From: Vijay Dhanraj vijay.dhanraj@intel.com

Add a new test case which is same as augment_via_eaccept but adds a larger number of EPC pages to stress test EAUG via EACCEPT.

Signed-off-by: Vijay Dhanraj vijay.dhanraj@intel.com Signed-off-by: Jarkko Sakkinen jarkko@kernel.org --- v7: - Contains now only the test case. Support for dynamic heap is prepared in prepending patches.

v6: - Address Reinette's feedback: https://lore.kernel.org/linux-sgx/Yw6%2FiTzSdSw%2FY%2FVO@kernel.org/

v5: - Add the klog dump and sysctl option to the commit message.

v4: - Explain expectations for dirty_page_list in the function header, instead of an inline comment. - Improve commit message to explain the conditions better. - Return the number of pages left dirty to ksgxd() and print warning after the 2nd call, if there are any.

v3: - Remove WARN_ON(). - Tuned comments and the commit message a bit.

v2: - Replaced WARN_ON() with optional pr_info() inside __sgx_sanitize_pages(). - Rewrote the commit message. - Added the fixes tag. --- tools/testing/selftests/sgx/main.c | 112 ++++++++++++++++++++++++++++- 1 file changed, 111 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index 4feffe7cd8fb..48976bb7bd79 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -23,8 +23,15 @@

static const size_t ENCL_HEAP_SIZE_DEFAULT = PAGE_SIZE; static const size_t ENCL_DYNAMIC_SIZE_DEFAULT = PAGE_SIZE; +/* + * The size was chosen based on a bug report: + * Message-ID: DM8PR11MB55912A7F47A84EC9913A6352F6999@DM8PR11MB5591.namprd11.prod.outlook.com + */ +static const size_t ENCL_DYNAMIC_SIZE_LONG = 8L * 1024L * 1024L * 1024L; +static const unsigned long TIMEOUT_DEFAULT = 900; static const uint64_t MAGIC = 0x1122334455667788ULL; static const uint64_t MAGIC2 = 0x8877665544332211ULL; + vdso_sgx_enter_enclave_t vdso_sgx_enter_enclave;

/* @@ -388,7 +395,7 @@ TEST_F(enclave, unclobbered_vdso_oversubscribed) EXPECT_EQ(self->run.user_data, 0); }

-TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) +TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, TIMEOUT_DEFAULT) { struct sgx_enclave_remove_pages remove_ioc; struct sgx_enclave_modify_types modt_ioc; @@ -1248,6 +1255,109 @@ TEST_F(enclave, augment_via_eaccept) munmap(addr, PAGE_SIZE); }

+/* + * Test for the addition of large number of pages to an initialized enclave via + * a pre-emptive run of EACCEPT on every page to be added. + */ +TEST_F_TIMEOUT(enclave, augment_via_eaccept_long, TIMEOUT_DEFAULT) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct encl_op_eaccept eaccept_op; + size_t total_size = 0; + unsigned long i; + void *addr; + + if (!sgx2_supported()) + SKIP(return, "SGX2 not supported"); + + ASSERT_TRUE(setup_test_encl_dynamic(ENCL_HEAP_SIZE_DEFAULT, + ENCL_DYNAMIC_SIZE_LONG, + &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + for (i = 0; i < self->encl.nr_segments; i++) { + struct encl_segment *seg = &self->encl.segment_tbl[i]; + + total_size += seg->size; + } + + /* + * mmap() every page at end of existing enclave to be used for + * EDMM. + */ + addr = mmap((void *)self->encl.encl_base + total_size, ENCL_DYNAMIC_SIZE_LONG, + PROT_READ | PROT_WRITE | PROT_EXEC, MAP_SHARED | MAP_FIXED, + self->encl.fd, 0); + EXPECT_NE(addr, MAP_FAILED); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Run EACCEPT on every page to trigger the #PF->EAUG->EACCEPT(again + * without a #PF). All should be transparent to userspace. + */ + eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING; + eaccept_op.ret = 0; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + for (i = 0; i < ENCL_DYNAMIC_SIZE_LONG; i += 4096) { + eaccept_op.epc_addr = (uint64_t)(addr + i); + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + if (self->run.exception_vector == 14 && + self->run.exception_error_code == 4 && + self->run.exception_addr == self->encl.encl_base) { + munmap(addr, ENCL_DYNAMIC_SIZE_LONG); + SKIP(return, "Kernel does not support adding pages to initialized enclave"); + } + + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + ASSERT_EQ(eaccept_op.ret, 0); + ASSERT_EQ(self->run.function, EEXIT); + } + + /* + * Pool of pages were successfully added to enclave. Perform sanity + * check on first page of the pool only to ensure data can be written + * to and read from a dynamically added enclave page. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = (unsigned long)addr; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory from newly added page that was just written to, + * confirming that data previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = (unsigned long)addr; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + munmap(addr, ENCL_DYNAMIC_SIZE_LONG); +} + /* * SGX2 page type modification test in two phases: * Phase 1: