[PATCH 0/7] KVM: x86: Improve the handling of debug exceptions during instruction emulation
During my testing, I found that guest debugging with 'DR6.BD' does not work in instruction emulation, as the current code only considers the guest's DR7. Upon reviewing the code, I also observed that the checks for the userspace guest debugging feature and the guest's own debugging feature are repeated in different places during instruction emulation, but the overall logic is the same. If guest debugging is enabled, it needs to exit to userspace; otherwise, a #DB exception needs to be injected into the guest. Therefore, as suggested by Jiangshan Lai, some cleanup has been done for #DB handling in instruction emulation in this patchset. A new function named 'kvm_inject_emulated_db()' is introduced to consolidate all the checking logic. Moreover, I hope we can make the #DB interception path use the same function as well.
Additionally, when I looked into the single-step #DB handling in instruction emulation, I noticed that the interrupt shadow is toggled, but it is not considered in the single-step #DB injection. This oversight causes VM entry to fail on VMX (due to pending debug exceptions checking) or breaks the 'MOV SS' suppressed #DB. For the latter, I have kept the behavior for now in my patchset, as I need some suggestions.
Hou Wenlong (7): KVM: x86: Set guest DR6 by kvm_queue_exception_p() in instruction emulation KVM: x86: Check guest debug in DR access instruction emulation KVM: x86: Only check effective code breakpoint in emulation KVM: x86: Consolidate KVM_GUESTDBG_SINGLESTEP check into the kvm_inject_emulated_db() KVM: VMX: Set 'BS' bit in pending debug exceptions during instruction emulation KVM: selftests: Verify guest debug DR7.GD checking during instruction emulation KVM: selftests: Verify 'BS' bit checking in pending debug exception during VM entry
arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/emulate.c | 14 +-- arch/x86/kvm/kvm_emulate.h | 7 +- arch/x86/kvm/vmx/main.c | 9 ++ arch/x86/kvm/vmx/vmx.c | 14 ++- arch/x86/kvm/vmx/x86_ops.h | 1 + arch/x86/kvm/x86.c | 109 +++++++++++------- arch/x86/kvm/x86.h | 7 ++ .../selftests/kvm/include/x86/processor.h | 3 +- tools/testing/selftests/kvm/x86/debug_regs.c | 64 +++++++++- 11 files changed, 167 insertions(+), 63 deletions(-)
base-commit: ecbcc2461839e848970468b44db32282e5059925 -- 2.31.1
Similar to the global disable test case in x86's debug_regs test, use 'KVM_FEP' to trigger instruction emulation in order to verify the guest debug DR7.GD checking during instruction emulation.
Signed-off-by: Hou Wenlong houwenlong.hwl@antgroup.com --- tools/testing/selftests/kvm/x86/debug_regs.c | 25 +++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/x86/debug_regs.c b/tools/testing/selftests/kvm/x86/debug_regs.c index 2d814c1d1dc4..ba80b77c2869 100644 --- a/tools/testing/selftests/kvm/x86/debug_regs.c +++ b/tools/testing/selftests/kvm/x86/debug_regs.c @@ -19,6 +19,7 @@ uint32_t guest_value;
extern unsigned char sw_bp, hw_bp, write_data, ss_start, bd_start; +extern unsigned char fep_bd_start;
static void guest_code(void) { @@ -64,6 +65,12 @@ static void guest_code(void)
/* DR6.BD test */ asm volatile("bd_start: mov %%dr0, %%rax" : : : "rax"); + + if (is_forced_emulation_enabled) { + /* DR6.BD test for emulation */ + asm volatile(KVM_FEP "fep_bd_start: mov %%dr0, %%rax" : : : "rax"); + } + GUEST_DONE(); }
@@ -185,7 +192,7 @@ int main(void) target_dr6); }
- /* Finally test global disable */ + /* test global disable */ memset(&debug, 0, sizeof(debug)); debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP; debug.arch.debugreg[7] = 0x400 | DR7_GD; @@ -202,6 +209,22 @@ int main(void) run->debug.arch.pc, target_rip, run->debug.arch.dr6, target_dr6);
+ /* test global disable in emulation */ + if (is_forced_emulation_enabled) { + /* Skip the 3-bytes "mov dr0" */ + vcpu_skip_insn(vcpu, 3); + vcpu_run(vcpu); + TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && + run->debug.arch.exception == DB_VECTOR && + run->debug.arch.pc == CAST_TO_RIP(fep_bd_start) && + run->debug.arch.dr6 == target_dr6, + "DR7.GD: exit %d exception %d rip 0x%llx " + "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", + run->exit_reason, run->debug.arch.exception, + run->debug.arch.pc, target_rip, run->debug.arch.dr6, + target_dr6); + } + /* Disable all debug controls, run to the end */ memset(&debug, 0, sizeof(debug)); vcpu_guest_debug_set(vcpu, &debug);
In the x86's debug_regs test, add a test case to cover the scenario where single-step with STI in VMX sets the 'BS' bit in pending debug exceptions for #DB interception and instruction emulation in both cases.
Signed-off-by: Hou Wenlong houwenlong.hwl@antgroup.com --- .../selftests/kvm/include/x86/processor.h | 3 +- tools/testing/selftests/kvm/x86/debug_regs.c | 41 +++++++++++++++++-- 2 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/kvm/include/x86/processor.h b/tools/testing/selftests/kvm/include/x86/processor.h index 488d516c4f6f..f5827cca813e 100644 --- a/tools/testing/selftests/kvm/include/x86/processor.h +++ b/tools/testing/selftests/kvm/include/x86/processor.h @@ -34,7 +34,8 @@ extern uint64_t guest_tsc_khz;
#define NMI_VECTOR 0x02
-#define X86_EFLAGS_FIXED (1u << 1) +#define X86_EFLAGS_FIXED (1u << 1) +#define X86_EFLAGS_TF (1u << 8)
#define X86_CR4_VME (1ul << 0) #define X86_CR4_PVI (1ul << 1) diff --git a/tools/testing/selftests/kvm/x86/debug_regs.c b/tools/testing/selftests/kvm/x86/debug_regs.c index ba80b77c2869..60dea0116b21 100644 --- a/tools/testing/selftests/kvm/x86/debug_regs.c +++ b/tools/testing/selftests/kvm/x86/debug_regs.c @@ -15,11 +15,31 @@
#define IRQ_VECTOR 0xAA
+#define CAST_TO_RIP(v) ((unsigned long long)&(v)) + /* For testing data access debug BP */ uint32_t guest_value;
extern unsigned char sw_bp, hw_bp, write_data, ss_start, bd_start; -extern unsigned char fep_bd_start; +extern unsigned char fep_bd_start, fep_sti_start, fep_sti_end; + +static void guest_db_handler(struct ex_regs *regs) +{ + static int count; + unsigned long target_rips[2] = { + CAST_TO_RIP(fep_sti_start), + CAST_TO_RIP(fep_sti_end), + }; + + __GUEST_ASSERT(regs->rip == target_rips[count], "STI: unexpected rip 0x%lx (should be 0x%lx)", + regs->rip, target_rips[count]); + regs->rflags &= ~X86_EFLAGS_TF; + count++; +} + +static void guest_irq_handler(struct ex_regs *regs) +{ +}
static void guest_code(void) { @@ -69,13 +89,25 @@ static void guest_code(void) if (is_forced_emulation_enabled) { /* DR6.BD test for emulation */ asm volatile(KVM_FEP "fep_bd_start: mov %%dr0, %%rax" : : : "rax"); + + /* pending debug exceptions for emulation */ + asm volatile("pushf\n\t" + "orq $" __stringify(X86_EFLAGS_TF) ", (%rsp)\n\t" + "popf\n\t" + "sti\n\t" + "fep_sti_start:" + "cli\n\t" + "pushf\n\t" + "orq $" __stringify(X86_EFLAGS_TF) ", (%rsp)\n\t" + "popf\n\t" + KVM_FEP "sti\n\t" + "fep_sti_end:" + "cli\n\t"); }
GUEST_DONE(); }
-#define CAST_TO_RIP(v) ((unsigned long long)&(v)) - static void vcpu_skip_insn(struct kvm_vcpu *vcpu, int insn_len) { struct kvm_regs regs; @@ -110,6 +142,9 @@ int main(void) vm = vm_create_with_one_vcpu(&vcpu, guest_code); run = vcpu->run;
+ vm_install_exception_handler(vm, DB_VECTOR, guest_db_handler); + vm_install_exception_handler(vm, IRQ_VECTOR, guest_irq_handler); + /* Test software BPs - int3 */ memset(&debug, 0, sizeof(debug)); debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP;
linux-kselftest-mirror@lists.linaro.org
-
Hou Wenlong