fcnal-test.sh already includes lib.sh, use relevant helpers instead of sleeping. The first chunk is replacing sleep after killing background commands. All remaining ones replace sleep after starting nettest as a server with wait_local_port_listen.
Reviewed-by: David Ahern dsahern@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org --- v2: no changes, previous posting had a trivial Makefile conflict v1: https://lore.kernel.org/20250907012116.3315344-1-kuba@kernel.org --- tools/testing/selftests/net/fcnal-test.sh | 430 +++++++++++----------- 1 file changed, 215 insertions(+), 215 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 4fcc38907e48..0e3304d37fd0 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -189,7 +189,7 @@ show_hint() kill_procs() { killall nettest ping ping6 >/dev/null 2>&1 - sleep 1 + slowwait 2 sh -c 'test -z "$(pgrep '"'^(nettest|ping|ping6)$'"')"' }
set_ping_group() @@ -875,7 +875,7 @@ ipv4_tcp_md5_novrf() # basic use case log_start run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Single address config"
@@ -883,7 +883,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password"
@@ -891,7 +891,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password"
@@ -899,7 +899,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -910,7 +910,7 @@ ipv4_tcp_md5_novrf() # client in prefix log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config"
@@ -918,7 +918,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password"
@@ -926,7 +926,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -943,7 +943,7 @@ ipv4_tcp_md5() # basic use case log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config"
@@ -951,7 +951,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -959,7 +959,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -967,7 +967,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since server config differs from client" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -978,7 +978,7 @@ ipv4_tcp_md5() # client in prefix log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config"
@@ -986,7 +986,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -994,7 +994,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -1005,14 +1005,14 @@ ipv4_tcp_md5() log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
@@ -1020,7 +1020,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
@@ -1028,21 +1028,21 @@ ipv4_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
@@ -1050,7 +1050,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
@@ -1058,7 +1058,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -1082,14 +1082,14 @@ test_ipv4_md5_vrf__vrf_server__no_bind_ifindex() log_start show_hint "Simulates applications using VRF without TCP_MD5SIG_FLAG_IFINDEX" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: VRF-bound server, unbound key accepts connection"
log_start show_hint "Binding both the socket and the key is not required but it works" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: VRF-bound server, bound key accepts connection" } @@ -1103,25 +1103,25 @@ test_ipv4_md5_vrf__global_server__bind_ifindex0()
log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Global server, Key bound to ifindex=0 rejects VRF connection"
log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection" log_start
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts VRF connection"
log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts non-VRF connection"
@@ -1193,7 +1193,7 @@ ipv4_tcp_novrf() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -1201,7 +1201,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server"
@@ -1221,13 +1221,13 @@ ipv4_tcp_novrf() do log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client"
log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind"
@@ -1249,7 +1249,7 @@ ipv4_tcp_novrf() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -1257,7 +1257,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1266,7 +1266,7 @@ ipv4_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -1274,7 +1274,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Global server, device client, local connection"
@@ -1283,7 +1283,7 @@ ipv4_tcp_novrf() log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection" done @@ -1291,7 +1291,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -1323,19 +1323,19 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 1 "Global server"
log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server"
log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server"
@@ -1352,7 +1352,7 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection"
@@ -1374,14 +1374,14 @@ ipv4_tcp_vrf() log_start show_hint "client socket should be bound to VRF" run_cmd nettest -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Global server"
log_start show_hint "client socket should be bound to VRF" run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server"
@@ -1396,7 +1396,7 @@ ipv4_tcp_vrf() log_start show_hint "client socket should be bound to device" run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server"
@@ -1406,7 +1406,7 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since client is not bound to VRF" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" done @@ -1418,13 +1418,13 @@ ipv4_tcp_vrf() do log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} log_test_addr ${a} $? 0 "Client, VRF bind"
log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind"
@@ -1443,7 +1443,7 @@ ipv4_tcp_vrf() do log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" done @@ -1451,26 +1451,26 @@ ipv4_tcp_vrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection"
log_start show_hint "Should fail 'No route to host' since client is out of VRF scope" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" } @@ -1509,7 +1509,7 @@ ipv4_udp_novrf() do log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server"
@@ -1522,7 +1522,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server"
@@ -1533,31 +1533,31 @@ ipv4_udp_novrf() do log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client"
log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device bind"
log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device send via cmsg"
log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF"
log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} -U log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF, with connect()"
@@ -1580,7 +1580,7 @@ ipv4_udp_novrf() do log_start run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -1588,7 +1588,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1597,7 +1597,7 @@ ipv4_udp_novrf() log_start show_hint "Should fail 'Connection refused' since address is out of device scope" run_cmd nettest -s -D -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -1605,25 +1605,25 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection"
log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -C -r ${a} log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection"
log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} -U log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection, with connect()"
@@ -1636,28 +1636,28 @@ ipv4_udp_novrf() log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 2 "Global server, device client, local connection"
log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -U log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()"
@@ -1667,7 +1667,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -1709,19 +1709,19 @@ ipv4_udp_vrf() log_start show_hint "Fails because ingress is in a VRF and global server is disabled" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 1 "Global server"
log_start run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server"
log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1733,7 +1733,7 @@ ipv4_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is out of scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 1 "Global server, VRF client, local connection" done @@ -1741,26 +1741,26 @@ ipv4_udp_vrf() a=${NSA_IP} log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
a=${NSA_IP} log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1775,19 +1775,19 @@ ipv4_udp_vrf() do log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server"
log_start run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server"
log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1802,13 +1802,13 @@ ipv4_udp_vrf() # log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP} log_test $? 0 "VRF client"
log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP} log_test $? 0 "Enslaved device client"
@@ -1829,31 +1829,31 @@ ipv4_udp_vrf() a=${NSA_IP} log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1861,7 +1861,7 @@ ipv4_udp_vrf() do log_start run_cmd nettest -D -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" done @@ -1870,7 +1870,7 @@ ipv4_udp_vrf() do log_start run_cmd nettest -s -D -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" done @@ -2093,7 +2093,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2107,7 +2107,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2120,7 +2120,7 @@ ipv4_rt() a=${NSA_IP} log_start run_cmd nettest ${varg} -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2134,7 +2134,7 @@ ipv4_rt() # log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} & sleep 3 run_cmd ip link del ${VRF} @@ -2145,7 +2145,7 @@ ipv4_rt()
log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} & sleep 3 run_cmd ip link del ${VRF} @@ -2161,7 +2161,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2175,7 +2175,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2189,7 +2189,7 @@ ipv4_rt() log_start
run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2200,7 +2200,7 @@ ipv4_rt()
log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2211,7 +2211,7 @@ ipv4_rt()
log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2561,7 +2561,7 @@ ipv6_tcp_md5_novrf() # basic use case log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Single address config"
@@ -2569,7 +2569,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password"
@@ -2577,7 +2577,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password"
@@ -2585,7 +2585,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -2596,7 +2596,7 @@ ipv6_tcp_md5_novrf() # client in prefix log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config"
@@ -2604,7 +2604,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password"
@@ -2612,7 +2612,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -2629,7 +2629,7 @@ ipv6_tcp_md5() # basic use case log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config"
@@ -2637,7 +2637,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -2645,7 +2645,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -2653,7 +2653,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since server config differs from client" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -2664,7 +2664,7 @@ ipv6_tcp_md5() # client in prefix log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config"
@@ -2672,7 +2672,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -2680,7 +2680,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -2691,14 +2691,14 @@ ipv6_tcp_md5() log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
@@ -2706,7 +2706,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
@@ -2714,21 +2714,21 @@ ipv6_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
@@ -2736,7 +2736,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
@@ -2744,7 +2744,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -2772,7 +2772,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -2793,7 +2793,7 @@ ipv6_tcp_novrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 0 "Client" done @@ -2802,7 +2802,7 @@ ipv6_tcp_novrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" done @@ -2822,7 +2822,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -2830,7 +2830,7 @@ ipv6_tcp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -2839,7 +2839,7 @@ ipv6_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -6 -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -2847,7 +2847,7 @@ ipv6_tcp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection"
@@ -2856,7 +2856,7 @@ ipv6_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection" done @@ -2865,7 +2865,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" done @@ -2898,7 +2898,7 @@ ipv6_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server" done @@ -2907,7 +2907,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -2916,7 +2916,7 @@ ipv6_tcp_vrf() a=${NSA_LINKIP6}%${NSB_DEV} log_start run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server"
@@ -2924,7 +2924,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -2943,7 +2943,7 @@ ipv6_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection"
@@ -2964,7 +2964,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -2973,7 +2973,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -2982,13 +2982,13 @@ ipv6_tcp_vrf() a=${NSA_LINKIP6}%${NSB_DEV} log_start run_cmd nettest -6 -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server"
log_start run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server"
@@ -2996,7 +2996,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -3016,7 +3016,7 @@ ipv6_tcp_vrf() log_start show_hint "Fails 'Connection refused' since client is not in VRF" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" done @@ -3029,7 +3029,7 @@ ipv6_tcp_vrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} log_test_addr ${a} $? 0 "Client, VRF bind" done @@ -3038,7 +3038,7 @@ ipv6_tcp_vrf() log_start show_hint "Fails since VRF device does not allow linklocal addresses" run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} log_test_addr ${a} $? 1 "Client, VRF bind"
@@ -3046,7 +3046,7 @@ ipv6_tcp_vrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" done @@ -3071,7 +3071,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" done @@ -3079,7 +3079,7 @@ ipv6_tcp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection"
@@ -3087,13 +3087,13 @@ ipv6_tcp_vrf() log_start show_hint "Should fail since unbound client is out of VRF scope" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
@@ -3101,7 +3101,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" done @@ -3141,13 +3141,13 @@ ipv6_udp_novrf() do log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server"
log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -3155,7 +3155,7 @@ ipv6_udp_novrf() a=${NSA_LO_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server"
@@ -3165,7 +3165,7 @@ ipv6_udp_novrf() #log_start #show_hint "Should fail since loopback address is out of scope" #run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - #sleep 1 + wait_local_port_listen ${NSA} 12345 udp #run_cmd_nsb nettest -6 -D -r ${a} #log_test_addr ${a} $? 1 "Device server"
@@ -3185,25 +3185,25 @@ ipv6_udp_novrf() do log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client"
log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device bind"
log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device send via cmsg"
log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF"
@@ -3225,7 +3225,7 @@ ipv6_udp_novrf() do log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -3233,7 +3233,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -3242,7 +3242,7 @@ ipv6_udp_novrf() log_start show_hint "Should fail 'Connection refused' since address is out of device scope" run_cmd nettest -6 -s -D -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 1 "Device server, local connection" done @@ -3250,19 +3250,19 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection"
log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a} log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a} log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection"
@@ -3271,28 +3271,28 @@ ipv6_udp_novrf() log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection"
log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -U log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" done @@ -3300,7 +3300,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3314,7 +3314,7 @@ ipv6_udp_novrf() run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${NSA_IP6} log_test $? 0 "UDP in - LLA to GUA"
@@ -3338,7 +3338,7 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 1 "Global server" done @@ -3347,7 +3347,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -3356,7 +3356,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" done @@ -3378,7 +3378,7 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 1 "Global server, VRF client, local conn" done @@ -3387,7 +3387,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" done @@ -3396,25 +3396,25 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 1 "Global server, device client, local conn"
log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -3429,7 +3429,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -3438,7 +3438,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -3447,7 +3447,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" done @@ -3465,7 +3465,7 @@ ipv6_udp_vrf() # log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6} log_test $? 0 "VRF client"
@@ -3476,7 +3476,7 @@ ipv6_udp_vrf()
log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6} log_test $? 0 "Enslaved device client"
@@ -3491,13 +3491,13 @@ ipv6_udp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
#log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3505,13 +3505,13 @@ ipv6_udp_vrf() a=${VRF_IP6} log_start run_cmd nettest -6 -D -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3527,25 +3527,25 @@ ipv6_udp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local conn"
log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3557,7 +3557,7 @@ ipv6_udp_vrf() # link local addresses log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6} log_test $? 0 "Global server, linklocal IP"
@@ -3568,7 +3568,7 @@ ipv6_udp_vrf()
log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6} log_test $? 0 "Enslaved device client, linklocal IP"
@@ -3579,7 +3579,7 @@ ipv6_udp_vrf()
log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6} log_test $? 0 "Enslaved device client, local conn - linklocal IP"
@@ -3592,7 +3592,7 @@ ipv6_udp_vrf() run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${NSA_IP6} log_test $? 0 "UDP in - LLA to GUA"
@@ -3771,7 +3771,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3785,7 +3785,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3799,7 +3799,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3814,7 +3814,7 @@ ipv6_rt() # log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} & sleep 3 run_cmd ip link del ${VRF} @@ -3825,7 +3825,7 @@ ipv6_rt()
log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} & sleep 3 run_cmd ip link del ${VRF} @@ -3842,7 +3842,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3856,7 +3856,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3869,7 +3869,7 @@ ipv6_rt() a=${NSA_IP6} log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3880,7 +3880,7 @@ ipv6_rt()
log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3891,7 +3891,7 @@ ipv6_rt()
log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3950,7 +3950,7 @@ netfilter_tcp_reset() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" done @@ -3968,7 +3968,7 @@ netfilter_icmp() do log_start run_cmd nettest ${arg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${arg} -r ${a} log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" done @@ -4007,7 +4007,7 @@ netfilter_tcp6_reset() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" done @@ -4025,7 +4025,7 @@ netfilter_icmp6() do log_start run_cmd nettest -6 -s ${arg} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 ${arg} -r ${a} log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" done @@ -4221,12 +4221,12 @@ use_case_snat_on_vrf() run_cmd ip6tables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP6} -o ${VRF}
run_cmd_nsb nettest -s -l ${NSB_IP} -p ${port} & - sleep 1 + wait_local_port_listen ${NSB} ${port} tcp run_cmd nettest -d ${VRF} -r ${NSB_IP} -p ${port} log_test $? 0 "IPv4 TCP connection over VRF with SNAT"
run_cmd_nsb nettest -6 -s -l ${NSB_IP6} -p ${port} & - sleep 1 + wait_local_port_listen ${NSB} ${port} tcp run_cmd nettest -6 -d ${VRF} -r ${NSB_IP6} -p ${port} log_test $? 0 "IPv6 TCP connection over VRF with SNAT"
On Mon, 8 Sep 2025 13:09:49 -0700 Jakub Kicinski wrote:
kill_procs() { killall nettest ping ping6 >/dev/null 2>&1
- sleep 1
- slowwait 2 sh -c 'test -z "$(pgrep '"'^(nettest|ping|ping6)$'"')"'
}
This makes some ping tests fail.
https://netdev-3.bots.linux.dev/vmksft-net/results/289602/129-fcnal-other-sh... https://netdev-3.bots.linux.dev/vmksft-net/results/289602/128-fcnal-ipv6-sh/...
I only tested with debug kernels, but the non-debug get upset. I'll resend just the wait_local_port_listen changes. If the change gets more complex it's probably good to separate them out in the first place.
On 9/9/25 4:33 PM, Jakub Kicinski wrote:
On Mon, 8 Sep 2025 13:09:49 -0700 Jakub Kicinski wrote:
kill_procs() { killall nettest ping ping6 >/dev/null 2>&1
- sleep 1
- slowwait 2 sh -c 'test -z "$(pgrep '"'^(nettest|ping|ping6)$'"')"'
}
This makes some ping tests fail.
https://netdev-3.bots.linux.dev/vmksft-net/results/289602/129-fcnal-other-sh... https://netdev-3.bots.linux.dev/vmksft-net/results/289602/128-fcnal-ipv6-sh/...
I only tested with debug kernels, but the non-debug get upset. I'll resend just the wait_local_port_listen changes. If the change gets more complex it's probably good to separate them out in the first place.
That is surprising to me. I will take look tomorrow.
On Tue, 9 Sep 2025 16:59:28 -0600 David Ahern wrote:
This makes some ping tests fail.
https://netdev-3.bots.linux.dev/vmksft-net/results/289602/129-fcnal-other-sh... https://netdev-3.bots.linux.dev/vmksft-net/results/289602/128-fcnal-ipv6-sh/...
I only tested with debug kernels, but the non-debug get upset. I'll resend just the wait_local_port_listen changes. If the change gets more complex it's probably good to separate them out in the first place.
That is surprising to me. I will take look tomorrow.
Thanks! FWIW I repro'd one with "pause on fail" enabled and trying to ping manually also wasn't working. Something odd.
On 9/9/25 6:03 PM, Jakub Kicinski wrote:
On Tue, 9 Sep 2025 16:59:28 -0600 David Ahern wrote:
This makes some ping tests fail.
https://netdev-3.bots.linux.dev/vmksft-net/results/289602/129-fcnal-other-sh... https://netdev-3.bots.linux.dev/vmksft-net/results/289602/128-fcnal-ipv6-sh/...
I only tested with debug kernels, but the non-debug get upset. I'll resend just the wait_local_port_listen changes. If the change gets more complex it's probably good to separate them out in the first place.
That is surprising to me. I will take look tomorrow.
Thanks! FWIW I repro'd one with "pause on fail" enabled and trying to ping manually also wasn't working. Something odd.
This fixes it:
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 69941520e8e5..a527e3556763 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -189,7 +189,7 @@ show_hint() kill_procs() { killall nettest ping ping6 >/dev/null 2>&1 - sleep 1 + slowwait 2 sh -c 'test -z "$(pgrep '"'^(nettest|ping|ping6)$'"')"' }
set_ping_group() @@ -424,6 +424,8 @@ create_ns() ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.accept_dad=0 }
# create veth pair to connect namespaces and apply addresses.
On Tue, 9 Sep 2025 20:17:34 -0600 David Ahern wrote:
That is surprising to me. I will take look tomorrow.
Thanks! FWIW I repro'd one with "pause on fail" enabled and trying to ping manually also wasn't working. Something odd.
This fixes it:
Do you want to send it officially? I don't think it will conflict with the outstanding patch
linux-kselftest-mirror@lists.linaro.org
-
David Ahern -
Jakub Kicinski