0000000000001460 CR3: 000000045b606002 CR4: 00000000003606e0 [ 41.403026] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.410153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.417275] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/include/linux/percpu-rwsem.h:34 [ 41.432199] in_atomic(): 1, irqs_disabled(): 1, pid: 2790, name: modprobe [ 41.438977] INFO: lockdep is turned off. [ 41.442893] irq event stamp: 13766 [ 41.446292] hardirqs last enabled at (13765): [<ffffffff9af037eb>] ktime_get+0x6b/0x110 [ 41.454369] hardirqs last disabled at (13766): [<ffffffff9ae01c6b>] trace_hardirqs_off_thunk+0x1a/0x1c [ 41.463658] softirqs last enabled at (13728): [<ffffffff9be0032d>] __do_softirq+0x32d/0x42f [ 41.472084] softirqs last disabled at (13711): [<ffffffff9ae70679>] irq_exit+0xc9/0xd0 [ 41.479996] CPU: 3 PID: 2790 Comm: modprobe Tainted: G D 4.19.0-rc4-next-20180920 #1 [ 41.489026] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 41.496496] Call Trace: [ 41.498943] dump_stack+0x70/0xa5 [ 41.502261] ___might_sleep+0x152/0x240 [ 41.506091] __might_sleep+0x4a/0x80 [ 41.509679] exit_signals+0x33/0x240 [ 41.513249] do_exit+0xb1/0xc60 [ 41.516387] rewind_stack_do_exit+0x17/0x20 [ 41.520587] RIP: 0033:0x7fcb52d087f9 [ 41.524177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f e6 2b 00 f7 d8 64 89 01 48 [ 41.542914] RSP: 002b:00007ffe780dd828 EFLAGS: 00000206 ORIG_RAX: 0000000000000139 [ 41.550471] RAX: ffffffffffffffda RBX: 00000000006aba70 RCX: 00007fcb52d087f9 [ 41.557608] RDX: 0000000000000000 RSI: 0000000000418424 RDI: 0000000000000003 [ 41.564735] RBP: 0000000000418424 R08: 0000000000000000 R09: 0000000000000000 [ 41.571860] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000000000 [ 41.578985] R13: 0000000000040000 R14: 0000000000000000 R15: 0000000000000000 e)
Bug reported, https://bugs.linaro.org/show_bug.cgi?id=4006
Daniel,
On Mon, 8 Oct 2018 at 18:58, Daniel Borkmann daniel@iogearbox.net wrote:
On 10/08/2018 03:13 PM, Naresh Kamboju wrote:
BPF test case test_kmod.sh hangs on all devices running linux next.
- cd /opt/kselftests/default-in-kernel/bpf
- ./test_kmod.sh
sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory [ JIT enabled:0 hardened:0 ]
https://lkft.validation.linaro.org/scheduler/job/429726
Test hangs started from 4.19.0-rc4-next-20180918. Linux version 4.19.0-rc4-next-20180918 (oe-user@oe-host) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Sep 18 05:26:00 UTC 2018
History can be compared from this page. https://qa-reports.linaro.org/lkft/linux-next-oe/tests/kselftest/bpf_test_km...
OTOH, There is a kernel BUG,
This is quite an old linux-next kernel, should be fixed by 100811936f89 ("bpf: test_bpf: add init_net to dev for flow_dissector"). Please make sure you have that commit included in your testing:
I will re-validate on latest code base and let you know.
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=...
Thanks for the quick reply.
- Naresh
Thanks, Daniel
Hi Naresh,
Please use shuah@kernel.org for faster responses. I updated MAINTAINERS entry a while back removing shuahkh@osg.samsung.com address due to IT infrastructure changes at Samsung.
On 10/08/2018 08:55 AM, Naresh Kamboju wrote:
Daniel,
On Mon, 8 Oct 2018 at 18:58, Daniel Borkmann daniel@iogearbox.net wrote:
On 10/08/2018 03:13 PM, Naresh Kamboju wrote:
BPF test case test_kmod.sh hangs on all devices running linux next.
- cd /opt/kselftests/default-in-kernel/bpf
- ./test_kmod.sh
sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory sysctl: cannot stat /proc/sys/net/core/bpf_jit_harden: No such file or directory [ JIT enabled:0 hardened:0 ]
https://lkft.validation.linaro.org/scheduler/job/429726
Test hangs started from 4.19.0-rc4-next-20180918. Linux version 4.19.0-rc4-next-20180918 (oe-user@oe-host) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Sep 18 05:26:00 UTC 2018
History can be compared from this page. https://qa-reports.linaro.org/lkft/linux-next-oe/tests/kselftest/bpf_test_km...
OTOH, There is a kernel BUG,
This is quite an old linux-next kernel, should be fixed by 100811936f89 ("bpf: test_bpf: add init_net to dev for flow_dissector"). Please make sure you have that commit included in your testing:
I will re-validate on latest code base and let you know.
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=...
Thanks for the quick reply.
Great. Looks like this has been sorted. Thanks Daniel.
thanks, -- Shuah
OTOH, There is a kernel BUG,
This is quite an old linux-next kernel, should be fixed by 100811936f89 ("bpf: test_bpf: add init_net to dev for flow_dissector"). Please make sure you have that commit included in your testing:
This patch included in the linux next tree.
I will re-validate on latest code base and let you know.
test_kmod.sh PASS on linux-next.
+ ./test_kmod.sh [ JIT enabled:0 hardened:0 ] [ 25.886816] test_bpf: #0 TAX jited:0 441 435 436 PASS [ 25.889223] test_bpf: #1 TXA jited:0 144 143 143 PASS <trim> [ 105.557950] test_bpf: #377 JNE signed compare, test 7 jited:1 46 PASS [ 105.564354] test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed] test_bpf: ok [ 105.564354] test_bpf: Summary: 378 PASSED, 0 FAILED
Thank you - Naresh
Hi Shuah,
On Mon, 8 Oct 2018 at 20:46, Shuah Khan shuah.kh@samsung.com wrote:
Hi Naresh,
Please use shuah@kernel.org for faster responses. I updated MAINTAINERS entry a while back removing shuahkh@osg.samsung.com address due to IT infrastructure changes at Samsung.
+1
Thank you.
Best Regards Naresh Kamboju
linux-kselftest-mirror@lists.linaro.org
-
Daniel Borkmann -
Naresh Kamboju -
Shuah Khan