In this series, Geliang did some refactoring in the mptcp_join.sh file.
Patch 1 reduces the scope of some global env vars, only used by some tests: easier to deal with.
Patch 2 uses a dedicated env var for fastclose case instead of re-using addr_nr_ns2 with embedded info, clearer.
Patch 3 is similar but for the fullmesh case.
Patch 4 moves a positional but optional argument of run_tests() to an env var like it has already been done with the other args, cleaner.
Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- Geliang Tang (4): selftests: mptcp: set all env vars as local ones selftests: mptcp: add fastclose env var selftests: mptcp: add fullmesh env var selftests: mptcp: add speed env var
tools/testing/selftests/net/mptcp/mptcp_join.sh | 271 +++++++++++++----------- 1 file changed, 151 insertions(+), 120 deletions(-) --- base-commit: e0f0a5db5f8c413cbbf48607f711c2a21023ee66 change-id: 20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-ad964224bc2a
Best regards,
From: Geliang Tang geliang.tang@suse.com
It would be better to move the declaration of all the env variables to do_transfer(), run_tests(), or pm_nl_set_endpoint() as local variables, instead of exporting them globally at the beginning of the file.
Signed-off-by: Geliang Tang geliang.tang@suse.com Reviewed-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index e6c9d5451c5b..b0aaeead56c4 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -49,11 +49,12 @@ TEST_COUNT=0 TEST_NAME="" nr_blank=40
-export FAILING_LINKS="" -export test_linkfail=0 -export addr_nr_ns1=0 -export addr_nr_ns2=0 -export sflags="" +# These var are used only in some tests, make sure they are not already set +unset FAILING_LINKS +unset test_linkfail +unset addr_nr_ns1 +unset addr_nr_ns2 +unset sflags
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" @@ -100,7 +101,6 @@ init_partial() stats_dumped=0 check_invert=0 validate_checksum=$checksum - FAILING_LINKS=""
# ns1 ns2 # ns1eth1 ns2eth1 @@ -828,6 +828,10 @@ pm_nl_set_endpoint() local connector_ns="$2" local connect_addr="$3"
+ local addr_nr_ns1=${addr_nr_ns1:-0} + local addr_nr_ns2=${addr_nr_ns2:-0} + local sflags=${sflags:-""} + # let the mptcp subflow be established in background before # do endpoint manipulation if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then @@ -979,6 +983,7 @@ do_transfer()
local port=$((10000 + TEST_COUNT - 1)) local cappid + local FAILING_LINKS=${FAILING_LINKS:-""}
:> "$cout" :> "$sout" @@ -1158,6 +1163,7 @@ run_tests() local speed="${4:-fast}"
local size + local test_linkfail=${test_linkfail:-0}
# The values above 2 are reused to make test files # with the given sizes (KB)
From: Geliang Tang geliang.tang@suse.com
Use a new env var fastclose instead of passing fastclose to addr_nr_ns2. It can be set with 'server' or 'client':
addr_nr_ns2=fastclose_client \ run_tests $ns1 $ns2 10.0.1.1
->
fastclose=client \ run_tests $ns1 $ns2 10.0.1.1.
With this change, the fullmesh flag setting code can be moved into pm_nl_set_endpoint() from do_transfer().
Signed-off-by: Geliang Tang geliang.tang@suse.com Reviewed-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index b0aaeead56c4..3e8c560938f2 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -55,6 +55,7 @@ unset test_linkfail unset addr_nr_ns1 unset addr_nr_ns2 unset sflags +unset fastclose
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" @@ -832,6 +833,12 @@ pm_nl_set_endpoint() local addr_nr_ns2=${addr_nr_ns2:-0} local sflags=${sflags:-""}
+ local flags="subflow" + if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then + flags="${flags},fullmesh" + addr_nr_ns2=${addr_nr_ns2:9} + fi + # let the mptcp subflow be established in background before # do endpoint manipulation if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then @@ -984,6 +991,7 @@ do_transfer() local port=$((10000 + TEST_COUNT - 1)) local cappid local FAILING_LINKS=${FAILING_LINKS:-""} + local fastclose=${fastclose:-""}
:> "$cout" :> "$sout" @@ -1020,11 +1028,10 @@ do_transfer() extra_args="-r ${speed:6}" fi
- local flags="subflow" local extra_cl_args="" local extra_srv_args="" local trunc_size="" - if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then + if [ -n "${fastclose}" ]; then if [ ${test_linkfail} -le 1 ]; then echo "fastclose tests need test_linkfail argument" fail_test @@ -1033,7 +1040,7 @@ do_transfer()
# disconnect trunc_size=${test_linkfail} - local side=${addr_nr_ns2:10} + local side=${fastclose}
if [ ${side} = "client" ]; then extra_cl_args="-f ${test_linkfail}" @@ -1046,10 +1053,6 @@ do_transfer() fail_test return 1 fi - addr_nr_ns2=0 - elif [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then - flags="${flags},fullmesh" - addr_nr_ns2=${addr_nr_ns2:9} fi
extra_srv_args="$extra_args $extra_srv_args" @@ -3186,7 +3189,7 @@ fullmesh_tests() fastclose_tests() { if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then - test_linkfail=1024 addr_nr_ns2=fastclose_client \ + test_linkfail=1024 fastclose=client \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_fclose_nr 1 1 @@ -3194,7 +3197,7 @@ fastclose_tests() fi
if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then - test_linkfail=1024 addr_nr_ns2=fastclose_server \ + test_linkfail=1024 fastclose=server \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_fclose_nr 1 1 invert
From: Geliang Tang geliang.tang@suse.com
Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2. It can be set with the actual value of addr_nr_ns2 now:
addr_nr_ns2=fullmesh_1 \ run_tests $ns1 $ns2 10.0.1.1
->
fullmesh=1 \ run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang geliang.tang@suse.com Reviewed-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 3e8c560938f2..5ad95cc382e6 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -56,6 +56,7 @@ unset addr_nr_ns1 unset addr_nr_ns2 unset sflags unset fastclose +unset fullmesh
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" @@ -832,11 +833,12 @@ pm_nl_set_endpoint() local addr_nr_ns1=${addr_nr_ns1:-0} local addr_nr_ns2=${addr_nr_ns2:-0} local sflags=${sflags:-""} + local fullmesh=${fullmesh:-""}
local flags="subflow" - if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then + if [ -n "${fullmesh}" ]; then flags="${flags},fullmesh" - addr_nr_ns2=${addr_nr_ns2:9} + addr_nr_ns2=${fullmesh} fi
# let the mptcp subflow be established in background before @@ -2689,7 +2691,7 @@ mixed_tests() pm_nl_set_limits $ns2 2 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal - addr_nr_ns2=fullmesh_1 \ + fullmesh=1 \ run_tests $ns1 $ns2 dead:beef:1::1 slow chk_join_nr 4 4 4 fi @@ -3102,7 +3104,7 @@ fullmesh_tests() pm_nl_set_limits $ns1 1 3 pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - addr_nr_ns2=fullmesh_1 \ + fullmesh=1 \ run_tests $ns1 $ns2 10.0.1.1 slow chk_join_nr 3 3 3 chk_add_nr 1 1 @@ -3115,7 +3117,7 @@ fullmesh_tests() pm_nl_set_limits $ns1 2 5 pm_nl_set_limits $ns2 1 5 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - addr_nr_ns2=fullmesh_2 \ + fullmesh=2 \ run_tests $ns1 $ns2 10.0.1.1 slow chk_join_nr 5 5 5 chk_add_nr 1 1 @@ -3129,7 +3131,7 @@ fullmesh_tests() pm_nl_set_limits $ns1 2 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - addr_nr_ns2=fullmesh_2 \ + fullmesh=2 \ run_tests $ns1 $ns2 10.0.1.1 slow chk_join_nr 4 4 4 chk_add_nr 1 1 @@ -3153,7 +3155,7 @@ fullmesh_tests() pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh pm_nl_set_limits $ns2 4 4 - addr_nr_ns2=fullmesh_1 sflags=nofullmesh \ + fullmesh=1 sflags=nofullmesh \ run_tests $ns1 $ns2 10.0.1.1 slow chk_join_nr 2 2 2 chk_rm_nr 0 1
From: Geliang Tang geliang.tang@suse.com
Use a new env var speed instead of using 'speed' argument of run_tests() and do_transfer(). It can be set with 'fast', 'slow', or the actual speed number:
run_tests $ns1 $ns2 10.0.1.1 slow
->
speed=slow \ run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang geliang.tang@suse.com Reviewed-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 230 +++++++++++++----------- 1 file changed, 125 insertions(+), 105 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 5ad95cc382e6..b5eeea4c3efa 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -57,6 +57,7 @@ unset addr_nr_ns2 unset sflags unset fastclose unset fullmesh +unset speed
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" @@ -988,12 +989,12 @@ do_transfer() local cl_proto="$3" local srv_proto="$4" local connect_addr="$5" - local speed="$6"
local port=$((10000 + TEST_COUNT - 1)) local cappid local FAILING_LINKS=${FAILING_LINKS:-""} local fastclose=${fastclose:-""} + local speed=${speed:-"fast"}
:> "$cout" :> "$sout" @@ -1026,8 +1027,8 @@ do_transfer() extra_args="-j" elif [ $speed = "slow" ]; then extra_args="-r 50" - elif [[ $speed = "speed_"* ]]; then - extra_args="-r ${speed:6}" + elif [ $speed -gt 0 ]; then + extra_args="-r ${speed}" fi
local extra_cl_args="" @@ -1165,7 +1166,6 @@ run_tests() local listener_ns="$1" local connector_ns="$2" local connect_addr="$3" - local speed="${4:-fast}"
local size local test_linkfail=${test_linkfail:-0} @@ -1210,7 +1210,7 @@ run_tests() make_file "$sinfail" "server" $size fi
- do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${speed} + do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} }
dump_stats() @@ -1999,7 +1999,8 @@ subflows_error_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi
@@ -2010,7 +2011,8 @@ subflows_error_tests() pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi
@@ -2021,7 +2023,8 @@ subflows_error_tests() pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi
@@ -2033,7 +2036,8 @@ subflows_error_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 slow & + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 &
# mpj subflow will be in TW after the reset wait_attempt_fail $ns2 @@ -2132,7 +2136,8 @@ signal_address_tests()
# the peer could possibly miss some addr notification, allow retransmission ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1
# It is not directly linked to the commit introducing this # symbol but for the parent one which is linked anyway. @@ -2242,7 +2247,8 @@ add_addr_timeout_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_tx_nr 4 4 chk_add_nr 4 0 @@ -2253,7 +2259,8 @@ add_addr_timeout_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal - run_tests $ns1 $ns2 dead:beef:1::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 4 0 fi @@ -2264,7 +2271,8 @@ add_addr_timeout_tests() pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_set_limits $ns2 2 2 - run_tests $ns1 $ns2 10.0.1.1 speed_10 + speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 8 0 fi @@ -2275,7 +2283,8 @@ add_addr_timeout_tests() pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_set_limits $ns2 2 2 - run_tests $ns1 $ns2 10.0.1.1 speed_10 + speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 8 0 fi @@ -2288,8 +2297,8 @@ remove_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns2=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_rm_tx_nr 1 chk_rm_nr 1 1 @@ -2301,8 +2310,8 @@ remove_tests() pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns2=-2 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=-2 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 2 2 fi @@ -2312,8 +2321,8 @@ remove_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert @@ -2325,8 +2334,8 @@ remove_tests() pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns1=-1 addr_nr_ns2=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_rm_nr 1 1 @@ -2339,8 +2348,8 @@ remove_tests() pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow - addr_nr_ns1=-1 addr_nr_ns2=-2 \ - run_tests $ns1 $ns2 10.0.1.1 speed_10 + addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 2 2 @@ -2353,8 +2362,8 @@ remove_tests() pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_set_limits $ns2 3 3 - addr_nr_ns1=-3 \ - run_tests $ns1 $ns2 10.0.1.1 speed_10 + addr_nr_ns1=-3 speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 3 3 chk_rm_nr 3 3 invert @@ -2367,8 +2376,8 @@ remove_tests() pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.14.1 flags signal pm_nl_set_limits $ns2 3 3 - addr_nr_ns1=-3 \ - run_tests $ns1 $ns2 10.0.1.1 speed_10 + addr_nr_ns1=-3 speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 3 3 chk_rm_nr 3 1 invert @@ -2381,8 +2390,8 @@ remove_tests() pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow - addr_nr_ns1=-8 addr_nr_ns2=-8 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 1 3 invert simult @@ -2395,8 +2404,8 @@ remove_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow - addr_nr_ns1=-8 addr_nr_ns2=-8 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3
if mptcp_lib_kversion_ge 5.18; then @@ -2414,8 +2423,8 @@ remove_tests() pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_set_limits $ns2 3 3 - addr_nr_ns1=-8 addr_nr_ns2=-8 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 3 3 chk_rm_nr 3 3 invert simult @@ -2428,8 +2437,8 @@ remove_tests() pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.14.1 flags signal pm_nl_set_limits $ns2 3 3 - addr_nr_ns1=-8 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-8 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 3 3 chk_rm_nr 3 1 invert @@ -2440,8 +2449,8 @@ remove_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns2=-9 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=-9 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_rm_nr 1 1 fi @@ -2451,8 +2460,8 @@ remove_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=-9 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-9 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert @@ -2465,8 +2474,8 @@ add_tests() if reset "add single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 - addr_nr_ns2=1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi
@@ -2474,8 +2483,8 @@ add_tests() if reset "add signal address"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi @@ -2484,8 +2493,8 @@ add_tests() if reset "add multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - addr_nr_ns2=2 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=2 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 fi
@@ -2493,8 +2502,8 @@ add_tests() if reset "add multiple subflows IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - addr_nr_ns2=2 \ - run_tests $ns1 $ns2 dead:beef:1::1 slow + addr_nr_ns2=2 speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 fi
@@ -2502,8 +2511,8 @@ add_tests() if reset "add multiple addresses IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 - addr_nr_ns1=2 \ - run_tests $ns1 $ns2 dead:beef:1::1 slow + addr_nr_ns1=2 speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_add_nr 2 2 fi @@ -2516,14 +2525,16 @@ ipv6_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow - run_tests $ns1 $ns2 dead:beef:1::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 fi
# add_address, unused IPv6 if reset "unused signal address IPv6"; then pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal - run_tests $ns1 $ns2 dead:beef:1::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 0 0 0 chk_add_nr 1 1 fi @@ -2533,7 +2544,8 @@ ipv6_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 1 - run_tests $ns1 $ns2 dead:beef:1::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi @@ -2543,8 +2555,8 @@ ipv6_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=-1 \ - run_tests $ns1 $ns2 dead:beef:1::1 slow + addr_nr_ns1=-1 speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert @@ -2556,8 +2568,8 @@ ipv6_tests() pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow - addr_nr_ns1=-1 addr_nr_ns2=-1 \ - run_tests $ns1 $ns2 dead:beef:1::1 slow + addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_rm_nr 1 1 @@ -2658,7 +2670,8 @@ mixed_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi
@@ -2668,7 +2681,8 @@ mixed_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.1.1 flags signal - run_tests $ns1 $ns2 dead:beef:2::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:2::1 chk_join_nr 1 1 1 fi
@@ -2679,7 +2693,8 @@ mixed_tests() pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh pm_nl_add_endpoint $ns1 10.0.1.1 flags signal - run_tests $ns1 $ns2 dead:beef:2::1 slow + speed=slow \ + run_tests $ns1 $ns2 dead:beef:2::1 chk_join_nr 1 1 1 fi
@@ -2691,8 +2706,8 @@ mixed_tests() pm_nl_set_limits $ns2 2 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal - fullmesh=1 \ - run_tests $ns1 $ns2 dead:beef:1::1 slow + fullmesh=1 speed=slow \ + run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 4 4 4 fi } @@ -2705,8 +2720,8 @@ backup_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup - sflags=nobackup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=nobackup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_prio_nr 0 1 fi @@ -2717,8 +2732,8 @@ backup_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 - sflags=backup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=backup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_prio_nr 1 1 @@ -2730,8 +2745,8 @@ backup_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 1 - sflags=backup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=backup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_prio_nr 1 1 @@ -2740,7 +2755,8 @@ backup_tests() if reset "mpc backup" && continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 0 1 fi @@ -2749,7 +2765,8 @@ backup_tests() continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup - run_tests $ns1 $ns2 10.0.1.1 slow + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 1 1 fi @@ -2757,8 +2774,8 @@ backup_tests() if reset "mpc switch to backup" && continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow - sflags=backup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=backup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 0 1 fi @@ -2767,8 +2784,8 @@ backup_tests() continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow - sflags=backup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=backup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 1 1 fi @@ -2857,8 +2874,8 @@ add_addr_ports_tests() pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 1 - addr_nr_ns1=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 1 chk_rm_nr 1 1 invert @@ -2874,8 +2891,8 @@ add_addr_ports_tests() pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns1=-1 addr_nr_ns2=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 1 chk_rm_nr 1 1 @@ -2888,8 +2905,8 @@ add_addr_ports_tests() pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow - addr_nr_ns1=-8 addr_nr_ns2=-2 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=-8 addr_nr_ns2=-2 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 1 3 invert simult @@ -3091,8 +3108,8 @@ fullmesh_tests() pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh - addr_nr_ns1=1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns1=1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 4 4 4 chk_add_nr 1 1 fi @@ -3104,8 +3121,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 1 3 pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - fullmesh=1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + fullmesh=1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 fi @@ -3117,8 +3134,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 2 5 pm_nl_set_limits $ns2 1 5 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - fullmesh=2 \ - run_tests $ns1 $ns2 10.0.1.1 slow + fullmesh=2 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 5 5 5 chk_add_nr 1 1 fi @@ -3131,8 +3148,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 2 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - fullmesh=2 \ - run_tests $ns1 $ns2 10.0.1.1 slow + fullmesh=2 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 4 4 4 chk_add_nr 1 1 fi @@ -3143,8 +3160,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 - addr_nr_ns2=1 sflags=fullmesh \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=1 sflags=fullmesh speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 0 1 fi @@ -3155,8 +3172,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh pm_nl_set_limits $ns2 4 4 - fullmesh=1 sflags=nofullmesh \ - run_tests $ns1 $ns2 10.0.1.1 slow + fullmesh=1 sflags=nofullmesh speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 0 1 fi @@ -3167,8 +3184,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 - addr_nr_ns2=1 sflags=backup,fullmesh \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_prio_nr 0 1 chk_rm_nr 0 1 @@ -3180,8 +3197,8 @@ fullmesh_tests() pm_nl_set_limits $ns1 4 4 pm_nl_set_limits $ns2 4 4 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh - sflags=nobackup,nofullmesh \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=nobackup,nofullmesh speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_prio_nr 0 1 chk_rm_nr 0 1 @@ -3356,8 +3373,8 @@ userspace_tests() pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - sflags=backup \ - run_tests $ns1 $ns2 10.0.1.1 slow + sflags=backup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 chk_prio_nr 0 0 fi @@ -3370,8 +3387,8 @@ userspace_tests() pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - addr_nr_ns2=-1 \ - run_tests $ns1 $ns2 10.0.1.1 slow + addr_nr_ns2=-1 speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_rm_nr 0 0 fi @@ -3381,7 +3398,8 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 1 1 - run_tests $ns1 $ns2 10.0.1.1 speed_10 & + speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns1 userspace_pm_add_addr 10.0.2.1 10 @@ -3401,7 +3419,8 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - run_tests $ns1 $ns2 10.0.1.1 speed_10 & + speed=10 \ + run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns2 userspace_pm_add_sf 10.0.3.2 20 @@ -3424,7 +3443,8 @@ endpoint_tests() pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 slow 2>/dev/null & + speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
wait_mpj $ns1 pm_nl_check_endpoint 1 "creation" \ @@ -3447,8 +3467,8 @@ endpoint_tests() pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow - test_linkfail=4 \ - run_tests $ns1 $ns2 10.0.1.1 speed_20 2>/dev/null & + test_linkfail=4 speed=20 \ + run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
wait_mpj $ns2 chk_subflow_nr needtitle "before delete" 2
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski kuba@kernel.org:
On Wed, 12 Jul 2023 18:03:15 +0200 you wrote:
In this series, Geliang did some refactoring in the mptcp_join.sh file.
Patch 1 reduces the scope of some global env vars, only used by some tests: easier to deal with.
Patch 2 uses a dedicated env var for fastclose case instead of re-using addr_nr_ns2 with embedded info, clearer.
[...]
Here is the summary with links: - [net-next,1/4] selftests: mptcp: set all env vars as local ones https://git.kernel.org/netdev/net-next/c/662aa22d7dcd - [net-next,2/4] selftests: mptcp: add fastclose env var https://git.kernel.org/netdev/net-next/c/080b7f5733fd - [net-next,3/4] selftests: mptcp: add fullmesh env var https://git.kernel.org/netdev/net-next/c/4aadde088a58 - [net-next,4/4] selftests: mptcp: add speed env var https://git.kernel.org/netdev/net-next/c/e571fb09c893
You are awesome, thank you!
linux-kselftest-mirror@lists.linaro.org
-
Matthieu Baerts -
patchwork-bot+netdevbpf＠kernel.org