From: Jakub Kicinski kuba@kernel.org

Add basic XDP support by hooking in do_xdp_generic(). This should be enough to validate most basic XDP tests.

Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Mohsin Bashir mohsin.bashr@gmail.com --- drivers/net/netdevsim/netdev.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index f316e44130f7..ab2cdbf968a7 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -332,15 +332,32 @@ static int nsim_get_iflink(const struct net_device *dev) static int nsim_rcv(struct nsim_rq *rq, int budget) { struct net_device *dev = rq->napi.dev; + struct bpf_prog *xdp_prog; + struct netdevsim *ns; struct sk_buff *skb; unsigned int skblen; int i, ret;

+ ns = netdev_priv(dev); + xdp_prog = rcu_dereference(ns->xdp.prog); + for (i = 0; i < budget; i++) { if (skb_queue_empty(&rq->skb_queue)) break;

skb = skb_dequeue(&rq->skb_queue); + + if (xdp_prog) { + /* skb might be freed directly by XDP, save the len */ + skblen = skb->len; + + ret = do_xdp_generic(xdp_prog, &skb); + if (ret != XDP_PASS) { + dev_dstats_rx_add(dev, skblen); + continue; + } + } + /* skb might be discard at netif_receive_skb, save the len */ skblen = skb->len; skb_mark_napi_id(skb, &rq->napi); @@ -882,7 +899,7 @@ static void nsim_setup(struct net_device *dev) NETIF_F_TSO; dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS; dev->max_mtu = ETH_MAX_MTU; - dev->xdp_features = NETDEV_XDP_ACT_HW_OFFLOAD; + dev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_HW_OFFLOAD; }

static int nsim_queue_init(struct netdevsim *ns)

Test XDP_PASS/DROP in single buffer and multi buffer mode when XDP native support is available.

./drivers/net/xdp.py TAP version 13 1..4 ok 1 xdp.test_xdp_native_pass_sb ok 2 xdp.test_xdp_native_pass_mb ok 3 xdp.test_xdp_native_drop_sb ok 4 xdp.test_xdp_native_drop_mb # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Mohsin Bashir mohsin.bashr@gmail.com --- tools/testing/selftests/drivers/net/Makefile | 1 + tools/testing/selftests/drivers/net/xdp.py | 303 ++++++++++++++++++ .../selftests/net/lib/xdp_native.bpf.c | 158 +++++++++ 3 files changed, 462 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/xdp.py create mode 100644 tools/testing/selftests/net/lib/xdp_native.bpf.c

diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index bd309b2d3909..2ba7ae2bfe11 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -21,6 +21,7 @@ TEST_PROGS := \ stats.py \ shaper.py \ hds.py \ + xdp.py \ # end of TEST_PROGS

include ../../lib.mk diff --git a/tools/testing/selftests/drivers/net/xdp.py b/tools/testing/selftests/drivers/net/xdp.py new file mode 100755 index 000000000000..79a8156ed416 --- /dev/null +++ b/tools/testing/selftests/drivers/net/xdp.py @@ -0,0 +1,303 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +This file contains tests to verify native XDP support in network drivers. +The tests utilize the BPF program `xdp_native.bpf.o` from the `selftests.net.lib` +directory, with each test focusing on a specific aspect of XDP functionality. +""" +import random +import string +from dataclasses import dataclass +from enum import Enum + +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ne +from lib.py import KsftFailEx, NetDrvEpEnv +from lib.py import bkg, cmd, rand_port +from lib.py import ip, bpftool, defer + + +class TestConfig(Enum): + """Enum for XDP configuration options.""" + MODE = 0 # Configures the BPF program for a specific test + PORT = 1 # Port configuration to communicate with the remote host + + +class XDPAction(Enum): + """Enum for XDP actions.""" + PASS = 0 # Pass the packet up to the stack + DROP = 1 # Drop the packet + + +class XDPStats(Enum): + """Enum for XDP statistics.""" + RX = 0 # Count of valid packets received for testing + PASS = 1 # Count of packets passed up to the stack + DROP = 2 # Count of packets dropped + + +@dataclass +class BPFProgInfo: + """Data class to store information about a BPF program.""" + name: str # Name of the BPF program + file: str # BPF program object file + xdp_sec: str = "xdp" # XDP section name (e.g., "xdp" or "xdp.frags") + mtu: int = 1500 # Maximum Transmission Unit, default is 1500 + + +def _exchg_udp(cfg, port, test_string): + """ + Exchanges UDP packets between a local and remote host using the socat tool. + + Args: + cfg: Configuration object containing network settings. + port: Port number to use for the UDP communication. + test_string: String that the remote host will send. + + Returns: + The string received by the test host. + """ + cfg.require_cmd("socat", remote=True) + + rx_udp_cmd = f"socat -{cfg.addr_ipver} -T 2 -u UDP-RECV:{port},reuseport STDOUT" + tx_udp_cmd = f"echo {test_string} | socat -t 2 -u STDIN UDP:{cfg.baddr}:{port}" + + with bkg(rx_udp_cmd, exit_wait=True) as nc: + cmd(tx_udp_cmd, host=cfg.remote, shell=True) + + return nc.stdout.strip() + + +def _test_udp(cfg, port, size=256): + """ + Tests UDP packet exchange between a local and remote host. + + Args: + cfg: Configuration object containing network settings. + port: Port number to use for the UDP communication. + size: The length of the test string to be exchanged, default is 256 characters. + + Returns: + bool: True if the received string matches the sent string, False otherwise. + """ + test_str = "".join(random.choice(string.ascii_lowercase) for _ in range(size)) + recvd_str = _exchg_udp(cfg, port, test_str) + + return recvd_str == test_str + + +def _load_xdp_prog(cfg, bpf_info): + """ + Loads an XDP program onto a network interface. + + Args: + cfg: Configuration object containing network settings. + bpf_info: BPFProgInfo object containing information about the BPF program. + + Returns: + dict: A dictionary containing the XDP program ID, name, and associated map IDs. + """ + abs_path = cfg.net_lib_dir / bpf_info.file + prog_info = {} + + cmd(f"ip link set dev {cfg.remote_ifname} mtu {bpf_info.mtu}", shell=True, host=cfg.remote) + defer(ip, f"link set dev {cfg.remote_ifname} mtu 1500", host=cfg.remote) + + cmd( + f"ip link set dev {cfg.ifname} mtu {bpf_info.mtu} xdp obj {abs_path} sec {bpf_info.xdp_sec}", + shell=True + ) + defer(ip, f"link set dev {cfg.ifname} mtu 1500 xdp off") + + xdp_info = ip(f"-d link show dev {cfg.ifname}", json=True)[0] + prog_info["id"] = xdp_info["xdp"]["prog"]["id"] + prog_info["name"] = xdp_info["xdp"]["prog"]["name"] + prog_id = prog_info["id"] + + map_ids = bpftool(f"prog show id {prog_id}", json=True)["map_ids"] + prog_info["maps"] = {} + for map_id in map_ids: + name = bpftool(f"map show id {map_id}", json=True)["name"] + prog_info["maps"][name] = map_id + + return prog_info + + +def format_hex_bytes(value): + """ + Helper function that converts an integer into a formatted hexadecimal byte string. + + Args: + value: An integer representing the number to be converted. + + Returns: + A string representing hexadecimal equivalent of value, with bytes separated by spaces. + """ + hex_str = value.to_bytes(4, byteorder='little', signed=True) + return ' '.join(f'{byte:02x}' for byte in hex_str) + + +def _set_xdp_map(map_name, key, value): + """ + Updates an XDP map with a given key-value pair using bpftool. + + Args: + map_name: The name of the XDP map to update. + key: The key to update in the map, formatted as a hexadecimal string. + value: The value to associate with the key, formatted as a hexadecimal string. + """ + key_formatted = format_hex_bytes(key) + value_formatted = format_hex_bytes(value) + bpftool( + f"map update name {map_name} key hex {key_formatted} value hex {value_formatted}" + ) + + +def _get_stats(xdp_map_id): + """ + Retrieves and formats statistics from an XDP map. + + Args: + xdp_map_id: The ID of the XDP map from which to retrieve statistics. + + Returns: + A dictionary containing formatted packet statistics for various XDP actions. + The keys are based on the XDPStats Enum values. + + Raises: + KsftFailEx: If the stats retrieval fails. + """ + stats_dump = bpftool(f"map dump id {xdp_map_id}", json=True) + if not stats_dump: + raise KsftFailEx(f"Failed to get stats for map {xdp_map_id}") + + stats_formatted = {} + for key in range(0, 4): + val = stats_dump[key]["formatted"]["value"] + if stats_dump[key]["formatted"]["key"] == XDPStats.RX.value: + stats_formatted[XDPStats.RX.value] = val + elif stats_dump[key]["formatted"]["key"] == XDPStats.PASS.value: + stats_formatted[XDPStats.PASS.value] = val + elif stats_dump[key]["formatted"]["key"] == XDPStats.DROP.value: + stats_formatted[XDPStats.DROP.value] = val + + return stats_formatted + + +def _test_pass(cfg, bpf_info, msg_sz): + """ + Tests the XDP_PASS action by exchanging UDP packets. + + Args: + cfg: Configuration object containing network settings. + bpf_info: BPFProgInfo object containing information about the BPF program. + msg_sz: Size of the test message to send. + """ + + prog_info = _load_xdp_prog(cfg, bpf_info) + port = rand_port() + + _set_xdp_map("map_xdp_setup", TestConfig.MODE.value, XDPAction.PASS.value) + _set_xdp_map("map_xdp_setup", TestConfig.PORT.value, port) + + ksft_eq(_test_udp(cfg, port, msg_sz), True, "UDP packet exchange failed") + stats = _get_stats(prog_info["maps"]["map_xdp_stats"]) + + ksft_ne(stats[XDPStats.RX.value], 0, "RX stats should not be zero") + ksft_eq(stats[XDPStats.RX.value], stats[XDPStats.PASS.value], "RX and PASS stats mismatch") + + +def test_xdp_native_pass_sb(cfg): + """ + Tests the XDP_PASS action for single buffer case. + + Args: + cfg: Configuration object containing network settings. + """ + bpf_info = BPFProgInfo("xdp_prog", "xdp_native.bpf.o", "xdp", 1500) + + _test_pass(cfg, bpf_info, 256) + + +def test_xdp_native_pass_mb(cfg): + """ + Tests the XDP_PASS action for a multi-buff size. + + Args: + cfg: Configuration object containing network settings. + """ + bpf_info = BPFProgInfo("xdp_prog_frags", "xdp_native.bpf.o", "xdp.frags", 9000) + + _test_pass(cfg, bpf_info, 8000) + + +def _test_drop(cfg, bpf_info, msg_sz): + """ + Tests the XDP_DROP action by exchanging UDP packets. + + Args: + cfg: Configuration object containing network settings. + bpf_info: BPFProgInfo object containing information about the BPF program. + msg_sz: Size of the test message to send. + """ + + prog_info = _load_xdp_prog(cfg, bpf_info) + port = rand_port() + + _set_xdp_map("map_xdp_setup", TestConfig.MODE.value, XDPAction.DROP.value) + _set_xdp_map("map_xdp_setup", TestConfig.PORT.value, port) + + ksft_eq(_test_udp(cfg, port, msg_sz), False, "UDP packet exchange should fail") + stats = _get_stats(prog_info["maps"]["map_xdp_stats"]) + + ksft_ne(stats[XDPStats.RX.value], 0, "RX stats should be zero") + ksft_eq(stats[XDPStats.RX.value], stats[XDPStats.DROP.value], "RX and DROP stats mismatch") + + +def test_xdp_native_drop_sb(cfg): + """ + Tests the XDP_DROP action for a signle-buff case. + + Args: + cfg: Configuration object containing network settings. + """ + bpf_info = BPFProgInfo("xdp_prog", "xdp_native.bpf.o", "xdp", 1500) + + _test_drop(cfg, bpf_info, 256) + + +def test_xdp_native_drop_mb(cfg): + """ + Tests the XDP_DROP action for a multi-buff case. + + Args: + cfg: Configuration object containing network settings. + """ + bpf_info = BPFProgInfo("xdp_prog_frags", "xdp_native.bpf.o", "xdp.frags", 9000) + + _test_drop(cfg, bpf_info, 8000) + + +def main(): + """ + Main function to execute the XDP tests. + + This function runs a series of tests to validate the XDP support for + both the single and multi-buffer. It uses the NetDrvEpEnv context + manager to manage the network driver environment and the ksft_run + function to execute the tests. + """ + with NetDrvEpEnv(__file__) as cfg: + ksft_run( + [ + test_xdp_native_pass_sb, + test_xdp_native_pass_mb, + test_xdp_native_drop_sb, + test_xdp_native_drop_mb, + ], + args=(cfg,)) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/net/lib/xdp_native.bpf.c b/tools/testing/selftests/net/lib/xdp_native.bpf.c new file mode 100644 index 000000000000..90b34b2a4fef --- /dev/null +++ b/tools/testing/selftests/net/lib/xdp_native.bpf.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <stddef.h> +#include <linux/bpf.h> +#include <linux/in.h> +#include <linux/if_ether.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/udp.h> +#include <bpf/bpf_endian.h> +#include <bpf/bpf_helpers.h> + +enum { + XDP_MODE = 0, + XDP_PORT = 1, +} xdp_map_setup_keys; + +enum { + XDP_MODE_PASS = 0, + XDP_MODE_DROP = 1, +} xdp_map_modes; + +enum { + STATS_RX = 0, + STATS_PASS = 1, + STATS_DROP = 2, +} xdp_stats; + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __uint(max_entries, 2); + __type(key, __u32); + __type(value, __s32); +} map_xdp_setup SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __uint(max_entries, 4); + __type(key, __u32); + __type(value, __u64); +} map_xdp_stats SEC(".maps"); + +static void record_stats(struct xdp_md *ctx, __u32 stat_type) +{ + __u64 *count; + + count = bpf_map_lookup_elem(&map_xdp_stats, &stat_type); + + if (count) + __sync_fetch_and_add(count, 1); +} + +static struct udphdr *filter_udphdr(struct xdp_md *ctx, __u16 port) +{ + void *data_end = (void *)(long)ctx->data_end; + void *data = (void *)(long)ctx->data; + struct udphdr *udph = NULL; + struct ethhdr *eth = data; + + if (data + sizeof(*eth) > data_end) + return NULL; + + if (eth->h_proto == bpf_htons(ETH_P_IP)) { + struct iphdr *iph = data + sizeof(*eth); + + if (iph + 1 > (struct iphdr *)data_end || + iph->protocol != IPPROTO_UDP) + return NULL; + + udph = (void *)eth + sizeof(*iph) + sizeof(*eth); + } else if (eth->h_proto == bpf_htons(ETH_P_IPV6)) { + struct ipv6hdr *ipv6h = data + sizeof(*eth); + + if (ipv6h + 1 > (struct ipv6hdr *)data_end || + ipv6h->nexthdr != IPPROTO_UDP) + return NULL; + + udph = (void *)eth + sizeof(*ipv6h) + sizeof(*eth); + } else { + return NULL; + } + + if (udph + 1 > (struct udphdr *)data_end) + return NULL; + + if (udph->dest != bpf_htons(port)) + return NULL; + + record_stats(ctx, STATS_RX); + + return udph; +} + +static int xdp_mode_pass(struct xdp_md *ctx, __u16 port) +{ + struct udphdr *udph = NULL; + + udph = filter_udphdr(ctx, port); + if (!udph) + return XDP_PASS; + + record_stats(ctx, STATS_PASS); + + return XDP_PASS; +} + +static int xdp_mode_drop_handler(struct xdp_md *ctx, __u16 port) +{ + struct udphdr *udph = NULL; + + udph = filter_udphdr(ctx, port); + if (!udph) + return XDP_PASS; + + record_stats(ctx, STATS_DROP); + + return XDP_DROP; +} + +static int xdp_prog_common(struct xdp_md *ctx) +{ + __u32 key, *port; + __s32 *mode; + + key = XDP_MODE; + mode = bpf_map_lookup_elem(&map_xdp_setup, &key); + if (!mode) + return XDP_PASS; + + key = XDP_PORT; + port = bpf_map_lookup_elem(&map_xdp_setup, &key); + if (!port) + return XDP_PASS; + + switch (*mode) { + case XDP_MODE_PASS: + return xdp_mode_pass(ctx, (__u16)(*port)); + case XDP_MODE_DROP: + return xdp_mode_drop_handler(ctx, (__u16)(*port)); + } + + /* Default action is to simple pass */ + return XDP_PASS; +} + +SEC("xdp") +int xdp_prog(struct xdp_md *ctx) +{ + return xdp_prog_common(ctx); +} + +SEC("xdp.frags") +int xdp_prog_frags(struct xdp_md *ctx) +{ + return xdp_prog_common(ctx); +} + +char _license[] SEC("license") = "GPL";

Add test to validate support for the two cases of tail adjustment: 1) tail extension, and 2) tail shrinking across different frame sizes and offset values. For each of the two cases, test both the single and multi-buffer cases by choosing appropriate packet size.

Since tail adjustment support varies across drivers, classify the test as pass if at least one combination of packet size and offset from a pre-selected list results in a successful run. In case of an unsuccessful run, report the failure and highlight the packet size and offset values that caused the test to fail, as well as the values that resulted in the last successful run.

Note: The growing part of this test appears flaky for netdevsim, with inconsistent results depending on the availability of tailroom. Since tailroom is not explicitly reserved, in general, the test should fail due to insufficient tailroom. However, when truesize is expanded to include any remaining space on the page, enough tailroom becomes available, resulting in occasional test passes. On multiple real NICs including fbnic the test results are deterministic and repeatable.

./drivers/net/xdp.py TAP version 13 1..7 ok 1 xdp.test_xdp_native_pass_sb ok 2 xdp.test_xdp_native_pass_mb ok 3 xdp.test_xdp_native_drop_sb ok 4 xdp.test_xdp_native_drop_mb ok 5 xdp.test_xdp_native_tx_mb # Failed run: pkt_sz 2048, .... offset -256. Reason: Adjustment failed ok 6 xdp.test_xdp_native_adjst_tail_grow_data ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data

Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Mohsin Bashir mohsin.bashr@gmail.com --- tools/testing/selftests/drivers/net/xdp.py | 178 +++++++++++++++++- .../selftests/net/lib/xdp_native.bpf.c | 136 ++++++++++++- 2 files changed, 310 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/xdp.py b/tools/testing/selftests/drivers/net/xdp.py index b1611e5178a4..8d80f6860b8b 100755 --- a/tools/testing/selftests/drivers/net/xdp.py +++ b/tools/testing/selftests/drivers/net/xdp.py @@ -11,7 +11,7 @@ import string from dataclasses import dataclass from enum import Enum

-from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ne +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ne, ksft_pr from lib.py import KsftFailEx, NetDrvEpEnv from lib.py import bkg, cmd, rand_port from lib.py import ip, bpftool, defer @@ -21,6 +21,8 @@ class TestConfig(Enum): """Enum for XDP configuration options.""" MODE = 0 # Configures the BPF program for a specific test PORT = 1 # Port configuration to communicate with the remote host + ADJST_OFFSET = 2 # Tail/Head adjustment offset for extension/shrinking + ADJST_TAG = 3 # Adjustment tag to annotate the start and end of extension

class XDPAction(Enum): @@ -28,6 +30,7 @@ class XDPAction(Enum): PASS = 0 # Pass the packet up to the stack DROP = 1 # Drop the packet TX = 2 # Route the packet to the remote host + TAIL_ADJST = 3 # Adjust the tail of the packet

class XDPStats(Enum): @@ -36,6 +39,7 @@ class XDPStats(Enum): PASS = 1 # Count of packets passed up to the stack DROP = 2 # Count of packets dropped TX = 3 # Count of incoming packets routed to the remote host + ABORT = 4 # Count of packets that were aborted

@dataclass @@ -174,7 +178,7 @@ def _get_stats(xdp_map_id): raise KsftFailEx(f"Failed to get stats for map {xdp_map_id}")

stats_formatted = {} - for key in range(0, 4): + for key in range(0, 5): val = stats_dump[key]["formatted"]["value"] if stats_dump[key]["formatted"]["key"] == XDPStats.RX.value: stats_formatted[XDPStats.RX.value] = val @@ -184,6 +188,8 @@ def _get_stats(xdp_map_id): stats_formatted[XDPStats.DROP.value] = val elif stats_dump[key]["formatted"]["key"] == XDPStats.TX.value: stats_formatted[XDPStats.TX.value] = val + elif stats_dump[key]["formatted"]["key"] == XDPStats.ABORT.value: + stats_formatted[XDPStats.ABORT.value] = val

return stats_formatted

@@ -311,6 +317,172 @@ def test_xdp_native_tx_mb(cfg): ksft_eq(stats[XDPStats.TX.value], 1, "TX stats mismatch")

+def _validate_res(res, offset_lst, pkt_sz_lst): + """ + Validates the result of a test. + + Args: + res: The result of the test, which should be a dictionary with a "status" key. + + Raises: + KsftFailEx: If the test fails to pass any combination of offset and packet size. + """ + if "status" not in res: + raise KsftFailEx("Missing 'status' key in result dictionary") + + # Validate that not a single case was successful + if res["status"] == "fail": + if res["offset"] == offset_lst[0] and res["pkt_sz"] == pkt_sz_lst[0]: + raise KsftFailEx(f"{res['reason']}") + + # Get the previous offset and packet size to report the successful run + tmp_idx = offset_lst.index(res["offset"]) + prev_offset = offset_lst[tmp_idx - 1] + if tmp_idx == 0: + tmp_idx = pkt_sz_lst.index(res["pkt_sz"]) + prev_pkt_sz = pkt_sz_lst[tmp_idx - 1] + else: + prev_pkt_sz = res["pkt_sz"] + + # Use these values for error reporting + ksft_pr( + f"Failed run: pkt_sz {res['pkt_sz']}, offset {res['offset']}. " + f"Last successful run: pkt_sz {prev_pkt_sz}, offset {prev_offset}. " + f"Reason: {res['reason']}" + ) + + +def _check_for_failures(recvd_str, stats): + """ + Checks for common failures while adjusting headroom or tailroom. + + Args: + recvd_str: The string received from the remote host after sending a test string. + stats: A dictionary containing formatted packet statistics for various XDP actions. + + Returns: + str: A string describing the failure reason if a failure is detected, otherwise None. + """ + + # Any adjustment failure result in an abort hence, we track this counter + if stats[XDPStats.ABORT.value] != 0: + return "Adjustment failed" + + # Since we are using aggregate stats for a single test across all offsets and packet sizes + # we can't use RX stats only to track data exchange failure without taking a previous + # snapshot. An easier way is to simply check for non-zero length of received string. + if len(recvd_str) == 0: + return "Data exchange failed" + + # Check for RX and PASS stats mismatch. Ideally, they should be equal for a successful run + if stats[XDPStats.RX.value] != stats[XDPStats.PASS.value]: + return "RX stats mismatch" + + return None + + +def _test_xdp_native_tail_adjst(cfg, pkt_sz_lst, offset_lst): + """ + Tests the XDP tail adjustment functionality. + + This function loads the appropriate XDP program based on the provided + program name and configures the XDP map for tail adjustment. It then + validates the tail adjustment by sending and receiving UDP packets + with specified packet sizes and offsets. + + Args: + cfg: Configuration object containing network settings. + prog: Name of the XDP program to load. + pkt_sz_lst: List of packet sizes to test. + offset_lst: List of offsets to validate support for tail adjustment. + + Returns: + dict: A dictionary with test status and failure details if applicable. + """ + port = rand_port() + bpf_info = BPFProgInfo("xdp_prog_frags", "xdp_native.bpf.o", "xdp.frags", 9000) + + prog_info = _load_xdp_prog(cfg, bpf_info) + + # Configure the XDP map for tail adjustment + _set_xdp_map("map_xdp_setup", TestConfig.MODE.value, XDPAction.TAIL_ADJST.value) + _set_xdp_map("map_xdp_setup", TestConfig.PORT.value, port) + + for offset in offset_lst: + tag = format(random.randint(65, 90), "02x") + + _set_xdp_map("map_xdp_setup", TestConfig.ADJST_OFFSET.value, offset) + if offset < 0: + _set_xdp_map("map_xdp_setup", TestConfig.ADJST_TAG.value, int(tag, 16)) + + for pkt_sz in pkt_sz_lst: + test_str = "".join(random.choice(string.ascii_lowercase) for _ in range(pkt_sz)) + recvd_str = _exchg_udp(cfg, port, test_str) + stats = _get_stats(prog_info["maps"]["map_xdp_stats"]) + + failure = _check_for_failures(recvd_str, stats) + if failure is not None: + return { + "status": "fail", + "reason": failure, + "offset": offset, + "pkt_sz": pkt_sz, + } + + # Validate data content based on offset direction + expected_data = None + if offset < 0: + expected_data = test_str + '\n' + (0 - offset) * chr(int(tag, 16)) + else: + expected_data = test_str[0:pkt_sz - offset + 1] + + if recvd_str != expected_data: + return { + "status": "fail", + "reason": "Data mismatch", + "offset": offset, + "pkt_sz": pkt_sz, + } + + return {"status": "pass"} + + +def test_xdp_native_adjst_tail_grow_data(cfg): + """ + Tests the XDP tail adjustment by growing packet data. + + Args: + cfg: Configuration object containing network settings. + """ + pkt_sz_lst = [512, 1024, 2048] + offset_lst = [-16, -32, -64, -128, -256] + res = _test_xdp_native_tail_adjst( + cfg, + pkt_sz_lst, + offset_lst, + ) + + _validate_res(res, offset_lst, pkt_sz_lst) + + +def test_xdp_native_adjst_tail_shrnk_data(cfg): + """ + Tests the XDP tail adjustment by shrinking packet data. + + Args: + cfg: Configuration object containing network settings. + """ + pkt_sz_lst = [512, 1024, 2048] + offset_lst = [16, 32, 64, 128, 256] + res = _test_xdp_native_tail_adjst( + cfg, + pkt_sz_lst, + offset_lst, + ) + + _validate_res(res, offset_lst, pkt_sz_lst) + + def main(): """ Main function to execute the XDP tests. @@ -328,6 +500,8 @@ def main(): test_xdp_native_drop_sb, test_xdp_native_drop_mb, test_xdp_native_tx_mb, + test_xdp_native_adjst_tail_grow_data, + test_xdp_native_adjst_tail_shrnk_data, ], args=(cfg,)) ksft_exit() diff --git a/tools/testing/selftests/net/lib/xdp_native.bpf.c b/tools/testing/selftests/net/lib/xdp_native.bpf.c index 84376710d3fe..1b196a809a07 100644 --- a/tools/testing/selftests/net/lib/xdp_native.bpf.c +++ b/tools/testing/selftests/net/lib/xdp_native.bpf.c @@ -10,15 +10,23 @@ #include <bpf/bpf_endian.h> #include <bpf/bpf_helpers.h>

+#define min(a, b) ((a) < (b) ? (a) : (b)) + +#define MAX_ADJST_OFFSET 256 +#define MAX_PAYLOAD_LEN 9000 + enum { XDP_MODE = 0, XDP_PORT = 1, + XDP_ADJST_OFFSET = 2, + XDP_ADJST_TAG = 3, } xdp_map_setup_keys;

enum { XDP_MODE_PASS = 0, XDP_MODE_DROP = 1, XDP_MODE_TX = 2, + XDP_MODE_TAIL_ADJST = 3, } xdp_map_modes;

enum { @@ -26,18 +34,19 @@ enum { STATS_PASS = 1, STATS_DROP = 2, STATS_TX = 3, + STATS_ABORT = 4, } xdp_stats;

struct { __uint(type, BPF_MAP_TYPE_ARRAY); - __uint(max_entries, 2); + __uint(max_entries, 5); __type(key, __u32); __type(value, __s32); } map_xdp_setup SEC(".maps");

struct { __uint(type, BPF_MAP_TYPE_ARRAY); - __uint(max_entries, 4); + __uint(max_entries, 5); __type(key, __u32); __type(value, __u64); } map_xdp_stats SEC(".maps"); @@ -195,6 +204,127 @@ static int xdp_mode_tx_handler(struct xdp_md *ctx, __u16 port) return XDP_PASS; }

+static void *update_pkt(void *data, void *data_end, __s16 offset) +{ + struct ethhdr *eth = data; + struct udphdr *udph = NULL; + __u16 udp_len = 0; + + if (data + sizeof(*eth) > data_end) + return NULL; + + if (eth->h_proto == bpf_htons(ETH_P_IP)) { + struct iphdr *iph = data + sizeof(*eth); + __u16 total_len; + + if (iph + 1 > (struct iphdr *)data_end) + return NULL; + + total_len = bpf_ntohs(iph->tot_len) + offset; + iph->tot_len = bpf_htons(total_len); + + udph = (void *)eth + sizeof(*iph) + sizeof(*eth); + } else if (eth->h_proto == bpf_htons(ETH_P_IPV6)) { + struct ipv6hdr *ipv6h = data + sizeof(*eth); + __u16 payload_len; + + if (ipv6h + 1 > (struct ipv6hdr *)data_end) + return NULL; + + payload_len = bpf_ntohs(ipv6h->payload_len) + offset; + ipv6h->payload_len = bpf_htons(payload_len); + + udph = (void *)eth + sizeof(*ipv6h) + sizeof(*eth); + } else { + return NULL; + } + + if (udph == NULL || udph + 1 > (struct udphdr *)data_end) + return NULL; + + udp_len = bpf_ntohs(udph->len) + offset; + udph->len = bpf_htons(udp_len); + + return udph; +} + +static int xdp_tail_ext(struct xdp_md *ctx, __u16 port) +{ + void *data_end = (void *)(long)ctx->data_end; + void *data = (void *)(long)ctx->data; + struct udphdr *udph = NULL; + __s32 *adjust_offset, *val; + void *offset_ptr; + __u32 key; + __u8 tag; + + udph = filter_udphdr(ctx, port); + if (udph == NULL) + return XDP_PASS; + + key = XDP_ADJST_OFFSET; + adjust_offset = bpf_map_lookup_elem(&map_xdp_setup, &key); + if (!adjust_offset) + return XDP_PASS; + + /* Only attempt to shrink the data part */ + if (*adjust_offset > bpf_ntohs(udph->len)) + goto abort_pkt; + + if (bpf_xdp_adjust_tail(ctx, 0 - *adjust_offset) < 0) + goto abort_pkt; + + key = XDP_ADJST_TAG; + val = bpf_map_lookup_elem(&map_xdp_setup, &key); + if (!val) + goto abort_pkt; + tag = (__u8)(*val); + + data = (void *)(long)ctx->data; + data_end = (void *)(long)ctx->data_end; + + udph = update_pkt(data, data_end, (__s16)(0 - *adjust_offset)); + if (!udph) + goto abort_pkt; + + /* For the tail-shrink case, we can simply proceed to passing + * the packet up to the stack. For the tail-growth case, we + * insert appropriate tags at the start and end of the newly + * created space and then validate these tags in the BPF program + */ + if (*adjust_offset > 0) + goto pass_pkt; + + __u32 pkt_offset = bpf_ntohs(udph->len) - (__u32)(0 - *adjust_offset); + + /* The min operations here set the upper bound on the adjustment + * offset and offset_ptr allowing us to pass the BPF verifier check + */ + offset_ptr = (void *)udph + min(MAX_PAYLOAD_LEN, pkt_offset); + for (int i = 0; i < MAX_ADJST_OFFSET; i++) { + if (offset_ptr == (void *)udph + min(MAX_PAYLOAD_LEN, + bpf_ntohs(udph->len))) + break; + + if ((void *)(offset_ptr + 1) > data_end) + goto abort_pkt; + + __builtin_memcpy(offset_ptr, &tag, 1); + + offset_ptr++; + } + +pass_pkt: + record_stats(ctx, STATS_PASS); + + return XDP_PASS; + +abort_pkt: + record_stats(ctx, STATS_ABORT); + + return XDP_ABORTED; +} + static int xdp_prog_common(struct xdp_md *ctx) { __u32 key, *port; @@ -217,6 +347,8 @@ static int xdp_prog_common(struct xdp_md *ctx) return xdp_mode_drop_handler(ctx, (__u16)(*port)); case XDP_MODE_TX: return xdp_mode_tx_handler(ctx, (__u16)(*port)); + case XDP_MODE_TAIL_ADJST: + return xdp_tail_ext(ctx, (__u16)(*port)); }

/* Default action is to simple pass */