Hi Shuah,

On Thu, Oct 04, 2018 at 02:13:51PM -0600, Shuah Khan wrote:

Hi Sean,

Thanks for the patch. I just happened to see this when Mauro sent it to me. Doesn't look like linux-ksefltest and I weren't on the patch?

This is true, and that is an oversight on my behalf.

Thank you for your review -- I agree with all your points and thanks for the helpful tips as well. I will fix for v2.

Thanks again,

Sean

On 07/17/2018 03:33 PM, Sean Young (by way of Mauro Carvalho Chehab mchehab+samsung@kernel.org) wrote:

...

ir-loopback can transmit IR on one rc device and check the correct scancode and protocol is decoded on a different rc device. This can be used to check IR transmission between two rc devices. Using rc-loopback, we use it to check the IR encoders and decoders themselves.

Signed-off-by: Sean Young sean@mess.org

tools/testing/selftests/Makefile | 1 + tools/testing/selftests/ir/.gitignore | 1 + tools/testing/selftests/ir/Makefile | 19 ++ tools/testing/selftests/ir/config | 12 ++ tools/testing/selftests/ir/ir-loopback.c | 209 ++++++++++++++++++++++ tools/testing/selftests/ir/ir-loopback.sh | 28 +++ 6 files changed, 270 insertions(+) create mode 100644 tools/testing/selftests/ir/.gitignore create mode 100644 tools/testing/selftests/ir/Makefile create mode 100644 tools/testing/selftests/ir/config create mode 100644 tools/testing/selftests/ir/ir-loopback.c create mode 100755 tools/testing/selftests/ir/ir-loopback.sh

Why not add to the existing media directory? ../selftests/media_tests?

...

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index f1fe492c8e17..995034ea5546 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -15,6 +15,7 @@ TARGETS += futex TARGETS += gpio TARGETS += intel_pstate TARGETS += ipc +TARGETS += ir

Does this test depend on any hardware being present in the system?

...

TARGETS += kcmp TARGETS += kvm TARGETS += lib diff --git a/tools/testing/selftests/ir/.gitignore b/tools/testing/selftests/ir/.gitignore new file mode 100644 index 000000000000..87bf2989b678 --- /dev/null +++ b/tools/testing/selftests/ir/.gitignore @@ -0,0 +1 @@ +ir-loopback diff --git a/tools/testing/selftests/ir/Makefile b/tools/testing/selftests/ir/Makefile new file mode 100644 index 000000000000..501b464e56b5 --- /dev/null +++ b/tools/testing/selftests/ir/Makefile @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +uname_M := $(shell uname -m 2>/dev/null || echo not) +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/) +ifeq ($(ARCH),i386)

•    ARCH := x86
  

• CFLAGS := -DCONFIG_X86_32 -D__i386__

+endif +ifeq ($(ARCH),x86_64)

• ARCH := x86
• CFLAGS := -DCONFIG_X86_64 -D__x86_64__

+endif

+CFLAGS += -I../../../../usr/include/

+TEST_PROGS := ir-loopback.sh

+TEST_GEN_PROGS := ir-loopback

Looks like ir-loopback get run from ir-loopback.sh. TEST_GEN_PROGS_EXTENDED is the right variable to use in this case.

TEST_GEN_PROGS_EXTENDED := ir-loopback

...

+include ../lib.mk diff --git a/tools/testing/selftests/ir/config b/tools/testing/selftests/ir/config new file mode 100644 index 000000000000..78e041e9319e --- /dev/null +++ b/tools/testing/selftests/ir/config @@ -0,0 +1,12 @@ +CONFIG_RC_CORE=y +CONFIG_RC_LOOPBACK=y +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_IR_IMON_DECODER=m diff --git a/tools/testing/selftests/ir/ir-loopback.c b/tools/testing/selftests/ir/ir-loopback.c new file mode 100644 index 000000000000..95b6f0f2f1f5 --- /dev/null +++ b/tools/testing/selftests/ir/ir-loopback.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0 +// test ir decoder +// +// Copyright (C) 2018 Sean Young sean@mess.org

+// When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback +// will send this IR to the receiver side, where we try to read the decoded +// IR. Decoding happens in a separate kernel thread, so we will need to +// wait until that is scheduled, hence we use poll to check for read +// readiness.

+#include <linux/lirc.h> +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> +#include <string.h> +#include <unistd.h> +#include <poll.h> +#include <time.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <dirent.h> +#include <sys/stat.h> +#include <fcntl.h>

+#define TEST_SCANCODES 10 +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))

+static const struct {

• enum rc_proto proto;
• const char *name;
• unsigned int mask;
• const char *decoder;

+} protocols[] = {

• { RC_PROTO_RC5, "rc-5", 0x1f7f, "rc-5" },
• { RC_PROTO_RC5X_20, "rc-5x-20", 0x1f7f3f, "rc-5" },
• { RC_PROTO_RC5_SZ, "rc-5-sz", 0x2fff, "rc-5-sz" },
• { RC_PROTO_JVC, "jvc", 0xffff, "jvc" },
• { RC_PROTO_SONY12, "sony-12", 0x1f007f, "sony" },
• { RC_PROTO_SONY15, "sony-15", 0xff007f, "sony" },
• { RC_PROTO_SONY20, "sony-20", 0x1fff7f, "sony" },
• { RC_PROTO_NEC, "nec", 0xffff, "nec" },
• { RC_PROTO_NECX, "nec-x", 0xffffff, "nec" },
• { RC_PROTO_NEC32, "nec-32", 0xffffffff, "nec" },
• { RC_PROTO_SANYO, "sanyo", 0x1fffff, "sanyo" },
• { RC_PROTO_RC6_0, "rc-6-0", 0xffff, "rc-6" },
• { RC_PROTO_RC6_6A_20, "rc-6-6a-20", 0xfffff, "rc-6" },
• { RC_PROTO_RC6_6A_24, "rc-6-6a-24", 0xffffff, "rc-6" },
• { RC_PROTO_RC6_6A_32, "rc-6-6a-32", 0xffffffff, "rc-6" },
• { RC_PROTO_RC6_MCE, "rc-6-mce", 0x00007fff, "rc-6" },
• { RC_PROTO_SHARP, "sharp", 0x1fff, "sharp" },

+};

+int lirc_open(const char *rc) +{

• struct dirent *dent;
• char buf[100];
• DIR *d;
• int fd;
• snprintf(buf, sizeof(buf), "/sys/class/rc/%s", rc);
• d = opendir(buf);
• if (!d) {

• printf("cannot open %s: %m\n", buf);
  

• exit(1);
  

• }

In this case, you will have to differentiate file not found case and use ksft_exit_skip() to skip the test.

...

• while ((dent = readdir(d)) != NULL) {

• if (!strncmp(dent->d_name, "lirc", 4)) {
  

• 	snprintf(buf, sizeof(buf), "/dev/%s", dent->d_name);
  

• 	break;
  

• }
  

• }
• if (!dent) {

• printf("cannot find lirc device for %s\n", rc);
  

• exit(1);
  

• }

This might be a Skip condition as opposed to error. In general when test can't be run due unmet dependencies, please use Skip and not fail.

...

• closedir(d);
• fd = open(buf, O_RDWR | O_NONBLOCK);
• if (fd == -1) {

• printf("cannot open: %s: %m\n", buf);
  

• exit(1);
  

• }
• return fd;

+}

+int main(int argc, char **argv) +{

• unsigned int mode;
• char buf[100];
• int rlircfd, wlircfd, protocolfd, i, n;
• int errors = 0;
• srand(time(NULL));
• if (argc != 3) {

• printf("Usage: %s <write rcN> <read rcN>n", argv[0]);
  

• return 2;
  

• }

Please don't use random return codes. Return codes are interpreted by the common framework. Please check kselftest.h to see which one makes sense.

...

• rlircfd = lirc_open(argv[2]);
• mode = LIRC_MODE_SCANCODE;
• if (ioctl(rlircfd, LIRC_SET_REC_MODE, &mode)) {

• printf("failed to set scancode rec mode %s: %m\n", argv[2]);
  

• return 1;
  

• }

Please don't use random return codes. Return codes are interpreted by the common framework. Please check kselftest.h to see which one makes sense.

...

• wlircfd = lirc_open(argv[1]);
• if (ioctl(wlircfd, LIRC_SET_SEND_MODE, &mode)) {

• printf("failed to set scancode send mode %s: %m\n", argv[1]);
  

• return 1;
  

• }

Same as above.

...

• snprintf(buf, sizeof(buf), "/sys/class/rc/%s/protocols", argv[2]);
• protocolfd = open(buf, O_WRONLY);
• if (protocolfd == -1) {

• printf("failed to open %s: %m\n", buf);
  

• return 1;
  

• }

Same as above.

...

• printf("Sending IR on %s and receiving IR on %s.\n", argv[1], argv[2]);
• for (i=0; i<ARRAY_SIZE(protocols); i++) {

• if (write(protocolfd, protocols[i].decoder,
  

• 	 strlen(protocols[i].decoder)) == -1) {
  

• 	printf("failed to set write decoder\n");
  

• 	return 1;
  

• }
  

• printf("Testing protocol %s for decoder %s (%d/%d)...\n",
  

•        protocols[i].name, protocols[i].decoder,
  

•        i + 1, (int)ARRAY_SIZE(protocols));
  

• for (n=0; n<TEST_SCANCODES; n++) {
  

• 	unsigned scancode = rand() & protocols[i].mask;
  

• 	unsigned rc_proto = protocols[i].proto;
  

• 	if (rc_proto == RC_PROTO_RC6_MCE)
  

• 		scancode |= 0x800f0000;
  

• 	if (rc_proto == RC_PROTO_NECX &&
  

• 	    (((scancode >> 16) ^ ~(scancode >> 8)) & 0xff) == 0)
  

• 		continue;
  

• 	if (rc_proto == RC_PROTO_NEC32 &&
  

• 	    (((scancode >> 8) ^ ~scancode) & 0xff) == 0)
  

• 		continue;
  

• 	struct lirc_scancode lsc = {
  

• 		.rc_proto = rc_proto,
  

• 		.scancode = scancode
  

• 	};
  

• 	printf("Testing scancode:%x\n", scancode);
  

• 	while (write(wlircfd, &lsc, sizeof(lsc)) < 0) {
  

• 		if (errno == EINTR)
  

• 			continue;
  

• 		printf("failed to send ir: %m\n");
  

• 		return 1;
  

• 	}
  

• 	struct pollfd pfd = { .fd = rlircfd, .events = POLLIN };
  

• 	struct lirc_scancode lsc2;
  

• 	poll(&pfd, 1, 1000);
  

• 	bool decoded = true;
  

• 	while (read(rlircfd, &lsc2, sizeof(lsc2)) < 0) {
  

• 		if (errno == EINTR)
  

• 			continue;
  

• 		printf("no scancode decoded: %m\n");
  

• 		errors++;
  

• 		decoded = false;
  

• 		break;
  

• 	}
  

• 	if (!decoded)
  

• 		continue;
  

• 	if (lsc.rc_proto != lsc2.rc_proto) {
  

• 		printf("decoded protocol is different: %d\n", lsc2.rc_proto);
  

• 		errors++;
  

• 	}
  

• 	if (lsc.scancode != lsc2.scancode) {
  

• 		printf("decoded scancode is different: %llx\n", lsc2.scancode);
  

• 		errors++;
  

• 	}
  

• }
  

• printf("OK\n");
  

• }
• close(rlircfd);
• close(wlircfd);
• close(protocolfd);
• return errors > 0;

+} diff --git a/tools/testing/selftests/ir/ir-loopback.sh b/tools/testing/selftests/ir/ir-loopback.sh new file mode 100755 index 000000000000..72be64a45cc5 --- /dev/null +++ b/tools/testing/selftests/ir/ir-loopback.sh @@ -0,0 +1,28 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0

+GREEN='\033[0;92m' +RED='\033[0;31m' +NC='\033[0m' # No Color

+modprobe rc-loopback

Please check rc-loopback exists or not and handle modprobe failures. If module doesn't exit, the test should exit with skip code.

...

+for i in /sys/class/rc/rc* +do

• if grep -q DRV_NAME=rc-loopback $i/uevent
• then

• RCDEV=$(echo $i | sed sQ/sys/class/rc/QQ)
  

• fi

+done

+if [ -n $RCDEV ]; +then

• TYPE=ir-loopback
• ./ir-loopback $RCDEV $RCDEV
• ret=$?
• if [ $ret -ne 0 ]; then

• echo -e ${RED}"FAIL: $TYPE"${NC}
  

• else

• echo -e ${GREEN}"PASS: $TYPE"${NC}
  

• fi

+fi

Please check tools/testing/selftests/lib/*.sh for examples on how to handle loading test modules and error/skip conditions.

Please refer to the following or other tests that call ksft_* interfaces. tools/testing/selftests/membarrier tools/testing/selftests/breakpoints

thanks, -- Shuah