From: "Steven Rostedt (Google)" rostedt@goodmis.org
Add a test that writes longs strings, some over the size of the sub buffer and make sure that the entire content is there.
Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org --- Changes since v2: https://lore.kernel.org/linux-trace-kernel/20231212151632.25c9b67d@gandalf.l...
- Realized with the upcoming change of the dynamic subbuffer sizes, that this test will fail if the subbuffer is bigger than what the trace_seq can hold. Now the trace_marker does not always utilize the full subbuffer but the size of the trace_seq instead. As that size isn't available to user space, we can only just make sure all content is there.
.../ftrace/test.d/00basic/trace_marker.tc | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100755 tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc new file mode 100755 index 000000000000..b24aff5807df --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc @@ -0,0 +1,82 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Basic tests on writing to trace_marker +# requires: trace_marker +# flags: instance + +get_buffer_data_size() { + sed -ne 's/^.*data.*size:([0-9][0-9]*).*/\1/p' events/header_page +} + +get_buffer_data_offset() { + sed -ne 's/^.*data.*offset:([0-9][0-9]*).*/\1/p' events/header_page +} + +get_event_header_size() { + type_len=`sed -ne 's/^.*type_len.*:[^0-9]*([0-9][0-9]*).*/\1/p' events/header_event` + time_len=`sed -ne 's/^.*time_delta.*:[^0-9]*([0-9][0-9]*).*/\1/p' events/header_event` + array_len=`sed -ne 's/^.*array.*:[^0-9]*([0-9][0-9]*).*/\1/p' events/header_event` + total_bits=$((type_len+time_len+array_len)) + total_bits=$((total_bits+7)) + echo $((total_bits/8)) +} + +get_print_event_buf_offset() { + sed -ne 's/^.*buf.*offset:([0-9][0-9]*).*/\1/p' events/ftrace/print/format +} + +event_header_size=`get_event_header_size` +print_header_size=`get_print_event_buf_offset` + +data_offset=`get_buffer_data_offset` + +marker_meta=$((event_header_size+print_header_size)) + +make_str() { + cnt=$1 + # subtract two for \n\0 as marker adds these + cnt=$((cnt-2)) + printf -- 'X%.0s' $(seq $cnt) +} + +write_buffer() { + size=$1 + + str=`make_str $size` + + # clear the buffer + echo > trace + + # write the string into the marker + echo -n $str > trace_marker + + echo $str +} + +test_buffer() { + + size=`get_buffer_data_size` + oneline_size=$((size-marker_meta)) + echo size = $size + echo meta size = $marker_meta + + # Now add a little more the meta data overhead will overflow + + str=`write_buffer $size` + + # Make sure the line was broken + new_str=`awk ' /tracing_mark_write:/ { sub(/^.*tracing_mark_write: /,"");printf "%s", $0; exit}' trace` + + if [ "$new_str" = "$str" ]; then + exit fail; + fi + + # Make sure the entire line can be found + new_str=`awk ' /tracing_mark_write:/ { sub(/^.*tracing_mark_write: */,"");printf "%s", $0; }' trace` + + if [ "$new_str" != "$str" ]; then + exit fail; + fi +} + +test_buffer
The REs used in the sed commands below may be simplified as shown if desired.
On Wed, Dec 13, 2023 at 2:22 AM Steven Rostedt rostedt@goodmis.org wrote:
From: "Steven Rostedt (Google)" rostedt@goodmis.org
Add a test that writes longs strings, some over the size of the sub buffer and make sure that the entire content is there.
Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org
Changes since v2: https://lore.kernel.org/linux-trace-kernel/20231212151632.25c9b67d@gandalf.l...
- Realized with the upcoming change of the dynamic subbuffer sizes, that this test will fail if the subbuffer is bigger than what the trace_seq can hold. Now the trace_marker does not always utilize the full subbuffer but the size of the trace_seq instead. As that size isn't available to user space, we can only just make sure all content is there.
.../ftrace/test.d/00basic/trace_marker.tc | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100755 tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc new file mode 100755 index 000000000000..b24aff5807df --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc @@ -0,0 +1,82 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Basic tests on writing to trace_marker +# requires: trace_marker +# flags: instance
+get_buffer_data_size() {
sed -ne 's/^.*data.*size:\([0-9][0-9]*\).*/\1/p' events/header_page
sed -n 's!.*data.*size:([^;]*).*!\1!p' events/header_page
+}
+get_buffer_data_offset() {
sed -ne 's/^.*data.*offset:\([0-9][0-9]*\).*/\1/p' events/header_page
sed -n 's!.*data.*offset:([^;]*).*!\1!p' events/header_page
+}
+get_event_header_size() {
type_len=`sed -ne 's/^.*type_len.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`
type_len=`sed -n '/type_len.*bits/s![^0-9]*!!gp' events/header_event`
time_len=`sed -ne 's/^.*time_delta.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`
time_len=`sed -n '/time_delta/s![^0-9]*!!gp' events/header_event`
array_len=`sed -ne 's/^.*array.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`
array_len=`sed -n '/array/s![^0-9]*!!gp' events/header_event`
total_bits=$((type_len+time_len+array_len))total_bits=$((total_bits+7))echo $((total_bits/8))+}
+get_print_event_buf_offset() {
sed -ne 's/^.*buf.*offset:\([0-9][0-9]*\).*/\1/p' events/ftrace/print/format
sed -n 's!.*buf.*offset:([^;]*).*!\1!p' events/ftrace/print/format
+}
+event_header_size=`get_event_header_size` +print_header_size=`get_print_event_buf_offset`
+data_offset=`get_buffer_data_offset`
+marker_meta=$((event_header_size+print_header_size))
+make_str() {
cnt=$1# subtract two for \n\0 as marker adds thesecnt=$((cnt-2))printf -- 'X%.0s' $(seq $cnt)+}
+write_buffer() {
size=$1str=`make_str $size`# clear the bufferecho > trace# write the string into the markerecho -n $str > trace_markerecho $str+}
+test_buffer() {
size=`get_buffer_data_size`oneline_size=$((size-marker_meta))echo size = $sizeecho meta size = $marker_meta# Now add a little more the meta data overhead will overflowstr=`write_buffer $size`# Make sure the line was brokennew_str=`awk ' /tracing_mark_write:/ { sub(/^.*tracing_mark_write: /,"");printf "%s", $0; exit}' trace`if [ "$new_str" = "$str" ]; thenexit fail;fi# Make sure the entire line can be foundnew_str=`awk ' /tracing_mark_write:/ { sub(/^.*tracing_mark_write: */,"");printf "%s", $0; }' trace`if [ "$new_str" != "$str" ]; thenexit fail;fi+}
+test_buffer
2.42.0
On Wed, 13 Dec 2023 10:09:50 +0200 Alexander Kapshuk alexander.kapshuk@gmail.com wrote:
The REs used in the sed commands below may be simplified as shown if desired.
On Wed, Dec 13, 2023 at 2:22 AM Steven Rostedt rostedt@goodmis.org wrote:
From: "Steven Rostedt (Google)" rostedt@goodmis.org
Add a test that writes longs strings, some over the size of the sub buffer and make sure that the entire content is there.
Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org
Changes since v2: https://lore.kernel.org/linux-trace-kernel/20231212151632.25c9b67d@gandalf.l...
- Realized with the upcoming change of the dynamic subbuffer sizes, that this test will fail if the subbuffer is bigger than what the trace_seq can hold. Now the trace_marker does not always utilize the full subbuffer but the size of the trace_seq instead. As that size isn't available to user space, we can only just make sure all content is there.
.../ftrace/test.d/00basic/trace_marker.tc | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100755 tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc new file mode 100755 index 000000000000..b24aff5807df --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc @@ -0,0 +1,82 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Basic tests on writing to trace_marker +# requires: trace_marker +# flags: instance
+get_buffer_data_size() {
sed -ne 's/^.*data.*size:\([0-9][0-9]*\).*/\1/p' events/header_pagesed -n 's!.*data.*size:\([^;]*\).*!\1!p' events/header_page
Not sure the above change can be considered simpler, but it also loses out showing what exactly is being done.
With the original, I have:
sed -ne 's/^.*data.*size:([0-9][0-9]*).*/\1/p' events/header_page
Which is obvious that I'm grabbing a number for the size field.
sed -n 's!.*data.*size:([^;]*).*!\1!p' events/header_page
Shows that I'm grabbing something after size.
+}
+get_buffer_data_offset() {
sed -ne 's/^.*data.*offset:\([0-9][0-9]*\).*/\1/p' events/header_pagesed -n 's!.*data.*offset:\([^;]*\).*!\1!p' events/header_page
Same here.
+}
+get_event_header_size() {
type_len=`sed -ne 's/^.*type_len.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`type_len=`sed -n '/type_len.*bits/s![^0-9]*!!gp'events/header_event`
Honestly, the above may be "simplier" but I can't make out what exactly that line is doing without going back and looking at the text that's in the format field.
time_len=`sed -ne 's/^.*time_delta.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`time_len=`sed -n '/time_delta/s![^0-9]*!!gp' events/header_event`
array_len=`sed -ne 's/^.*array.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`array_len=`sed -n '/array/s![^0-9]*!!gp' events/header_event`
total_bits=$((type_len+time_len+array_len))total_bits=$((total_bits+7))echo $((total_bits/8))+}
+get_print_event_buf_offset() {
sed -ne 's/^.*buf.*offset:\([0-9][0-9]*\).*/\1/p' events/ftrace/print/formatsed -n 's!.*buf.*offset:\([^;]*\).*!\1!p' events/ftrace/print/format+}
Yeah, thanks for the suggestions, but I rather have it be more readable than "simplified". I write perl code the same way. I do not write it like any perl developer would, because I write it like C code. I want my code to be easily understandable.
RE can become extremely obfuscated. So, even though my REs are not the simplest, they tend to be rather easy to understand what they are doing, and why.
Cheers,
-- Steve
On Wed, Dec 13, 2023 at 4:57 PM Steven Rostedt rostedt@goodmis.org wrote:
On Wed, 13 Dec 2023 10:09:50 +0200 Alexander Kapshuk alexander.kapshuk@gmail.com wrote:
The REs used in the sed commands below may be simplified as shown if desired.
On Wed, Dec 13, 2023 at 2:22 AM Steven Rostedt rostedt@goodmis.org wrote:
From: "Steven Rostedt (Google)" rostedt@goodmis.org
Add a test that writes longs strings, some over the size of the sub buffer and make sure that the entire content is there.
Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org
Changes since v2: https://lore.kernel.org/linux-trace-kernel/20231212151632.25c9b67d@gandalf.l...
- Realized with the upcoming change of the dynamic subbuffer sizes, that this test will fail if the subbuffer is bigger than what the trace_seq can hold. Now the trace_marker does not always utilize the full subbuffer but the size of the trace_seq instead. As that size isn't available to user space, we can only just make sure all content is there.
.../ftrace/test.d/00basic/trace_marker.tc | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100755 tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc new file mode 100755 index 000000000000..b24aff5807df --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker.tc @@ -0,0 +1,82 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Basic tests on writing to trace_marker +# requires: trace_marker +# flags: instance
+get_buffer_data_size() {
sed -ne 's/^.*data.*size:\([0-9][0-9]*\).*/\1/p' events/header_pagesed -n 's!.*data.*size:\([^;]*\).*!\1!p' events/header_pageNot sure the above change can be considered simpler, but it also loses out showing what exactly is being done.
With the original, I have:
sed -ne 's/^.*data.*size:\([0-9][0-9]*\).*/\1/p' events/header_pageWhich is obvious that I'm grabbing a number for the size field.
sed -n 's!.*data.*size:\([^;]*\).*!\1!p' events/header_pageShows that I'm grabbing something after size.
+}
+get_buffer_data_offset() {
sed -ne 's/^.*data.*offset:\([0-9][0-9]*\).*/\1/p' events/header_pagesed -n 's!.*data.*offset:\([^;]*\).*!\1!p' events/header_pageSame here.
+}
+get_event_header_size() {
type_len=`sed -ne 's/^.*type_len.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`type_len=`sed -n '/type_len.*bits/s![^0-9]*!!gp'events/header_event`
Honestly, the above may be "simplier" but I can't make out what exactly that line is doing without going back and looking at the text that's in the format field.
time_len=`sed -ne 's/^.*time_delta.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`time_len=`sed -n '/time_delta/s![^0-9]*!!gp' events/header_event`
array_len=`sed -ne 's/^.*array.*:[^0-9]*\([0-9][0-9]*\).*/\1/p' events/header_event`array_len=`sed -n '/array/s![^0-9]*!!gp' events/header_event`
total_bits=$((type_len+time_len+array_len))total_bits=$((total_bits+7))echo $((total_bits/8))+}
+get_print_event_buf_offset() {
sed -ne 's/^.*buf.*offset:\([0-9][0-9]*\).*/\1/p' events/ftrace/print/formatsed -n 's!.*buf.*offset:\([^;]*\).*!\1!p' events/ftrace/print/format+}
Yeah, thanks for the suggestions, but I rather have it be more readable than "simplified". I write perl code the same way. I do not write it like any perl developer would, because I write it like C code. I want my code to be easily understandable.
RE can become extremely obfuscated. So, even though my REs are not the simplest, they tend to be rather easy to understand what they are doing, and why.
Cheers,
-- Steve
Fair enough. Thanks.
linux-kselftest-mirror@lists.linaro.org
-
Alexander Kapshuk -
Steven Rostedt