test_lwt_seg6local.sh isn't used by the BPF CI.

Add a new file in the test_progs framework to migrate the tests done by test_lwt_seg6local.sh. It uses the same network topology and the same BPF programs located in progs/test_lwt_seg6local.c. Use the network helpers instead of `nc` to exchange the final packet.

Remove test_lwt_seg6local.sh and its Makefile entry.

Signed-off-by: Bastien Curutchet (eBPF Foundation) bastien.curutchet@bootlin.com --- tools/testing/selftests/bpf/Makefile | 1 - .../selftests/bpf/prog_tests/lwt_seg6local.c | 176 +++++++++++++++++++++ tools/testing/selftests/bpf/test_lwt_seg6local.sh | 151 ------------------ 3 files changed, 176 insertions(+), 152 deletions(-)

diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index e6a02d5b87d123cef7e6b41bfbc96d34083f38e1..b9203be2697db61f541291c4a26defab9b0dbee7 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -100,7 +100,6 @@ TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c)

# Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ - test_lwt_seg6local.sh \ test_lirc_mode2.sh \ test_xdp_vlan_mode_generic.sh \ test_xdp_vlan_mode_native.sh \ diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_seg6local.c b/tools/testing/selftests/bpf/prog_tests/lwt_seg6local.c new file mode 100644 index 0000000000000000000000000000000000000000..3bc730b7c7fa0c4809c7c4ed6e00e7a7d12cb555 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_seg6local.c @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* Connects 6 network namespaces through veths. + * Each NS may have different IPv6 global scope addresses : + * + * NS1 NS2 NS3 NS4 NS5 NS6 + * lo veth1 <-> veth2 veth3 <-> veth4 veth5 <-> veth6 lo veth7 <-> veth8 veth9 <-> veth10 lo + * fb00 ::1 ::12 ::21 ::34 ::43 ::56 ::65 ::78 ::87 ::910 ::109 ::6 + * fd00 ::4 + * fc42 ::1 + * + * All IPv6 packets going to fb00::/16 through NS2 will be encapsulated in a + * IPv6 header with a Segment Routing Header, with segments : + * fd00::1 -> fd00::2 -> fd00::3 -> fd00::4 + * + * 3 fd00::/16 IPv6 addresses are binded to seg6local End.BPF actions : + * - fd00::1 : add a TLV, change the flags and apply a End.X action to fc42::1 + * - fd00::2 : remove the TLV, change the flags, add a tag + * - fd00::3 : apply an End.T action to fd00::4, through routing table 117 + * + * fd00::4 is a simple Segment Routing node decapsulating the inner IPv6 packet. + * Each End.BPF action will validate the operations applied on the SRH by the + * previous BPF program in the chain, otherwise the packet is dropped. + * + * An UDP datagram is sent from fb00::1 to fb00::6. The test succeeds if this + * datagram can be read on NS6 when binding to fb00::6. + */ + +#include "network_helpers.h" +#include "test_progs.h" + +#define NETNS_BASE "lwt-seg6local-" +#define BPF_FILE "test_lwt_seg6local.bpf.o" + +static void cleanup(void) +{ + int ns; + + for (ns = 1; ns < 7; ns++) + SYS_NOFAIL("ip netns del %s%d", NETNS_BASE, ns); +} + +static int setup(void) +{ + int ns; + + for (ns = 1; ns < 7; ns++) + SYS(fail, "ip netns add %s%d", NETNS_BASE, ns); + + SYS(fail, "ip -n %s6 link set dev lo up", NETNS_BASE); + + for (ns = 1; ns < 6; ns++) { + int local_id = ns * 2 - 1; + int peer_id = ns * 2; + int next_ns = ns + 1; + + SYS(fail, "ip -n %s%d link add veth%d type veth peer name veth%d netns %s%d", + NETNS_BASE, ns, local_id, peer_id, NETNS_BASE, next_ns); + + SYS(fail, "ip -n %s%d link set dev veth%d up", NETNS_BASE, ns, local_id); + SYS(fail, "ip -n %s%d link set dev veth%d up", NETNS_BASE, next_ns, peer_id); + + /* All link scope addresses to veths */ + SYS(fail, "ip -n %s%d -6 addr add fb00::%d%d/16 dev veth%d scope link", + NETNS_BASE, ns, local_id, peer_id, local_id); + SYS(fail, "ip -n %s%d -6 addr add fb00::%d%d/16 dev veth%d scope link", + NETNS_BASE, next_ns, peer_id, local_id, peer_id); + } + + + SYS(fail, "ip -n %s5 -6 route add fb00::109 table 117 dev veth9 scope link", NETNS_BASE); + + SYS(fail, "ip -n %s1 -6 addr add fb00::1/16 dev lo", NETNS_BASE); + SYS(fail, "ip -n %s1 -6 route add fb00::6 dev veth1 via fb00::21", NETNS_BASE); + + SYS(fail, "ip -n %s2 -6 route add fb00::6 encap bpf in obj %s sec encap_srh dev veth2", + NETNS_BASE, BPF_FILE); + SYS(fail, "ip -n %s2 -6 route add fd00::1 dev veth3 via fb00::43 scope link", NETNS_BASE); + + SYS(fail, "ip -n %s3 -6 route add fc42::1 dev veth5 via fb00::65", NETNS_BASE); + SYS(fail, + "ip -n %s3 -6 route add fd00::1 encap seg6local action End.BPF endpoint obj %s sec add_egr_x dev veth4", + NETNS_BASE, BPF_FILE); + + SYS(fail, + "ip -n %s4 -6 route add fd00::2 encap seg6local action End.BPF endpoint obj %s sec pop_egr dev veth6", + NETNS_BASE, BPF_FILE); + SYS(fail, "ip -n %s4 -6 addr add fc42::1 dev lo", NETNS_BASE); + SYS(fail, "ip -n %s4 -6 route add fd00::3 dev veth7 via fb00::87", NETNS_BASE); + + SYS(fail, "ip -n %s5 -6 route add fd00::4 table 117 dev veth9 via fb00::109", NETNS_BASE); + SYS(fail, + "ip -n %s5 -6 route add fd00::3 encap seg6local action End.BPF endpoint obj %s sec inspect_t dev veth8", + NETNS_BASE, BPF_FILE); + + SYS(fail, "ip -n %s6 -6 addr add fb00::6/16 dev lo", NETNS_BASE); + SYS(fail, "ip -n %s6 -6 addr add fd00::4/16 dev lo", NETNS_BASE); + + for (ns = 1; ns < 6; ns++) + SYS(fail, "ip netns exec %s%d sysctl -wq net.ipv6.conf.all.forwarding=1", + NETNS_BASE, ns); + + SYS(fail, "ip netns exec %s6 sysctl -wq net.ipv6.conf.all.seg6_enabled=1", NETNS_BASE); + SYS(fail, "ip netns exec %s6 sysctl -wq net.ipv6.conf.lo.seg6_enabled=1", NETNS_BASE); + SYS(fail, "ip netns exec %s6 sysctl -wq net.ipv6.conf.veth10.seg6_enabled=1", NETNS_BASE); + + return 0; +fail: + return -1; +} + +#define SERVER_PORT 7330 +#define CLIENT_PORT 2121 +void test_lwt_seg6local(void) +{ + struct sockaddr_in6 server_addr = {}; + const char *ns1 = NETNS_BASE "1"; + const char *ns6 = NETNS_BASE "6"; + struct nstoken *nstoken = NULL; + const char *foobar = "foobar"; + ssize_t bytes; + int sfd, cfd; + char buf[7]; + + if (!ASSERT_OK(setup(), "setup")) + goto out; + + nstoken = open_netns(ns6); + if (!ASSERT_OK_PTR(nstoken, "open ns6")) + goto out; + + sfd = start_server_str(AF_INET6, SOCK_DGRAM, "fb00::6", SERVER_PORT, NULL); + if (!ASSERT_OK_FD(sfd, "start server")) + goto close_netns; + + close_netns(nstoken); + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto close_server; + + cfd = start_server_str(AF_INET6, SOCK_DGRAM, "fb00::1", CLIENT_PORT, NULL); + if (!ASSERT_OK_FD(cfd, "start client")) + goto close_server; + + close_netns(nstoken); + nstoken = NULL; + + /* Send a packet larger than MTU */ + server_addr.sin6_family = AF_INET6; + server_addr.sin6_port = htons(SERVER_PORT); + if (!ASSERT_EQ(inet_pton(AF_INET6, "fb00::6", &server_addr.sin6_addr), 1, + "build target addr")) + goto close_client; + + bytes = sendto(cfd, foobar, sizeof(foobar), 0, + (struct sockaddr *)&server_addr, sizeof(server_addr)); + if (!ASSERT_EQ(bytes, sizeof(foobar), "send packet")) + goto close_client; + + /* Verify we received all expected bytes */ + bytes = read(sfd, buf, sizeof(buf)); + if (!ASSERT_EQ(bytes, sizeof(buf), "receive packet")) + goto close_client; + ASSERT_STREQ(buf, foobar, "check udp packet"); + +close_client: + close(cfd); +close_server: + close(sfd); +close_netns: + close_netns(nstoken); + +out: + cleanup(); +} diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh deleted file mode 100755 index 9c74b88730ffd98f8e988a078d218ffbcd9ee95c..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh +++ /dev/null @@ -1,151 +0,0 @@ -#!/bin/bash -# Connects 6 network namespaces through veths. -# Each NS may have different IPv6 global scope addresses : -# NS1 ---- NS2 ---- NS3 ---- NS4 ---- NS5 ---- NS6 -# fb00::1 fd00::1 fd00::2 fd00::3 fb00::6 -# fc42::1 fd00::4 -# -# All IPv6 packets going to fb00::/16 through NS2 will be encapsulated in a -# IPv6 header with a Segment Routing Header, with segments : -# fd00::1 -> fd00::2 -> fd00::3 -> fd00::4 -# -# 3 fd00::/16 IPv6 addresses are binded to seg6local End.BPF actions : -# - fd00::1 : add a TLV, change the flags and apply a End.X action to fc42::1 -# - fd00::2 : remove the TLV, change the flags, add a tag -# - fd00::3 : apply an End.T action to fd00::4, through routing table 117 -# -# fd00::4 is a simple Segment Routing node decapsulating the inner IPv6 packet. -# Each End.BPF action will validate the operations applied on the SRH by the -# previous BPF program in the chain, otherwise the packet is dropped. -# -# An UDP datagram is sent from fb00::1 to fb00::6. The test succeeds if this -# datagram can be read on NS6 when binding to fb00::6. - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 -BPF_FILE="test_lwt_seg6local.bpf.o" -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" -readonly NS4="ns4-$(mktemp -u XXXXXX)" -readonly NS5="ns5-$(mktemp -u XXXXXX)" -readonly NS6="ns6-$(mktemp -u XXXXXX)" - -msg="skip all tests:" -if [ $UID != 0 ]; then - echo $msg please run this as root >&2 - exit $ksft_skip -fi - -TMP_FILE="/tmp/selftest_lwt_seg6local.txt" - -cleanup() -{ - if [ "$?" = "0" ]; then - echo "selftests: test_lwt_seg6local [PASS]"; - else - echo "selftests: test_lwt_seg6local [FAILED]"; - fi - - set +e - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null - ip netns del ${NS4} 2> /dev/null - ip netns del ${NS5} 2> /dev/null - ip netns del ${NS6} 2> /dev/null - rm -f $TMP_FILE -} - -set -e - -ip netns add ${NS1} -ip netns add ${NS2} -ip netns add ${NS3} -ip netns add ${NS4} -ip netns add ${NS5} -ip netns add ${NS6} - -trap cleanup 0 2 3 6 9 - -ip link add veth1 type veth peer name veth2 -ip link add veth3 type veth peer name veth4 -ip link add veth5 type veth peer name veth6 -ip link add veth7 type veth peer name veth8 -ip link add veth9 type veth peer name veth10 - -ip link set veth1 netns ${NS1} -ip link set veth2 netns ${NS2} -ip link set veth3 netns ${NS2} -ip link set veth4 netns ${NS3} -ip link set veth5 netns ${NS3} -ip link set veth6 netns ${NS4} -ip link set veth7 netns ${NS4} -ip link set veth8 netns ${NS5} -ip link set veth9 netns ${NS5} -ip link set veth10 netns ${NS6} - -ip netns exec ${NS1} ip link set dev veth1 up -ip netns exec ${NS2} ip link set dev veth2 up -ip netns exec ${NS2} ip link set dev veth3 up -ip netns exec ${NS3} ip link set dev veth4 up -ip netns exec ${NS3} ip link set dev veth5 up -ip netns exec ${NS4} ip link set dev veth6 up -ip netns exec ${NS4} ip link set dev veth7 up -ip netns exec ${NS5} ip link set dev veth8 up -ip netns exec ${NS5} ip link set dev veth9 up -ip netns exec ${NS6} ip link set dev veth10 up -ip netns exec ${NS6} ip link set dev lo up - -# All link scope addresses and routes required between veths -ip netns exec ${NS1} ip -6 addr add fb00::12/16 dev veth1 scope link -ip netns exec ${NS2} ip -6 addr add fb00::21/16 dev veth2 scope link -ip netns exec ${NS2} ip -6 addr add fb00::34/16 dev veth3 scope link -ip netns exec ${NS3} ip -6 addr add fb00::43/16 dev veth4 scope link -ip netns exec ${NS3} ip -6 addr add fb00::56/16 dev veth5 scope link -ip netns exec ${NS4} ip -6 addr add fb00::65/16 dev veth6 scope link -ip netns exec ${NS4} ip -6 addr add fb00::78/16 dev veth7 scope link -ip netns exec ${NS5} ip -6 addr add fb00::87/16 dev veth8 scope link -ip netns exec ${NS5} ip -6 addr add fb00::910/16 dev veth9 scope link -ip netns exec ${NS5} ip -6 route add fb00::109 table 117 dev veth9 scope link -ip netns exec ${NS6} ip -6 addr add fb00::109/16 dev veth10 scope link - -ip netns exec ${NS1} ip -6 addr add fb00::1/16 dev lo -ip netns exec ${NS1} ip -6 route add fb00::6 dev veth1 via fb00::21 - -ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj ${BPF_FILE} sec encap_srh dev veth2 -ip netns exec ${NS2} ip -6 route add fd00::1 dev veth3 via fb00::43 scope link - -ip netns exec ${NS3} ip -6 route add fc42::1 dev veth5 via fb00::65 -ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec add_egr_x dev veth4 - -ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec pop_egr dev veth6 -ip netns exec ${NS4} ip -6 addr add fc42::1 dev lo -ip netns exec ${NS4} ip -6 route add fd00::3 dev veth7 via fb00::87 - -ip netns exec ${NS5} ip -6 route add fd00::4 table 117 dev veth9 via fb00::109 -ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec inspect_t dev veth8 - -ip netns exec ${NS6} ip -6 addr add fb00::6/16 dev lo -ip netns exec ${NS6} ip -6 addr add fd00::4/16 dev lo - -ip netns exec ${NS1} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null -ip netns exec ${NS2} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null -ip netns exec ${NS3} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null -ip netns exec ${NS4} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null -ip netns exec ${NS5} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null - -ip netns exec ${NS6} sysctl net.ipv6.conf.all.seg6_enabled=1 > /dev/null -ip netns exec ${NS6} sysctl net.ipv6.conf.lo.seg6_enabled=1 > /dev/null -ip netns exec ${NS6} sysctl net.ipv6.conf.veth10.seg6_enabled=1 > /dev/null - -ip netns exec ${NS6} nc -l -6 -u -d 7330 > $TMP_FILE & -ip netns exec ${NS1} bash -c "echo 'foobar' | nc -w0 -6 -u -p 2121 -s fb00::1 fb00::6 7330" -sleep 5 # wait enough time to ensure the UDP datagram arrived to the last segment -kill -TERM $! - -if [[ $(< $TMP_FILE) != "foobar" ]]; then - exit 1 -fi - -exit 0