v2: - add a-bs - add examples for non-anon tests [Mike] - use brackets properly for nested ifs [Mike]
Recently I wrote some uffd write-protection test for the not-yet-published uffd-wp tree, and I picked these common patches out first for the selftest which even suite for master.
Any feedback is welcomed. Please have a look, thanks.
Peter Xu (3): userfaultfd: selftest: cleanup help messages userfaultfd: selftest: generalize read and poll userfaultfd: selftest: recycle lock threads first
tools/testing/selftests/vm/userfaultfd.c | 134 +++++++++++++---------- 1 file changed, 77 insertions(+), 57 deletions(-)
Firstly, the help in the comment region is obsolete, now we support three parameters. Since at it, change it and move it into the help message of the program.
Also, the help messages dumped here and there is obsolete too. Use a single usage() helper.
Acked-by: Mike Rapoport rppt@linux.vnet.ibm.com Signed-off-by: Peter Xu peterx@redhat.com --- tools/testing/selftests/vm/userfaultfd.c | 46 ++++++++++++++---------- 1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 7b8171e3128a..5ff3a4f9173e 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -34,18 +34,6 @@ * per-CPU threads 1 by triggering userfaults inside * pthread_mutex_lock will also verify the atomicity of the memory * transfer (UFFDIO_COPY). - * - * The program takes two parameters: the amounts of physical memory in - * megabytes (MiB) of the area and the number of bounces to execute. - * - * # 100MiB 99999 bounces - * ./userfaultfd 100 99999 - * - * # 1GiB 99 bounces - * ./userfaultfd 1000 99 - * - * # 10MiB-~6GiB 999 bounces, continue forever unless an error triggers - * while ./userfaultfd $[RANDOM % 6000 + 10] 999; do true; done */
#define _GNU_SOURCE @@ -115,6 +103,30 @@ pthread_attr_t attr; ~(unsigned long)(sizeof(unsigned long long) \ - 1)))
+const char *examples = + "# Run anonymous memory test on 100MiB region with 99999 bounces:\n" + "./userfaultfd anon 100 99999\n\n" + "# Run share memory test on 1GiB region with 99 bounces:\n" + "./userfaultfd shmem 1000 99\n\n" + "# Run hugetlb memory test on 256MiB region with 50 bounces (using /dev/hugepages/hugefile):\n" + "./userfaultfd hugetlb 256 50 /dev/hugepages/hugefile\n\n" + "# Run the same hugetlb test but using shmem:\n" + "./userfaultfd hugetlb_shared 256 50 /dev/hugepages/hugefile\n\n" + "# 10MiB-~6GiB 999 bounces anonymous test, " + "continue forever unless an error triggers\n" + "while ./userfaultfd anon $[RANDOM % 6000 + 10] 999; do true; done\n\n"; + +static void usage(void) +{ + fprintf(stderr, "\nUsage: ./userfaultfd <test type> <MiB> <bounces> " + "[hugetlbfs_file]\n\n"); + fprintf(stderr, "Supported <test type>: anon, hugetlb, " + "hugetlb_shared, shmem\n\n"); + fprintf(stderr, "Examples:\n\n"); + fprintf(stderr, examples); + exit(1); +} + static int anon_release_pages(char *rel_area) { int ret = 0; @@ -1272,8 +1284,7 @@ static void sigalrm(int sig) int main(int argc, char **argv) { if (argc < 4) - fprintf(stderr, "Usage: <test type> <MiB> <bounces> [hugetlbfs_file]\n"), - exit(1); + usage();
if (signal(SIGALRM, sigalrm) == SIG_ERR) fprintf(stderr, "failed to arm SIGALRM"), exit(1); @@ -1286,20 +1297,19 @@ int main(int argc, char **argv) nr_cpus; if (!nr_pages_per_cpu) { fprintf(stderr, "invalid MiB\n"); - fprintf(stderr, "Usage: <MiB> <bounces>\n"), exit(1); + usage(); }
bounces = atoi(argv[3]); if (bounces <= 0) { fprintf(stderr, "invalid bounces\n"); - fprintf(stderr, "Usage: <MiB> <bounces>\n"), exit(1); + usage(); } nr_pages = nr_pages_per_cpu * nr_cpus;
if (test_type == TEST_HUGETLB) { if (argc < 5) - fprintf(stderr, "Usage: hugetlb <MiB> <bounces> <hugetlbfs_file>\n"), - exit(1); + usage(); huge_fd = open(argv[4], O_CREAT | O_RDWR, 0755); if (huge_fd < 0) { fprintf(stderr, "Open of %s failed", argv[3]);
We do very similar things in read and poll modes, but we're copying the codes around. Share the codes properly on reading the message and handling the page fault to make the code cleaner. Meanwhile this solves previous mismatch of behaviors between the two modes on that the old code:
- did not check EAGAIN case in read() mode - ignored BOUNCE_VERIFY check in read() mode
Signed-off-by: Peter Xu peterx@redhat.com --- tools/testing/selftests/vm/userfaultfd.c | 77 +++++++++++++----------- 1 file changed, 43 insertions(+), 34 deletions(-)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 5ff3a4f9173e..7a8c6937cc67 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -451,6 +451,43 @@ static int copy_page(int ufd, unsigned long offset) return __copy_page(ufd, offset, false); }
+static int uffd_read_msg(int ufd, struct uffd_msg *msg) +{ + int ret = read(uffd, msg, sizeof(*msg)); + + if (ret != sizeof(*msg)) { + if (ret < 0) { + if (errno == EAGAIN) + return 1; + else + perror("blocking read error"), exit(1); + } else { + fprintf(stderr, "short read\n"), exit(1); + } + } + + return 0; +} + +/* Return 1 if page fault handled by us; otherwise 0 */ +static int uffd_handle_page_fault(struct uffd_msg *msg) +{ + unsigned long offset; + + if (msg->event != UFFD_EVENT_PAGEFAULT) + fprintf(stderr, "unexpected msg event %u\n", + msg->event), exit(1); + + if (bounces & BOUNCE_VERIFY && + msg->arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE) + fprintf(stderr, "unexpected write fault\n"), exit(1); + + offset = (char *)(unsigned long)msg->arg.pagefault.address - area_dst; + offset &= ~(page_size-1); + + return copy_page(uffd, offset); +} + static void *uffd_poll_thread(void *arg) { unsigned long cpu = (unsigned long) arg; @@ -458,7 +495,6 @@ static void *uffd_poll_thread(void *arg) struct uffd_msg msg; struct uffdio_register uffd_reg; int ret; - unsigned long offset; char tmp_chr; unsigned long userfaults = 0;
@@ -482,25 +518,15 @@ static void *uffd_poll_thread(void *arg) if (!(pollfd[0].revents & POLLIN)) fprintf(stderr, "pollfd[0].revents %d\n", pollfd[0].revents), exit(1); - ret = read(uffd, &msg, sizeof(msg)); - if (ret < 0) { - if (errno == EAGAIN) - continue; - perror("nonblocking read error"), exit(1); - } + if (uffd_read_msg(uffd, &msg)) + continue; switch (msg.event) { default: fprintf(stderr, "unexpected msg event %u\n", msg.event), exit(1); break; case UFFD_EVENT_PAGEFAULT: - if (msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE) - fprintf(stderr, "unexpected write fault\n"), exit(1); - offset = (char *)(unsigned long)msg.arg.pagefault.address - - area_dst; - offset &= ~(page_size-1); - if (copy_page(uffd, offset)) - userfaults++; + userfaults += uffd_handle_page_fault(&msg); break; case UFFD_EVENT_FORK: close(uffd); @@ -528,8 +554,6 @@ static void *uffd_read_thread(void *arg) { unsigned long *this_cpu_userfaults; struct uffd_msg msg; - unsigned long offset; - int ret;
this_cpu_userfaults = (unsigned long *) arg; *this_cpu_userfaults = 0; @@ -538,24 +562,9 @@ static void *uffd_read_thread(void *arg) /* from here cancellation is ok */
for (;;) { - ret = read(uffd, &msg, sizeof(msg)); - if (ret != sizeof(msg)) { - if (ret < 0) - perror("blocking read error"), exit(1); - else - fprintf(stderr, "short read\n"), exit(1); - } - if (msg.event != UFFD_EVENT_PAGEFAULT) - fprintf(stderr, "unexpected msg event %u\n", - msg.event), exit(1); - if (bounces & BOUNCE_VERIFY && - msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE) - fprintf(stderr, "unexpected write fault\n"), exit(1); - offset = (char *)(unsigned long)msg.arg.pagefault.address - - area_dst; - offset &= ~(page_size-1); - if (copy_page(uffd, offset)) - (*this_cpu_userfaults)++; + if (uffd_read_msg(uffd, &msg)) + continue; + (*this_cpu_userfaults) += uffd_handle_page_fault(&msg); } return (void *)NULL; }
On Sun, Sep 30, 2018 at 03:42:58PM +0800, Peter Xu wrote:
We do very similar things in read and poll modes, but we're copying the codes around. Share the codes properly on reading the message and handling the page fault to make the code cleaner. Meanwhile this solves previous mismatch of behaviors between the two modes on that the old code:
- did not check EAGAIN case in read() mode
- ignored BOUNCE_VERIFY check in read() mode
Signed-off-by: Peter Xu peterx@redhat.com
Acked-by: Mike Rapoport rppt@linux.vnet.ibm.com
tools/testing/selftests/vm/userfaultfd.c | 77 +++++++++++++----------- 1 file changed, 43 insertions(+), 34 deletions(-)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 5ff3a4f9173e..7a8c6937cc67 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -451,6 +451,43 @@ static int copy_page(int ufd, unsigned long offset) return __copy_page(ufd, offset, false); }
+static int uffd_read_msg(int ufd, struct uffd_msg *msg) +{
- int ret = read(uffd, msg, sizeof(*msg));
- if (ret != sizeof(*msg)) {
if (ret < 0) {if (errno == EAGAIN)return 1;elseperror("blocking read error"), exit(1);} else {fprintf(stderr, "short read\n"), exit(1);}- }
- return 0;
+}
+/* Return 1 if page fault handled by us; otherwise 0 */ +static int uffd_handle_page_fault(struct uffd_msg *msg) +{
- unsigned long offset;
- if (msg->event != UFFD_EVENT_PAGEFAULT)
fprintf(stderr, "unexpected msg event %u\n",msg->event), exit(1);- if (bounces & BOUNCE_VERIFY &&
msg->arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE)fprintf(stderr, "unexpected write fault\n"), exit(1);- offset = (char *)(unsigned long)msg->arg.pagefault.address - area_dst;
- offset &= ~(page_size-1);
- return copy_page(uffd, offset);
+}
static void *uffd_poll_thread(void *arg) { unsigned long cpu = (unsigned long) arg; @@ -458,7 +495,6 @@ static void *uffd_poll_thread(void *arg) struct uffd_msg msg; struct uffdio_register uffd_reg; int ret;
- unsigned long offset; char tmp_chr; unsigned long userfaults = 0;
@@ -482,25 +518,15 @@ static void *uffd_poll_thread(void *arg) if (!(pollfd[0].revents & POLLIN)) fprintf(stderr, "pollfd[0].revents %d\n", pollfd[0].revents), exit(1);
ret = read(uffd, &msg, sizeof(msg));if (ret < 0) {if (errno == EAGAIN)continue;perror("nonblocking read error"), exit(1);}
if (uffd_read_msg(uffd, &msg))continue;
if (msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE)fprintf(stderr, "unexpected write fault\n"), exit(1);offset = (char *)(unsigned long)msg.arg.pagefault.address -area_dst;offset &= ~(page_size-1);if (copy_page(uffd, offset))userfaults++;
userfaults += uffd_handle_page_fault(&msg); break;@@ -528,8 +554,6 @@ static void *uffd_read_thread(void *arg) { unsigned long *this_cpu_userfaults; struct uffd_msg msg;
unsigned long offset;
int ret;
this_cpu_userfaults = (unsigned long *) arg; *this_cpu_userfaults = 0;
@@ -538,24 +562,9 @@ static void *uffd_read_thread(void *arg) /* from here cancellation is ok */
for (;;) {
ret = read(uffd, &msg, sizeof(msg));if (ret != sizeof(msg)) {if (ret < 0)perror("blocking read error"), exit(1);elsefprintf(stderr, "short read\n"), exit(1);}if (msg.event != UFFD_EVENT_PAGEFAULT)fprintf(stderr, "unexpected msg event %u\n",msg.event), exit(1);if (bounces & BOUNCE_VERIFY &&msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WRITE)fprintf(stderr, "unexpected write fault\n"), exit(1);offset = (char *)(unsigned long)msg.arg.pagefault.address -area_dst;offset &= ~(page_size-1);if (copy_page(uffd, offset))(*this_cpu_userfaults)++;
if (uffd_read_msg(uffd, &msg))continue;(*this_cpu_userfaults) += uffd_handle_page_fault(&msg);}
2.17.1
Now we recycle the uffd servicing threads earlier than the lock threads. It might happen that when the lock thread is still blocked at a pthread mutex lock while the servicing thread has already quitted for the cpu so the lock thread will be blocked forever and hang the test program. To fix the possible race, recycle the lock threads first.
This never happens with current missing-only tests, but when I start to run the write-protection tests (the feature is not yet posted upstream) it happens every time of the run possibly because in that new test we'll need to service two page faults for each lock operation.
Acked-by: Mike Rapoport rppt@linux.vnet.ibm.com Signed-off-by: Peter Xu peterx@redhat.com --- tools/testing/selftests/vm/userfaultfd.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 7a8c6937cc67..5d1db824f73a 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -626,6 +626,12 @@ static int stress(unsigned long *userfaults) if (uffd_test_ops->release_pages(area_src)) return 1;
+ + finished = 1; + for (cpu = 0; cpu < nr_cpus; cpu++) + if (pthread_join(locking_threads[cpu], NULL)) + return 1; + for (cpu = 0; cpu < nr_cpus; cpu++) { char c; if (bounces & BOUNCE_POLL) { @@ -643,11 +649,6 @@ static int stress(unsigned long *userfaults) } }
- finished = 1; - for (cpu = 0; cpu < nr_cpus; cpu++) - if (pthread_join(locking_threads[cpu], NULL)) - return 1; - return 0; }
linux-kselftest-mirror@lists.linaro.org
-
Mike Rapoport -
Peter Xu